Get the 194:6 error when you try to deactivate CS4

Similar Questions

• Get the "Access denied" error when you try to play all video files in another folder on my external hard drive.

  A couple of days, I've had accidentally one of the folders slipped on my hard drive in the folder above him and was presented with the "Access denied" error messages when I tried the two a) reglisser it out & b) open it from the record she had been driven to (which was not a folder of my making that is a jibberish titled folder containing two .vdm files it contains first)

  After receiving advice of a friend, I did a restore from safe mode on the eve of the day when he moved and he did bring him back with all the files and files in the right place, but now I'm getting an access denied for each file, I try to play. Whether Real Player, Windows Media Player etc none will play.

  Just to test, I slipped a .avi file in the folder to see if he was going to play and he did it can be the folder settings, I'm just hoping that all these files are now not corrupted and unplayable as I have some 180 GB of data in this folder in more than 1000 files.

  Any help is very appreciated.
  Kind regards
  Haley

  Hey HRolston,

  What version/service pack of XP are you using?

  What format of your hard drive is formatted to?

  You can check the version/service pack:

  ·         Click Start

  ·         Right click my computer

  ·         Click on Properties

  ·         On the general tab, under System: you will see your information

  For example: Microsoft Windows XP Professional, Version 2002, Service Pack 3

  You can check what is the format of your hard drive is:

  ·         Click Start

  ·         Click on my computer

  ·         Right click on Local disk (c) (or letter that contains your operating system)

  ·         Click on Properties

  ·         On the general tab, next to file system: you will see the format of your hard drive (Fat32 or NTFS)

  Can't wait to hear back on your part.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I get the message "unspecified error" when you try to create a system restore point

  That this is an autofocus of startoff a I have create, fSystem restoration returns with 'unspecified error', he never worked on my laptop.

  Can anyone help? Thks

  Hi somnop,

  1. What antivirus do you use?

  2. do you get any specific error code?

  Follow the steps below and check, if it helps.

  Step 1:

  Disable all security software and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Do SFC scan and check if the problem is related to corruption in the file system.

  Step 3:

  I know that you cannot create a restore but point as a test, try to do System Restore in safe mode and check if you are able to restore.

  Note: Restart the computer in normal mode after the test.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I get the msvcr100.d11 error when I try to open Lightroom 4.

  I get the msvcr100.d11 error when I try to open Lightroom 4. What can be done. I tried MS Fixit, it uninstalled and said it fixed the registry, but when I reinstalled LR4 he still gave me the missing erroe of MSV CR100.d11.

  What to do next?

  Thank you

  CAL

  You have Visual C++ 2010 Redistributable Package installed.

  If not, you can download the latest version here: http://www.microsoft.com/download/en/details.aspx?id=26999

• I downloaded the trial version of Lightroom on my MacBook running El Capitan. I get the following message appears when you try to import photos: your update of Lightroom 6.3.0 drive to which you import images is low

  I get the following message appears when you try to import photos: your update of Lightroom 6.3.0 drive to which you import images space is low. Delete files or empty the trash to make at least 250 MB available before continuing. ??? What it means? I'm not using a disc, a have a lot of space on my Mac.

  Of course, you use a disk. When you import, you place a copy of your photos on your computer's hard drive (or external hard drive). The meaning of the error message seems very clear. What part of this do you not understand?

• I get the following message appears when you try to open Photoshop... "Could not initialize Photoshop because an of.file - unexpected end has been detected. Help! You can use my Photoshop!

  I get the following message appears when you try to open Photoshop... "Could not initialize Photoshop because an of.file - unexpected end has been detected. Help! You can use my Photoshop!

  Hi romyb,

  End of file unexpected refer and let us know if this helps.

  Kind regards

  Assani

• Access to the Internet and get a "atl100.dll" error when you try to use Firefox

  I just reinstalled Vista Home Premium and everything was going well for two days, but I can not access the internet regardless of the browser that I use and when I open Firefox, I got an error of "atl100.dll", I am afraid that my files cd, especially the .dll files can be altered, where can I find a good (and costs nothing) copy of the file atl100.dll? Please help as soon as possible. Thank you!!

  Original title: Re-installed Vista Home Premium and cannot access the internet & get a "atl100.dll" error when trying to use Firefox and IE just is not access to the internet either

  Hello

  1 did you changes to the computer before the show?

  2. What is the full error message?

  3. who is the antivirus installed on the computer program?

