Get Dslauncher stopped working on my laptop.
This problem is on my laptop a few weeks ago.
It appears randomly
Dslauncher already installed in my laptop of society.
I use the Basic Home Edition of Windows 7
Message is "Dslauncher has stopped working".
Tell me what to do?
Hello
Check the following troubleshooting methods and if they help you.
Method 1:
As a work-around, we're going to uninstall and reinstall the Launcher of DS to the computer and check if it works.
Uninstall or change a program
http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program
Method 2:
Once you have reinstalled the program, you can install the updates in the clean boot state and check the status.
I suggest you to start the computer in a clean boot state and check the results.
A clean boot helps eliminate software conflicts and determine what is the cause of the problem. Perform a clean boot on the computer by following the steps in the link.
Alternatively, you can display the query in Dell support for more information forums.
http://en.community.Dell.com/support-forums/default.aspx
Hope this information helps. Response with status so that we can help you.
Tags: Windows
Similar Questions
-
Windows Vista Basic has stopped working on my laptop.
After my recent updates, Windows Vista Basic has stopped working on my laptop.
After my recent updates, Windows Vista Basic has stopped working on my laptop.
Hey shousell
stoppped working covers a lot
If you can not start, follow these steps
1st thing to try is a restoration of the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
or transfer your question in forum windows update link below
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
Walter, the time zone traveller
-
HP Simpletouch stop working on my laptop ENY 6 m how trouble shoot
HP Simpletouch stop working on my laptop ENY 6 m how trouble shoot?
Hi BigMike,
Welcome to the HP Forum!
SimpleTouch is a Nook eReader. ?
If you mean SimplePass, then
start by:
- Unplug everything from the laptop,
- It stops completely
- Perform the Hard Reset . Start the computer and connect
Then, take a look at this guide:
Simple Instructions for upgrade HP SimplePass
Click on the star of congratulations !
It's a nice way of saying 'Thank you' for help.
Although I strive to reflect best practices of HP, I do not work for HP.
-
Audio suddenly stopped working on my laptop
My audio suddenly stopped working on my laptop. It runs on windows 8, and it's an acer. I tried restarting the computer and troubleshooting audio through the control panel. Netflix is said the problem is related to Silverlight, but it seems to work very well. I tried to uninstall and install again, but that has not worked. Also tried to install the audio drivers from the acer Web site... nothing. Also downloading windows 8.1 in case that is useful...
OT: Audio does not
This occurred after the most recent Windows update? (around 7/10)? If so, the KB2962407 update may have been the origin of the problem. I fixed it by uninstalling this particular update. Details can be found here:
http://www.eightforums.com/sound-audio/49684-no-sound-device-being-used-another-application-7.html
-
Integrated webcam has stopped working on my laptop Satellite
My laptop integrated webcam has stopped working, I tried to check the properties of the device and uninstall and reinstall the driver, but all I get in the device status is
This device cannot start. (Code 10)
The I/O device is configured incorrectly or the configuration of the driver settings are incorrect.
I can't find anywhere to change something as im don't know what to do.
Can you please tell us which model of laptop and what operating system are you using?
By the way: since when did you notice this problem of webcam? It started one day to the next?
-
Keyboard stopped working on my laptop Satellite
Hello
Some of the keys on my laptop suddenly stopped working today and slowly seem to have problems with more keys (they are does not at all or typing a letter or a symbol for the key, sometimes more than one letter).
I tried to turn off my computer for awhile, and now my sound doesn't work either.
Help, please.
* edit: * sound came back.
I just hope he stays.still some problems with the right keyboard and having to use the on-screen keyboard to type
Post edited by: Hatem
> still have problems with the keyboard well and having to use the on-screen keyboard to type
In your case I would recommend you to connect an external USB keyboard and test the laptop as part of this external keyboard.
In case the external keyboard would work perfectly, the problem is not related to the keyboard controller, but your internal keyboard and to solve this problem, the internal keyboard needs to be replaced. -
My games suddenly stopped working on my laptop with vista SP 2 after a single pass?
