Get rid of the Welcome screen login

Similar Questions

• Get rid of the Welcome screen in Indesign CC 2014

  Impossible to find a discussion about this since 2011.  When I scroll to the bottom of 'News', 'Start' or 'tips and Techniques' there is no checkbox "disable."  It is a huge waste of time.  I could even live with the 'Create' screen at startup but can't get there either.

  Dang, I didn't read the title of this thread pretty closely.  For InDesign CC 2014, the link provided by Salah is correct.  To save you from reading through it all here what you need to do:

  (1.) be sure that you are actually connected to creative cloud of in InDesign.  See the Help menu and be sure to see you 'Sign Out (your ID Adobe here)'.  If on the contrary, it says "Sign In", and then select this menu item and connect properly.

  2.) now exit then restart InDesign.  At the bottom of the "New" tab, you should now see the option to disable the Welcome screen.

  Mark

• How can I get rid of the splash screen in Flash Pro cs6

  I used flash in its early versions, but didn't have a reason to use it for many years. I installed it on my desktop and now find myself needing to use it for a small project. So I open the program, and of course, it is open to this really annoying splash screen. and it turns out that I can't find any way to leave this splash screen. My screen resolution is at 1024 X 768, and I can see easily all the splash screen. But what I don't see is somehow too leave this screen which is a real issue because it allows me to continue my project. I even chose one of the enumerated option; "Flash project", but still the splash screen does not disappear.

  How can I get rid of the splash screen & can I make disappear forever. ???

  When you open CS6 and that you can't get anywhere, you can always select Preferences. There, under general, you can select which shows when you open Flash Pro. Change the welcome move on screen.

• I want to get rid of the Bing screen, but there is no "menu at the top of the Firefox window" for me "Select tools and then select the Add-ons menu item.

  I suddenly have a 'Bing' screen when I connect on Firefox - and I want to get rid of it. The support section of Firefox says
  1 "in the menu at the top of the Firefox window, seledt tools, and then select the Add-ons menu item." - but I don't see any 'menu item' tools, or much less modules.
  2. "in the window modules, click the Extensions Panel"- but how to find the Modules window?
  3. find the Bing and extended support to search toolbar in the list and then click on disable for each of them. ' - but what and where exactly is - this?

  At the top of the screen is only an icon of Yahoo to the left and to the right of it, a search box, 'Web search', 'My Apps,' Yellow Pages,""Weather","Updates"and"Skype ". to the right of the people, there is a green cross saying "add more applications. to your toolbar"and to the right of this one kind of gear shift looking icon saying"toolbar settings ".
  So, in short, how can I get rid of the Bing screen and how to access these tools?
  Thank you.

  Versions of Firefox 3.6 + have a feature to allow the user to hide the Menu bar.

  Press the Alt key to temporarily show the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.
  
  The F10 can also be used on most PCs to temporarily reveal the menu bar.

  https://support.Mozilla.com/en-us/KB/menu+bar+is+missing

• Is it possible to get rid of the splash screen, the screen of the app and go straight to the desktop?

  Original title: I h8 windows 8.

  I don't like having to go through two screens to start my computer and two screens to close.  Add the startup of the screen and the screen of the application tiles does improve performance, they interfere. I don't see what's the difference between have icons on my page tiles and the application windows on my screen, except that the former is more efficient.

  Is it possible to get rid of the splash screen, the screen of the app and go straight to the desktop?

  Easy solution for this. You can download the Start button after the installation your computer will work like all the other previous windows and ordinarysoft.com. You will have all the programs with your button/start menu 'start '. The installation start opt to escape metro and you never see it again. Tell me if you have any problem to find the button start or downloading from the link I told you. Its free of cost.

• Get rid of 2014 welcome screen and import settings shortcut and previous workspace

  Windows 7 Ultimate / 64-bit

  I managed to install DW CC 2014 but it do not find or import all of my CC / spaces working or shortcuts. Is there a way to get these settings in the new program. I also want to get rid of the DW CC 2014 welcome screen and see no option to "do not show this again," as in previous versions.

  Thanks in advance,

  Joe

  You turn off the Welcome screen in Edit > Preferences > General > disable the Welcome screen check box.

  You should also be able to sync settings in Edit > synchronization settings, I don't know what covers all that well.

• How can I get rid of the widgets screen?