  4 are you using wired or Wi - Fi to access the Internet?

  5. What is the version of Internet Explorer installed on the computer?

  The possible causes:

  • ATL100.dll file is missing, as it was accidentally deleted from your computer
  • ATL100.dll file is damaged by viruses and your computer cannot access the file.
  • ATL100.dll associated with registry files is corrupt and obsolete.

  Perform the steps:

  Method 1: Perform a SFC scan on your computer to fix the corrupt dll files.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Run a scan antivirus on your computer.

  www.Microsoft.com/Security/Scanner

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  Method 2: Reset of internet explore and check. (If you use Internet Explorer)

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  For more information, see the links:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

• Receiving the message 'Fatal Error' when you try to burn BluRay

  I've completed a project of BluRay and I am trying to burn on a DVD.  The process fine until it starts the burn process.  The project is about 19g and I am ttrying to burn to a 25g BD - R bluray.  It takes about 6 hours to go through the process.  When the progress meter displays 100%, it goes into the process of engraving and after a few minutes, I get the message "Fatal Error" and it is she, not other messages and nothing written for the bluray.  I find myself clicking on the "cancel" button which takes back me to the project.

  Execution of the Elements 7.0 on Windows 7 with a lot of horses.  Can give specifications if anyone thinks that this could be the problem.  Is there a way to burn the HD project to the computer and then use other software to burn on my burner internal Bluray?

  Use sharing/Personal Computer / MPEG with the 1440 x 1080 preset.

  It should load right in DVD Architect Studio and give you great results!

• Get the invalid product key when you try to activate

  I bought my lap top with pre loaded windows 7. I bought at the same time from the same shop, Curry, a product key. Enabled - saved my windows 7 online. When I try to use the word, I get a message to activate windows by typing the product key code. When I do, and yes I type in there correctly, he said that only the key code is invalid.

  What is wrong on Earth? Please help me because I am lost the will to live.

  If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:

  http://support.Microsoft.com/kb/2002262

• Get "pdftopdf quit unexpectedly" error when you try to print

  I'm trying to print on a printer Epson Stylus Photo R2400 connected to the Mac Mini. I tried to reinstall the printer driver. Did not work. I then redownloaded the sw Epson printer (has removed the printer from the printers installed and selected again - reinstalled in the system preferences, he got an error message that the printer driver is missing some parts and I would like to fix it - I clicked on repair and it was installing something.) Later he has been admitted in the list of printers.

  I also downloaded the application Epson uninstall to completely remove everything and the printer driver before reinstalling the sw. I get the above error and cannot print. I can print on my Brother laser printer, so this isn't in itself a printing problem, but somehow I bollixed the Epson driver or something in the operating system it uses / needs to be able to print.

  The driver appears to be installed correctly, I can * see * the printer - I can open the printer utility application and work in (checking ink, the ink levels, etc.).

  But whenever I try to print on the Epson inkjet, I get the error "pdftopdf quit unexpectedly.

  Would appreciate any suggestions.

  Have you tried everything here

  Get help to solve the problems of printer on your Mac - Apple Support

  including resetting the printing system

  OS X Mavericks: reset the printing system

• The FTP folder error when you try to connect to a folder on my Web server

  When I try to connect to a folder on my server using Windows Explorer, I get the following message...

  "Windows cannot access this folder.  Make sure that you typed the filename correctly and that you are authorized to access the folder.

  Details:
  A connection with the server could not be established.

  In the knowledge base, kb/260156 says it's because of me having reserved characters.  However, my password has no reserved characters.

  Can anyone help with this?

  Graham

  Hello
  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en/winservergen/

  It will be useful.

• I get the message "unspecified error" when I try to restore my PC. can anyone shed a light on this

  I'm trying to restore my PC and get the same message every time, he reads "unknown error" can anyone help please

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• Why do I get a disabled account error when you try to log on Itunes

  When I try to download an app on my Ipad Air2 I keep getting 'Account disabled for security reasons' reset password. I now have about 40 times and I get quite sick. I can connect on apple and Icloud without problem.

  Hello

  Go to bottom of homepage itunes support itunes.

  See you soon

  Brian

• The ORA-12514 error when you try to connect remotely

  I am trying to connect remotely to the 12 c with SQL Developer Oracle database. In order to connect remotely from another computer, on the server that is running Oracle, I opened a port in the firewall of Windows 7. The listener.ora file, as you can see below, has its default listening port set to localhost.  So, I created second listener called REMOTE_LISTENER, to listen on a different port to 1521.  I put it in place of 1531.  That part worked, but now the listener isn't me in due to this error IN what ORA-12514 earphone does not currently of service required to connect descriptor.

