Get electric shocks when the new load slate 7

Hi all

My gf just got me a slate of new 7 for Christmas and when I load it with oem charger and cable I get electric shocks of metal run the Tablet when you plug in the charger.

I tried to connect a support ticket but my warranty is valid and my support has expired so I was not allowed to post hp.

First hp unit, extremely not impressed by taking in charge and produced so far, how can I contact someone?

Thank you

L

If the slate is new it has a one year warranty. Go to the web for the 7 slate support portal and click the Contact HP link. Choose one of the means of contact on the web page.

Tags: HP Tablets

Similar Questions

  • Electric shock between the helmet when it is used in Satellite C855

    I need one help if just to acquire a Satellite C855 - 1GN laptop and have not used my prior helmet.

    When I plugged in the socket, I had a small electric shock to the left, ear no matter what I put in it and can hear a buzzing through it. I got these awhile and not had any problems with them in my old laptop or Ipod before.

    They are Dr Dre in-ear if that helps at all, have no idea why this is happening and how to fix it.

    Thank you

    > When I plugged in the socket, I had a small electric shock to the left, ear no matter what I put in it and can hear a buzzing through it. I got these awhile and not had any problems with them in my old laptop or Ipod before.

    It seems that the hardware problem and I would recommend to get in touch with Toshiba authorized service partners in your country.
    Something like that is certainly not usual behavior for laptop and checked by a technician

  • Server data store will automatically get updated when the new file (with the same name) is placed in the landing area


    Hi guys,.

    The data store server-side will get automatically updated when a new file with the same name is loaded in the landing area?

    for example

    1 data store created for server-side get the file named UK.xls (he has 5 rows)

    2 snapshot created for the above data store

    3. created with the snapshot process

    After that if I remove 2 lines from the same file and load again to the landing (with the same name). So by re-running the process will take the last file OR do I need to reload the file in the data store every time when there is a change in the file. We also tried with option to work but the last file was not picking up.

    Any help will be really appreciated.

    Please lets us know your updates.

    Please advice

    Thank you

    VT

    Hello

    When you create a snapshot, you create a snapshot whose task (provided that you use a data store server-side) can be run from a job. To refresh the data, run the snapshot in a job task. If you create a task at the time the snapshot and the processes that use it, they will automatically connect and will be 'upstream' data through the snapshot in the process. You can then choose whether it would be appropriate to write the snapshot or not (for the effectiveness of performance if you want to do the straight through processing) by activating or deactivating the bucket of data staged that the snapshot written to. The snapshot in the work task means that the data is refreshed.

    For the work of design to the Director, you can refresh the snapshot by running again it manually in the context menu.

    Kind regards

    Mike

  • When the new cartridges I get testpage first when I give a print command

    When the new cartridges I get testpage first when I give a print command

    Hello

    This sounds as if it were a feature of the printer driver.

    The best thing to do in this case is to contact the manufacturer of the printer.

    Let us know what they have to say.

    Best regards

    Matthew_Ha

  • Get the values of default table row when the page loads

    Hello

    I am running JDev 11.1.1.7. We have a page that contains two tables in a relationship of the master / detail of nickname. We can do a real master ADF / detail with view items related because the query for the 2nd table is complex and works best when queries with binding settings. The View object for the 2nd table has a request with 2 link params as it can get in the first table. Thus, when a line is selected in the first table we want to execute ExecuteWithParams on the object from view of the table 2. We do it in the Bean managed for the page in a method that is the selection to the first table listener. It works fine except when the page initially loads, the first line is selected by default. When the default value is selected the selection listener is not triggered.

    I've seen the suggestion of not having a line selected by default when the page loads by removing the value selectedRowKeys on the table. However, we do not want that the 1st row of the table secondary master to be selected by default and we as the table of detail to show the correct corresponding lines.

    Steve

    Steve,

    Not really sure when you say that the 2nd table is complex and may not use the master detail. If the settings link in the parent table, you can set the ViewLink accordingly and it should work, right?

    In any case, if you're after the execution of methods on the loading of the page, you will find the links below.

    If it's a working group, you can add a methodCall as activity by default and UTF, you can use phase listener (if listener server does not).

    https://blogs.Oracle.com/aramamoo/entry/an_epic_question_how_to

    Advice from the Oracle Johny: ADF: how to run the ViewObject with a ViewCriteria on the PageLoad in Application Web ADF

    It will be useful.

    See you soon

    AJ

  • How to develop all the rows of the table of the tree when the page loads?

    Hi all

    I have tree than VO mere reference of table... I want to expand all table tree rows when the page loads... I already have initially developed property to true... but it only runs from first line of tree...

    Any help would be great-Jey

    In the backbean and that:

      private RowKeySetTreeImpl ps = new RowKeySetTreeImpl(true);
    
      public void setPs(RowKeySetTreeImpl ps)
      {
        this.ps = ps;
      }
    
      public RowKeySetTreeImpl getPs()
      {
        return ps;
      }
    

    In the jspx set table tree as disclosedRowKeys

    
    
  • record in the query when the page load

    Hi How can I make my block to query the record when the page load I don't have what it takes to press F11 + Ctrl I just what to load the data when the page loads for this field or block

    I did it

    create a LTRC of control block of data with the SERVERNAME element non-base

    Give it a value in the a time-new-form-Forum

    CGFK$ QRY_SERVER_TABLE(:CTRL.) SERVERNAME); and it works

  • How can I configure drive extender? get an error when the computer shuts down say reinstall Extender player

    get an error when the computer shuts down say reinstall Extender player. ? What is it. Thank you

    Hi deener49,

    Please look at the thread below for a possible solution:

    http://answers.Microsoft.com/en-us/IE/Forum/ie7_6-windows_other/please-reinstall-Extender-Player-invalid-or/86692b09-9464-E011-8dfc-68b599b31bf5

  • BlackBerry Smartphones does anyone know when the new Tour with the touchpad will never come out to VZW?

