Get the 12002 error code when trying to send emails

Original title: mistake in the AJAX request

While he was trying to send mails, I get this message

In the AJAX request error

XMLIhttp State 12002-unknown

Just a beginner with computers

Hello


1. What is the email client that you use to send and receive email?
2. the problem occurs in any webmail?

Answer comes back with the answers to help you best.

 
Hope that helps.

Tags: Windows

Similar Questions

  • get the 8024000 error code when trying to install sp2 to vista tried about 6 times

    Windows says I have 1 important update, when I try to install the update I get an error code 8024000

    I installed sp1 without problem, but have tried about 6 times with sp2 and nowhere

    Hello

    Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

    You can not install Vista Service Pack 2 and get the error 8024000.

    If you receive the error Windows Update 8024000, it means that Windows Update is unable to read a file (update manifest) that is required for installation.

    I suggest you follow the steps in the site:

    Windows Update error 8024000

    http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Update-error-8024000B

    I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

  • Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

      I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

      Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

      OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

    keimanzero,

    Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
    First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
    NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

    Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

    Secondly, I suggest that you run the File Checker system while in the same clean boot state.
    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the field search programs and files .
    2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
      If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
      sfc/scannow

    When the analysis is complete, test to see if the problems facing the system have been resolved.

    If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

    Expert MowGreen Windows IT Pro - consumer safety

  • get a 646 error code when trying to install updatesfor Securty Excel 2007 - KB973593, Microsoft junk email Filter (KB977839); Microsoft Word 2007 (KB974561) and Microsoft Office System (KB973704)

    get a 646 error code when trying to install updatesfor Securty Excel 2007 - KB973593, Microsoft junk email Filter (KB977839); Microsoft Word 2007 (KB974561) and Microsoft Office System (KB973704)

    http://www.Microsoft.com/downloads/en/default.aspx

    Put the KB numbers in the search at the above link > manual download them.

    If this does not solve it:

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Get the 8024401c error code when you try to update.

    Get the 8024401c error code when you try to update. Tried various fixes - neither works. The message also says that I have installed no update, i.e. no history of update that is false. Any ideas.

    Concerning
     
    Original title: run Windows 8

    Solved the problem. Changed the configuration of updates of ' install updates automatically (recommended) to "check and download (do not install). Updates are now being downloaded and my choice to install.

    Thanks for your help, Jose Antonio, I learned how to scan my computer now!
    Regards Gary
  • I get the 0x8078012D error code when I run the Windows backup on an external hard drive.

    I get the 0x8078012D error code when I run the Windows backup on an external hard drive.  I have Windows 7 Professional.  That suggests this error code is the problem and how can I solve the problem?

    For people who read this thread, I offer the following information.  I solved the problem by noticing that the problem could have been caused, when the system image is created.  So I did a backup without creating the system image and backup is complete without error.

    Then I used the backup program to create a system image.  This time error (0x8007045D) was displayed.   The error report says "the operation failed for a device error encountered with the source or the destination. If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then try again using. »

    So I ran chkdsk/r, and this program is a bad sector on the hard drive of my computer and fixed the error.  It took about an hour to run the program.  Now, the image of the system and the backup of data file work again.

    So I think that the main cause of error (0x8078012D) is deborahgarbe of i/o error (0x8007045D).  So if you get the first error code you can search for fixes for the second error code fix the root cause.

  • I get the A12E5 error code when starting Adobe Application Manager, I use a Mac and want to have Illustrator running

    I get the A12E5 error code when starting Adobe Application Manager, I use a Mac and want to have Illustrator running

    Products of Adobe Creative Cloud installation error A12E5

  • I can't windows media udate player. I get the 0x8007007e error code when executing the validation program.

    I bought this computer new with XP about 5 years ago with no update problems in the past.

    What are the causes of error 0x8007007E ?

    When you use the Windows Update site, you can find that the service is unable to update your computer and returns a "General error":

    0x800a138f

    However, the REAL error code we need is in the Windows Update log.

    The windows update log is in the following locations:

    C:\Windows\Windows Update.log (Win XP only)

    Just copy and paste the above in Windows Explorer and the
    file will open automatically in Notepad on your computer utility.

    Most recent journal entries will be at the bottom. Search for entries of update failed and you will see an error next to him.

    Use the following tips to try to fix the 0x80072EE2 error... After each test point to determine if the problem is resolved.

    The most likely entry that you will see is:

    Error IUENGINE Determining computer configuration (error 0x8007007E: the specified module could not be found.)

