Get lost with the controls on the panels

Similar Questions

• Have XP Pro with the Panel open, click on add/remove progs - nothing happens. All the other c/Panel open Fredrick help OK

  Have XP Pro with the Panel open, click on add/remove progs - nothing happens. All the other c/Panel open Fredrick help OK

  Hey Fredrick,

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Run the following command:

  Start, run, Appwiz.cpl

  Check if you can run the Add / Remove programs.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Why do I get problems with the challenges of poker Facebook poker?

  Why do I get problems with the challenges on facebook poker? have reloaded JAVA.didn't work

  URL of affected sites

  http://

  I'm not sure what that requires the application of poker, but perhaps solutions in the article of problems with some Facebook games, cat and more will help

• When I try and play games my computer crashes or I get BSOD with the error Stop: 0x000000F4.

  Hello, I recently built a computer and installed all the software, drivers and updates of windows that I needed. Go and try to play games, I can play for a little bit. Then my computer crashes or I get BSOD with the error Stop: 0x000000F4. Generally before that happens, Skype will plant give me a message that says "error disk i/o" If that helps. How can I fix this problem so that this error does not happen again? It happened several times. I tried to reinstall the CMOS battery on the motherboard. I have the latest firmware of my SSD and drivers for my card mother and graphics card. My specs are:

  Windows 7 x 64
  I7 - 4770 k
  ASUS Z87 - a
  Corsair Vengeance 8 GB 1600 Mhz
  Modular power supply Corsair HX750
  Liquid chillers H80i Corsair
  EVGA GTX Superclocked 760 ACX
  Samsung 840 120 GB SSD (boot disk; the games installed on it)

  Hello

  To help you, we will need files DMP to analyze what exactly happened at the time of the accident, etc.

  If you don't know where the DMP files, here's how to get to them:
  1. go to the Windows\Minidump folder.
  2 copy all the DMP files in the Minidump folder on your desktop and zip then those files.
  3 download the zip containing the files DMP to Skydrive or a Web hosting of your choice and paste in your answer.

  If you plan to use Skydrive, but do not know how to download it, please see the following:
  http://www.WikiHow.com/use-SkyDrive

  Please note that all "cleaner" such as TuneUp Utilities, CCleaner, etc., default will remove files DMP when using because of their place too.

  If your computer doesn't generate DMP files, follow these steps:

  1. start > type systemroot which should show the Windows folder, click it. Once inside this folder, make sure there is a Minidump folder created. If not, CTRL-SHIFT-N to create a new folder and name it Minidump.

  2. Windows key + key Pause. This should appear in the system. Click Advanced on the left system settings > advanced > performance > settings > advanced > make sure there is a check mark for "manage automatically the size of pagefile for all readers."

  3. Windows key + key Pause. This should appear in the system. Click Advanced on the left system settings > advanced > startup and Recovery > settings > failure > ensure there is a check mark next to "Write an event to the system log" > make sure that "automatically reboot" is unchecked.

  Ensure that the partial memory image is turned on and make sure the path is % SystemRoot%\Minidump.

  4. check that the viewers is ENABLED:

  Start > Search > type services.msc > on the name tab, search for Windows Error Reporting Service > if the service status is not started, then right-click and select start. Also to ensure that, under Startup Type set to automatic rather than manual. You can do this by right click, select properties and under general selection on 'Automatic' startup type and then click on apply.

  If you can not get into normal mode to do this, please do so via Safe Mode.

  Kind regards

  Patrick

• We have 4 CS3 design facilities std and 3 sets of CS3 and a connector series CS4. The downgrade (d) CS3 serial was lost with the crash of the PC on which it was installed. How to receive a new donwgraded CS4 CS3 serial?

  We have 4 CS3 design facilities std and 3 sets of CS3 and a connector series CS4. The downgrade (d) CS3 serial was lost with the crash of the PC on which it was installed. How to receive a new donwgraded CS4 CS3 serial?

  The PC is an installation of Windows 7 Professional 64 b NL.

  Hi,

  The downgrade isn't possible for customers Volume of the former traditional products... license for individual buyers.

  Kind regards

  Sheena

• I work in InDesign CS5 and have a problem with the panels on the right. Some of them are empty. Ideas?

  I work in InDesign CS5 and have a problem with the panels on the right. the panels color chart, paragraph styles, and totally blank menus link. I pulled upward from publications that I already worked on and they are still virgins. I tried to load styles from other pubs, ID, and that does not work either. I can see them when I go to create a new style and use BASED on function.

  Any ideas?

  Try to restore your InDesign preferences. Here's how:

  FAQ: How to reset or 'trash' preferences?

• I can't get contact with the cloud

  I can't get contact with the cloud. The icon on my desktop is black and the wheel turn and turn and turn. What should I do?

