Get the context of the sequence of other connectors (active) in the batch processing model

Similar Questions

• News station using the batch process model

  Hello

  I have a test sequence using a model of sequential processes and station information by using the following, I.

  RunState.Root.Locals.StationInfo.StationID

  RunState.Root.Locals.StationInfo.LoginName

  I create a new test sequence that uses the model of batch process - when I try to enter the information Station data using the syntax above I get the following error

  Name of variable or unknown property 'RunState.Root.Locals.StationInfo '.

  Can some advice please if I go to the wrong place when using a model of batch process?

  Thank you best regards &,.

  Shane.

  Batch and parallel models you can access this information using:

  RunState.Root.Parameters.ModelData.StationInfo

  -Doug

• Is it possible to get the RAID on model T?

  Is it possible to get the RAID on model T? For example if I have a RAID between the mSata SSD and HARD drive?

  T series does not support hardware RAID.

• I get the message "process host windows (Rundll32) has stopped working" & "Windows Explorer has stopped working".

  When I go to one of the three users on a Vista Home system, I get the message "process host windows (Rundll32) has stopped working" & "Windows Explorer has stopped working".

  I ran SFC and chkdsk for this user, (took 2 hours) and it is not fixed. Help, please?

  I ended seting up a new user for my wife, the user who is messed up. and I overcame everyting execpt his address book/contacts. She wants me to fix the first. Help, please.

  SpamLessSN

  Hello

   
   
  Are what contacts/address address you referring to?
  
  Perform the following steps in order to correct the damaged user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
   
   
  Hope this information helps.
   

• Dynamically set the Station process model

  I noticed in an existing position, to dynamically set the active process template, you use the Engine.StationOptions.StationModelSequenceFilePath property. (Search for "How do I dynamically (at runtime) the models?").

  But where do you put the statement that sets it?

  Thank you

  Oh yes I forgot to say in my last post

  You can make a file of sequence requires a specific process template.  So that no matter what the model of the station is on the sequence of file always use the designated model provide you.

  With the sequence file that requires that the new process model open go to Edition > properties file in sequence.  Under the Advanced tab, under model Options, select require a specific model.  You will then see a box of template file.  Navigate to your new template and select it.  Click OK to exit.

  Now, whenever this sequence file is opened, it will use this process template regardless of what is the model of the station.

  Hope this helps,

• method to set the station process model

  Hi ppl...

  I am building a custom in LabVIEW operator interface. I want to know the method to set the station process model.

  Thank you

  Hi ppl...

  I found the solution for this.

  We can use the Engine.StationOptions.StationModelSequenceFilePath property to set the model of the station.

  Thank you

• How to get the name of model of the physical network adapter

  I can see the template information for my network via vcenter card, but need help with registration this info for powercli.

  for example, that I'm looking for my request to have this output:
  "Broadcom Corporation NC370i Multifunction Gigabit Server adapt."

  Hello, jstroehmann-

  How about something like:

  ## get the .Net View objects for all of the host systemsGet-View -ViewType HostSystem -Property Name,Config.Network.Pnic,Hardware.PciDevice | %{    ## store pipeline variable for later use    $viewHost = $_    ## for each PhysicalNic on the host, output a bit of info    $viewHost.Config.Network.Pnic | Select @{n="HostName"; e={$viewHost.Name}},Device,MAC,@{n="NicDisplayName"; e={$oPNic = $_; ($viewHost.Hardware.PciDevice | ?{$_.Id -eq $oPNic.Pci}).DeviceName}}} | ft -auto
  

  He catches the .net visualize the object of all the HostSystems, and then displays some info like hostname, VMNic name, its MAC address, then the full name you mentioned.  You could, of course, something with the release other than send it to Format-Table.  How does do for you?

• How can I get the synchronization process to send an email to confirm the account?

