Get the current Index of the Ring System

I need to know the index of the ring box that is currently displayed on the front panel during execution.

The ring box values do not necessarily correspond to their clues so I can just wire the ring box itself to property [] DisabledItems.

The way I'm going to get the index of the item "displayed" the control of the ring is as follows:

A reading in the strings [] property returns an array of strings of the 'Elements' of the order of the ring.

A reading in the RingtText.Text that returns the string value of the current item displayed in the control of the ring.

I use the search function to search in the array of strings to the current text, and it gives me the index of the current item displayed in the control of the ring.

Is there a way to get the index of the currently displayed index of the ring directly control?

In a Word, no.

the method that you use is the easiest.  If the srtings are very long, you could unbudle [channels] and property values and this table just to save a few (very minor) research paper.  Keep in mind, control system properties depend on the operating system

Tags: NI Software

Similar Questions

  • Cannot get the date system. My input format is %d %m %Y and the output is also a format "YYYYMMDD"?

    Hi all

    I'm using Labview 8.5.

    I'm trying to get the date system.

    I use the Format Date/time string in a "%Y %m %d' format.

    The PROBLEM is the Format Date/time string return "YYYYMMDD" only.

    Please see my attachment to see.

    Please help me with this, whenever I encounter this problem it force to reinstall labview program.

    Best thanks!


  • I get the message "system restore has been transformed to group policy. to turn on system restore contact your domain administrator"does that mean

    I get the message "system restore has been transformed to group policy. to turn on system restore contact your domain administrator"does that mean

    This means that the function of system restore has become disabled, possibly through a group policy.

    To re - activate:

    1. click on start, run and type regedit.exe, and then press enter

    2. navigate to the following key:

    HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore

    In the right pane:

    1 delete the value DisableConfig
    2 delete the value DisableSR
    3. exit the registry editor.
    4 reboot.

    In Windows XP Professional, you can accomplish the above by using Group Policy Editor.

    1. click on start, run and type GPEDIT. MSC
    2. navigate to this path:

    Computer configuration-> administrative templates-> system-> system restore

    3. set turn off unconfigured system restore
    4. set the disable configuration not configured
    5. exit the Group Policy Editor
    6 reset.

  • Get the color system of the focus/theme

    Hello

    I want to emphasize text in a CheckboxField with the highest development/point system color / theme. I know that I could get forefront and background easily colors in the graphics but y at - it a way to get the update/point system color climax / theme?

    Today I have this code but the rendering is ugly quiet (black & white):

    CheckboxField cbField = new CheckboxField("test", true) {    protected void paint(Graphics g) {        if(this.isFocus()) {          int fcolor = g.getColor();            int bcolor = g.getBackgroundColor();          g.setColor(fcolor);           g.fillRoundRect(0, 0, this.getWidth(), this.getHeight(), 8, 8);           g.setColor(bcolor);       }     super.paint(g);   }
    
    };add(cbField);
    

    Kind regards

    Sylvain.

    These colors are not currently exposed in the API set BlackBerry.

  • I have an Air of MacBk 2010 & I get the mssg "system is out of memory of the application", so it is impossible to open the Mail, Safari, etc.. But sometimes I can't. I deleted photos or videos for free space; no luck. What should do?

    I get the message "your system has wearied of the memory of the Application." So I can not open Mail, Safari, or any application.  However, I can periodically, the first thing in the morning, after I Shut Down & power up, not after a reboot.  I deleted a lot of photos and videos to free up space, but not luck.  IPhotos, I get the mssg. "cannot import pictures because not enough free space on the volume containing the iPhoto library."     The problem might be related to: 1 overheating, 2 PureVPN although I installed about 5 months ago and it was very good; 3. the MB Air was diverted (I'm worried that PureVPN may have something to do with it).  Or is this a sign that I need to get a new laptop?  Thanks for any help you can offer!

    release disk space and short-term memory are two different things. If your computer is running more disk space, it will have a negative effect on your system.

    Please post a report of etrecheck for further analysis.

    www.etrecheck.com

  • Equium A200 - how to get the operating system?