Ideas: I use a Gateway laptop with vista Home premium sp 2, AMD turion x 2 dual core x 64 bit, fitted an ATI HD 3200 graphics card. (The card is built-in.) He is more than capable of handling the Dead Space, Bioshock, big chase and combat arms and run each of them perfectly at maximum quality, except for dead space, which had to be alleviated a little to improve the speed and responsiveness.
- Programs: Borderlands, Dead Space, Bioshock, Grand Chase, Combat arms.
- No error message. Games freeze just to the preloader or splash screen. The processes are still ongoing, but there is no game window or the game got stuck on splash screen. (I have to 'end of process' to stop smoking completely.)
- Recent changes made to your computer: just closed, each of these games after their execution 1 time, and they would not work again. Problem occurred after a standard, so that could have linked somehow.
- What you have already tried to solve the problem: compatibility, analysis antivirus, cleaning Mode, running in as long as administrator, disabling firewall, protection against viruses, disabling the registry Disabling UAC, each administrator, update drivers for graphics card, system update, reinstall everything THAT I can think of who could fix this problem.
- NOTE: I ran these games on another computer and they work fine. A solution to this issue has completely escaped me.
Have you tried to reinstall or update your directX? or your visual c ++ Redistributable files? Sometimes, if this stuff is corrupted (and you won't know until you start a game generally because it stops working) and you need to reinstall such things.
-
SimplePass scanner stops working when the laptop sleeps
Hi, I have a Pavilion m61045dx notebook for Windows 7 64-bit. I managed to get any installation Simplepass chose Google Chrome as a browser, because it seems that Firefox does not support this version of Simplepass 5.4, and then the fingerprint reader has stopped working. I found a suggestion on this forum or another, can't remember now that said to go to the Device Manager and choose the validity and under power management sensor, uncheck the box "allow the computer to turn off this device to save power". Rebooted as directed and Voila! validity sensor works again. But now every time that the computer will sleep the validity sensor does not power back upward with the rest of the computer. Whenever this happens, I was able to make it back by going to Device Manager and the deactivation and reactivation of the validity sensor and then restart. But seriously, what a pain. Any suggestions? I'd be happy to find that it is just a matter of setting, but failing that maybe an update to the latest version for my machine. Unfortunately, the software Simplepass has no option ' check for updates ', or device driver updates either. Any suggestions?
Please disable power saving mode for USB in Device Manager.
· Click on Start Orb > typeDevice Manager in the search box
· Click Device Manager in the search results
· Expand USB root huhb > right click on your mouse > clickProperties
· Click the power management tab
· Uncheck allow the computer to turn off this device to save power
· Click OK
that you change the power supply for the USB options.
Here are the steps to do so.
http://www.SevenForums.com/tutorials/147369-USB-selective-suspend-turn-off.html
disable the mode of suspension from there...
Hope this helps, good luck!
-
Why my touchpad stopped working on my laptop Compaq Presario CQ60
Touchpad does not work. Laptop is nearly 2 years old.
Hello May6491,
Research on this post, it seems that your touchpad is not working.
Quite often, there will be a button you can push to turn it on or turn it off. It is usually in the function or the touchpad keys.
If this does not help, we will try a clean boot and see if the startup programs are causing the problem. Use the following link to get information about the boot minimum troubleshooting on Vista:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Let us know if that helps.
Best regards
Matthew_Ha
-
I'm not very keen with the terminology of my computer, but I'll try to explain my situation better than I can.
I think that the problem began with a recent trip where I went out of State and took my laptop, I had problems connecting to wifi it. I was originally a bridge between Ethernet and wifi connection I think (something I said should not be the problem) and I had to take off for my wifi to work and once I did that my wifi worked well there. Once I came home however, my computer connects to my wifi at home and say I have 'internet access' but does not load anything on Firefox or Internet Explorer. I have already tried to rebuild the bridge, restart my laptop and analyses of virus. I know that my Internet works so if someone could help understand me what needs to change in my settings, or whatever it is I would be very happy.