  Since the upgrade to iOS 10, a widget screen when I start my phone.  How can I get rid of this sort my identification of access/contact code screen appears when I turn on the phone?

  Thank you.

  With iOS 10, if you see the widget screen by sliding the lock screen is normal and how the new iOS.  It is more action 'slide to unlock' available in iOS 10.

  To operate the unit and go directly to the password entry screen (if you are using a fingerprint recognition), press the home button twice.

  In iOS 10 from the lock screen, are the only gestures by scanning

  1. slide from right to left to bring up the camera

  2. slide left to right to bring up the widgets screen (from the widget screen, swipe down to search for).

• Hi my name is Vanessa, could someone help me get rid of the 'Blue Screen of Death'

  I have Vista Home, 2 minutes after the start up, the blue screen appears and stop, can operate in Mode safe mode, I can't seem to download Service packs or updates McAfee antivirus software? Thank you

  If everything works in Mode safe - which indicates that, for me, something that is normal (as an application) or some loading driver (material - such as video device, etc.) is the origin of the problem since those who would not charge mode without failure.

  You can use MSCONFIG in safe mode to clear a lot of things that would normally load and boot into normal mode.  See if it crashes.

  If it's not - start adding things back using MSCONFIG once both and restarting between each to determine if it starts crashing again and you have added back that will be the culprit.

  If it plant, it could be a driver that has been recently loaded.  Maybe you enabled Microsoft update to install a new video or audio driver driver or driver of network or something.  You can go through each of those in safe mode and see if you can roll back the driver for each of them, one at a time, to an earlier version.  Start in normal mode after each fold and see if find you stability.  All that you can't cancel them were not being updated since you have the system. ;-)

  It is a good starting point.

  For a more complete list of things, commissioning...

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  You want to scan your system to see if you actually have some virus/malware?

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

• How can I get rid of the blue screen error?

  Original title: Windows Vista Start does not

  Hello
  I have Windows Vista Home Premium, and I've had it for 5 years now (2006-) the problem is that I don't know what happened, but when it restarts, I have two options;

  Startup Startup Repair (recommended)
  Start Windows normally

  When I choose "Start Windows normally", a blue screen appears with an error message and disappears quickly, leading me to restart my Vista again. However, when I select Launch Startup Repair tool, it takes a while and after a bit, it ask if I want to send the error to microsoft (recommended) and I choose Yes, and it takes a little more time to look for a solution. Finally, a list of appropriate actions appear;

  Startup Repair; I tried this 8 times now, and he cannot find a solution, leading me to reboot once more.
  System restore; I tried ALL the dates of the restoration, and none of them worked. I got an error saying: it cannot restore.
  Restore the computer; 1. I don't have a backup drive (it's a shame, I know) and 2. I don't want back up and lose all my files.
  Windows Memory Diagnostic tools; I checked all hardware error, and none have been found.
  Command prompt; I don't know what to do with it.

  If someone can PLEASE help me, I would be VERY grateful. I have very old memories and photos on this computer and I don't want to lose these. I am begging for someone to help me, and my last priority would be to forget all these photos and files and move: (.) Oh and I tried running safe mode, by pressing F8 while the computer restarts and I've highlighted Mode safe mode with networking, but it gives a quick overview of a blue screen just and hangs on reboot. Please help me on the procedure to follow for the good of my IMPORTANT files and memories.

  Thank you, in advance.

  Hi AffanX,

  Method 1: Try to disable automatic reboot in the menu start-up advanced options, and then try to capture the blue screen error message, see the link below:

  Advanced-Startup-options-including-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode 

  Method 2: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  After disconnecting all external devices, run the Startup Repair

  Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540

  You can see the steps below for more information

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  (Article above applies to Windows Vista)

• Question from windows vista - get stuck on the Welcome screen.

  I recently had my computer startup problems - it gets stuck on the home page, even if I restart it continues.  If I'm doing a ctrl + alt + delete, and then it displays the desktop.  I have no updates that must be accomplished.  you have an idea why this is stuck?  Thank you!

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A210 PSAFGC - Bios Update to get rid of the white screen problem

  I also have the white screen problem and I would like to update my bios to version 1.30, it came with.
  The problem I have is that I have a number of room A210 model PSAFGC.
  Support bulletin 98082422 for the update of the Bios does not have my room exactly number and I can not find something for my model.
  The 2 updates are at 1.70 and 1.90. I read the text of these two, and they seem quite different.
  Don't know what to do. Here is the info of the bulletin.

