Get the best out of Satellite 1900-803 processor / upgrade possible?

Similar Questions

• Cannot find the BIOS for Satellite 1900-803

  Hello

  I have a Toshiba satalite s1900-303 (model number-ps192e-00g1n-en) and I'm not.
  I have somehow locked myself out of the laptop. I used to haver a password to use the laptop. This password is not only for the bios, it is also necessary for the operation of the laptop.

  Somehow the password has changed and that's why I can't use the laptop at all. I contacted toshiba store and theyu said to use a loopback serial cable to fix it somehow and he also mentioned in an attempt to crush the bios with a new.

  I would like to try this, but I can't find the Bios or drivers. I was wondering if someone can help me solve this problem please.

  PS: When regestering on the toshiba site I had to enter the serial number for the laptop.
  The model under my name says 1900-803 when the sticker on the laptop clearly said 1900-803

  Hello

  > I have somehow locked myself on the laptop. I put a password for the laptop. This password is not only for the bios, it is also necessary for the operation of the laptop.

  I think that you have set the BIOS password.
  Unfortunately, the BIOS password can be removed from the laptop if you n t know the old password.
  You can not remove also the BOS password by updating the BIOS. If you would try to update the BIOS while the password is set then the ROM module flashes not properly and you laptop will not boot! It s dangerous!

  Only Toshiba authorised service provider can remove the BIOS password. Ask the technicians!

  PS: You book is a model of Satellite 1900-803 and BIOS, drivers, tools, etc. can be found on the European driver Toshiba page in * file Archive!

  Select * Archive Archive Satellite Satellite 19xx *.

  Good bye

• Satellite 1900-803: how to install a USB 2.0 port?

  How to install a USB Port of 2.00
  Where can I get a?
  Need for the new Ipod
  Anyone out there it does or can help please?

  Hello

  As far as I know Satellite 1900-803 supports Cardbus 32-bit/PC-Card 16 - Bit interface and you can use cards PCMCIA Type II (x 2) or Type III (1 x)
  Before you buy the PCMCIA card to USB you should check if it's compatible with your laptop.
  But I agree with Quad. The PCMCIA card is a good solution to use USB 2.0

• Satellite 1900-803: Hi-Speed USB 2.0 card does not work

  I have a portable satellite 1900-803. I recently bought and installed a Belkin Hi-Speed USB 2.0 Notebook Card, but it does not work. Manual of the card says that after the successful installation, I'd see a second 'USB bus controllers' heading which I did not. I even it was replaced by another one thinking that there could be some problems with the drivers, but it still does not work. whenever I plug in a device such as an mp3 player, a digital camera or a usb storage device, windows locks all of a sudden upward, won't move the cursor, the function ctrl-alt-del does not work and the worst of it, I can't turn off the machine!

  the map shows that it runs on any 32-bit location.

  I have the manual and the Device Manager to see if mine is a 32-bit, but I don't really know. This is probably the reason why it doesn't work? or is there another reason to make it work not? If this is the reason why, is there a way where I can upgrade my laptop's pc card slot to make it work?

  Help, please.

  I posted this question yesterday morning and did not get a single response. is it because it has to do with an older laptop? Please, someone, help...

  Post edited by: wes0702

  Hello

  Have you checked the Bios? I guess that the Bios Toshiba was preinstalled on your laptop. Am I wrong? There should be an option to change the PC Card controller mode.

  Here, you can change the mode of the automatic selection, CCIP compatible controller or card bus/16-bit.
  If the card supports 32-bit so you should use the 16-bit option.

  I think you should play a little with this option and possibly that the card will work.