  This is the setting of the SQL Developer on the remote computer:

  

  It's the side server, listener.ora file:

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = C:\app\Owner\product\12.1.0\dbhome_1)
  (= Extproc PROGRAM)
  (ENVS = "EXTPROC_DLLS=ONLY:C:\app\Owner\product\12.1.0\dbhome_1\bin\oraclr12.dll")
  )
  )

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  (SERVICE_NAME = editor)
  )
  )

  REMOTE_LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.19)(PORT = 1531))
  (SERVICE_NAME = editor)
  )
  )

  It's the tnsnames.ora file:

  PUBLISHER =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.19)(PORT = 1531))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = editor)
  )
  )

  LISTENER_EDITOR =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = editor)
  )
  )

  
  ORACLR_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  (CONNECT_DATA =
  (SID = CLRExtProc)
  (PRESENTATION = RO)
  )
  )

  As you can see, I edit the file tnsnames.ora slightly to allow a connection to the database of the editor, but my edit does not seem to fix anything. You will notice that I also updated the port 1531 to match the listener in the listeners.ora file.  I can not connect with SQL Developer on the client side. I am able to connect locally with the SQL Developer on the server, but I need to access the database from a different computer.   I am able to connect to the database using SQL more on the server.

  I ran lsnrctl service from the command prompt. Here is the output of this command:

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)) (SERVICE_NAM

  E = editor))

  Summary of services...

  Service 'CLRExtProc' has 1 instance (s).

  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0

  LOCAL SERVER

  Service "Editor" has 1 instance (s).

  Instance "editor", State LOAN, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0 status: ready

  LOCAL SERVER

  Service 'editorXDB' has 1 instance (s).

  Instance "editor", State LOAN, has 1 operation for this service...

  Managers:

  "D000" put in place: 0 denied: current: 0 0 max: 1022 State: loan

  DISPATCHER < machine: PC SHIERS, pid: 1580 >

  (ADDRESS = (PROTOCOL = tcp) (HOST = Shiers-PC)(PORT=49367))

  Service 'pdborcl' has 1 instance (s).

  Instance "editor", State LOAN, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0 status: ready

  LOCAL SERVER

  The command completed successfully

  As you can see, it shows a service instance named "editor."  It comes, it does not say which port.  You will also notice a service named "editorXDB". Where it went out, I don't know.  It is certainly not in the tnsnames.ora file, and whenever I run the lsnrctl services command port number changes.  In any case, this part, I think, is a red herring.  I've been spinning my wheels on this one for a few days.  If anyone can help me with the steps to connect to a remote computer via SQL Developer, it would be greatly appreciated.

  So now what would be better, it's if we could get the database to dynamically register with the listener as it should so that I get the READY State.  Could help you with this please, then I think we're done.

  
  

  What is the setting for the LOCAL_LISTENER parameter in your database?  To keep things simple, it must be null, which allows the DB to-default - use the 1521 port to communicate with the listener for the record.

  See: (exploring the-local_listener-parameters)

  (SID_DESC =

  (SID_NAME = editor)

  (ORACLE_HOME = C:\app\Owner\product\12.1.0\dbhome_1)

  (GLOBAL_NAME = editor)

  )

  )

  
  

  BTW, * if * you insist on using a listener.ora and you insist on the use of the SID_LIST section in this document, you should really use SERVICE_NAME instead of SID_NAME.

• I get the Firefox crash report when you try to run

  At the instigation of Firefox 9, I downloaded it. I had a crash report. Now, I can not launch Firefox 8 even if it is still installed. I get the accident report, and no Firefox has contacted me because the message says they will be.

  Help, please!

  At the instigation of Firefox 9, I downloaded it. I had a crash report. Now, I can not launch Firefox 8 even if it is still installed. I get the accident report, and no Firefox has contacted me because the message says they will be.

  Help, please!

  Did you uninstall FireFox 9? If this isn't the case, uninstall it, and then run the installer for firefox 8. Yes, it is already installed, but you want to repair then install it over the current installation. If this does not resolve the problem, you need to remove firefox completely and reinstall. You must manually back up your bookmarks if you need to uninstall.
  http://www.computing.cc/Internet/how-to-manually-backup-Firefox-bookmarks/