  Synchronization program accepts no password and when I try to get the link sent by email is not good

  I just tried it with my account and I received the e-mail to reset very well after a few seconds. It shows a huge blue button with "Reset password". What do you see?
  If this is not the case, can you please send a screenshot showing the email that you got?

• Always get the host process for Windows Services has stopped working

  I read all responses answered messages ago. I did everything in the answers and always without result I always get the suggested message. Can anyone help with this? Here is the error log

  Signature of the problem
  Problem event name: APPCRASH
  Application name: svchost.exe
  Application version: 6.0.6001.18000
  Application timestamp: 47918b 89
  Fault Module name: ntdll.dll
  Fault Module Version: 6.0.6002.18327
  Timestamp of Module error: 4cb73436
  Exception code: c000071b
  Exception offset: 00088d 15
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: 0e02
  More information 2: b21b56b606e7544720668ce364087082
  3 more information: 0e02
  Additional information 4: b21b56b606e7544720668ce364087082

  Hello

  The SVCHOST. EXE is connected to many different processes and it is not uncommon to be asked to run a number of times.  As long as Svchost.exe is requested in the system32 folder is not the issue.

  Method 1

  In many cases this would happen because of security software installed on the computer.

  I suggest you disable the security software installed on the computer and check.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2

  If the previous step fails, then it may be due to infections of virus or malware on the computer, I would say that you scan and remove all infections from the computer and check.

  The scan below only works on the 32-bit version of Windows

  http://OneCare.live.com/site/en-us/default.htm

  You can use databases of Microsoft security to scan your computer

  http://www.Microsoft.com/security_essentials/

   

• How to get the logical processing Page to run?

  I'm a newbie struggling to overcome the learning curve. I created a very simple page that consists of an element (which do not refer to a database object) and a button. After the user enters a value and click on the button, I want to a PL/SQL code block always fire. I created a new anonymous PL/SQL block in the section of the process. See hierarchy of Application Builder below.
  
  The page definition
  Page processing
  Treatment
  Process
  
  The code is very simple.
  
  Start
  HTP.p ("in the custom code. The htp.p message');
  dbms_output.put_line (' in the custom code.) Dbms_output message');
  insert into PT_ERR_LOG (RUN_UNIT_ACTVTY_TXT) values ('in the custom code.");
  end;
  
  It was designed simply to let me know that the code is accessed. When I run the page, however, I'm not either of the messages from the code or y at - it a line written in PT_ERR_LOG (I created this table).
  
  The question is: "why isn't the enforcement code?
  
  In the area of process Point, to the point of process article is set to "On submit - after calculations" and Validations
  The enforcement process is defined on ' once per visit or when Reset.
  
  In the region of Conditions, Type of Condition is "point value / column in Expression 1 is NOT NULL.
  The value of Expression1 is: P6_PGNT_ID, which is the name of the lonely field on the page.
  
  I tried different combinations of values of the Apex in and around the page in the Page processing. What I am doing wrong?
  
  Thank you
  Kim

  In the Conditions region, Condition Type is set to "Value of Item / Column In Expression 1 Is NOT NULL".
  The value of Expression1 is :P6_PGNT_ID, which is the name of the lone field on the page.
  

  That's the problem. The value must not be P6_PGNT_ID: P6_PGNT_ID (remove the colon)

  P.S. Please configure a user name other than 952822.

  Robert
  http://apexjscss.blogspot.com

• Can not get the updated process / update registry denied

  I can not complete the update process, the system does not allow to install (unauthorized priviliege) to change the registry key is located in HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Impage file Excution\Acrobat.exe. I'm stuck and can't do anything to fix my installation of Acrobat ChineseT 10.1.13. Help, please!

  Hi simonw33448541,

  Please, try the following:

  1 try to repair Acrobat via Add/Remove programs in Control Panel. Then try to install the patch.

  2. If the option above didn't work, then you can use Download Adobe Reader and Acrobat cleaning - Adobe Labs tool to remove Acrobat completely from your system, then try to re - install Acrobat and then apply the latest patch.