    Hi, my son has just been given an A200 and we put in place a new disk hard in, but we do not have the recovery disks. Anyone know how I could get my hands on copies or how to download the operating system and then is just a matter of inserting the disc?

    Tony

    Hey Buddy,

    First of all I must say that it of not possible to download the operating system. It s just preinstalled on your laptop and you can find it on Toshiba Recovery disk as well.

    If you don t have a recovery disc, you can order one from Toshiba but I m not 100% sure if it of possible old Equium A200. Just check the online store:
    https://backupmedia.Toshiba.EU/landing.aspx

    If you can t order it, ask a service provider authorized in your country. Maybe they have such a disc and can give you.

  • Pavilion 500-281: where to install a SSD and the best way to get the operating system on it

    I have a Pavilion nine 500-281 with Win 7. I bouight a SSD 128 GB to load the operating system on it.  Where can I get inside the chassis? It seem not to be berries of classical records. It came with an adapter with the screw plate, but it's not obvious where I was able to ride the thing!

    In addition, can I just run a restore to get the OS on the SSD drive, once I have installed?  I received instructions with the SSD for ADATA software copy an image of the disk, but all I want is the operating system.  I'm dying to start using my new computer, but I think I want to get the reader installed first before you make any changes that he.

    Hello

    Review the #8 message in this thread.  Not all models of the 500 - 2xx Pavilion are provisioned for the SSD in the location as shown.  In the indicated installation, an adapter plate was not necessary.

    Most SSD manufacturers have free software migration.  I suggest that you image the entire HD, all partitions even hidden partitions.  Some of the more recent migration software will allow you to exclude your data records.

  • My network controller is not displayed in Device Manager - Acer S7. How can I get the application system

    I have Acer S7 391 sytem 9413. The blush of network controller seems to have disappeared. It is not listed in Device Manager. I was hoping someone could advise how I can get the system to recognize it again.

    REDA

    Ethernet controller tree is empty?

    If so, the only thing you can try is to restore the factory deafult your OS (reinstall) and check to see if the network cards.

    If this is not the case, there is probably a hardware problem.

  • When I perform a net view on, I get the error system error 51 next. Windows cannot find the network path.

    Net 51 with a view system error

    I have two boxes of Windows XP that I login as administrator account. I was able to synchronize files, map network drives and can do a tracert to reach one of them.

    However, when I perform a net view on, I get the following error

    51 system error has occurred.

    Windows cannot find the network path. Make sure the network path is correct and the destination computer is not busy or turned off the coast. If Windows still can't find the network path, contact your network administrator.

    How to make this command work?

    Hello

    ·         Your computer is on a domain network?

    Follow the steps in troubleshooting this article and check if that helps:

    You cannot access shared files and folders or browse computers in the workgroup with Windows XP

    http://support.Microsoft.com/kb/318030

    See also this article that resembles the same error.

    Error when you try to access shared resources on a computer that is running Windows 2000 or Windows Server 2003: "53 system error has occurred" or "51 system error has occurred."

    http://support.Microsoft.com/kb/259878

  • How to get the Blackberry system infomation?

    Hi all.

    I want to get the following BB system infomation:

    String deviceModel;       example "BlackBerry Bold 9650"

    String OsVersion;          example "5.0.0".

    long memorySize;        the size of the RAM of BB
    long processorFre;     The BB processor frequency

    Can you tell me which functions can get them? Thank you!

    Please see the following for more information.

    http://www.BlackBerry.com/developers/docs/4.0.2api/NET/rim/device/API/system/deviceInfo.html

    http://supportforums.BlackBerry.com/T5/Java-development/how-can-i-get-the-total-RAM-size-in-BB-and-t...

    Best regards

    Albert Siu

  • Getting the error "System 5 error has occurred" during the startup of service SQL in Windows 7.

    I'm restarting SQL server, what I used to do via the following command line:

    net stop mssqlserver
    net start mssqlserver

    However, I am on a new Windows 7 machine and I get the following error when I try:

    net start mssqlserver
    System 5 error has occurred.

    Access is denied.

    My account is a member of the administrator group, and I can restart normally through the Services Control Panel.  I have tried to turn the UAC settings all the way down, but still this message.

