Get error when MPEG copy files on a DVD

Similar Questions

• Getting error when installing anti virus kaspersky

  Hi there, I get "error: Windows cannot access file, path or specified device.» You don't have the appropriate permissions to access the topic"when you try to run kaspersky 2015

  Hi Gousepasha,

  Thank you for the update on the question and sorry for a delayed response.

  If the problem persists, try to perform the clean boot and temporarily disable security software , then check install Kaspersky.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  Disable the antivirus 

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  This forum is for Microsoft Security Essentials.

  You question is with Oracle Java.

  It is recommended to go to www.oracle.com to get help.

• Windows Update lists an important update, but I get error when downloading it. "Fix" suggested did not work.

  Windows Update lists an important update, but I get error when downloading it.  I ran update readiness tool and two logs in Windows\logs appear no error at all and nothing fixed.  The update that will not download is KB974332, which can solve some problems I encounter.  What else can be done, or should I ignore this update?
  Just upgraded to Win7 64-bit, Vista 64 - bit Edition Ultimate Home premium.

  Hello

  Welcome to the Microsoft Vista answers Forum!

  We would like to ask you some questions to help us focus on the right place.

  (a) what is the error that you receive on the computer?

  (b) since when you are facing this problem?

  You can try the steps below and check if the problem is resolved.

  Note: this problem may occur if some of the windows update components are corrupt, so we will try to reset the windows update components and look for the number.

  You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058

  Also, visit the following link for more reference on the particular update.

  http://support.Microsoft.com/kb/974332

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Get error saying: a necessary file to your aol desktop software work properly (snmaster.idx) unable to find to fix this problem.

  Original title: installing the aol software

  I uninstalled some older versions of AOL, now I can not open aol. Get error saying: a necessary file to your aol desktop software work properly (snmaster.idx) unable to find to fix this problem. Please reinstall the desktop aol PFC snmaster.idx problem is I don't know how to install this software!  Help

  Hi Bruce,.

  Thanks for posting your question in the Microsoft Community Forum.

  Based on the information, you receive the error message error message to reinstall the AOL software to fix file snmaster.idx missing after uninstalling older versions of AOL.

  This problem may occur if some data for AOL Desktop Software files are not installed in the correct location.

  You can see the AOL support article to install the AOL desktop software.

  Install AOL Desktop software

  You can also consult the support AOL article and check if it helps.

  Message: SNMaster.idx is missing

  If the problem persists, you can get in touch with the support of AOL for further assistance.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Add a printer on a vista laptop on. Canon pixma ip3600 Office xp wireless worked until the laptop stops. now get error when you try to connect to it.

  computer Vista laptop does not connect to destop printer

  Add a printer on a computer laptop port local \\computer\printer) on the computer vista laptop. (for xp wireless canon pixma ip3600 Office worked until computer laptop shutdown. now get error when trying to connect.) How to install printer permanent on laptop?

  Hello

  1. What is the exact error message you get?

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  It will be useful.

• Error when parsing the file ' value of the 'src' attribute is not valid; must be a URI'.  ERROR (RSC-005) to "Hetgeheimfietsen.epub/OEBPS/toc.xhtml" (line 10, col 10): error while parsing the file ' "ol" element not allowed here; wait for the end-tag of t

  The members of the Forum kan help you

  Validation by using version 3.0.1 EPUB rules.

  ()https://github.com/IDPF/epubcheck( )

  December 9, 2015 15:27:33 THIS

  ---------------------------------------------------

  WARNING (OPF-007) to 'Hetgeheimfietsen.epub/OEBPS/content.opf' (line 2, column 227):

  Re-declaration of prefix reserved "rendition."

  ERROR (RSC-005) to "Hetgeheimfietsen.epub/OEBPS/toc.xhtml" (line 10, col 10):

  Error when parsing the file ' "ol" element not allowed here; waiting for the end-tag of the element or element "li" '.

  WARNING (CSS-007) to "Hetgeheimfietsen.epub/OEBPS/css/idGeneratedStyles_0.css" (line 60, col 2):

  Police made OEBPS/font/CambriaMath.ttc refers to fonts not standard type application/x-police-FTT.

  WARNING (PKG-012) to "Hetgeheimfietsen.epub/OEBPS/De_Alpe_d'Huez-1.xhtml":

  File name contains following non ascii characters: '. You want to change the name of the file.