Hi Marcos140,
I'd like to help, but is very difficult to diagnose with so little information...
Do you know why you need the bridge in the first place?
Your laptop connects via a wired or wireless?
Please try this:
- Click Start
- Type cmd
- Press on enter
- Opens a black box
- type ' ipconfig/all '.
- Screenshot of the output
- Type "ping google.com".
- Screenshot
If you can post the output of these commands, that it will help you.
Thank you
Curtis -
HP laptop G72: dvd has stopped working on my laptop with windows 10 hp G72
When I insert a dvd the drive seems to be reading, however it does nothing beyond.
Thanks a lot for your comments, but I still have trouble getting this dvd to work as it should. Product number: XG988UA #ABA.
The dvd was working before and as near as I remember it didn't work since the installation of Windows 10. I went through the process, because you detailed to reinstall by the Manager for devices with few positive results. After inserting disc the display shows the "legal warning to copy years etc. but don't can't play. In fact there is no play button is displayed. Others are there as advance fast volume and so on, but that's all. Yes, several discs have been attempted with similar results. (This is not a Blue Ray system. "It's a basic dvd Setup.)
I don't have any idea on how to install "windows media center" and use it to activate my dvd player.
-
Touchpad and clicks have stopped working on my laptop
Original title: can I FIX?
Well, my friend, I think that has a press that has locked his left click on its mobile Gateway (primary)... also as of today the right click on & touchpad no longer responds to commands? Last night @ least right click on, then press the key worked a bit, but today NOTHING. I did research on my laptop and found tips and ways to try and solve this problem. Unfortunately... I need to use the left or right click and the touchpad? ... what a bum - sea... Laughing out loud! So I thought to restore Sysem (startup hoping to repair would help) HA! ... need to left click to activate... OMG! My question is... are there any key that can be used to do what the right, touch pad & clicks left to do? My friend's son Granny and she's really down because she said she hit some buttons @ top? Right now the computer waits for me to "click on restore" Startup Repair, but I can't... R & L clicks and touchpad don't answer cammands... Thnx in advance 4 help
Thnx a lot to the person who helped me with the question WinDefendr & SecEssentls (smile).
Hello
Startup Repair and system restore are two different things.
System Restore is used to put the settings of your machine to a previous point in time before that happen a certain problem. I hope it would work.
Startup Repair is used if your machine does not fully start in Windows.
Make sure that you are not looking to restore to factory settings. Who says back to nine and erases all data from the hard drive.
You can try to connect a USB mouse to use to try of difficulty and derivation for now the Touchpad problem.
See you soon.
PS You can also try hard restart it and see if it changes Mode without failure.
You can work there to do a system restore while in there.
"How to start mode without failure.
http://bertk.MVPs.org/html/safemodevista.html
How to do a system restore:
-
Shrfax stop working on my laptop, all the patches?
My Fax Wizard crashes whenever I try to use it. He worked a few weeks before, and now it says that SHRFAX is not found. I saw a number of things online that say improvements did something for her. I really used in my list of printers a bit. I would be grateful any kind of fix that someone could recommend.
Another confusion Windows error message (although it would be helpful if you provided the full message).
SHRFAX is not the name of a pilot. In fact, there is no file in Windows XP, named shrfax (with any extension). In addition, even if the driver is called 'Microsoft Shared Fax Driver', it cannot be shared in the usual sense of the term.
SHRFAX is the port assigned to Windows Fax name.
Windows XP fax is somewhat an enigma. Not much information is easily found on this subject. However, the Windows XP fax is notoriously difficult and fragile.
I don't know a specific fix for your issue, but whereas that uninstallation and reinstallation of Windows applications in general often fixes things, that's what I suggest you do that.
- Start > Control Panel > Add / Remove Programs > Add/Remove Windows Compents (icon in the left column)
- Uncheck the 'Fax Services', complete the Windows Components Wizard and restart.
- Repeat steps 1 and the box this time...