    This article explains how to fix the 0x8007007E error code...

    What is the problem of 0x8007007E?

    I don't want to get too technical, but here are the main reasons for this error code is generated:

    (a) there are a number of security and bug issues in Microsoft XML (MSXML) version 3.0 - SP3 Analyzer.

    (b) the 0x8007007E error can also be caused by missing or corrupted dynamic link library (.) DLL files) - CABINET. DLL and URLMON. DLL.

    Here's how to try to solve the problem of 0x8007007E:

    (Step 1) - Windows XP only...

    There are a lot of applications provided with MSXML 3.0. Uninstalling one of these applications on a Windows XP system could potentially remove the MSXML 3.0 assembly files (msxml3.dll and msxml3r.dll).
    We shouldn't have to register only a single file...

    To do this:

    Click on Start menu and then click the icon for the race.
    In the small box that opens, type the three letters: cmd, and then click the OK button.
    In the command prompt window that has just opened (a black background and white text), type the following commands, pressing the ENTER key on your keyboard subsequently:

    regsvr32 msxml3.dll

    Now, type in the word: output and the window will close.
    Now restart and try and Microsoft Windows Update again...

    If it fails with the error 0x8007007E once again try step 2

    (Step 2) - Windows XP only...

    Now lets you update your system with the latest Microsoft XML Parser (MSXML) version 3.0 SP4

    Download here (use the msxml3usa.msi for the English version.)

    Notes...

    (a) you have to reinstall MSXML 3.0 Service Pack 4 If you upgraded to Windows XP to a computer running one of the operating systems following:

    -Windows 98

    -Windows ME

    -Windows NT 4.0

    (b) Windows 2003 Server
    comes with version 3.0 - SP4 and if you do not need to install it.

    (c) occasionally, Setup may need to restart the computer, but fails to inform the user. So restart your machine just in case. Then try Windows Update again.

    (d) to install a localized version (for example English) MSXML 3.0 SP4 on a system different from the previously installed/local (for example the French) version of MSXML 3.0 SP4, follow these steps:

    Cancel the existing record of the installation package by running the following command in a command prompt window:

    msiexec /x {45534579-B75B-4A42-953B-2EF8E1DEB4F3} /qn

    Now, install the new language version of MSXML 3.0 SP4.

    If it fails with the error 0x8007007E once again try step 3

    (Step 3) - Windows XP only...

    Search for missing/corrupted system files...

    Windows XP comes with a wonderful tool called System File Checker (SFC) it scans and verifies the versions of all protected system files after you restart your computer... However, it can sometimes miss a problem, so we can run the tool now to replace the CABINET. DLL and URLMON. DLL, if there is a problem with them:

    To do this:

    Click on Start menu and then click the icon for the race. In the small box that opens, type the three letters: cmd, and then click the OK button. In the command prompt window that has just opened (a black background and white text), type the following command:

    SFC/scannow

    then click OK

    You must be logged on as a member of the Administrators group to run SFC.

    You will need your Windows XP CD during this procedure if SFC needs to get an original file. Remember that Windows XP can have multiple instances of a. DLL to the folder and don't forget what version to which program.

    Notes...

    I was asked if it is possible to have a show of "progress meter" during the execution of SFC... It's the registry hack you need. Please do not go play with your registry if you don't know what you do!

    The system key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]

    Value name: SFCShowProgress

    Data type: REG_DWORD (DWORD value)

    Value data: (0 = disabled, 1 = on)

    IMPORTANT: This article will cure the problem 0x8007007E for many of you. However if it does NOT then I would like to here from you. Alternatively, have you tried something else that worked? Then send me the fix too!

    You can also find these useful error codes - for future reference, especially trying to understand error messages in the Windows Update log! (They are given here as a guide for general problems and further research on your part to solve the particular problem you may have.

  • Get the 0x8e5e0147 error code when running Windows updates.

    Original title : Cannot run windows live updates on vista pc.

    I have windows vista service pack 2 with 32-bit and that you cannot run the windows updates?  I have 11 of them do and tried one at a time and get the same error for all - 0x8e5e0147.  Can someone help me?

    Hello

    (1) do you have made no changes before this problem?

    (2) have what troubleshooting measures you tried?

    Some users corrected this problem by resetting the components of windows updates. Try these steps and check the result.

    Method 1: Reset Windows Update components.

    Log on as administrator.

    a. visit http://support.microsoft.com/kb/971058

    b. click Microsoft fix and run successfully.

    c. restart the computer once the tool is run.