  WARNING (PKG-012) to "Hetgeheimfietsen.epub/OEBPS/De_Alpe_d'Huez-2.xhtml":

  File name contains following non ascii characters: '. You want to change the name of the file.

  Check the finish with warnings or errors!

  In the file Toc delete the second "ol", as well as closing like Epubcheck duplicate codes

  the one after the other (delete the other)

• Error in name of user/password incorrect when you copy files or from folders

  Our company uses a Mac Mini (with OS X Yosemite) and application server to share our internal files. We've had this set-up for year now with everything works well. As of late, however, we are more able to copy files or folders which are in all shared folders. Basically, when we try to copy any file or folder that is located in one of our share points, we get the error "Unable to connect to the server because the name or password is incorrect". This error occurs for each user account, including my own, that has been specified as an administrator account. We are able to add files and folders (e.g.: copy from our local computers to folders) as well as rename the files and folders that are located in shared folders. We can also create files without any errors, so I'm fairly certain it's not a permissions issue. In addition, I tried deleting completely all files and recreate their but not always the same error. I also tried to create new user accounts (accounts directory Local as the Local network directory) and the problem persists when you are connected to the server using these new accounts. I just don't know what else to do as this seems to be a software problem. Any ideas?

  Thank you

  OK, a little update. We have a mac (iMac) client computer that still works under OS X Yosemite. The user on this computer is able to copy files and folders without receiving this error. This same user has also a Macbook that runs El Capitan. Using the same network login for access to the server of their Macbook results in the same error message. All users who receive this error also run El Capitan on their Macs. With this latest development, I'm pretty much able to conclude that this error is the result of El Captain customers access to a shared folder on a server of Yosemite. What is curious is that I did not always have this error since the upgrade to El Capitan. I am sure that this problem came only in the last month or so leading me to conclude that either update to El Capitan (on the computers of our customers) or an update to Yosemite or the Server app) on the computer server has created this error. The issue is upgrading of the computer server to El Capitan solve this problem or am I in for a whole new can or worms?

• Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

  I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

  What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

  Hello

  What installation media you are using?

  Method 1:

  Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

  This usually means a bad DVD, or an error reading on the DVD player.

  I suggest you follow the link and check.

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  Method 3:

  I also suggest you to follow the link and check.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Error: Unable to copy file 34 GB VHD in Vista Business 64-bit since hard drive USB 1 TB NTFS format drive.

  I have a big file VHD, > 34 GB. Created a Virtual PC (Virtual PC 2007) image, with disc of cancellations. Installed Win 7 Pro all updates. Office 2010 Pro all updates. Judgment, apply all changes.

  When the copy of the file on a hard disk to another disk Vista hard real partiton, it copies. But whenever I try to copy it to NTFSdrive USB, copy time continues to increase (cancelled when the transfer rate increased to 3 MB/s, time to copy remaining 11 hours 38% copied), the I/O reduction.

  Tried to launch the tool Rich Copy, which reported as 8 I/o operations failed and had to stop copying.

  Check the disk (from the virtual image) gives 314 cases of large files, 4 EA records, 88 business cases, NO problem.

  I tried to disable cancellation drive, start the computer virtual, reboot & running disk error checking, aok.   OS / works fine.

  I can copy other files (virtual hard disk, etc.) in both directions from the USB key. Have executed Optiomizer, disabled Compression and indexing on the USB. The USB is displayed 100% functional and no problem.

  It seems to be a problem with the Vista i/o system and the context of the VHD file. Someone else encountered similar problem on Vista, have a solution?

  Thank you

  GC

  In this case, I don't know.

  The only thing I can suggest is Process Monitor when it starts to slow down.

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645

• While trying to update the drive, I get error 2753.  The file 'acrosup64.dll' is not marked for installation.

  I get an error trying to update the drive that is suggested by creative cloud.  Error 2753.  The file 'acrosup64.dll' is not marked for installation.    I tried to uninstall and re - install drive, but when it's time to update again, I get the same error.  Is there a solution or get around it?

  Hi freddiebegood,

  Please see this KB for the solution https://helpx.adobe.com/acrobat/kb/error-internal-error-2753-install.html.

