Get several errors in the hard drive and the slowness of the system XP
COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ? Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,.
* original title - mistakes, mistakes, mistakes and Everwear *.
COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ? Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,.
Please be specific on what you mean by "far from many errors on the hard drive." What kind of mistakes? Do you mean the drive read errors? Please quote the error message you get exact, verbatim.
How many mistakes is "too much"? How many times they do they happen? They occur only when doing certain things or anything?
If you really get a lot of the drive read errors, the drive is defective and must be replaced.
But if you're talking about freezing, slow, etc. This is another question entirely, and I wouldn't call it 'errors on the hard drive. The little info you provided the mind, it is difficult to know what this problem is, but one of the things these days plussusceptibles is malware infection. What antivirus do you run (they are far from being just as good, and some of the most popular are among the worst). Do you also run an anti-spyware program? If not, it's * very * likelythat you are infected. I recommend that you download and run the free MalwareBytes AntiMalware to http://www. Malwarebytes.org/products/malwarebytes_free
Tags: Windows
Similar Questions
-
I get an error message saying: hard drive crash is coming.
Advised to replace the hard drive in my HP Pavilion. I've been doing this for a year or more. So I make a return to the top and it stops for a month or two and then back. It seems that it is a false message. Anyone with similar problems and if so should I really pay attention to that. I have keep nothing on this computer, that's why I ignored the warning. I have one year rest on the security of the computer.
http://welcome.HP.com/country/us/en/contact_us.html
My advice is: use your warranty.
Contact HP and tell them your problem and ask them a hard drive replacement.
See you soon. Mick Murphy - Microsoft partner
-
I get an error that the system stops at the Insider by nt 1073741482 administration/system code
It takes a long time for the computer to boot up then when I sighn he takes a lot of time for personal to load setting. After that they load I donot have a task bar to start down as I used too
roper589,
It seems that this error is due to a virus. You should try to run a scan for viruses on your system. You can try to start safe mode and run a scan with your antivirus. If you do not have an antivirus program, then you can start using the safe mode with networking and try to run a free scan online here: http://onecare.live.com/site/en-us/default.htmLet us know if you are able to run a scan or not. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Question
I have another type of problem with Firefox
Description
My hard drive and the Extras have plenty of space. Yet several times each and every day, I'm getting flashed "virtual memory minimum insufficient..." Virtual memory pagefile... "Any joy? Please help if you can. Thank you. Cecilia.
This has happened
Each time Firefox opened
Only a few weeks ago, (tried everything)
Troubleshooting information
?
Version of Firefox
3.6.3
Operating system
Windows XP
User Agent
Mozilla/5.0 (Windows; U; Windows NT 5.1; en - us; RV:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
Plugins installed
- -Adobe PDF plugin for Firefox and Netscape
- Default plugin
- Shockwave Flash 10.0 r45
- Windows Presentation Foundation (WPF) plugin for Mozilla browsers
- Java plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)
- Npdsplay dll
- DRM Netscape Plugin store
- DRM Netscape Object network
Read about virtual memory here: http://www.ehow.com/windows-xp-virtual-memory/
-
I recently had to reimage my hard drive and need to reinstall CS5. When I do I get an error stating: another instance of deployment is already running. I tried to get back into market and stop before trying again to install.
I tried several times to reinstall without success.
Help, please.
Hi John,.
Scott, please see the steps mentioned in the link below.
It could be useful!
Rayyan
-
I can't save Acrobat 8 standard after a hard drive failure and keep getting an error every time I try and use it. Is that what I can do to get rid of the message. The message reads "a problem has been experienced while trying to send information on the internet.
Hi philh76405255,
I'm sorry for the inconvenience caused.
Please refer to the following solution: -.
(1) find the file acrobat.exe on your computer. Right-click on the program and click "troubleshoot compatibility". Set the compatibility of the operating system installed on your computer.
(2) if it asks you to register several times, please refer to this doc. KB: easier to register several times. Acrobat 8 | Windows
That might solve your problem.
In case if you have still any question, please let us know. We will be more than happy to help you.
Kind regards
Nicos
-
I reinstall CS4 after failure of hard drive and everything works - photoshop, Indesign - EXCEPT Acrobat 9 Pro. I am running Yosemite on iMac. I reinstalled Acrobat from the disks, but when I open I get that Word to Acrobat in the finder without other menus - the application does not open. As a first step, I get an error message.
Acrobat has detected there are missing components
Adobe Pdf Finder
Adobe PDF Viewer plug.
What is the cause? If yes where can I get.
I tried to uncheck the boxes, but no difference.
Is this or an activation problem
Thank you
K
Hi Kate,.
Acrobat 9 is not supported on OS of Yosemite.
You could face compatibility problems.
Kind regards
Rave -
I had to replace my hard drive and can not get my Photoshop CS2 9.0.2 to activate. I tried the phone and the Web site and have two serial numbers. I can't find a number that strives to speak to a live person at Adobe. I need to reduce the size of the pixel today on some photos and need the program. Is there another way to reduce pixel if I can't get my Photoshop runs today?
See the page linked below. Your installation/serail number will not work. You need to acquire a download for it with a specially assigned serial number...
CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
-
Winsock error
Hi I have a winsock error, so IE won't connect, even though it says I have full signal. I got the fix for microsoft programs, nothing has worked, if I format the hard drive and reinstall xp it will fix the problem. Thank youHi I have a winsock error, so IE won't connect, even though it says I have full signal. I got the fix for microsoft programs, nothing has worked, if I format the hard drive and reinstall xp it will fix the problem. Thank you
Check that your antivirus (all-in-one suite If you have one) is not turn off your network traffic.
