get the current mobile network operator

Similar Questions

• Can't get the Time Capsule network to see Airport Extreme?

  I have a network set up through my Time Capsule and I want to express with my Airport Extreme, the problem is that I can't get the network to see Airport Extreme - or rather, we'll see, but when I try to connect to it, it starts to connect, and then I get an unexpected error. I tried to restore both their factory settings and did a restore forced several times to the Airport Extreme, but nothing helped. I made sure to affect my IPv6 link-local only, I've even re-created my network several times (always with the Capsule of time as the main base station, but nothing seems working.

  Any ideas would be very useful.

  The Airport Extreme and time Capsule have been purchased during the last month, and I'm under OS10.11.1

  First of all, try to update your software El Capitan to the current version of operation... 10.11.4... which was supposed to solve some of the bugs that cause the message "unexpected error".

  If still no help, try using an iPhone or an iPad for the configuration.  After the back if you don't know how to proceed.

• An iPhone Unlocked verizon 7 will work with the T-Mobile network?

  I expect to buy an iPhone 7. I am currently using T-Mobile, but I'll probably use CDMA-based network when I spend my winter in China. Anyone know if an iPhone Unlocked verizon 7 will support the T-Mobile network? Thank you very much

  If you look at the following:

  http://www.Apple.com/iPhone/LTE/

  iPhone 7 seems to have 2 different CDMA models:

  model A1660 (CDMA) iPhone 7

  model A1661 (CDMA) iPhone 7 more

  and 2 different models of GSM:

  Model A1778 iPhone 7

  Model A1784 iPhone 7 more

  My guess is that the models of Verizon (CDMA) do not work on the T-Mobile GSM network. Data connection does not work at least LTE. Not sure about the voice. T-Mobile and AT & T models may support data LTE in both networks.

• How to get the type of network in Blackberry 10 Webworks 1.0

  Hello

  I am developing web applications and using connection plugin to get the type of network used.

  I've added the id of the required functionality in the file config.xml as follows:

  function id = "blackberry.connection".

  Now when you click on buuton, I call the function below:

  function currentConnectionType(){
      alert("1111111111");
      var connection = blackberry.connection;
      alert("222222"+blackberry.connection.CELL_3G);
  
      var connType = blackberry.connection.currentConnectionType();
  
      alert("Current con Type : "+connType);
  }
  

  In the code above curretCoonectionType is not called.

  Please help me correct where I am doing wrong. Or please let me know is there another way or sample code for the Type of network being used

  Thanks in advance

  It seems that the type property, you should get the current connection type:
  BlackBerry.Connection.type

  https://developer.BlackBerry.com/HTML5/APIs/gold/BlackBerry.connection.html#.type

  You can also save to connectionchange headphones to monitor changes in the type.

• How can I get the current paragraph?

  I want to get the current paragraph where the insertion point is.

  How can I do this in FDK?

  Ch,

  I can answer some of these questions, but if you have decided that this thread is replied, please give credit to Mike.

  About the audit for a FO_Pgf object, you shouldn't have that. I think that there is some obscure cases where F_ApiGetTextRange() gives you an object that is not a paragraph... I forgot exactly but I think it has to with a text graphic subject line or something like that. I could be wrong. In any case, if you have a stream of regular text with an insertion point, you will get a paragraph object.

  This line will abort the operation if any text is selected. Do you really want that?

  If (insertionPoint.beg.objId! = insertionPoint.end.objId)

  This line will abort the operation if several paragraphs are selected. Do you really want that? Without this verification, you will always get the text of the first selected paragraph.

  If (insertionPoint.beg.offset! = insertionPoint.end.offset)

  Otherwise, the code looks OK to me, at least regarding the FDK calls. You have problems with him?

  Russ

• Flex TextInput to get the current position of the cursor

  TextInput component in how to get the current position of the cursor? Because I want to record a loss of focus on the location of TextInput dynamically add text.

  Here:RichEditableText is a part of the skin of the class spark TextInput and is what is doing all the text in the editing/rendering of work. If you need to make all text advanced operations, they need to go through the property here. Because it is a part of the skin, you need to make sure that is not null before doing anything on this subject.

  Fixed typo: it is the property here is, not textInput

• I reinstalled Firefox Desktop, I downloaded my favorites of Carbonite, how can I get the current Firefox to accept?

  See above

  I reinstalled Firefox Desktop, I downloaded my favorites of Carbonite, how can I get the current Firefox to accept?

  You do backup your bookmark as a .json file?

  Restoration of bookmark

  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• I want to get the current music, I have on my iPod out of it and start again. How can I do this?

  I want to get the current music, I have on my iPod out of it and start again. How can I do this?

  Open iTunes, plug in the iPod, select what you want to be on your iPod, sync.

• Why do I get the message 'a network error occurred during the processing of your order'?  I was able to print an album without problem about a month ago

  I am trying to print a photo book, but get the message "a network error occurred during the processing of your order.  Please check your network connection and try again.  I had no problem with the printing of a book about a month ago.

  Start in Safe Mode, Mac OS x: Safe Mode bootand try to order from there.

  Don't forget to check out the book before ordering this Apple; Get an overview of a project on paper in Photos, iPhoto or Aperture to avoid problems - Apple Support. Save the PDF to be compared with the printed version when coming out.

