get date

Similar Questions

• How to fix or get data off Mac Pro with display/restart issues

  Hi, my early 2008 Mac Pro running El Capitan suddenly started to show lines all over the screen, then it restarted, displaying an error message and since then he's been stuck in a reboot loop never get past the progress bar and with very distorted display. Two questions:

  (1) any solution to this? It is an old machine, worked great so I would like to continue using it if possible, but do not want to put money in it at this stage.

  (2) what is the best way to get data out of the two internal drives to the machine on my Mac Air? I need to access the files on it, also like his 2 x 1 TB hard drives I will not be able to transfer the data on Air, but you will need to use them as external drives.

  Help appreciated!

  Get a dock like this

  http://www.felinediabetes.com/FDMB/forums/feline-health-the-main-forum.28/

  and take the readers on the Mac Pro and put them in the dock and connect to new mac via USB

  You can also get an enclosure that accept disks 3 1/2 in.

  In addition, you can get a bolt of lightning > FireWire adopter and connect the two Macs via FireWire and start the old mac in target disk mode

  How to use and troubleshoot disk mode target FireWire - Apple Support

  The error message say? Problem could be the graphics card bad or maybe bad memory.

  If you open the side cover are all diagnostic lights on?

• How to get data from excel

  Hello world

  How can I get data from excel inside my program? I'm using labview 8.2. I have tried to find the solution for this but seems that the solutions are not suitable. Can someone help me? Thank you.

  Hi jieah,

  Inside of the attachment nijams don't you see this?

  read_excel_values. LLB

• Office toolkit 'excel get data' cannot read anything else of integers?

  I use LabVIEW 2009 and can not get LabVIEW to read non-entiers to a worksheet.  In the attached example, I put a breaktpoint after the new report vi, and and when it hits at this breakpoint I put a number as 1,234 in cell A1, and then continue execution.  But the 'data' outputs always return an integer value.  Even tried to change the format of the output of the data field.  I also tried to replace this with vi (LDM) Excel Get Data in the folder of the Toolbox, but got the same result.

  When I tried the same thing in LabVIEW 8.0 it worked.  No idea what I am doing wrong?  :-)

  Thank you

  -Bill

  Your meter is complete after you have changed the type of indicatpr, then you can get good results.

• Apparent problem with OpenG Get Data Name_ogtk.vi

  The data Name_ogtk.vi Get OpenG is a function that takes a data Structure and returns the name of this structure if the Data Structure has a name.

  I use it in my Configure.vi. Configure.VI takes several data structures and saves / loads to an INI file. The name of the section in the INI file is the same as the name of the Data Structure. When loading, Configure.vi takes the name of the data structure to load and locate the Section in the INI file with the same name and then uses the items listed in the INI section to load the Data Structure with the data values.

  In my case, I have 3 sections. Two of the sections, 1 Servo and Servo 2 derive from the same Type definition. I am trying to load 3 of the attached INI file data Structure. The Config.ini in the system file has been generated by the backup function Configure.vi. I'm passing in the routine of the load, 3 Data Structures, each with unique names. I have an explicit call to get the data for Servo 1 Name.vi and 2 Servo. But the probes on the output of the Name.vi of data values get two return to the same 'Servo 1' same string if sensors on the Structure of data entries that clearly indicate them the unique names of the "Servo 1" and "Servo 2" respectively.

  It seems that the 2nd Get data name returns the name of the Data Structure 1 by mistake. If anyone can check this?

  Does anyone know how to fix Get Data Name.vi so that it returns the appropriate data Structure names?

  Thank you.

  I was able to reproduce it and I show here as an oddity to force entry to the variant on the primitive flat string Variant.

  Basically, if you have more than one cluster with content command to match the type and order wired directly to this function, it returns the flattened string which is first to each call.  The wires must be wired without before converting to alternative, if you have points of constraint.

  This only happens if you feed directly the input varying both and get the stress points.  If you are using a variant is not the case.

  I found that this occurs if the cluster is of type defined, and it does not occur for constants.  I didn't try other controls.  I'll be honest, I'm usually used to constrain to the Variant.  I'll be more careful in the future!

  ----

  so convert to first variant will solve your problem.  In addition, if you leave the entry of the section name of the variant config openG write screw unwired, he will take the name as it is the research of the control, you did, so you need not the name of data Get there at all.

  An excerpt from 2009.  as - is equal to true.  The bunches are each a dbl and a bool, but each FP different controls.

