Get the error code 0x80070426 and a black screen when recording in Windows Vista

Similar Questions

• Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  Ideas: I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  • Pragrams you have problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Computer stops responding with a black screen when you start Windows Vista

  Computer ceases to respond with a black screen when I run Vista, this happen right after the installation of updates. original title: computer stops responding with a black screen when you start Windows XP__

  If you think that Windows updates are loaded:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MS - MVP - Elephant Boy computers - don't panic!

• Try to install the fix it and get the error code 2503 and 2502

  Try to install the printer and fix this program. Get error 2503 and 2502 codes.

  Hello

  · What is the number and model of the printer you are trying to install?

  · Who solve this are you referring to?

  · You receive an error message with the error code?

  Delete the temporary files and folders on the computer and check if it helps. You can follow the procedure:

  a. click on start

  b. click on run

  (c) in the Open box type %temp%

  d. remove all files and folders in the location.

• Get the error code 31 this device is not working properly because Windows cannot load the drivers required for this device.

  Original title: WAN miniport driver

  A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I use windows 8 in my sony vaio
  MODEL - SVE15123CNW

  Hi Praveen,

  Perform the steps suggested by Nirmal S from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/i-get-an-error-code-31-in-Device-Manager/3364d05a-af20-4f6d-8597-b4b9f6a74b60

  Answer please if you have any questions.

• I can't get my computer up to date. I get the error code 8007010B and the 643 error code.

  Because my computer did an update, it's be about 2 months or more. He has like 12 updates to do and everytime I try to update, 8007010b error code comes up. I tried to do the thing of .NET Framework, because I have read a few replies and they said that I had to delete and downloaded again because that was supposed to give me the problem. It wasn't her, I already deleted my .NET framework and got a new. I downloaded like 3 different version because it is said the response that I have to do. It did not work. Help, please! what the heck is 8007010b! Help!

  is there another way to solve my problem update?... I might as well just upg thdate my computer to windows 7 if I don't want to reinstall stuff. Who would fix the problem?

  No, the only way to solve your problem is to format your hard drive and do a 'clean' of Windows installation.

  No, go to Win7 will not correct this problem.

  Because you will need to format the disk in any way, you can buy a copy of Win7 Full edition (not updated one or level upgrade Express edition) and install Win7 it. Full Win7 Edition will cost around US $100 more than Win7 Upgrade edition or an Anytime Upgrade to Win7.

  You have yourself to blame: have you uninstalled McAfee free trial until it has expired and then download / run the McAfee Consumer products removal tool before installing the freebie from Comcast, you wouldn't be in this situation. Bet let you yet once, never happen there?

  Wish I had better news for you. In & out.

• Get the error Code: 0xc000000d and your PC needs to be repaired.

  * Original title: Error Code: 0xc000000d

  Hello, I have Windows 8, and at random, I had projected blue and the computer reset and now I have this message on my computer when I try to start it

  Your PC needs to be repaired

  The Boot Configuration data file is missing some required information

  File: \Boot\BCD
  Error code: 0xc000000d

  You will need to use the tools of recovery on your support of instillation. f you do not have any media (such as a disc or usb device) please contact your system administrator device

  I can't pass this screen please help. The only disc that came with this computer is a reinstallation DVD.

  Hello

  Please follow the steps mentioned here and see if they help you:

  http://www.kapilarya.com/fix-the-boot-configuration-data-file-is-missing-some-required-information

  Hope this helps, good luck :)

• Get the error code: 0 X 81000037 while safeguarding my hard drive Windows 7.

  Original title: Error code: 0 X 81000037

  I've never had a success to the top of my hard drive in Windows 7 and after 3 years, I think it's time to figure out why. I get error code 0 X 81000037.

  Windows backup failed trying to read from the shadow copy on one of the volumes to back up. Please check logs in case any relevant errors.

  When I entered the code on the MS site he gave me instructions on how to locate my junctions from the command prompt:

  DIR /S OF RANDOM

  Then he gives me instructions on how to remove a mounted volume reparse point, but there are 2 things wrong with that.

  1. they do not tell you how to determine what junction to remove and

  2. they don't tell you how to get to the window 'Properties of sample Volume mounted' that you're supposed to do in.

  Here is the URL see for yourself. https://support.Microsoft.com/en-us/KB/973455#bookmark-workaroundissue12

  The event log said: "If the volume of the source or the destination is on a disk (of course, it is on a disk would it be what on?). My C: drive I save is internal my drive and my drive G: I am saving is a 500 GB external WD.) Run CHKDSK/R, and try the operation again. »

  Anyway I'll run CHKDSK/R on both drives and, hopefully, by then someone will post a reply as to where I can find this mystery mounted Volume sample fenΩtre "PropriΘtΘs" who speak the incomplete evidence and perhaps a clue as to which junction I'm supposed to delete.

  Yes - if you happen to have a drive WD their software is quite reliable and usable, and it's free.