  Kind regards

  Nicos

• Resolved - getting error when connecting to the remote database to the host

  Hello

  I try to connect to the remote form of database host and get error. Can someone please help.

  I've seen a few threads about similar issues, but I am not able to solve this problem.

  I use Oracle Apps 12.2.0, Linux 5.1, Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit, using SQL Developer to connect.

  I am able to connect using SQL Developer in distance and using the same credentials in SQL Developer host, but in error

  Status: Failure-Test failed: IO Error: Connection reset

  The host

  I am able to ping remote, but cannot tnsping

  The tnsping error-

  Use settings files:

  C:\app\oracle\product\12.1.0\dbhome_2\NETWORK\ADMIN\sqlnet.ora

  EZCONNECT adapter used to resolve the alias

  Try to contact (DESCRIPTION = (CONNECT_DATA = (SERVICE_NAME =)) (ADDRESS = (PROTO

  (COL = TCP)(HOST=192.168.1.102) (PORT = 1521)))

  AMT-12547: TNS: lost contact

  Here are more details

  I have added the following in the TNSNAMES file. ORA file

  SCREW =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.102)(Port= 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = SCREW)

  )

  )

  I have added the following in the listener

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.102)(PORT = 1521))

  )

  )

  Finally - the firewall is disabled in Linux Machine

  Can you ping the server IP (or nomhote.nomdomaine) address of the client machine?

  What is the error you get when you issue "tnsping SCREWS" of the client machine?

  You have added the following entry to your client's tnsnames.ora file?

  +++++++++++++++++++++

  SCREW =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.102)(Port= 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = SCREW)

  )

  )

  +++++++++++++++++++++

  Can you reproduce the problem with sqlplus? If so, please see (11.5.10 news: run SQL * Net access for guests (Doc ID 291897.1)).

  If the problem with SQL Developer only, please see (SQLDeveloper receives ' java.sql.SQLRecoverableException: IO Error: Connection reset "and ORA - 609 database alert (Doc ID 1483287.1)).

  Thank you

  Hussein

• error when importing dump file

  Hi am error when you import the dump file

  C:\>impdp sms01/sms01
  
  Import: Release 11.2.0.1.0 - Production on Mon Jun 3 13:17:28 2013
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  ORA-39006: internal error
  ORA-39068: invalid master table data in row with PROCESS_ORDER=-4
  ORA-01950: no privileges on tablespace 'USERS'
  
  ORA-39097: Data Pump job encountered unexpected error -1950

  DUMPFILE also happens to be an option for impdp. Probably not the best name for a directory object. That said, get rid of the semicolon at the end; Impdp is a command of the OS, not a SQL * Plus command.

• Error when opening dmg file down loaded

  I tried 4 times at different times of the day today and the .dmg file that I double click to load comes with an error box that follows couldnot open drive - not recognized DesignStandard CS6 (reason) images.

  Size of the files I have an ending with. dmg.part (3,79 GB) and an another .dmg (3.78 GB the two file I get the same error as above)

  Machines:

  Power Mac 10.6.8 16 GB 2 x 2.66 GHz (core 12)

  Power Book 10.6.8 16 GB 2.2 processor intel core

  Its the purshased full version I get no error when download I get the icon on the file loaded down as I do on all dmg on the web files (I could pay for the version of messages/box)

  I just tried again this morning and the sound worked!

• Error when importing complete file with many newspapers

  Hello

  I came across an error when you try to import an entire folder containing 118 newspapers (total size 63 MB), created by and imported to Signal Express 2012 (version 6.0.0).

  After about 80 of them have been imported without any problem, error, indicated in the attached file, see.

  The journal other files can be opened one by one after will have been delivered to market there is apparently no problem with files.

  My path to the folder that contains the log files are 81 characters long. I also tried a shortest path with only 9 characters, but it did not help.

  Looks like it's a bug in SE. Is there a solution?

  Concerning

  Jocke

  It turned out to be a bug in SigX2012. SigX opened the TDMS file handle but could not close during the import. So when a loading 118 connects at some point, SigX reached the memory limit.

  As for SigX2012, we have a solution for you. Newspapers, by half and each folder contains 59 newspapers. Launch SigX and import logs folder, and then save the recording project and exit SigX. SigX to restart and load the project you just save and import the other journal folder. Let me know if it works on your side.

  Once again, thank you for reporting the bug to us.