  Kind regards

  Sandeep

• Please help with the batch processing of Javascript.

  I'm looking for batch processing a large number of PDF files.  I need to reduce the font size a bit concerned of form fields on all of these PDF files.  The name of the form fields are Texte8, Texte15, Texte16 and Texte17. I could also affect the size of the font to a smaller size.  What is the script I would use on the way to this topic?

  You can use something like this in a JavaScript Execute action:

  var fieldsToChange is ['Texte15', 'Texte16', 'Texte8', 'Texte17'];.

  for (var i in fieldsToChange) {}

  var f = this.getField (fieldsToChange [i]);

  If (! f) continue;

  f.textSize = 10;

  }

  Of course, you can change the size of font you want to any other value (use 0 if you want to set as "Auto").

• Best app for the batch processing of photos for the web?

  I would like to know what is the best application for batch processing photos for the web quickly and easily. I'm a web editor and often need to resize, compress, or crop several photos and would like a quick way to configure the basic parameters and processes for example 20 pictures at once. Basically, I'm looking for something with the ability to FastStone Photo Resizer (I'm on a Mac and cannot use FastStone). I remember an once suggested graphic designer LightRoom - would that be a good idea or Adobe has something else? Or maybe not Adobe at all?

  PhotoShop seems heavy for this purpose: it is ideal to make the photo woth that much at the time, but less large to do less with many pictures at once. I know that I can implement some sort of macro-thingie, but I would like to be able to quickly change settings such as the percentage of compression or the width in pixels.

  I don't need a lot of editing tools, mostly just work in pixels, resizing, compression or cropping and save for the web in .jpg and .png - and Mac.

  I hope someone here can guide me in the right direction.

  Hi eval

  I think the best thing for you is Adobe photoshop elements, cover in simple not expensive and all what you want

  Photo Editor software & tools | Adobe Photoshop Elements 14

  concerning

• Why can't I update my windows? and I get the host process crashing

  Well, I'm not able to update my Windows Vista Home premium and recently I get host process crashing error, I try to updated manually or through the update it gives error code 80072FE and the update was on 05/20/2010.

  Well, if I click on the link to update microsoft it cannot display web page gives, so any solution please help

  Hello CamboiJack,

  Thanks for your post.  Take a look at this article for a possible solution to your problem and let us know if it did or did not work for you.

  See you soon

• Out of sync a station with the model of batch process?

  Hello

  My project has 5 test stations are run in parallel. I decide to use the batch process model because I want that they start and stop together. Next to startup and shutdown, I have some part in the need for synchronization of the entire test sequence. But in 5 stations, I want a workstation without flash sync to these steps. I tried to use the commands synchronize with the precondition, but it looks like that other stations are waiting for that one I jump the sync. My other option uses rendervous with number of parallel thread total is - 1. I test it and it works. But I still want to know if I can use batch synchronize step or not because it offers synchronization of start and exit synchronization.

  Thank you!

  NTT says:

  Doug,

  Thanks for your reply.

  I want to have something happening parallel with other threads, but without effect by steps of synchronization batch. I have several workstations parallel to the Assembly line. They are sync due to the pick and place. But I want to have a process is functioning as the station manager who keep track of USE between the train station and other site conditions such as pressure, temperature.

  Thang

  As a general rule, the intent of the TestSockets in the process templates is that they will have a 1 to 1 with DUT match, taking your 5th corresponds to an object to measure? In other y 5 DUT tested at the same time? DUT often need things like logging database or report generation. Your 5th decision-making requires the generation of reports? If not maybe this 5th Jack is really more than one thread of utility and creating a new thread or performance during execution makes sense for her. If your 5th instead making it really fits under test DUT in parallel enitrely separately from others the DUT then maybe you should start up a new run for the socket using the sequential model and just run as your other shots are running with the model of batch processing.

  So, it really depends on what you use this 5th station/thread to find out which method would probably work better.

  Hope this helps,

  -Doug