'get info' show only 2 GB available; Finder displays 100 GB available. Where is my space?

'get info' show only 2 GB available; Finder displays 100 GB available. Where is my space?

http://pondini.org/OSX/LionStorage.html

You can have a lot of "other".

What is 'other' storage and what size should it be?

You can try an app like Disksweeper

https://www.OmniGroup.com/more

or

http://grandperspectiv.sourceforge.NET/

Tags: Notebooks

Similar Questions

  • Get-advancedsetting showing only a limited set of results

    Hi all

    I'm very new to using PowerCLI, so please be patient with me.

    I am trying to determine which of our virtual machines have the Advanced setting "device.hotplug" 'true '.

    I think I got the script to do so, the only question is, is not producing the expected results.

    When you run a command that does not filter results, it only returns results for 40 VM, when I expect to slightly more than 200.

    This is the command that I expect the return value for each virtual machine in a cluster:

    Get-Cluster-name of the "cluster" | Get - vm | Get-AdvancedSetting - name devices.hotplug | Format-Table-entity property, Name, Value - AutoSize

    I get a complete list of virtual machines, when I run:

    Get-Cluster-name of the "cluster" | Get - vm

    That should be all that you need to see my problem, however, for good measure and any comment, here is the little script I'm working on the only exit from the virtual computer with the "device-hotplug" setting enabled. Feedback or comments welcome.

    $hosts = get-cluster-name of the "cluster" | Get - vm |

    Where-Object {$_ .name-notlike 'exclude'}

    }

    $results = {foreach ($vihost in $hosts)

    Get-vm-name $vihost | Get-advancedsetting - name devices.hotplug |

    Where-Object {$_.} Value - notlike 'false'}

    }

    $results | format-table-entity property, Name, Value - AutoSize

    See you soon

    Lloyd

    Make sure that each VM has who progress together setting?

    Try like this, it should return all the virtual machines, also those who does not have the setting

    Get-Cluster-name "group" | Get - VM |

    Select Name,@{N='device.hotplug'; E={$_ | Get-AdvancedSetting - name devices.hotplug | Select value - ExpandProperty}}

  • My screen shows only 1/4 of the image. I can scroll to get up and down. How can I fix?

    My screen shows only 1/4 of the image.  I can scroll to get up and down.  How can I fix?

    Hello

    1. You did changes to the computer before the show?
    2. The problem occurs with a particular application or any application?
    3. If this happens with a particular application, then what is the name of the application?
    Method 1:
    Check if the Magnifier is enabled on your computer. Check out the link and follow the steps to change the size of the screen. Check whether the problem is resolved.
    Method 2:
    This problem may also cause if a computer monitor or the screen resolution is changed. Check out the link and follow the steps to change the resolution. Check if the problem persists.
    To change the screen resolution, see the link:
    Change your screen resolution
    http://Windows.Microsoft.com/en-us/Windows-XP/help/change-screen-resolution
    To change the monitor resolution, see the link:
  • Hi, I need to download the acrobat PDF after registration and cc payment, I get the new which is not available for mac ist... How can I solve this problem... I use only the mac...

    Hi, I need to download the acrobat PDF after registration and cc payment, I get the new which is not available for mac ist... How can I solve this problem... I use only the mac...

    If you had bought subscription Acrobat Standard / stand-alone product , you need to cancel the subscription / order and re - register / re - order subscription Acrobat Pro DC / stand-alone product.

  • Hello my creative cloud application is empty and showing only white, I can't update or no matter what I tried to re-isntal and nothing and I try too update via photoshop and also said, if I try to update via photoshop I get this Adobe Application Manag

    Hello my creative cloud application is empty and showing only white, I can't update or no matter what I tried to re-isntal and nothing and I'm trying to update also via photoshop and also says, if I try to update via photoshop I get this Adobe Application Manager is required to solve this problem. However, it is missing or damaged. Please download and install a new copy of Application Manager of 'http://www.adobe.com/go/applicationmanager'.  but I also can't help using the application manager

    Follow the procedure below:

    N ° 1)

    Adobe Application Manager trash from Applications > utilities.

    Step 2)

    Click on the link below and download Adobe Application Manager and install the same.

    http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

    Once the installation is complete, a niche will disappear.

    Then open " Applications" folder and locate the launch of Adobe Application Manager icon and double-click it and update.

  • Recovery 'Where' in Finder Get Info

    I need to be able to see what the URL of a file has been downloaded from to determine if this file is legitimate. Because Finder displays this information on the 'where' line in the read window information, I hope that there is a way to get it back. How this is possible, with naked AppleScript or shell script?

    In Terminal:

    LDM-name kMDItemWhereFroms file

    or

    LDM-name kMDItemWhereFroms-raw file

  • Satellite C660: HARD drive space shows only 20 GB of free?

