Get Queue Status output / empty the queue

Hey everybody,

I am trying to create the program that will record all the data in a queue after a number / deadline is met.

However, when you try to save the output of the Flush queue / status of the queue, I'm not sure how to proceed. My original entry is a group of 4 elements.

The output shows that it is "an array of clusters of 4 elements..."

My initial approach was to: change of the table to a group (of 8 items)-> separate each element in another group 4 elements-> merge each specific item to get a unique flow of each of the 4 original elements.

Result: 1 table-> 1 cluster-> 8 clusters-> 4 data streams, each stream of data representing one of my pieces of original entry (my goal).

However, this seems to be a long process and I can't help but feel that I'm on in a much simpler way to do.

I would now like to know if it's the only way I can save each of the indivudual 4 elements in the original 'picture of clusters of 4 elements' produced from the Flush queue / status of the queue?

Also, is there a way to save/log ALL the data directly from the Flush queue / get an output of status of the queue (jump cutting/splitting of process data)?

Thank you!

What you really want to do, is use Dequeue item inside a FOR loop.  Inside the loop, ungroup you your cluster and the output values of the wire.  Let the loop FOR the autoindexing and you will have a different picture for each item in your cluster.

See the example I did here: http://forums.ni.com/t5/LabVIEW/TDMS-File-starts-recording-data-at-20Hz-but-after-a-short-time/m-p/3...

Tags: NI Software

Similar Questions

  • Why I get this trying to empty the Trash: the operation cannot be completed because the item "IMG_0645.jpg" is in use

    After selecting and dragging some photos of Photo on the desk I have their attached to an e-mail and sent them to the coast. Then I selected the 5 photos on the desktop and put them in the trash. When I tried to empty the trash later I received the following message: the operation cannot be completed because the item "IMG_0645.jpg" is in use.

    Aren't these photos on the desktop 'copies' of the originals in the Photo?

    All wise users out there with an answer?

    stop, disconnect all external devices

    Restart your computer in safe mode

    Try safe mode if your Mac does not end commissioning - Apple Support

    empty the trash after checking the files in there are of no use to you

    arrested again

    Reconnect the external devices

    reset.

  • How to get an audio output to the TV via HDMI on my satellite

    I have connected to the TV via HDMI to view downloaded content from BBC.
    How can I get the sound?

    Go to the control panel-> Sound-> playback tab
    Here you must choose a digital output as default device.

    Also check this:

    + HDMI port allows her too?
    + http://aps2.toshiba-tro.de/kb0/FAQ9401AY0001R01.htm

  • Trying to empty the queue through dbms_aqadm resulting in error

    Hello

    I'm emptying the queue through dbms_adadm in the respective user schema, resulting in error

    Procedure:

    DECLARE

    Po dbms_aqadm.aq$ _purge_options_t;

    BEGIN

    Po. Block: = FALSE;

    () dbms_aqadm.purge_queue_table

    Table of the queue = > 'XYZ_QUEUE_TABLE '.

    purge_condition = > po);

    END;

    /

    Error:

    PLS-00201: identifier 'DBMS_AQADM' must be declared.

    Check if the required privilege is granted to your USERS access to the SYS. DBMS_AQADM. Also if a public synonym for DBMS_AQADM is not defined then you will need to prefix SYS during the call to the package.

  • How to get the status returned by the last process

    I use LaunchExecutableEx to start the Java executable. Once this process ended it returns a value. How can I get this value? GetLastError () does not work.

    Hello

    I call my CVI programs also sometimes other executables.

    Best method to get data out of them is to direct the output to a file, and then read and parse the file.

    "myOtherExe.exe > out.txt" ordered an executable output to the output window of file and no standard.

    Once the executable has ended, you can read the file to get information about its status.

    Kind regards

  • Get rid of the warnings to empty the trash in El Capitan

    I don't want the warning that appears whenever I emptied the Recycle Bin. It has always been a way to get rid of this in earlier versions of Mac OS X. How can I get rid of it in El Capitan?

    You can empty the trash without confirmation dialog by pressing: option + shift + command + DELETE.

  • At the start, get a 'install status.msi' but the application is not on the computer

    At startup I get an "installation status.msi' but the application is not in my computer. Anyone know what this means?