• Upgrade of RAM on my Satellite 1900-803

  My S1900-803 has 256 MB and 128 MB present. The manual says I can add 512 MB in the remaining slot. It specifies SODIMM 144 pin PC-133 3.3V, however I've analyzed the laptop using the CRUCIAL web site and this indicates that this memory is DDR and no SODIMM etc (results below): so who should I believe? and what type of memory should I buy

  Help
  Brian
  -------------------------CRUCIALS RESULTS----------------------------------------------------
  System manufacturer: TOSHIBA
  System model: S1900-803
  Motherboard manufacturer: Null
  Motherboard model: BTR20
  Features of your computer
  256 MB DDR 128 MB DDR PC2100 PC2300 EMPTY
  Maximum memory capacity: 512 MB
  Installed memory: 384 MB
  Available memory slots: 1
  Number of banks: 3
  Dual Channel support: N.A.
  Processor manufacturer: GenuineIntel
  Family of processor: Intel (r) Pentium (r) 4 CPU 1.70 GHz model 1 Stepping 2
  Processor speed: 1694 MHz

  I see that you are a bit confused ;)

  Satellite 1900-803 memory compatible modules are:
  * 200 pin PC2100 (266 MHz) DDR SODIMM *.

  See this page:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5494&ft=m&St=3

  Hope ;) clear now: it s

• Can external CD-ROM, I use it to restart my PC (Satellite 1900 803)

  I have a Satellite 1900 803, my CD internal Rom cannot read the recovery disk, I think I have an external CD-ROM to use it for my recovery disk. Has anyone tried this before and I have to install a driver. My laptop has a USB port. Appreciate the advice and comments. Thank you

  Hi André,.

  You will find that you will be unable to boot your laptop using a USB attached CD. I have yet to find a usb device which will start successfully.

  I suggest you to check the recovery disc in another computer first to check if the problem is with the CD itself or your existing internal CD.

  Good luck

• You are not on the latest version of Firefox. Update today to get the best of the Web!

  Whenever I update my firefox, I get this message, you are not on the latest version of Firefox. Update today to get the best of the Web!

  It - http://www.google.com/firefox - is the old Page to start Firefox used by the Firefox 3.6 and earlier versions of Firefox. I think that Google assumes that you are using an older version of Firefox, as they hard-coded message 'upgrade' in this page - all versions of Firefox see this message.

  From version Firefox 4, Firefox uses a 'local' with the address Start Page of Subject: House. It looks like the old start Page, but this isn't exactly the same thing.

  See - How to set the home page

• I get, you're not on the latest version of Firefox. Update today to get the best of the Web! When I go to the site to update it tells me I have the latest version.

  I start the Firefox browser.
  When the start page shows, I get just below the Google search box:
  You are not on the latest version of Firefox. Update today to get the best of the Web!

  Not unusual, but when I go on the site to update it looking for a minute and then tells me I have the current version of the software.

  If you use the www.google.com/firefox as homepage site that previous versions of Firefox 3 use as homepage you can ignore the message about not using the latest version of Firefox on this page.
  
  Google seems to keep this page.
  
  The current versions of Firefox 4 + is no longer use this website from Google as home page, but use the build-in on: home page as the home page.
  
  Google assumes that you are using an older version of Firefox if you still visit this site, and warns you that you are using an older version of Firefox and invites you to update.
  
  You can use a different page than the homepage as subject: House or www.google.com or www.google.com/ig (iGoogle).

• Why my start page says "you are not on the latest version of Firefox. Update today to get the best of the Web! "when in fact I have the latest version?

  I've upgraded to the latest version of Firefox, but I always get a message on my home page that says "you are not on the latest version of Firefox. Update today to get the best of the Web! »

  You can see this message under the Google search box on www.google.com/firefox which is the old default Firefox homepage. It seems that this page is no longer maintained by Google. You seem to have the latest version of Firefox.

  If you want as the Google search page as homepage, change your homepage to Subject: House (a new version of the old homepage Google/Firefox update is now integrated into Firefox).

  • See-> http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

  Also see-> https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version
  
  You can also see your version on the help > troubleshooting information display

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• How can I get the most out of my battery?

  This video can help get the most out of your laptop battery.

  I hope this video helps to get the most out of the battery.

• Why can't I get the most out of these numbers?

  I want to get the most out of a list of numbers (see attachment). However, when I use the Min & Max table vi, the maximum output gives nothing. My guess is that there is something wrong with the data format, but I'm having trouble understanding how I can solve this problem. Thanks for your help!

  Use a loop FOR and Unbundle.