    Toshiba Satellite c660 with 320 GB of disk space, it shows that 2 hard drives or 2 partitions, one called data shows only 20.6 GB of free on 148, but when I go in there I can only find at maximum approximately 50 GB even with all the backups?

    Hello

    There are more partitions on the HARD drive.
    You can see it in disk management.
    Right click on computer and select manage.
    Now you should be able to go to the disk management which will show you all the available partitions.

    A hidden partition is used for the Windows 7 backup files that are needed to fix the Windows 7 in the case where something goes wrong with the OS.
    Then, you can find a Windows partition and the other partition is used for HARD drive recovery. The point is that you are able to run the system recovery from the HARD drive without the use of the recovery disc (recover disk must be created using the recovery disc creator)

  • Re: A500 power icon shows only % left and duration (estimated) no real

    Hi I bought an A500 last week. Very happy with its features etc., however, I have a question where the power icon shows only % left.
    For some reason, it does not display the weather remains as it is supposed to. I took it back as long as you 'Out of Box', but the problem persists.

    I rang tech support who told me to take it to the nearest centre of Toshiba. Sms technology had me the next day to say that the task is complete. When I arrived at the shop and asked what was wrong, he said that nothing was wrong. "This model displays only the % and no time. I asked him where he has got that info from, it was Toshiba. He said that he checked the A500 on display for sale in store and that too showed the %. Then I jumped on the view model and verified by myself and here he showed the hours and the minutes remaining. He then said he would have another look.

    He even rang Toshiba who said that he could not be a hardware problem. So basically he and the person he spoke did not have a clue. Portable old man of the week, and I refuse to accept a machine that does not react as it is supposed to. Even the manual user talk taking system a few seconds after the power is cut to calculate the remaining time.

    During this time is there anyone out there who has experienced this or know what the problem is?

    See you soon.

    My a500 also shows % left and no actual (estimated) time :) To be honest, I don't think it's so important to worry.

    > I took it back as long as you 'Out of Box', but the problem persists.

    This means that this feature is not available.

  • Windows resource monitor shows only a CPU core when he should have four.

    Windows 7 Home Premium 64-bit, SP1
    Intel Core i3 2330 m-hyperthreading

    Resource monitor normally indicates two nuclei and Hyperthreaded (a total of four graphs) when seen on the tab CPU recently single core (one graph) is displayed. This change is caused by one of the updates of Windows or an indicator of a hardware problem? Is there a recommended KB or a patch that solves it?

    original title: change of resource monitor (?)

    You asked: "what version of Windows 7 do you have?" ... Home Premium x 64, SP1 as indicated at the beginning of my first post.

    As my screen name, incurably curious, says I couldn't let it go. Assistance in the meantime, I searched tirelessly and found a cure. I had to make a change through msconfig. I don't have any idea how the settings have been changed because no one else is using this machine.  [????] (Microsoft Security Essentials and Malwarebytes returns own scans; so I doubt that the cause is associated malware.) The following explains what I've done and the results.

    1. I went into msconfig > startup > advanced options and find the number of processors, set one. The arrow to expand a menu drop-down has also shown that a single processor. Which did not make sense because my processor Intel Core i3 2330 M's two core with hyperthreading.
    2. I unchecked the box and restart the computer.
    3. I returned the number of processors as described in #1 above. Expand the menu gave me the choice of 1, 2, 3 or 4 processors. I chose two and checked the box.
    4. I rebooted the computer again.
    5. I checked the monitor of resources (via the Task Manager) and found multiple graphics, I'm used to the display. The graphics are labeled: Service use of the CPU, CPU 0, 1 parked CPU 2 CPU and CPU3 parked.
    6. Parked CPU1 and CPU3 parked show no activity, which is expected. These show only activity when hyperthreading is active, which is rare with the programs I run. Only programs written specifically to hyperthreading use the feature.
    7. CPU utilization service CPU2 and CPU0 show activity as expected.
    8. Manager tasks shows four graphs still now.

    The reason why I know not what to expect is that I have upgraded RAM and completed cooling there are a few months and one of my tools use resource monitor to control the computer. (I used other means to monitor the internal temperature). I managed to run enough programs to use more than 7 GB, the 8 GB available RAM and CPU usage Dungeon in the range of 75 to 100% for more than an hour during trials. Hyperthreading (CPU1 and CPU3) clearly indicated to be active too. Time CPU ran in the range 165F without additional cooling and order of 125-130 with additional cooling.

    I will wait for return of the answers with explanations and/or questions until I got this mark as resolved.

  • on this forum, how can I access previous issues published.  This shows only recent messages?

    on this forum, how do you get published earlier issues?  This shows only recent messages from a few minutes to Twitter.com.  I had posted a question yesterday and can't find it to view responses by others.

    Top right, go to more in the flow of connection.