  OK, great, I hope that the link of this thread (shown below) helps you then your situation. App does not open. Wheel of progress turn continuously

  http://helpx.Adobe.com/creative-cloud/KB/unknown-Server-Error-launching-cc.html

  Keep us informed.

• Service request not getting associated with the Contact

  Hello
  
  We have an interface between the Web site of our company and Siebel On demand application, visitors can come to our Web site and submit a request by filling out a form with their contact information and their request. In turn, this creates a folder 'Contact' and a 'Request for Service' in the Application folder,
  
  'Contact', we used WSDL and v2.0 "Request for Service" WSDL as the webservice interface, we find that the Contacts and requests for services are created as that individual records, service demand does not get associated with the contact record is created?
  
  We are capture the following information under the heading "Contact".
  First name:
  First name:
  E-mail:
  Phone:
  Address:
  
  and the following information under the 'Service request'
  Product information:
  Object:
  Description:
  Type:
  Status:
  
  Should the specify us anything else under the Service request in the interface that will associate the Contact and "demand for services.
  
  Is it because in version 2.0, each object exist as separate nodes that we are facing this problem?
  This will be solved by using v1.0, is there a limitation any using v1.0, please specify
  
  You can call me if you need additional information
  
  Thanks and greetings
  Satish Kumar
  + 1-857-869-0239

  Hello

  When you create the Service request, make sure that you set the field "ContactId" so that the created contact is associated with the SR created.

  -John CRMIT

• Updates of windows installed and now unable to get online with the Explorer.

  I am running windows vista and installed updates and now cannot get online.  I tried to run the system restore, but that did not help.  This happened once before when the only web sites that I could access were secure web sites, I have changed the security settings and that fixes the problem.  Nothing works for now.

  I'll get more info from my computer at home tonight and add to that tomorrow.

  Thank you!!

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  =========================

  Error message after you install an update of Windows Internet Explorer from Windows Update or from Microsoft Update: "cannot display the webpage".
  http://support.Microsoft.com/kb/942818

  If not help to tweak the parameters of your third-party firewall, try the following:

  1. disable your antivirus, all modules of Norton (as applicable), a real-time protection provided by an anti-spyware application (with the exception of Windows Defender; includes the Tea Timer of Spybot, AVG AS guard.exe, SpySweeper guards, etc.), disable the third-party firewall AND THEN select Windows Firewall.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) except #4 below until your antivirus application has been reactivated!  If you use a free ZA firewall, you may need to uninstall instead of disable.

  2 uninstall 'update Cumulative security for Internet Explorer 7 (or 8) for Vista (KB976325)' or "Security Update for Microsoft Windows (KB976325)" via start | Control Panel | The Maintenance and the system (if you use Classic view, skip this step). Windows Update | Installed updates day & reboot.

  3 d - c #1 above.

  4 manually run Windows Update and install important updates available (i.e. KB976325).

  5 reboot & make sure everything in #1 above is on again and, if necessary, disable the Windows Firewall and enable (or reinstalling) your third-party firewall.

  =====================================

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems with the Panel tabs with CS5, CC2014, CC2015?

  I created a script with TabbedPanel in ESTK CC, works very well in afx CC 2014, but it seems that there are some problems with the other versions (CS5 and CC2015).

  Can someone help how to generalize the limits and the tabs?

  Here is my Code briefly for the tabs.

  //

  //

  //

  function buildUI (thisObj) {}

  var myPanel = (thisObj instanceof Panel)? thisObj: new window ('pallet', 'Gear of Stress', undefined, {resizable: true});

  myPanel.timeSavers = myPanel.add ('tabbedpanel', [0,0,400,300], "Reducing Stress V1'");

  myPanel.timeSavers.cProject_tab = myPanel.timeSavers.add ("tab", undefined, 'Project');

  myPanel.timeSavers.MyTools_tab = myPanel.timeSavers.add ('tab', undefined, 'MyTools');

  myPanel.timeSavers.Explorer = myPanel.timeSavers.add ("tab", undefined, 'Explore');

  myPanel.timeSavers.Others_tab = myPanel.timeSavers.add ("tab", undefined, "Install");

  Return myPanel;

  }

  var myToolsPanel = buildUI (this);

  //

  //

  //

  Below the results to remain CS5, CC2014, CC2015. How to promote the universalization of the buttons, tabs, alignments etc as in CC2014 in other versions. Someone please help?

  

  Don't you think that the resource string could solve this problem?

  You can certainly try a resource string. I used only once I understood how they worked, I find it much easier to build a UI in this way.

  myPanel.layout.layout (true);  Tried it, but all child elements arranged in a line or column that's it, do not respect the limits specified.

  To a resource string, make sure that every single container element specified margins or spacing info. If they do not have this set the automatic layout manager will just default to each calibration of control internal specifications, which vary with each version of AE.