  For those who aren't, here's what seems to be a good alternative:

  If you want a truly refreshing experience of backup image at least consider the free version of Macrium Reflect:

  http://www.Macrium.com/reflectfree.aspx

  Think about what you are going to do one day if your hard drive failures or your system does not start, and you must rely on the backup/restore of Microsoft program and help you could get these committed Microsoft alleged 'experts' (not the same as volunteers in the community who are the real experts).

  Then imagine the process of recovering your files or your entire system using software and tools to a company that specializes in backup/restore or using the tools provided by Microsoft.  Which company do you think knows more about how things like backup/restore and system recovery should work?

  Imagine the support you would get from a company that specializes in the backup/restore software and that's all they do all day long.  You've seen the kind of support you get from Microsoft?  Without success, didn't work, etc.

  Of course, you will get more features in the wages of Macrium version, but even the free version is superior to everything that Microsoft has to offer (backup/restore is not their business).

  Install and test the free version.  If you don't like it, uninstall it.

  Vroom!

• I have a black screen when turn my Windows Vista.

  Original title: BRO. THANKS AMEN

  I have another computer running Windows Vista, most of the time that it remains lit.  However; When put on now, I get a black screen with a start-up noise struggling, but nothing happens. I tried in vain to keep clickii key ng F11 to do a system restore, but still nothing is happening.

  I have another computer running Windows Vista, most of the time that it remains lit.  However; When put on now, I get a black screen with a start-up noise struggling, but nothing happens. I tried in vain to keep clicking on the F11 key to do a system restore, but still nothing happens.

  Hello

  When you try to start your computer do you have a Splash Screen (manufacturer or Logo MotherBoard, Acer, Dell, etc.) and a single "beep", what is normal?

  I'm checking to see if your problem is; in the motherboard or hard drive.

  Follow this information:

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And see if the hard drive tools help you.

  "7 free disk hard test Programs.

  http://pcsupport.about.com/od/toolsofthetrade/TP/tophddiag.htm

  ____________________________

  And let us know your brand of computer that I can then know you which key you should lobby to perform a recovery to factory settings if the hardware is OK.

  See you soon.

• I get the error code 204 and cannot install the creative cloud. Need help!

  Currently, I'm trying to install the creative cloud but error: 204 keeps popping up stating «It seems to be a problem of access to a critical file for download...» »

  Can someone help me?

  Thank you

  For this a little late but I just had this problem and it was my malware program which was causing the problem. Just turn it off and it works perfectly.

• Get the error message "connection Wireless not found" after re-installation of Windows vista

  Original title: I reinstalled just the OS (Vista) on a Dell laptop and I get a message saying that not found wireless

  I'm rebvuilding a laptop Dell Inspiron 1525 using the original disks. When I try to connect to the internet, I get a message saying that there is no responsible wireless device.

  Hello

   
  Update the network drivers and check if the problem persists.
   
  http://support.dell.com/support/downloads/driverslist.aspx?os=WLH&catid=-1&dateid=-1&impid=-1&osl=EN&typeid=-1&formatid=-1&servicetag=&SystemID=INS_PNT_PM_1525&hidos=WW1&hidlang=EN&TabIndex=&scanSupported=True&scanConsent=False
   
  Hope that helps.

• Setup KB967044 error; I get the error code 646 in automatic and manual update update fails so

  I tried to install KB967044 for Microsoft Works 9. Like others, I get the error code 646 for the automatic update. I tried to manually install, but installation requires the CD of Microsoft Works. Now, Works has been installed at the factory, and I do not think that the CD that came with the computer. In any case, I was unable to find such a CD. Disable my firewall has not changed the problem. I use Vista.
  Thank you for your help.

  Contact the manufacturer of your PC to get the drives concerned etc..

  If the update requires the CD and then the CD. TaurArian [MVP] 2005-2010 - Update Services

• I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

  I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

  See this previous thread on the problem: http://www.google.com/search?hl=en&safe=off&rls=com.microsoft: en - US & q = + site: social.technet.microsoft.com + 8024200d & ei = hkchS4O6M9HolAfh8viLCg & a = X & oi = forum_cluster & resnum = 1 & ct = more results, & ved = 0CA0QrQIwAA

  Unlimited installation and compatibility for Vista SP1 support is available free of charge from April 2008, through June 30, 2009.  This support now will cost $59 us $ (or more) per incident.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I try to install the update of security for Microsoft Office System 2007 (KB972581), but if failed and I get the error code Code 57A__

  I try to install the update of security for Microsoft Office System 2007 (KB972581), but if failed and I get the error code Code 57A

  I have install the 2007 Microsoft Office Suite Service Pack 2

  I bet that if you check the size of the file that has been downloaded it will be probably very small, indicating that it was not downloaded correctly.

  I don't think you have another computer at hand, or a friend with a USB key which may be able to download and copy it for you?  Maybe burn it to a CD or something.

  I could download it and save it to my desktop so I am confident that it is not a problem with the link itself or the file is available for download with success.

  I know this isn't a very good suggestion, but the only other option would be to challenge support and see if a technician can take control of your machine and see if they can solve the problem of internet explore.

  If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!