Get error messages whenever I have try to defragment, & I also lost storage space. (less than 1%).

Original title: memory problem & Defrag.

I have a problem of the 2 part that has been building.  I get error messages whenever I have try to defragment, & then the Defragmenter stops.  I was just let go of the problem.  But then I noticed that I lost the memory space.  I deleted almost all of the programs that I can, but I still only 277MB of available memory (less than 1%).  I don't know what is using all my hard drive space.  There are only a few programs installed.  I'm also 99% fragmented.  Defrag won't work without releasing the memory of 15%, but even if I HAD the memory, all I ever get is an error message when I try to defragment.  Now, my computer is so slow, it takes about 3 minutes to open a web page.  As it should be obvious, I'm not all that tech savy.  What can I do?

Right-click your drive (C :) and select Properties, click on disk cleanup, select the file that you want to remove and read the details below.) Put a check mark in the box of files that you want to remove and click OK.

Now again click on disk cleanup and click on more Options tab ignore Windows components and programs installed.

Under the system restore click clean up, and then click Yes if you do not experience other problems besides those that you mention in your message.

Now, try to run Defrag and if you are unable to read the article below.

http://support.Microsoft.com/kb/922379

Tags: Windows

Similar Questions

  • I get error messages because I have no space on my OS partition

    Original title: winsxs 13 GB folder

    I get error messages because I have no space on my OS partition, which is 30 GB. approximately 5 GB are used by programs and private documents. the rest is composed of windows vista Home premium - 13 GB of only winsxs. I have disk cleanup, but the problem persists. What can I do?

    an impressive picture of spacemoger can be found here http://s2.imgimg.de/uploads/harddisk5a06c278jpg.jpg

    thx for ideas.

    Hello

    Run compclean.exe to remove the old backup files. But remember that this does not uninstall Vista Sp2.

    André

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • Since the update to 38.0.5, I get script does not error messages whenever I have play a video on youtube.

    8.1 - the windows up to date. Updated video driver. Connect Flash to date.

    I tried to disable the protected mode, no effect.
    Everything works great until I updated to FF.
    Very annoying bug. Help please?

    Are you sure protected mode is disabled? Firefox has a setting hidden for this moment, where you manually edit a file mms.cfg:

    (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

    (B) in the search above the list box, type or paste the flash and make a pause so that the list is filtered

    (C) double-click the preference dom.ipc.plugins.flash.disable - protected mode to change its value from false to true.

    It cannot take effect until all the Flash was discharged for a few minutes, or you close Firefox.

    Firefox can read WEBM and OGG video natively in the HTML5 player without outside help, but it uses Windows Media Foundation to play the MP4 video. There are some settings in Firefox to disable it; users who download MP3s sometimes easily changed these settings. Here's how you can check your:

    (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

    (2) in the search above the list box, type or paste the media and make a pause so that the list is filtered

    (3) {for Windows newer than XP} if the preference media.windows - media - foundation.enabled is in bold and user set to 'false', double-click to go to true

    (4) {for Windows XP} If media.directshow.enabled preference is in bold and user set to 'false', double-click to go to true

    If you have changed these settings, does make a difference in this YouTube Player used you? I'm not sure if the change takes effect immediately or after leaving Firefox and start it again.

    Users in Europe may need the Windows Media Feature Pack for Windows 8.1, but if your Windows is shipped with Windows Media Player, and then which probably does not apply to you. See:

  • Why I get this Message whenever I have connect told Me to change my password?

    This question was already asked on 9 July by BarbieG but the answer given by JohnD-Support Engineer is nothing to do with the question. I'm having the same problem.
    It's a message from Vista saying that my password will expire in x number of days and I have to change. I have no interest in changing my password periodically. How can I tell Vista to my preference? I have 3 other computers with Vista and they have asked me to change the password. I'd appreciate any help with this.

    Hello and welcome on the Microsoft Answers Forums:

    I think it has todo with your local policy settings or local users and
    Groups settings.

    To check the password through the local policy settings.