  • Contact-> Service request - show only the SRs that belong to the user

    Hello

    Here's the scenario:

    User has access to all Contacts and can see did not have SRs.

    The role of user - can read all records = YES

    Profile of user access

    Contact - Readonly
    Related information under the Contact section:
    Service request - View (inherit primary does not appear in the drop-down menu)

    When I login, I am able to see all the Contacts (directed by role play) and also all SRs associated with this Contact.

    Problem: Only SRs belonging to the logged in user should appear. SR the other user should not be visible under the contact.

    I've seen examples of the use of ' inherit primary. " This option is not available.

    How to get this functionality? (Contact - read all records and associated Contact SNS should show only users registered in SRs)

    Here's a way to do this:

    -Instead of the Service request related information on the Contact details Page, create a Web Applet, and incorporate a report that resembles the Section Service request information.
    -Filter this report with a session variable, connection name and use this login name to filter the corresponding column on the report. On the report, add a link to action on the SR # so agents can pierce the ther SR detail page and update etc...

    This way the user will see only those SR what he or she has.

    -Royston

  • Pptx to PDF conversion issues - images disappear or showing only in pieces

    Recently, I have my pptx to PDF files conversion problems.  I'm on Windows 7, Powerpoint 2007 and have tired both Acrobat 10.1.2 than Acrobat 9.5.

    When I choose Save PDF of PowerPoint, it publishes, BUT many of these images (created with powerpoint with shapes and clip art) disappear from the PDF file.  Some of my pptx files have been converted without problem (using the combination of pptx & Acrobat 10.1.2) - However, if I come back in a do even a simple change (even to the text) it will NOT convert to PDF with precision - once more images will be missed and I get an error message.

    I tried to fix my Acrobat - which did not change the results. I also tried to go to an earlier version of Acrobat reader, and that no longer works.  I even uninstalled and reinstalled Acrobat, restarted my computer - etc.

    I'm at a bit of loss - since I have not had problems in the past?  This question seems recent - in the last two months.

    Any ideas where I could watch or what else I could try?

    Thank you very much for your ideas!

    Loreen

    HI Bill,

    I work with Acrobat - not a 3rd party.  Maybe I'm missing something but my Word and Powerpoint 2007 do NOT have the option of printing to the Adobe PDF printer - it is NOT listed or available (I think from my research that Microsoft has more than a provision to issue with Adobe?).  The ONLY way I can find to create a PDF file (by Adobe) of Word and Powerpoint 2007 is the Save as function.  The MS Plugin was for the function "save under"-I have that already have in place.

    This problem is recent... I have created a complete PDF of the document photographed above there are a few iterations.  The only changes that I made to the document were changes in texts... I then went to save in PDF format and this time... you see the result... pieces of missing images.  I wonder if there is a bug or something is the most recent update of Adobe Reader 10.1.2?  Or if there is somewhere else I should be looking to try to resolve the problem.

    Thank you very much for your ideas!

    Loreen

  • When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

    When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

    The iPhone's battery is fully charged?  Otherwise, load it, and then try again.

    If it is busy, go in recovery mode as explained here.  You may need to try to get into the mode of recovery once more to succeed.

    If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

  • How can I customize my new tab page to show ONLY the websites that I want?

    Whenever I use the new tab it allows me to add some sites, but also displays the sites recently visited, but also the best sites. I want my new tab to show only sites I have add in 4 columns and 2 rows as what I had in my chrome.

    Hi, it won't show recently visited until you have completed all the tiles with your own. When you have added a site that you want to keep here - PIN. See - customize the page new tab.

    More info on the page tab that could be of interest.

    You can change the number of tiles on the Page of the new tab to zoom in or out (Ctrl and + key, or Ctrl and - key).

    You can also keep the same zoom setting when a new tab is clicked: Type Subject: config in the address bar, press ENTER, accept the warning, scroll to browser.newtab.preload and double-click on it to change the 'value' of true to False.

    It is also possible about: config to change the maximum number of tiles, scrolling to the browser.newtabpage.columns (or Rows), then right-click > modify to set a new number of 'value '.

    As an alternative, you might like to try the add-on new tab tools.

    If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

  • My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

    My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

    I don't think there is much you can do about it outside the use of workaround to reload the page until this problem is corrected.

    There is this bug on this problem:

    I don't know if other extensions download suffer from this issue, as well, so you can try a little more try the website of the add-on and if possible use a different format like WebM, if they are available.

    Also note that not all videos are downloaded and registered correctly. Some may have a size of 0 bytes and fail to download, so, best is to check in downloads of the toolbar Manager in the drop-down list to make sure that the file size is correct (i.e. neither 0 bytes, but a more likely size).

    YouTube streaming makes changes to the code and the way its web pages work, so extensions can fail at any time.

Maybe you are looking for