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    Method 2: clean boot

    Download Windows updates when the computer is in clean boot state and install updates

    How to configure Windows Vista to start in a "clean boot" State

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    I hope this helps.

  • received the 0x800106b5 error code when trying to open windows defender

    I can't open windows defender, when I tried, it will display an error message, the 0x800106b5 error code. Hope someone can help me solve this problem

    Hello

    I think you may have the incorrect error number

    are you sure this isn't: «Error 0x800106ba»

    read this information on the Defender:

    ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

    the basics of Microsoft security has its own version of windows defender

    and other anti-virus programs use their own particular type of application to scan for spyware and malware

    It of nothing to worry and is the default action, which is designed for them to do

    If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

    http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

    and here is the method to remove it from startup in vista

    http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

    and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

    http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

         and read this information to microsoft:

    Error message when you run Windows Defender: «Error 0x800106ba»

    http://support.Microsoft.com/kb/931849

    and if you need to change startup programs read this information on the other methods of doing it without using defender

    using msconfig read this tutorial:

    How to use MSCONFIG in Windows Vista

    Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

    http://netsquirrel.com/Msconfig/msconfig_vista.html

    and also try this FREE program Autoruns:

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  • I get the empty error message when clicking on "send & receive in Windows Mail.

    Original title: I receive a blank error message when you click "Send & Recieve" in Windows Mail.

    I recently asked a question in the Microsoft answer that I could access Internet Forum is no longer my favorites to Internet Explorer 8 (although they were always on display in the folder My Favorites in my user account folder.)  Several fixes to this problem have been proposed, but the one that worked was when it was suggested that I might have a corrupted user account.  I was directed to Microsoft link "How to fix a corrupted user profile." I followed the instructions and created a new user account and copied the files to the new account. Was done to correct the problem, and now I can access all my favorites still in IE8 in the new user account.

    However. I am now no longer able to send or receive messages in Windows Mail. When I click on "Send & receive" I get the box that says "some errors occurred while processing tasks requested. Please see the list of errors below for more details. "However, the box below which is supposed to list the errors is completely empty. I contacted my ISP (Virgin Media) provider, who did various diagnostic tests. They told me that this isn't a problem with their security, and they checked my account settings to make sure that everything is correct. They seem to think that this could be a problem with my registry. They sent several messages test (arriving in my web Virgin Media mail box), but for some reason are not getting downloaded in my Windows Mail. On a few occasions did pass the test messages (but only after I closed Windows mail and then reopened.) However, Windows Mail has stopped working again.

    Just once, I got details of an error that has been ' ERR protocol error. Port 110, secure (SSL): 0X800CC90. 0x800ccc18 error number. "However, it was the only time. All other times, the error box is completely blank.

    I would be very grateful if someone could help me solve this problem.  I'm very IT limited knowledge.

    Cody

    I looked in the links provided by Karena & Bruce, but they did not provide a solution to my particular problem.   I must say that I have noticed some improvements to Windows Mail but the button "Send & receive" still does not work properly. I can now send and receive messages.  If there is no message on my e-mail server of the Virgin, access automatically when I open Windows Mail. However, if a new message is sent to me and as I click on "Send & receive" Windows Mail is already open on my computer, I always get the empty error message. The only way I can access the message is to close Windows Mail and re - open once again, when the new message is downloaded automatically. I found a link that says this error could be due to a duplicate news account.  I found that I had two ms.news accounts in my Windows Mail account and remove one of them.  However, this has not resolved the problem, and I'm still only able to receive new messages by the opening and closing of Windows Mail.

    Does anyone have any other suggestions?

  • Get the 8007371B error code when installing update for Windows Mail Junk E-mail Filter [December 2009] (KB905866) _

    When I run Windows Update it shows an important update available. "Update for Windows Mail Junk e-mail filter [December 2009] (KB905866).
    When I try to install the update, it downloads, create a restore point and starts to install the update.  The green bar goes all the way to the right and then I get a "failed" message with a 8007371B unknown error code.
    KB905866 appears in the list of installed programs.  I tried to uninstall and rerun the update of Windows, but he continues to go through the same sequence of activities having the same error message for result.

    Is there a solution?

    Last successful update was (November 2009) 11/11/2009
    First update failed (December 2009) on 09/12/2009

    SP2 has been installed.

    SP2 has been installed 03/07/2009

    Update tool for Windows Vista... (KB947821) has not been installed.

    I'm currently running AT & T Internet security from McAfee.

    This machine had Norton and AVG anti-virus in the past that I don't really know what was running back in July.