    Hi Leo,

    The reference to status.msi file refers to the HP printing software. To solve the problem, please access CD HP printer and reinstall the software print or when you get the message about install Status.MSI please insert the HP printer disk and it will install the status.msi file, you will not receive a message to install it in the future

    ---------------------------------------------------------------

  • VM combining the Get - And Get-VMGuest CSV output

    Hello

    I am trying to generate a CSV file that combines different properties between the cmdlets Get - VM and Get-VMGuest but struggled.

    I am aware that the cmdlet Get - VM will give me an output like the number of processors, amount of memory per VM, vm name etc., but also want to retrieve properties such as its IP address, running OS, hostname, etc in the same CSV report.

    I tried to mix the taste.

    Get-vmguest - vm (get - vm). Select-object vmname, osfullname | Export-csv c:\vm_osreport.csv

    and a previous post by LucD-

    --------------

    Get - vm | %{
    $_ | Select name. Out-Default
    $_ | Get-VMGuest | Select the State, IPAddress, OSFullName | Out-Default
    }

    Now if you want the result in 1 object (or an array of objects) you could make

    Get - vm | %{
    $vm = "" | SELECT name, State, IPAddress, OSFullname
    $vm. Name = $_. Name
    $guest = $_. Get-VMGuest
    $vm. State = $guest. State
    $vm. IPAddress = $guest. IPAddress
    $vm. OSFullName = $guest. OSFullName
    $vm
    }

    --------------

    but can't seem to get what I want. Basically, I'm looking for is the output to a CSV file - next

    • vmhostname
    • IP address
    • numCPU
    • memoryMB
    • Allocated size of HD
    • GuestOS (as reported by VMTools)
    • Datacenter + file (if possible)

    Can anyone help please?

    Thank you!

    Given that the ownership of comments is present inside the VirtualMachine object returned by Get - VM, you can get these values without running the Get-VMGuest cmdlet.

    Something like that

    Get-VM  | Select Name, @{N="Hostname";E={$_.Host.Name}}, @{N="IP addr";E={[string]::Join(',',$_.Guest.IpAddress)}}, NumCPU,MemoryMB, @{N="HD size allocated (KB)";E={[string]::Join(',',($_.HardDisks | Select -ExpandProperty CapacityKB))}}, @{N="GuestOS";E={$_.Guest.OSFullName}}, @{N="Datacenter";E={Get-Datacenter -VM $_ | Select -ExpandProperty Name}}, @{N="Folder";E={$_.Folder.Name}} | Export-Csv C:\report.csv -NoTypeInformation -UseCulture
    
  • How to get the status bar along the bottom

    How is it that ALL the answers shown do not relate to my question?

    It is probably simple enough for someone who knows exactly what to do, please is there noone out there who can help me?

    What I want is my status back bar along the bottom... you should keep the relevant answers to the question

    In WLMail 2011, view tab, click status bar on the Ribbon.

    In 2009, WLMail, Alt, V, layout...

  • At startup I get an "installation status.msi' but the application is not in my computer. Latest resonses do not help

    message says:

    Status

    The feature you are trying to use is on a network unavailable resource.

    Then message says:

    Click OK to try again or enter a different path to the folder containing the installation package "status.msi" in the box below.

    Then message says:

    Use source

    C:\users\HAROLD~1\AppData\Local\Temp\7zSIA68\Setup\Status\

    Then message says:

    Could not find an installation package for the product status.

    Ttry the installation again using a copy valid of the installation package "status.msi".

    Hi Harold,.

    (1) during how long have you had this problem?

    (2) what happens after response are you referring? Please provide the link if you are referring to any position

    (3) remember you to make changes prior to this problem?


    Method 1:
    activate the boot and then check if the problem persists

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.
    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.


    Important:
    n ' forget not to put the computer to a normal startup follow step 7 in the link.


     

    Method 2:

    Run Disk Cleanup to delete temporary files

    Delete files using disk cleanup

    http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  • Get the output of the console on Simulator BB10

    Is it possible to access the console (or at least the stderr) output a basic NDK application deployed to the simulator of th?  I tried telnet in the Simulator to run it, but the devuser does not have permissions on the files of the app.

    Or maybe is there a log of debugging as for Android?

    I would like if possible, avoid using the IDE for this.

    You don't actually run the console application, but you can use command line tools to look at the output of the application log.

    Basically SSH into it (it is not really Telnet) and navigate to the folder of the application under the/accounts/1000/appdata /... then run "tail-f newspaper/journal" after the launch of the app, or just "cat/journal of newspapers". If the output you are interested is no longer attend balls/journal because of the new substance slogger2, you would use a variant of 'slog2info w' instead.