    1. click on Start and in the instance type search in "Run".
    2. press on enter in the dialog box run will be appear and type
    in "gpedit.msc" and press enter.
    3. UAC ask credetials or ask you to give permission.
    Perform this fix and pass the UAC elevation prompt.
    4. open the Settings Windows in the tree and then open
    the security settings and choose the account policies and choose
          Password policy. 
    5. on the right side, you will get a list of password settings.
    6. check here in the "Maximum password age".

    To view your account from local users and
    Groups.

    1. click on Start and in the search for the instance of type 'Run'.
    2. press on enter in the dialog box run will be appear and type
    in "lusrmgr.msc" and press enter.
    3 UAC will ask credentials or to ask you to give permission.
    Perform this fix and pass the UAC elevation prompt.
    4. click on the users in the Panel side tree and on the
    on the right a list of accounts on this PC.
    5. now find your account and right-click on it, choose
          properies.
    6. a properties dialogue box appears specific to this account now
    Check if the box "password never expires" is checked.
    7. If it is unchecked then check, and then restart your PC.

    If you need additional assistance,
    Please do not hesitate to contact me and let me know.

    I hope this information was helpful...

    Good day...

    Best regards
    Good

  • Windows Media Player 7 still get error message c00d11d2 when I try to rip CD access denied. plays OK

    I attenpted to fix the .dll file extension & having problems with access permissions

    Not visible Hi,

    Thanks for posting in the Microsoft Communities. Provide the following information:

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Run the Windows media player settings Troubleshooter.

    Method 2: Follow the steps in the article.

    Windows Media Player C00D11D2 error

    Let us know if you need more assistance.

    Thank you.

  • Error message every time I try to update Java

    Original title: Java get error message every time I try to dl
    error message 1606 every time that I try to put up-to-date Java

    http://Java.com/en/download/FAQ/remove_olderversions.XML

    "Can I remove older versions and I need multiple versions of Java installed on my system?

    http://Java.com/en/download/Inc/windows_new_ie.jsp

    'Download Java for Windows'

    I hope that the information above to fix the problem.

    See you soon.

    Mick Murphy - Microsoft partner

  • I get this error message whenever I try to run the disc defragmentatio

    I get this error message whenever I try to run disk defrag c:\documentsandsettings\user\localsettings\applicationdata\microsoft\internetexplorer\recovery\active\recoverystore

    I really need to run defrag, but one can not because of that, I have looked everywhere but can't find and answer, please help it would be much appreciated

    I guess that a malware is the cause of the problem.

    Download this http://www.malwarebytes.org/

    Update and Scan. If this does not it, use this

    http://www.myantispyware.com/2009/10/28/how-to-remove-desktop-Defender-2010-uninstall-instructions/

  • Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think.

    Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.

    CBTEKRONY wrote:

    Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.

    What is this error message that you receive? This would help a lot. From there, a person must be able to provide some additional troubleshooting steps.

  • I get an error message whenever I try to run Disk Defragmenter

    original title: I get an error message whenever I try to run the Defragmenter of disck

    It says disck Defragmenter is already programmed to run on volume C please run Chdsk/F I checcked my schedule the task and it does not appear as being planned how to fix this?

    Disk Defragmenter may not work on a drive when it detects errors on the disk.  If you need check your drive for errors.  This is usually by running "chkdsk" even if a disk check can be scheduled graphically as well.  Because the disk check must be performed when nothing else is using the drive, reboot and chkdsk runs before Windows loads on this disc.  For more information:

    "How to perform disk error in Windows XP check"
      <>http://support.Microsoft.com/kb/315265 >

    HTH,
    JW

  • Whenever I try to install or to uninstall I get the message, you must have administrator rights

    original title: Vista administrator rights

    Whenever I try to install or to uninstall I get the message, you must have administrator rights. I signed all the senses and no luck, I want to get rid of this problem. Hope someone can help

    Whenever I try to install or to uninstall I get the message, you must have administrator rights. I signed all the senses and no luck, I want to get rid of this problem. Hope someone can help

    This isn't a problem.
    It's a design to prevent unauthorized users to perform certain tasks.
    Installation and uninstallation are some of these tasks that require administrator rights.