  

• Get the current value of the menu a cluster ring

  Hello

  I am trying to program a bunch of rings of menu to use the same options and disable the option even in the other rings of menu if it has already been chosen. It works essentially as is at the moment, but it shows each button by using a 'deactivated' option because I'm turning off the option even in the buttons that have this value. I did it using a loop knot and property and [] DisabledItems en mass. Now, I want to go to the iteration of the loop for the menu ring which already has this value.

  To do this however, I want to get the current numeric value of the ring of menu and an array of search values. If the value of menu rings appear in this table, then I want to move to the current iteration of the loop. The problem I have is that when I try to use a property node and type the property value, instead of giving me a long 32 output, it gives me the so-called 'Variant', which I have not seen before. I'm not sure how to find a table and see if the value I have is in this table. "Search table" seems just an index to be returned, I think that I want a Boolean or something. I'm also not sure how to skip an iteration of the loop (although I imagine it won't be too difficult to understand mine, I hope).

  I apologize if this is very obvious, or if my message is not clear. I started using LabVIEW, a few weeks ago and I'm still learning. I have included a picture of my Subvi downstairs.

  Thank you
  Nathan

  Variant of data allows to convert the variant to a numeric type (whatever representation you need).

  Search D 1 table returns-1 if the element was not found.  If you just compare the index with a greater or equal to zero and the result will be if the element was found in the table.

• Get the current value of a control of the ring

  

  I have a control of the ring that has the following values. See attacment. I need to get the current value of this one and use it as input for another function, but First I would like to get the current value and save ina text file. I tried this

  if (event == EVENT_LEFT_CLICK_UP) || (event == EVENT_LEFT_CLICK_DOWN)
  {
      int p;
      GetCtrlVal (panelHandle, PANEL_RINGSLIDE_1, &p);
      FILE *OutFile = fopen("C:\\Users\\Student\\Desktop\\ringtest.txt","w");
      fprintf(OutFile,p);
      fclose(OutFile);
  
  }
  

  I need to get the current value of the ring (& p) to write to the file ringtest.txt.

  Also, I need to use this value (& p) as another entry in the same program.

  IE value of & p must be used in

  b = c * 5; where c is the value of the current & p.

  Can any 1 help?

  You're right: EVENT_LEFT_CLICK_DOWN is not a valid event for the CVI. Valid events are listed in the userint.h file, and are the only events that can be caught in the trap in a point of order. On the other hand, you're assuption on EVENT_VAL_CHANGED is correct: you can trap forget the EVENT_CLICK_UP event.

  According to the second question, looking at the definition for fprintf you must pass a string format as the second parameter to the function, then the value to write to the file. In your case, the correct syntax is:

  fprintf (OutFile, "%d", p);

• problem to get the current date in qml

  Hello world

  I'm trying to get the current date in c ++ and qml and I used the class QDate, but it still has some problems:

  Code:

  =====================================================

  QDate * nowdate = new QDate;
  QDeclarativePropertyMap * nowdateMap = new QDeclarativePropertyMap;
  nowdateMap-> insert ("date", QVariant (nowdate-> currentDate()));
  QML-> setContextProperty ("nowdateMap", nowdateMap);

  ===========================================================

  After setting the nowdateMap, I'm able to get the date in the application, but the format is really weird, I did not use QDatetime, but the restult of shows like ' 2013-1 - 3 T 00: 00:00 ", how can I get rid of the final"T00:00:00 "? or is there a better way to get the current date?

  Thank you

  QDate nowdate is QDate::currentDate();.

  QString nowdatestring = nowdate.toString (); / / to get the date string format, you can define the shape of toString(), you can //search it
  QDeclarativePropertyMap * nowdateMap = new QDeclarativePropertyMap;
  nowdateMap-> insert ("date", QVariant (QString (nowdatestring)));
  QML-> setContextProperty ("nowdateMap", nowdateMap);

  then in the file qml, using nowdateMap.date will do.

• Get the current Message of the new screen open message context

  When you open the application again [email] message you can use a ViewListenerExtended to get the current context of Message... but the user every interaction with the fields of composition creates a new Message object if you hold is no longer a valid reference (he gets cloned). By changes, I mean using the menu items to add/remove fields, typing in a topic, etc. Does anyone know how to get the context of new/current Message used while the demand again message is open and has been updated? MessageListener does not work for Messages being changed in the application of the new message.

  Update: the subject of the message is not be cloned, UI updates not the model.

• How to get the current timestamp in C++ to the BB10 project

  Please help me how to get the current timestamp in C++. Thanks for your help!

  Following your suggestion,

  QTime is only for a day.  http://developer.BlackBerry.com/Cascades/reference/QTime.html#details

  I found "QDateTime" of references of the API: http://developer.blackberry.com/cascades/reference/qdatetime.html#toTime_t

  QDateTime = now QDateTime::currentDateTime();
  timestamp long = now.toTime_t ();

  But I got an error. I searched but no results are clear:

  -variable 'QDateTime now' initializer has but
  incomplete type
  -type incomplete "QDateTime" used in the nested name
  specifier of

  I am a newbie. So thank you for your help

• How to get the current wording of the BlackBerry device with the BlackBerry App?

  Hello!

  I'm new to BlackBerry,

  Can u tell me pls, how to get the current language of the device using the program...

  PLS, suggest me...

  Locale.getDefaultForSystem () will give you the regional settings currently selected.