    You are quite correct that attempting to run the application from the console did not give him the same environment and except in a very few cases, it serves no real purpose.

  • How can I get help outlook express? When I send a mail, I get an error message indicating the e-mail was sent not.

    Had problems with Outlook Express.  When I send a mail, I get an error message indicating the e-mail was sent not.  The e-mail has been sent, but it never leaves the output area.  I have to go and delete the e-mail.  Then I don't have a folder of e-mails, except in my deleted file.
    Any help would be appreciated.

    You have apparent dbx file corruption.

    Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

    Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

    In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

    With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

    After you're done, followed by compacting your folders manually while working * off * and do it often.

    Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

    General precautions for Outlook Express:

    Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

    Information on the maximum size of the .dbx files that are used by Outlook Express:
    http://support.Microsoft.com/?kbid=903095

    Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3

    Why you don't need your anti-virus to scan your email
    http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

    Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

    Compact often as specified above.

    And backup often.

    Outlook Express Quick Backup (OEQB Freeware)
    http://www.oehelp.com/OEBackup/default.aspx

  • Get "IPEnqueueError end" while using the ReSubmit utility

    Hi gurus,

    When I tried to submit the message failed with utility to resubmit, I get "IPEnqueueError end" as output. I pasted the result of this test. I use the file system. Please suggest.


    D:\OracleB2B-Installation\OraHome_Cache\ip\install > java oracle.tip.adapter.b2b.data.ReSubmit AC18E5411208A6D52790000013154280
    Resubmision started for the message IDAC18E5411208A6D52790000013154280
    Message Id: AC18E5411208A6D52790000013154280
    getWireMessageID AC18E5411208A6D53B200000131542F0
    Name of the agreement: Test_Agree_Multiple_Duns
    refToMsgId! null
    ACTION: rqRequestIncidentReport; SERVICE: bcRequestIncidentReportv1
    Sender: receiver PG: WINNER actionName: ACTION: rqRequestIncidentReport; DocType SERVICE: bcRequestIncidentReportv1: rqRequestIncidentReport_DT docRevision: 1.0 management: sequence out: null
    The Message queue
    IPEnqueueError start...
    Sequence: null
    replyToMsgID:
    C:\DOCUME~1\V05E4~1.003\LOCALS~1\Temp\ReSubmit_AC18E5411208A6D527900000131542807
    030.PNG xml
    End IPEnqueueError.

    Hi, CEMA,.

    It seems that the internal delivery channel is JMS and in the case of the new format, the message gets queued to IP_OUT_QUEUE.
    Please make sure that oracle.tip.adapter.b2b.defaultIdcOn = true is set to

    Kind regards
    Dheeraj

  • Outlook Express 6 problem: send an email I get an error message and the email is not put in the sent items folder

    Outlook Express 6, Windows XP SP 3

    Problem: send an email, I get an error message and the email is not put in the sent items folder while the email (and attachments, if any) are successfully delivered to the recipient.

    The full error message is always useful, but I'm sure you have damaged dbx files.

    Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

    Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

    In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

    With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

    After you're done, followed by compacting your folders manually while working * off * and do it often.

    Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

    General precautions for Outlook Express:

    Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

    Information on the maximum size of the .dbx files that are used by Outlook Express:
    http://support.Microsoft.com/?kbid=903095

    Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3

    Why you don't need your anti-virus to scan your email
    http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

    Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

    Compact often as specified above.

    And backup often.

    Outlook Express Quick Backup (OEQB Freeware)
    http://www.oehelp.com/OEBackup/default.aspx

  • Registry files have been deleted via a Norton 360 3.0 registry clean up - can't get an ip address from the router

    I'm running Vista Ultimate, -connection (Ethernet) with Verizon FIOS I ran a Norton registry clean and foolishly trust what he says to remove.