    If you are not an administrator, or you do not have an administrator password, you can not install or uninstall.
    Not another way around it.

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

    I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

    Right-click on the setup.exe > run as admin.

    See you soon. Mick Murphy - Microsoft partner

  • I get the error message: 1 when you try to download the creative application of cloud. I tried rerun the installation and use of the cleaning tool. I can not uninstall and reinstall the app because there never have down loaded initially.

    I get the error message: 1 when you try to download the creative application of cloud. I tried rerun the installation and use of the cleaning tool. I can not uninstall and reinstall the app because there never have down loaded initially.

    Try with the solution provided in the link below:

    ERRO 1: Creative cloud cannot install

  • try to download the software: via the link provided in the email, I get an error page «» Then I tried via my account by clicking on the link 'Download' screen 'my order. " Then, I get a message saying "you have no download. I'm almost ready to fi

    Hi, I just bought first elements. I paid online via Paypal. I got the Adobe confirmation email a few hours later. I then try to download the software: via the link provided in the email, I get an error page «» Then I tried via my account by clicking on the link 'Download' screen 'my order. " Then, I get a message saying "you have no download. I'm almost ready to file a complaint with Paypal for fraudulent online sales. What should I do?

    Hi H D,

    Tell us the name of the product you have purchased.

    Please visit: http://www.adobe.com/downloads/other-downloads.html

    Let me know if it helps.

    Concerning

    Megha Rawat

  • I'm getting 1602 error message whenever I try to download the update to Adobe Reader on Windows 8

    < br >
    < span style = "" are-size: 10pt; ' > I'm getting 1602 error message whenever I try to download the update to Adobe Reader on Windows 8, what do I do? " </span >
    < span style = "" are-size: 10pt; "> < / span >"

    [removed email address]

    Hi sleep waterproof

    Please see the below KB Doc: http://helpx.adobe.com/acrobat/kb/error-1602-update-acrobat-reader.html

    Or download the update manually from the link below and install their...

    http://www.Adobe.com/support/downloads/product.jsp?platform=Windows&product=10

  • I get this error message every time I try to open Outlook Express: your server unexpectedly terminated the connection.

    I get this error message whenever I try to open Outlook Express:
    Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.mail.yahoo.com', server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 465, secure (SSL): Yes, error number: 0x800CCC0F

    How can I solve this?

    original title: Outlook Express error

    Does OE open at all, or you get this error after opening?

    Check your mail at Yahoo.com and see which messages are still on the server that you have not received. The first online can be very large and cannot be downloaded. If you find such a message, read it and delete it online.

    In addition, you must disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3

    Why you don't need your anti-virus to scan your email
    http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

    Note that for many AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck e-mail scanning when the option is available.  You will probably have to do it.

Maybe you are looking for

  • Logic Pro 9 unexpected leave after updating Mac OS Sierra

    Here's a new update of Mac OS installed and new problems with Logic Pro (9). While working, I can't open any save / open / export popup - no matter what, this finder calls - logical popup just closes in a second. Never have met this funny on thank yo

  • Battery compartment

    I see that there is a deal with a secondary battery for iPhone 6. No idea if he's going for 6 + and 6 s +?

  • IOS 9.3 - Email on phone freeze and links not opening not - please send us an IOS updated to fix it soon!

    Dear Apple IOS team, It is a horrible bug in 'Most used' application on the iPhone - "Email".  Its there on all of the devices that I use with 9.3 - one iPhone IOS 6 and and iPhone 5 s. IOS 9.3 - Email on phone freeze and links not opening not - plea

  • Reinstalled Windows XP now WLAN is not recognized - Satellite Pro L20

    I reinstalled Windows XP on my Satellite Pro L20. In Device Manager, I have a number of yellow question marks, which means that the operating system has not installed the drivers and therefore does not recognize the device. I downloaded the v5.3.0.35

  • Loss of links FI L1/L2

    Hello One of my customers wonder about linking the FI 2 L1/L2 loss. In my mind, this case should not be here, why we have 2 links but I don't know what happened exactly in this case... the 2 FI become master of the UCS cluster... any idea or already