    I'm currently running AT & T Internet security from McAfee.

    This machine had Norton and AVG anti-virus in the past that I don't really know what was running back in July.

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

    4. now, make this McAfee "triple fix": http://service.mcafee.com/FAQDocument.aspx?id=TS100507

    Test.

    PS: Please don't substantially edit a message from you after that someone has replied to it or a post later of yours in the same thread. THX

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Why do I get an 0x8007F0F4 error Code when trying to install KB2686509?

    When I try to download the update for Windows XP (KB2686509) Service, I get a window indicating that the update for Windows XP (KB2686509) Service has not been installed.  When I look in 'Your review update history', I have an 0x8007F0F4 error code.  What this means and how can I remedy so that I can download update for Windows XP (KB2686509 Service?

    See this thread:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115C-419D-AC37-03ff8927b79c

    +

    http://support.Microsoft.com/kb/2686509

    MS12-034: Description of the update of security for CVE-2012-0181 in Windows XP and Windows Server 2003: May 8, 2012

    See: what should I do if the installation of this update fails with the error "0x8007F0F4"?

  • Get the 0x8078012D error code when executing backup

    Original title: Windows backup fails, i/o device error
    ERROR:
    Backup Windows: Troubleshooting Options
    Check your backup
    The operation failed because of a device error encountered with the source or the destination. If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then retry the operation.
    Details: The request could not be performed because of an i/o device error.
    [^] Hide details [try to rerun backup] [modify backup settings] [Cancel]
    [Extended information]
    Backup time: 04/03/2013 23:51
    The backup location: \\LG-NAS\service\backup\ThinkPad X230T\system image backup\
    Error code: 0x8078012D

    -------------------------
    • Hello! I'm trying to save on NAS. I don't think that he has never managed to create a backup.
    • Windows 7 Home Premium 64
    • in the case where it is linked, I can't create or restore points.
    • I think that I recently received service Security Essentials finally run. thought that could launch something loose, but apparently not.
    • I sometimes 'Backup Windows cannot find the shadow copy of the source volume' error 0 x 80780020

    Hi Xicus,

    Perform the steps from the link below and see if it helps. 

    0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7

    Hope this information helps.

  • I get the 0x80072ee2 error code when I try to download apps from store Windows.

    Original title: can not download on windows store.

    My Windows Mail app stopped working, so I deleted and tried to download a new one. Then, after a while, I get a message: can't install, error 0x80072ee2

    Had the same Message on other applications too

    Can someone help me with this?

    Not sure if this will help, but my wife became the circle of perpetual rotation trying to launch the app store in Windows 8. We loaded 8.1 to Windows, and then always the same error except that we started having error 0x80072ee2 when it would be dismissed. After trying the "WSReset" and powershell scripts and many other suggestions that I found online, I finally found the cause.

    While the application screen is in place (not), go to right and make appear the parameters. Choose Change PC settings. Then choose network, then choose Proxy. There is a point 8.1 of Windows setting which is "use a proxy server". For us who turned and he should not have been. Turned it off and the app store expenses very well now.
    We could browse internet and other property before this change. The only behavior was that we couldn't get the app store to load.
    Hope this helps you and or other.
    Thank you
    Nick

Maybe you are looking for

  • iPhone 6 touch ID does not work after update iOS 9.3.4

    When I updated my iPhone software 6 iOS 9.3.4 ID touch stoped working. I removed all traces of fingers and tried to add new ones, but it fails everytime and I receive the message in the attached picture. Please notify.

  • Screen rotated 90 deg NEQ I can't get it back.

    I accidentally? papers on the keyboard and raised his eyes and the screen has rotated 90 degrees to the right.  I have the permanent monitor on the end, so I can read it.  There must be a simple solution.  Help!

  • HP LaserJet P2015 light orange

    My orange light on my printer is a constant (not flashing). I checked for jammed paper, turned off and used the Microsoft Troubleshooting Wizard and found nothing wrong with the printer. What should I do?

  • Slow connection with a laptop Windows 7 domain

    When my laptop is outside the corporate network, so that it hangs on the application of user settings the ages when you connect. It's a laptop domain. It's fast but if I disable my wireless before restarting. Can somone please help?

  • Choose 'Download only changed files' and always Muse download EVERYTHING

    I have a fairly extensive site. Had to change a price in the text. Choose "download only modified files. And Muse download everything. Every bit of text, page, pdf format, jpg, svg. EVERYTHING. And always, it takes to download. I have download error