  How can I universalize the user interface for all versions of EI? While I'll change once and for all.

  There is no miracle solution for all versions of AE to play nice with your construction. You to beta-test your code in each version of the EA you want your script to run on and then unique questions individually. Your script should contain a checker version AE, so you can know what patches, you need to implement when the user runs the script. It is not ideal and is one of the many oddities of software development based on the API of someone else.

• Mice do not interact with the panels.

  I have CS6 wich I just DL a few weeks ago for the school, I do not use plug-ins or other add on software. The problem is that my mouse will not interact with the signs, (that is to say of layers, swatches, and such a) in InDesign. So far Photoshop Illustrator and bridge all works fine it's just ID I have problems with. On the panels I can get it to open the group but he has no interaction with fine details, selecting layers, double click on name to rename locking display and open the layer options, create new layer button will also does not work, I can use the options in the upper right part of the Panel for some things , but it let me limited on what can be done. I can not even use my mouse to switch between the layers. An idea on what can be causeing this and what I can do about it. (Yes, my mouse works, he is in charge and interacts with other software and games without a problem)

  Win 7? Disable Aero or set the font to 100% in exploitation

  System.

• Problems with the panels at startup

  Sometimes all the panels (palettes) when I run the application InDesign open as a single panel with dozens of tabs.

  This means that I have to re - sort all the panels, with some of them closed, some of them in the dock and other open (Floating (planer).

  Does anyone else have this problem?

  What are the causes and there at - it an easy way to get results to display correctly?

  I suspect that it is a default preference, but I'm not sure.

  CS3 incidentally.

  Yes, it usually comes to the top as you left it... at least, for me, it was good for years. Never known of problems like yours, but if it happens, I think, personal workspace is a way forward. At least, you can restore your panels easily, with a single click. As far as I know, there is no other settings in the preferences or anywhere else on this topic.

• I get BSOD with the key USB TV Tuner PX1211E-1TVD

  Hi all

  I just bought the model tuner TV USB Toshiba px1211e-1tvd and whenever I turn it on I get a blue screen error on my hp Pavilion dv6821el pc... dv6000 series.

  I tried to update the BIOS and the driver of my pc's display, but without results...

  The USB device is properly installed and the program (savvy tv) included with the cd as well, but I still get the Blue error screen...
  The operating system is Windows Vista...

  What can you suggest me to do folks?

  Please... I need help :-(

  Hello

  The BSOD appears usually due to a hardware problem problem or software commutabilite.
  I think in your case it s a software problem and I recommend updating the driver.

  The new driver could be found on the European driver Toshiba page in the Options area.
  On the driver page choose this:

  * Options-> Office Accessories based-> tuner TV USB hybrid TV Tuner Windows Vista 32 bit *.

  There you can find Savvy TV driver.

• HTTP GET method with the body of the message

  Hi all

  I work with an API using HTTP to make calls to a server. I met an API call in the documetnation that uses the HTTP GET method with a message body. It seems that this is not supported by LV14 because I do not see an entry of message body for the LabVIEWHTTPClient.lvlib:GET.vi function. The POST methods and COULD appear to be banned for this API call, I a not found 405. I could be stuck with the help of GET.

  Certainly, this isn't recommended GET method - but it is not explicitly forbidden in the HTTP/1.1 specification. Is there a work around to submit an HTTP GET request to content? I have to use HTTP external DLL to achieve?

  All entries would be great.

  Thank you

  Richard

  Seems to be a problem on the server side?  Maybe I misunderstood what you were trying to get?

• Registration and getting started with the INK HP INSTANT

  Registration and getting started with ink HP Instant

  Note: your printer must be connected to the Internet via a wireless connection.

  How does that you will always have ink HP? Your printer uses Internet to let us know when to send more ink. Here's how you can get all the ink you need, delivered to your door.

  1. Buy an eligible printer.
      
  2. Enroll in a plan based on the number of pages you print.
     Ink, cartridge recycling and transport are included.
     No annual fee, change or cancel your plan anytime.3
  3. We'll will ship special HP Instant cartridges.
     Our cartridges have more ink than the standard HP ink cartridges, so you'll replace them less often.
  4. Billing service and begin after inserting your first instant HP ink cartridge.
      
  5. Your printer will tell us when to send handwritten entry.
     Your service is not based on how many cartridges you use, so print as many pictures of high quality that you want.

  • You will always have ink before you need it.
     
    

  LoneStarBob wrote:

  I received my first ink (three colors) of HP cartridge. check the two original instant of ink in the printer cartridges they show two 3/4 full (identical). Puzzeld just why black not sent.

  Hi LoneStarBob,

  I'm going to private msg you on it to help track.

  Thank you

  Ciara