Get the call logs & messages

Similar Questions

• I'm trying to access a wireless network with the password provided for me. I get the following error message

  I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?

  I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.

  In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.

  Hello

  I suggest you to visit these links and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/the-network-password-needs-to-be-40-bits-or-104/f3fdc3ee-CB40-4107-A632-082093dcdcb8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/need-to-connect-to-home-wireless-network-Windows/5bf37a22-cc42-4a0f-9d15-83e780f00123

  It will be useful.

• I reinstalled xp, now get the 'not genuine message' how can I fix this, please?

  Hi, I had to reinstall xp because of a problem I had, now I'm getting the 'non-genuine message' and he failed the validation test. Would it because I don't the have not enabled?  How can I fix this?

  Pleant of assistance needed, please?

  Thanks in advance

  Try the activation of the phone - how to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the letters and numbers (number 8 for the)
  Letter B, etc.).

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once active - Windows Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• User profile service: when I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.

  When I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.

  Isn't that one profile, the administrator and another account are ok

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947215#letmefixit

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• Options of Z10 No blackBerry for contacts in the call log

  Dear all,

  It seems to be a feature missing from the call log.

  You can send SMS, Email, MMS to people registered in the call log.

  in earlier systems of BB, when you open your call log by pressing the green call button, you get a list of all the people who called you, missed calls, dialed calls. Whenever you move the bar on one of these numbers and then click on the Logo of BB button (menu access), you get a lot of different options, including sending SMS or MMS.

  With the new OS 10, this feature is not there. I confronted HELL trying SMS from someone who had just called me.

  I received a phone call from a unknown mobile one of the sellers phone number and he asked me to send him a number by SMS. After getting the number for him, I went in the call log (since it is not stored in my contacts) and tried to view the search options for SMS options. He wasn't there! I had to add the provider contacts and from there, I could see all the options.

  Is it possible to do it from the call log?

  Never tried it before, but he managed to escape earlier. This isn't a fault with Blackberry, here's how:

  1. on the call log, touch the number and hold the key until the menu appears on the right side

  2. click the icon "View details call" high

  3. on the bottom, you can type 'Text' to send an SMS to this number

  Hope this helps

• I get the same error message and cannot open a PDF file

  I have a link to an application that I am trying to download and complete. By default the link my browser to open. what he does normally. However, this document was a mistake. He said that I need the latest version of Adobe. So I downloaded the application, open the PDF file in the app and get the same error message. Help!

  Hello

  You see the following error message when you open the PDF document?

  

  If so, it is a special type of PDF created with Adobe LiveCycle Designer form called "Dynamic XFA".

  Acrobat Reader mobile apps (for iOS, Android, Windows Phone) do not support XFA forms.

  Please download the PDF document on your Windows or Mac computer and open it with Acrobat Reader DC desktop version.

  Please let us know if you have a different problem.

  Sorry for the inconvenience.

• How to get the phone and messages back in my dock apps? And for some reason, I discover now all my app pages from the middle of my phone and not at the top?

  How can I get the phone and messages apps in my dock? And for some reason, I discover now all my app pages from the middle of my phone and not at the top?

  Try

  Settings > general > reset > reset home screen presentation.

  Note: All other applications will be organised by alphabetical order.

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• Since the change of Tiscali to TalkTalk if I click on links in the emails read on webmail, I get the following error message and then I get disconnected from your

  Since the change of Tiscali to TalkTalk if I click on links in the emails read on webmail, I get the following error message and then I disconnected from TalkTalk webmail.

  HTTP status 404 - /cp/templates/applications/mail/html/null.jsp type status report

  message /cp/templates/applications/mail/html/null.jsp

  Description the requested resource (/ cp/templates/applications/mail/html/null.jsp) is not available. Apache Tomcat/5.5.27

  can you help
  

  Please contact the webmaster. The webmaster will then contact us if they need our help. Thank you!

• I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

  I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
  One of the installation files seems to be corrupted. HR:0 x 80070003

  Hello Amawob,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• When I try to send emails via outlook express, I get the following error message:

  When I try to send and email using Outlook Express, I get the following error message:

  The connection to the server has failed. Account: 'HotHot', server: 'smtp.live.com', Protocol: SMTP, Port: 25, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E

  Any help gratefully received. David

  Ok thank you. I received three messages from you, two of the demon and the other Hotmail.

  Hotmail has helpfully includes the originating IP address, so I was able to check further. There is no WHOIS data for it (a bad sign to start), but it is not in the CBL. Read this page to see why it is listed and take the appropriate action. Once you are convinced that your computer - and another using the same network - are clean, you can use the link at the bottom of the CBL page to remove from the list the IP address.

  I still don't know where FCMA comes into it, and diagnostic tests in the NDR is incorrect. It is not the content of the message that is at fault, but I suspect that the block list.

  Good luck!

• Windows Media Player won't rip CD more. I put it in MP3 format. I get the COOD1OD2 error message.

  Windows Media Player won't rip CD more. I put it in MP3 format. I get the COOD1OD2 error message, and by virtue of the clarification it indicates that the error message is COODOFBO which says that the setting of the CD in Device Manager do not match parameter of cd in the drive. I use to be able to rip the CD months ago. I just upgraded to WMP 11 because the sansa clip has not been recognized and updated WMP. How can I fix this.

  Thank you

  Chemtech111

  original title: don't rip CD in WMP

  Format Factory free software is good for ripping
  Music CD.  It might be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  Format Factory - the easiest way to convert CD to MP3
  http://www.thesimplest.NET/PC/simplest-way-convert-CD-MP3
  (scroll to the bottom and start: ("1) Start Format Factory")

• While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

  KB952155 Setup Error.

  While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language. Now, that - what it means and how can I fix it? I have installed SP3

  Eivind Aakhus Hello,

  If you have the latest version of Office installed on your computer remotely, then you need to enable the Active X control.

  Follow these steps to activate the ActiveX module.

  a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.

  b. click Tools, point to manage add-ons and then click Enable or disable add-ons.

  c. in the list view, click to view all ActiveX, ActiveX controls downloaded controls.

  d. choose the one you want to activate, and then select Enable.

• I can't receive emails on Outlook Express. Get the 0x800C0133 error message number.

  I can send and receive Outlook e-mail messages and can send emails on Outlook Express, but cannot receive them on Outlook Express. Get the 0x800C0133 error message number.

  I can send and receive Outlook e-mail messages and can send emails on Outlook Express, but cannot receive them on Outlook Express. Get the 0x800C0133 error message number.   Problem seems to be with the program Outlook Express and think I need to reinstall.  How do you do that?
  Error number: 0x800C0133 = a corrupt Inbox.
   
  Move any message you want to save to a local folder that you create. Then, remove the problem of Inbox as follows.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  With OE closed, find the box of Inbox.dbx and delete it. Another will be created automatically when you open OE.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3