  

• Y510 unable to get data from the camera.

  Hello

  I have a Y510 with Windows Vista 32 bit, 3 GB RAM, only 5 weeks. I get this message when I try to use Veriface, "unable to get data from the camera. The camera may have been disconnected or busy. I reinstalled Vista of the State in which the laptop came, but it does not work. I also updated the bios and install other updates were available. I would appreciate any advice.

  Thank you

  Peter

  I wish it was as easy as press Fn + Esc, I looked through an another Y510 our office and managed to find a process that must be set to Auto, the process is KtmRm. This process cannot be disabled, handicapped, or on a time delay, it must be AUTOMATIC.

• get date and time seconds

  I am using get date time in seconds, the function to send the date and time to a sub vi where I can use it to calculate the time difference in timestamps of waveform and the hour when he began to get the time in seconds. So I wanted to know if I pass this value to a sub - vi will be this value constantly updated in the sub - vi or it will remain constant until the sub - vi is finished.

  Yes it will remain constant because the time was read only once, to hand.  Any value is passed to the Subvi remains the same.  If you want once updated, you must put the function get Date/time inside the Subvi.

• Getting data from the nodes of event data

  Hi all

  I have a while loop with a Structure of the event and a Structure of case inside. The Structure of the event a lot of cases, and each of them is controlled by a different object (buttons, sliders, graphics, etc.). Sometimes, I have to use data from the nodes of event data to power a Business Structure that works like a State Machine in my code. To clean the block diagram, I want to 'export' data nodes using a single wire event data, but this is not possible because there is a conflict of data, since I get data of CtlRef in one case and Coords in others (for example).

  To resolve this problem, I'm feeding a beam to create a cluster and feed it to the box Structure data. However, the process is so painful, because I have to feed the Bundle function with constants of all sorts of data connected to him.

  Find attached an example. It is not the actual code but shows what I have to do.

  Thank you

  Dan07

  Why you do not pass a Variant to the structure of the case. In your case case simply make a variant of the appropriate data that you want to pass. I guess the case appropriate business structure will be to get called for the event. Given that you need to know the data type this case awaits can use the variant data VI and now you have the data you want.

• Can all help with VI to get data (HEX) serial number and write in the text file

  Hello I am struggling with this problem for 2 months... They get help from different I thought I solved the problem, but of no use yet I stand on zero

  Problem: I need to get data on USB high speed HEXAGON shaped (coming in hexadecimal and be stored in the text file to the hexadecimal format as each hexadecimal value online different I'll also to attach the file)

  Get us ASCII on series or VISA read but when trying to convert to hex as shown in text file making it slower to deal with code, I know that my VI will have to improve more... I'm waiting for suggestions

  Need urgent help...

  Thanks in advance

  Hi Ali Afzal,.

  I think that the attached example can work for you. If not, then try the solution with sending the data to a parallel running the loop and store it there.

  Mike

• How to get data from an Excel file exist using report generation tools

  I try to use the Excel vi get the data of the report generation tool, but I can't understand how to activate a path can be explored in the right type for the VI.  I tried to use the new Report.vi, but this does not work unless you use a template.  It will not open an existing excel file and make an open report to extract data from.

  Essentially, I have a bunch of excel files that have data in them, and I want a VI allows to analyze the data.  I'm going to pull in all the data directly from the excel file so I don't have to reproscess them all in text so I can use the more standard datasheet live but to convert even the excel file programtically in labview I still need to be able to open the excel file and get the data?

  I found my problem.  It turns out that only not to have had a problem with the tool box new report vi.  I had accidentally wired an input control of path of folder instead of an input control of path of file to it.  Changing the file type took care of her and I was able to access excel files, I tried using the new report VI to extract the file, and Excel Get Data to extract the data.

• Get data from transient attribute to another VO

  Hello

  I created a transitional attribute in a table, how do I get the data in the other table.

  My requirement is

  I have two tables are ministries and officials, Dept_effect_date is a field in the departments, I need this field with data in the original Version used. I created the transitional VO employees with the same name attribute, but can't hw I get data data same Department for emp?

  Sainaba

  You can get the value of the current row in the main table and place it in the secondary table.

  Line curRow = masterVo.getCurrentRow ();

  or if you have a relationship master detail then go into your viewLink and see the name of the accessor here and write your expression like this

  accesorName.attributeName

  to refer to see - ADF tutorial: transient attributes and how to complete the & #8211; Part 1 | Oralublog - Oralution & #039; s Blog

• How to get data from vROps?