  

• How to get the computer out of safe mode of power

  How to get the computer out of safe mode of power

  Hello jeffg56,

  I understand that you want to leave safe mode, follow the steps below:

  Exit Safe Mode:

  1. Click Start, type msconfig in the search field and press ENTER to open the System Configuration window.

  2. On the general tab of the System Configuration window, select Normal startup, and then click OK.

  I hope this has been helpful, please let me know if you need more help.

  Thank you

• I have a HP computer and I try to get the best performance on it

  Dear community,

  I have a HP computer and I try to get the best performance on it, but it does not work. I try to update the drivers and use the memory of storge on USB keys and other stuff like using Microsoft Security Essenticals it is sort of: wered because there is no no way around my problem that way happens to you guys, please I want to just play and have the best performance that I can handle it.

  I think I'll put my memory to 8 GB of Ram or 16 GB of Ram.

  Thanks for your help.

  Original title: Windows 7 HP 2000-369WM

  Hello

  Before upgrade you your RAM, check at HP for the specifications of your computer to see what max amount and type of RAM your motherboard will / can use, or download and run the Crucial Scanner:

  http://www.crucial.com/USA/en/systemscanner

  Also, if you use Windows 7 32 bit, 4GBs is the maximum RAM that can be installed, with the exception of Starter which is 2GBs.

  If you are using Windows 7 64 bit, what are the limits of RAM max for each edition (there is no Starter 64 bit)

  http://Acer.custhelp.com/app/answers/detail/A_ID/2729/~/what-is-the-maximum-amount-of-RAM-memory-supported-by-Windows-7%3F

  Home Basic	8GB
  Home Premium	16GB
  Professional	192GO
  Enterprise	192GO
  Ultimate	192GO

  _________________________________

  And follow these steps to keep your device works properly:

  Search for malicious software with the FREE version of this program.

  This is the right link to download included.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• Where can I get the best version of Windows Movie Maker that allows me to publish movies in FULL HD? For WINDOWS 7 RC

  Where can I get the best version of Windows Movie Maker that allows me to publish movies in FULL HD? For windows 7 rc?

  Hello, sebianoti

  Please use the Forum for answers and help to test Windows 7!

  Windows Movie Maker is no longer included in Windows 7. Be sure to check the Windows Live Movie Maker beta available at http://download.live.com/moviemaker.

  Let us know if that helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• New to the blackBerry Smartphones Blackberry and LOVE my Storm! Now, how can I get the best party?

  OK, I am new to Blackberry and devices in general.   I had a Palm, but never really used.   Now, I have a Blackberry, I really want to learn how to get the most out of it.

  I want to get more organized with my calendar and schedule.   I want to keep a list of things to do.  I want that all my contacts easily manageable.

  In my Palm, she had a beautiful desktop app where I could add Notes, or memos or items to my calendar and then synchronize when it would move anywhere in my Palm.

  The B; ackberry Desktop application does not seem to have that same out of the box user friendilyness.    So my question, what program to use, how total, all this together to get the most out of my Blackberry?

  Outlook?   Google Calendar?  Another program?

  Thanks for any suggestions!

  Jamie

  The most transparent way is synchronization with Outlook, via the Desktop Manager.

  Step 1 install Blackberry Desktop Manager Manager of
  http://NA.BlackBerry.com/eng/services/desktop/

  Step 2
  Connect blackberry to your PC via a USB cable and let the blackberry device driver install. During the device driver installation is complete, it will warn 'material installed successfully' in your windows taskbar.

  Step 3
  Run the Blackberry Desktop software and choose the option SYNCHRONIZE.

  Step 4
  Now choose CONFIGURE and you can select the CONTACTS, CALENDAR, NOTES, and databases TASKS by clicking on the boxes next to each. After you select each item, it will ask you which application you want to synchronize with, there are OPPORTUNITIES for all.

  Step 5
  Now click OK on all windows until you are on the main blackberry Desktop Manager screen. Click SYNCHRONIZE. Make sure that the SYNCHRONIZE ORGANIZER DATA checkbox is checked. Now, click SYNCHRONIZE NOW to start the synchronization.