Note the devices installed in the machine. Use this information to download the latest version of the drivers and software for the manufacturer's Web site features (on another machine and store on an external support, I suppose, would be the only way for you to do.)
Uninstall the software/drivers for network devices. Turn it back on. Even if pilots are found/installed automatically, manually update the drivers & software using the files you downloaded earlier.
Download, install, execute, update and perform analyses complete system with the two following applications:
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)
Search online with eSet Online Scanner.
Open a command prompt and run the commands following one at a time (after each ENTRY) without leaving the part through if somehting started working... Note all errors and post them here.
netsh winsock reset catalog
ipconfig / renew
ipconfig/flushdns
ARP d *.
nbtstat - RR -
My computer crashed and the system recovery was the only option. I know this reformats the hard drive and actually returned the PC to factory State, but I cannot now access all of my old emails and contacts on OE. I managed to configure OE once again, so I can receive messages via my site, but really need to come back to the 'old'. Any help would be greatly appreciated
My computer crashed and the system recovery was the only option. I know this reformats the hard drive and actually returned the PC to factory State, but I cannot now access all of my old emails and contacts on OE. I managed to configure OE once again, so I can receive messages via my site, but really need to come back to the 'old'. Any help would be greatly appreciated
Two points:
Suggestions 1. see Bruce Hagen, but it is highly unlikely that you can get everything back. When you perform a system recovery, you lose everything that was on the disc.
2. it is late to tell you this, but like you apparenly had no backup on external media, you're playing with fire. For the future, you can read this article I wrote: "how to return your computer regularly upward and reliable" to http://www.computorcompanion.com/LPMArticle.asp?ID=314
-
New error message after upgrading the hard drive and operating system installation
Hello
I replaced the hard drive and was able to install the CD recovery successfully. I replaced a 200 GB with a 250 GB. Everything booted up ok, however, I made up the internet and has been advised that I am successfully connected to the internet, my laptop shuts down: and restarted with a Long written below in bold error message. The Message reads:
"A problem has been detected and windows has shut down to prevent damage to your computer.
IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follo as follows:
Check that a new hardware or software is properly installed. If it is a new installation, ask your hardware manufacturer or software, the windows updates, you might need.
If problems continue, disable or remove any newly installed hardware or software. Disable the Bios memory options such as implementing caching or shading. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical information:
STOP: 0X0000000A (0X00000002, 0X00000001, 0 X 00000064, 0X81FA4DAE)
Data collection for the crashdump...
Initialization of the disk for the crashdump...
Dump of physical memory start disk: 100
Complete physical memory dump.
For more assistance, contact your system administrator or technical support group.
The error message was dispelled that I changed the memory of 64-to-5300. Then I did about 5 days of windows updates and now my laptop is up and running thank you very much!
-
I am currently using Lightroom 4. I bought the IMac with the largest memory, but he has quickly filled. To conserve space on my computer, I bought a hard drive and I tried to get my lightroom back up there. (I don't know if I did it correctly or not) Now, all my photos in Lightroom are "offline or missing", and I have no idea what to do next. Any help would be greatly appreciated.
I guess you mean not memory and disk space, you want to clear space on the internal drive. Is this correct?
If you have moved your photos somehow (this is not a backup), please follow these instructions to reconnect photos in Lightroom. Adobe Lightroom - find folders and files moved or missing
In addition, you must (it is obligatory) make real backups of your database catalog and photos, that means accurate identical copies, made by a method automated and placed on a different physical disk than the originals. Lightroom allows you to make backups of your files of catalog on a regular basis, it is an option under the catalog settings. To make backups of your photos, you need some third party software to do.
-
I nowhere hand, I get this error message "the application could not start properly (0xc000001g). Click OK ot close the application. "I have uninstalled and reinstalled several times.
Hi Kingsberry and almathof,
Please refer to this thread: Re: Premiere Pro 2015 won't open after the recent update
Thank you
Regalo
-
Was able to download and install the Prime Minister, but cannot install Photoshop Elements - get several error messages (software hacked, etc.). Any ideas?
Download from adobe.com or prodesigntools.com site.
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
- Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
window using the Lightroom 3 link to see these "important Instructions".
-
I tried to reload a CS3 program previously downloaded on my new hard drive and this is the message when I click the English link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp
Make sure you have cookies enabled for your browser. Try using a different browser if the problem persists.
Maybe you are looking for
-
Timeline scroll bar disappears when the trackpad is on
Recently, I connected a trackpad to my iMac. Then I discovered that the scroll at the bottom of the timeline in FCPX bar has disappeared. So I disconnected the trackpad and restarted FCPX, and the timeline scroll bar reappeared. Then, I learned tha
-
HP Envy 7645: Register for instant ink
I would like to register for the Instatnt of ink. My printer is currently more ink (that's why I want sign up) so I can not print the page with the claim code. How can I get the code and signed for the moment ink without having to go buy a new cart
-
Glimmer of hope ThinkPad Edge 13 LCD
Hello world I just got my ThinkPad Edge 13 Friday and am really pleased with the look, the feel and performance. However, it is a small (maybe 5 x 5 pixels) light spot on the LCD screen, on the left side in the middle. Just to be clear: it is not a d
-
If the error code 43 makes you uninstall WLDD, replace with?
Accoding to what I could find, WLDD is a driver of hardware compatibility. For example, if you delete it, you create compatibility issues... To avoid these problems, you have to replace it with something that will make your compatible hardware... Wha
-
Como desbloqueo clave para entrar como usuario?
album the clave, como una of obtengo, el computador me rechaza porque no recuerdo clave?