  Hello

  In older versions, we could get out vROps via an adapter of repository data. But with vROps 6.0, I couldn't find that everything about repository adapter and the other as the HTTP Post adapter. I've seen a few posts on CaSa API and SDK, but there is no documentation on this topic. What can I use to get data on how do I configure it? I'll be happy if I can help.

  Kind regards

  Ramazan

  Hi Ramazan

  The API of CaSA is Cluster and Administration of the Group and is located at https://vrops-url/casa

  I have not found any documentation for it.

  What you need is https://vrops-urlsuite - api

  It is a small site with sample code and complete documentation. You can even call the API directly from your browser!

  Start with this, for example: https://vrops-url/suite-api/api/resources? name =something

  Kind regards

  Michael

• Find the beginning and end of a month using get-date

  I am currently using get-date to run reports on past events by subtracting the number of days from the current date.  I would like to make the report so that it automatically determines which was the previous month and captures all events for this date range.

  For example, if it's on 6 February, the report capture data from January 1 to January 31.  If it's on March 23, the report capture events from February 1 to February 28.

  Is this possible?  Here's my current status:

  Get-VIEvent-beginning (Get-Date). AddDays(-35)-done (Get-Date). AddDays(-5)

  Thank you

  Try something like this

  $now = get-Date-time-Minute 0 - 0 - 0 second

  $daysBack = - $now. Day + 1

  $Start = $now. AddMonths(-1). AddDays ($daysBack)

  $DaysInMonth = [DateTime]: DaysInMonth($Start.Year,$Start.Month)

  $Finish = $Start.AddDays ($DaysInMonth)

• Get-Date comparisons

  This question is not specifically related to PowerCLI, but I am migrating virtual machines VMFS NFS storage of data, but only in a time window of some.  There is probably a better way to do it, but I'm not the greatest at that.  Please enlighten me if there is.  No doubt I'm missing something obvious.

  My script works with the exception of the time window that we use is from 22:00 to 06:00, and logic - gt and lt - seems to break through midnight.  I have this will probably launch with a scheduled Windows task.

  $vmlist = Get-Cluster $prodCluster | Get-VM | Select Name,ProvisionedSpaceGB,UsedSpaceGB | Where-Object {$_.UsedSpaceGB -gt "75" -and $_.UsedSpaceGB -lt "250" } | Sort -Descending -Property UsedSpaceGB
  foreach ($migvm in $vmlist){
  IF (((Get-Date) -gt (Get-Date -Hour 22 -Minute 00)) -and ((Get-Date) -lt (Get-Date -Hour 06 -Minute 00)))
  { Move-VM -VM $migvm.name -DiskStorageFormat Thin -Datastore $destDatastore -Destination $prodCluster -WhatIf:$true
  }ELSE{
  Write-Host "Outside of operating hours, ignoring migration"
  }}
  
  

  Hello, BradCalvert-

  Of course, there are several ways to do it, but your path should do as well.  The only thing that is 'break' after midnight: the logical operator you use on line 03, '- and '.  In order to have this statement are evaluated to $true when the time is after 10 p.m. or before 6 in the morning, which should be a, '- or ' instead.

  Another similar method would be simply to pass the date each time that once the foreach statement (once by the virtual machine in the list of migration) and its property hours (or TotalHours) compares the desired values (22: 6).  A minor difference, but it is less than 75% of the calls to Get-Date.  And not that Get-Date is particularly expensive, but effective is good.

  In any case, it is better for you when you use the '- or ' operator instead of '- and '?

• Get data from a member of the region partitioned customer

  Hello

  I have a partitioned area, this region is in all 3 members, is it possible to get data from this region but only from 1 member of the customer, if so how?

  What is your definition of the region on the server? The three members have given? You set redundant copies? In addition, if the optimizeForWrite() of the service method returns false, the function will run the smallest number of nodes.

  Follow these steps:

  The redundant copies of the value = 1

  Returns true for optimizeForWrite()

  Make sure that all members contain primary buckets

  Perform function like you do above

  Barry

• How do you get data mulib downloads?

  How do you get data mulib downloads?

  They are on my desk. What should I do to have access to them in Muse?

  PAM

  DoubleClick just mulib file and it will install.

  Subsequently, you will find the new mulib in your library panel.