    At first, all of my USB cards have been screwed up (noted in the Device Manager with exclamation next to each one points)
    I did a system restore and that corrects this problem, but now I'm having a problem with my network card.
    , All diagnostic tests, etc. show that the material is very good. My router is also fine the problem is that windows can't get an IP address from the router and then assigns his own
    (a # 169 instead of a # 192)
    In the network connection properties, it says that the device is functioning correctly, and the driver is up-to-date.
    'Connection speed' tab: a window of diagnosstics is: I ran testto test adapters connect to connect to the network.
    Results: connection Test
    Test details:

    I have "this card is configured to obtain an IP address automatically. No DHCP server is present on the network. Windows selected an IP address by using the alternative private IP addressing. »

    X "Ping 0.0.0.0 Gateway: failure.
    !  "No DNS server is available for this connection.
    ! "No WINS server is available for this computer.
    X "Ping 0.0.0.0 network: failure.
    ------------------- -------------------------------------------------------------------------------------------------------------
    In this same window of diagnostics under the "LinksTab".
    Link current test status: (what is determine the current connection speed of the adapter and link partner)
    Results:
    ! The adapter is configured to negotiate the speed with the link partner, but 1000 Mbps was chosen as one of the possible speeds.

    The best link options-results of the speed test:
    ! Could not detect way reliable speed and duplex settings. Possible speed/duplex settings are 100 Mbps Full Duplex and Half Duplex 100.
    (Note that these link tests are online and I can't online)

    Also in the Diagnostics window-under the 'Cable' link cable - past-polarity is normal.
    Depending on the tab is the Hardware tab
    Hardware diagnostics check for I/O conflicts...
    Results: all the tests:
    EEPROM test
    FIFO test
    Test register
    Interruption of the tests
    Loopback test

    I also went in the prompt type in IPCONFIG... c which shows:
    Ethernet connection to the Local network card:
    ConnectionSpecific DNS suffix: (it's completely empty here)
    Link-local IPv6 address: fe80::bda9:951 d: 619f:a0dc 9%
    Autoconfiguration IPv4 address: 169.254.160.220
    Subnet mask: 255.255.0.0
    Default Gateway: 0.0.0.0

    I also have a sort of ping command here-cant remember the command, but the results were in the CBS... I didn't know how to reach. He however escape from something on the registry files.

    I went throughD-Link Tech router (router) support is good, Fios Tech support everything set up right, - Norton support(Norton denies that the files were not to be touched-although their report shows these registry files were deleted)-Dell Tech support because my warranty missed 3 weeks ago - although I still have the "your Tech Support team until 2013 - which is valid only if you have a hardware warranty-made no sense sold me the car without. the engine - directed the FTC to bring a complaint about it - after I get this fixed number.

    I hope someone can help... by the way I get perfectly in line with my laptop - I know this isn't my router. I'm sure it's due to some registry files being moved-(j'ai eu deles de messages d'erreur indiquant que les fichiers de Registre ont été endommagées ou manquantes) what do I do now? No system restore to restore this part of the register - I also installed the drivers from the dell drivers and Utilities disc - but maybe I've done that correctly? I put the disc - extract files-(he says they have been unpacked) was a new step for me to do after that? Help, please!
    Thank you!

    Hello
     
    We recommend that you install the router (see its manual) and the pilot of NIC once more and check the difference. In the first post, you mentioned that you decompressed or extracted files. Once the files are extracted, you will be asked to install the driver. However if you do not receive any prompts for the driver, then you will need to locate the destination folder where the files are checked to find the configuration file.

    Open the destination folder where the files are extracted and run the Setup file to complete the installation.
     
    To download and install the latest network card driver, visit the site Web of the manufacturer of the device or system.
     
     
    I hope this helps.
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.

Maybe you are looking for

  • Satellite C660-1LD is super slow

    Hello I'm having a problem with my Toshiba Satellite C660 - 1LD PSC0QE Let me share the problem. So I have to use without the battery, most of the time when sudden power failure happens my laptop turns off also. Then I have problems starting upwards

  • Keyboard on V7-482PG problems

    The two shift keys on the keyboard of my laptop are randomlynot registration. I've confirmed that this is a problem with the keyboard itself by 1) to install the latest drivers for the whole system, 2) make sure I'm on the last update of the BIOS, 3)

  • Cannot restore the go - .prpproj file association

    I have installed Premiere Pro 2015.3 CC, but now the file in Explorer .prproj association no longer works.Tried to change by "open with...". "but the first does not appear in the list of"other programs. "Browse used to manually add but which does not

  • S10 - 3T battery problem

    Hello. I have a problem with my ideapad s10 - 3T, which has 2 GB of ram and w7 starter. Problem is AC adapter will charge the battery and when the machine is closed the flashes of power led white. I removed the battery and connect the AC adapter to s

  • Overview of the pixelated images when paused

    Having a problem with my first CC 15. When I play the images, it seems normal, but as soon as I stop the images, it looks like the attached picture. I already reinstalled first and still having the issue. I tested the same project on another computer