    (This also fails if I try to use PowerShell.)

    What should I do to be able to restart the services via the command line?

    Thank you
    -Peter

    I had exactly the same problem:

    1. new installation of windows 7
    2. net start MSSQLSERVER fails with "Access denied" from the command window, but works at the start of Service Control Manager
    3. connected as a user of Directors of the Group - same account used for the automatic start
    4. I tried the above steps to register. They do not work.
    5. I tried to settle my UAC account at the lowest possible level, as recommended in another forum. It also did not work.
    I was amazed by the number of desperate people with similar problems - and apparently some resolutions there. I've used Windows 3.1, Windows NT, Windows Server 2003 and Windows XP a few years back and then switch to Mac OS X and Linux. Now, I'm hard to get used to this kind of problem again, (sigh) Windows.
    In any case, one of my colleagues just came and gave me an easy solution. He said that the problem is that your user 'administrator' is not ' administrator enough "-go figure. In fact, being in the Administrators group is not the same as being THE administrator account.
    1. create a shortcut to 'cmd.exe' on your desktop.
    2. click right on the shortcut and select "run as Administrator".
    3. in the command window that opens, "net start MSSQLSERVER" works
    Good. So now I can go on this restart-SQL-Server-when-it-decides-to-die script for our customer site. Another sad story of Microsoft...
  • WHERE CAN I GET THE OPERATING SYSTEM BOOTABLE MAC BOOK AIR

    I accidentally formatted my drive to start my MBA. Where can I get the os and bootable flash drive for my MBA job again?

    Thank you

    Charles

    Try to recover the OS X Internet.

    https://support.Apple.com/en-us/HT201314

    Press and hold key option + command + R keys at startup.

  • Tries to access an external hard drive get the error "system error 1130 has occurred."

    I have an old box with Windows XP Professional SP3 installed that I use as a file server. I installed a 2 TB external hard drive and set a couple of actions on it. Everything worked fine until 2 weeks ago when I lorsque je pouvais pouvais join is no longer to the actions of one other machines of the network: whenever I tried, I got:

    1130 system error has occurred.

    Not enough server storage is available to process this command.

    I installed the additional memory (now 2 GB), nothing helps.

    The really strange thing is: I can set and use actions on the C drive (a small disc 40 GB, only containing the operating system). but actions on the external drive D (the big disk) do not work.

    Someone has an idea?

    Hi levensnevel,

    Follow the steps to solve the problem:

    a. click Start, click run, type regedit and then click OK.

    b. look for, and then click the following registry subkey:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters

    c. click Edit, point to newand then click DWORD value.

    d. Type IRPStackSize, and then press ENTER to name the value.

    Note Type IRPStackSize exactly as it is displayed. The value name is case-sensitive.

    e. click Editand then click Edit.

    f. in the value data box, type the appropriate value for the network, and then click OK.

    If the problem persists after you complete this procedure, increase the value of IRPStackSize even more.

    Registry change warning

     

    Important Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    http://support.Microsoft.com/kb/322756/

  • How can I get the operating system?

    My computer broke down the month last because of the material. And I had hardware replaced, but I also lost the operating system. I bought my computer in Toronto last year, but I live in China now, so I transferred to China. The computer is still under warranty. But it will expire on January 4,2014. An agent in China told me that I could not order the CD for operating system just because the computer has not bought in China. Can someone help me with the problem?

    Raiden99

    Each Dell laptop comes with a recovery of the OS disk and even discs for re-installation of the drivers. If you have lost the CD, download Ubuntu Linux or if you have something to spend, you can buy Windows 7/8 on your choice. In order for the features, Windows 8 and Windows 7 compatibility.

    Unfortunately this is more true. All (not just Dell) computers sold today are supplied without drives. Tablets, ultralight aircraft and some laptops don't even have optical drives. If you must reinstall windows there are several options - using the recovery Partition or Images of system or to order discs from windows or usb thumb drive of the manufacturer, if you are still under warranty.

  • HP Photosmart C5180: get the ink system error message

    Hello: Get an error message 'system ink failure' on the screen, have installed new OEM cartridges

    Hello @crisgroup,

Maybe you are looking for