-
Quick Launch buttons stop working on my laptop dv6408
Hello
I've upgraded to windows 7 and things where works very well with the quick launch buttons
but now, no matter what I do to try and fix the problem does'nt last for a long time. I tried a solution
by unpluging the power plug then disconnect the battery and then hold the power
button for 30 sec. This should solve the problem on a base in the short term. Is there a download that
can solve this problem?
Thank you
Mike
@karp57
The link I posted above does not work for you? I just checked and it works for me.
-
bios systems stopped working on acer laptop aspire 5520 vista 32 bit
Signature of the signatureroblem problemProblem event name: BEXApplication name: setup.exe_99 Machine slotApplication version: 11.0.0.0Application timestamp: 4dc9b238Fault Module name: setup.exeFault Module Version: 11.0.0.0Timestamp of Module error: 4dc9b238Exception offset: 00003 56 dException code: c0000417Exception data: 00000000The system version: 6.0.6002.2.2.0.768.3Locale ID: 1033Additional information 1: a3cbMore information 2: 6a6a54406e1bc780ce668b71b4dec5b33 more information: d91aAdditional information 4: 65b4dfe5193853753bdfbec6330d9f12Problem event name: BEXApplication name: GoogleUpdate.exeApplication version: 1.2.183.21Application timestamp: 4b95e661Fault Module name: HookDLL32.dllFault Module Version: 10.0.0.68Timestamp of Module error: 4d79f127Exception offset: 000225abException code: c0000417Exception data: 00000000The system version: 6.0.6002.2.2.0.768.3Locale ID: 1033Additional information 1: e3f7More information 2: 0129349bd2d0f27886df9d2e3baad6b63 more information: 9c6bAdditional information 4: 41bbdee7b8df1fadcc5f758050d94d43Additional information about the problemescriptionHost Service diagnosis service hung on starting.Signature of the problemProblem event name: ServiceHangService name: WdiServiceHostImage name: wdi.dllImage Version: 6.0.6001.18000Type of service: 20Startup type: 2The system version: 6.0.6002.2.2.0.768.3Locale ID: 1033Additional information about the problemBucket ID: 159664685Bucket ID: 1903953544Signature of the problemProblem event name: BlueScreenThe system version: 6.0.6002.2.2.0.768.3Locale ID: 1033Files helping to describe the problem (some files may be is no longer available)Mini060611 - 01.dmpSysData. XMLVersion.txtSee a temporary copy of these filesWARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.Additional information about the problemBCCode: c4BCP1: 000000B 7BCP2: 00000001BCP3: 00000001BCP4: 00000001OS version: 6_0_6002Service Pack: 2_0Product: 768_1Information about the server: 2d7b079a-9201-4640-afdd-60ca8019f4d4Hi michellesoto,
· This is a recurring problem, or is it only once?
The event log that you pasted in the thread seems to indicate that the problem came from GoogleUpdate.exe.
I suggest you try the methods below and check if it helps.
Method 1: Try to uninstall the program.
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startupmode.
Maybe you are looking for
-
IPad frozen due to the old ID password
Hi - I have just updated my iphone and ipad IOS 10 and now he keeps asking the password to my old apple ID. I tried to change the former temporarily apple ID so that I can identify you and to go beyond that, however, when I try to change the Apple I
-
How to reset the default font color
I want to change my font color by default from black to dark green.
-
Issues to be resolved for the own Web site
Hello world I have a question where I can't connect to the external site of the company due to a problem with OS X server DNS. The site is "domain1.com" and OS X server hostname "server.domain1.com." I also have a main area in the DNS which is "domai
-
Tecra A2: Can't get modem to work
I have a Tecra A2 and I am trying to connect to the internet via the modem, but I get message errorr 633-"the modem is already in use or is not configured properly" I looked in the device under Ports Manager, there "Communication Port (COM3)"Under "M
-
Download firefox if I download bitdefender 2014
Just download bitdefender 2014 for 2 years from http://www.anti-virus4u.com/ I read that bitdefender support firefox I have internet explore how can I download firefox? what I do when I update my bitdefender BitDefender 2015 can I still use my old fi