  Resolution:

  Update the BIOS of the computer to resolve this problem, by clicking on the link in the following list for your computer model.

  -Satellite A210 / A215, Ref. PSAFGU: BIOS version 1.70
  -Satellite A210 / A215, Ref. PSAEGU and PSAELU: BIOS version 1.90
  -Satellite Pro A210 / A215, Ref. PSAFHU: BIOS version 1.70
  -Satellite P200D / P205D, Ref. PSPBLU and PSPBQU: BIOS version 1.40

  REF. of the computer it is printed on a label on the underside of the case.

  Any help?

  Hello

  The Satellite * A210 PSAFGC * series seems to be a Toshiba * Canadian * series and I would recommend checking the Canadian driver Toshiba page if you want to download the compatible BIOS for your laptop.

  Here is the link to the page:
  http://support.Toshiba.ca/support/download/ln_bymodel.asp

  Best regards

• How can I get rid of the logon screen?

  Original title: How do IRBs of splash screens and lock?

  I'm the only person who uses my computer. I need not sign in on my computer every time I turn it on. Can someone tell me how to disable the services of thease. I want to Windows 8 commissioning, as Windows 7. If I can't close the thease I think I'm going back to Windows 7. It was still a better operating system.

  Hello

  Thank you for contacting Microsoft Community.
  Yes, the feature is available. But before you activate, make sure that you only use that uses the PC, as is the administrator account, if everyone turns on the PC, they will have access.
  So, go to the bars of charms, click settings, click Change PC settings. Go to the user. There, you can find this text under options of Sign-in, any user with a password must enter when waking up this PC. Click change the text below. You will be prompted with a warning as shown above. Click Ok. Now the text will go to any user with a password has not needed to go when to wake up this PC. Now, when you start the PC, won't be asked to log on credentials.
  Response if the issue is not resolved.

• How can I get rid of the full screen in mac 10.7.5. I have no 'F' key

  Ive tried the small arrows at the top right etc. should I give up with firefox?

  The key so 'F' just the key you are using the type of character 'f' and not a special key

• How to get rid of the Windows Media Center Nag screen?

  I do not expect to use Windows Media center. Well, I don't really understand what it is, honestly. But I get the screen of horse to 'watching TV' on my computer. It's the last thing I want to do with my computer.

  How can I get rid of the nag screen that keeps popping up?

  Thank you very much

  Jack

  Hello

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Rebuild the Media Centre.

  Your index requires virtually no maintenance. However, if the index looking for files that you know problems must be in a location indexed; You may have to re-create the index. This can take a long time to complete, so avoid this step unless you have given the index enough time (several hours) to correct the problems first. To rebuild the index:

  1. open indexing and search by clicking the Start button Options, click on the Control Panel, clicking system and Maintenance, and then clicking Indexing Options.

  2. click on Advanced Options, click the index settings tab and then click on rebuild.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 2:

  Enable and disable the Media Center to enable Windows features turn on or off.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  a. open them turn Windows features on or OFF.

  b. Locate and expand multimedia features.

  c. clear the check box for Windows media Center to turn off. (Check the Windows media Center to turn on)

  Note: Restart the computer after you enable and disable the media Center.

• Get rid of the highlight around the border when a TableView Gets the focus

  Hello
  
  Is there a way remove the highlight around the border of a TableView when it gets the focus?
  
  Thank you.

  The relevant css of caspian.css to /sdk/rt/lib/jfxrt.jar is:

  /** Draws focus border around tableview */
  .table-view:focused {
      -fx-background-color: -fx-focus-color,-fx-box-border,-fx-control-inner-background;
      -fx-background-insets: -1.4, 0, 1;
      -fx-background-radius: 1.4, 0, 0;
  
      /* There is some oddness if padding is in em values rather than pixels,
         in particular, the left border of the control doesn't show. */
      -fx-padding: 1; /* 0.083333em; */
  }
  

  To get rid of the update screen, just define a css stylesheet customised for your application that replaces the table: pseudo-class concentrate, for example:

  .table-view:focused { -fx-background-color: transparent,-fx-box-border,-fx-control-inner-background; }