    Anyone know when the new Tour with the touchpad will never come out to VZW?

    Yes...

    9630 tour =

    9650 = "BOLD"

  • Is it possible that when the new record is inserted in a table then this empty inserted record is automatically displayed without scrolling?

    Mr President.

    Is it possible that when the new record is inserted in a table then this empty inserted record is automatically displayed without scrolling?

    Because I change the size property of the table 5 range and my new record is inserted at no 10.

    When I click the addRecord button the new parallel line does not appear, do scroll down to see it.

    I want that we don't have to scroll down.

    The line is displayed automatically.

    as shown in the photo my behavior of page.

    scrolling.png

    Concerning

    If you just need the newly created line to be visible,

    You can simply set contentDelivery = 'immediate' and displayRow = "selected".

    P.S. the blog mentioned above only.

    See you soon

    AJ

  • Validation of required field only when the page loads (HR test case!) included

    Hi experts,


    Here you have a simple test for Jdev 12.1.3 HR case: https://dl.dropboxusercontent.com/u/18609389/TestHR.zip

    The main.jspx is just a button which CreateInsert a record dept displayed in another page:

    Screen Shot 10-16-14 at 07.04 PM.PNG

    My problem is the following page (test.jspx) has this code to run when the page loads:

    <af:serverListener type="onloadEvent" method="#{backingBeanScope.backinBean.onPageLoad}"/>
                <af:clientListener method="onLoadClient" type="load"/>
                <af:resource type="javascript">
                  function onLoadClient(event) {
                      AdfCustomEvent.queue(event.getSource(), "onloadEvent", 
                      {
                      },
    false);
                      return true;
                  }
                </af:resource>
    

    The code is simply this (now):

        public void onPageLoad(ClientEvent clientEvent) {
            logger.severe("HR TEST.....");
        }
    

    And that's the problem, required validation is performed.

    Screen Shot 10-16-14 at 07.06 PM.PNG

    Can you tell me why?

    Thank you

    Jose.

    Don't know what is my mistake, but the code is of the actionListener button is not called. :-(

    Well, you combined two different ways to do this (from my first answer).

    If you are still reading this, you will notice "or" before the second suggestion

    Thus,.

    1. keep your clientListener under af:document tag

    2. based on javascript, you find key (use: alert ("button");)  to see if you have referenced correctly your button in findComponentById())

    And then:

    approach 1:

    Use AdfActionEvent.queue (button, true);  queue event on your action button and implement your logic in function attached to the properties of your 'actionListener' or 'action' button (if you don't need listener server in this case)

    approach 2:

    Use AdfCustomEvent.queue (button, "onloadEvent", {}, false);  the queue onloadEvent on your button (in this case you need listener server attached to your button)

    Dario

  • If I create a Web site now I will need to redraw it when the new version of delicate design comes out?

    If I create a Web site now I will need to redraw it when the new version of delicate design comes out?

    A sensitive site may be derived from the version of your office, but of course, you will need to put in some work to determine behaviors for other devices. There is no "one fits all", without worrying whether sensitive or selective.

    Mylenium

  • Have disabled Lightroom on one computer, I always get a message on the new computer, saying that the serial number is still in use on the old computer. I'm on a Mac and you want to use LR6 on a new iMac.  Any suggestions?

    Question: I have disabled Lightroom on a single computer, but always get a message on the new computer, saying that the serial number is still in use on the old computer. I'm on a Mac and you want to use LR6 on a new iMac.  Any suggestions?

    Thank you very much. Problem now solved and happiness is back.

  • How to get an alert when the collector stops working?

    Hello. My clients are sometimes problems with the collection of data by vCops of vCenter Server. When they enter the GUI, all objects are grey, and there is no historical data for a certain period of time.

    After you restart the VAPP vCops the collection usually starts again.

    My question is if it is a good way to get an alert when the collection stops. This would certainly raise the quality of this product.

    in fact, these alerts exist - they are of type "administrative alerts".

    Are you sure that you do not get them?

  • JavaScript in "Run when the page loads", works not when paginating the results grid

    I have some Javascript in a page of the Apex, running in "run when the page loads. There is stuff to a grid of results. It works fine on the loading of the page, but then does not work when I paginate (Browse), or sort the grid. I assume that this is because the grid is sorted / paged using Ajax, which means that the page is not fully loaded.

    Is there anywhere else I can put the code, so it is applied to the grid on the kinds and paging?

    Yes you are right when you paginate it doesn't reload the page (at least in this case).

    You must use the event after Refresh in the dynamic actions and run javascript also, you would probably need the dynamic scope

    17.9 implementation of dynamic Actions

Maybe you are looking for