Get the error code 28 when using my LG U8120

Similar Questions

• I get the error code 8007005 when downloading updated 951847

  I get the error code 8007005 when downloading update 951847. It produces about 60-70% of fact. I tried a few times and still nothing. I have an Acer Aspire M5620 running Windows Vista hope first Edition, SP1. I use the automatic updates. I tried following the instructions on changing permissions, but I do not have the same path as in the answers here. He said that this is an important security update. Any help appreciated.
  I tried to use Mr. FixIt and he could not run the error code giving 2838

  Hello Redbiker_co,

  Method 1: -.
  Please download Windows Installer CleanUp utility from the link, below
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  After installation, run the tools by clicking Start--> Programs--> Windows Clean up.
  On the inside of the window, you will see different installed versions of the .NET Framework. You should choose & Remove only that versions of the .NET Framework, that fails to deploy every time-for which you receive error code. (i.e. you should only remove .NET Framework 3.5 & its application solutions packs)

  Then, restart your computer and manually install the following updates in the order
  (1) package Microsoft .NET Framework 3.5 from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4e35-B531-508D977D32A6&displaylang=en

  (2) Microsoft .NET Framework 3.5 Service Pack 1 from the following link:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ab99342f-5d1a-413D-8319-81da479ab0d7&displaylang=en

  (3) now, download the KB951847 patch manually.

  Method 2: -.
  Error code: 8007005 means of problems with permissions. Please perform the procedure below

  Run cmd.exe with administrative previlliges (right click on this file as an administrator)
  and type: secedit/configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose

  Now restart your computer & try to visit the Web site updated Microsoft or try to download the file manually from the link below

  If no help verify the steps using the link below
  http://update.Microsoft.com/microsoftupdate/v6/showarticle.aspx?articleid=13&ln=en

  [If this post can help solve your problem, click on the button 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  --

• I get the error code 646 when I try to install windows updates.

  I get the error code 646 when I try to install windows updates. I have Windows Vista Home Premium. I disabled my firewall and I still get the error code 646.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I get the error code 80246008 when you try to update.

  I get the error code 80246008 when you try to update. I tried everything to repair windows at the attempt of essential security analysis of windows. Yet its does not work and I can install updates or download microsoft windows. can anyone help?

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80246008

  This should help.

• I get the error code 80070020 when trying to install (KB2507618).

  I have Vista Home Premium. I get the error code 80070020 when trying to install (KB2507618).

  I tried all the troubleshooting steps below and still no luck. I installed some other updates, today, August 19, 2011.

  Do I need to KB2507618 that came out in April of this year, or is it is replaced by an other update and or cumulative update?

  • Summary
  • Symptoms of the problem
  • CAUSE
  • Methods to solve the problem
    • Method 1: Restart your computer and install updates
    • Method 2: Start the computer in safe mode with networking support and install updates
      • Windows 2000, Windows XP or Windows Server 2003
      • Windows Vista, Windows Server 2008, or Windows 7
  • Advanced Troubleshooting
    • Method 3: Perform a clean boot of the computer and then install the update
      • Windows 2000, Windows XP or Windows Server 2003
      • Windows Vista, Windows Server 2008, or Windows 7
    • Method 4: Temporarily disable spyware and antivirus software
    • Method 5: Temporarily disable firewalls
      • Disable Windows Firewall in Windows 2000, Windows XP and Windows Server 2003
      • Turn off the firewall in Windows Vista, in Windows Server 2008, or in Windows 7

  Read the little free support in the Article:
  http://support.Microsoft.com/kb/2507618

• I get the error code 80070005 when you download Windows updates

  Original title : I use Windows 7, Vista Home Premium on a laptop. I can't download updates and get the error code 80070005

  When you try to update, I get the error code 80070005. System: 64-bit, service pack 2, M-6880 of Gateway computer memory 4.00 GB

  Hello

  1. what day you're talking about?

  2. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Step 1: Put the computer to boot.

  Click on the link below

  http://support.Microsoft.com/kb/929135

  NOTE: after you install the update properly, restore the computer to start as usual (see step 7 link mentioned above)

  Step 2: Download and install updates from Microsoft Download Center manually.

  a. visit the Microsoft Download Web site, type the number of "KB" in the search box and press ENTER.

  b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

  c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

  d. When you are prompted, click open to install the update.

  Microsoft Download Center

  http://www.Microsoft.com/download/en/default.aspx

  Method 2:

  Run the Microsoft Fixit from the link below.

  http://support.Microsoft.com/mats/windows_update/

  Method 3:

  Reset components from Windows Update from the link below.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/971058

  Method 4:

  Follow the steps from the link below.

  http://support.Microsoft.com/kb/2509997

• Get the error code 646 when you try to download the update of April 10

  I am trying to install an update in April 10,2012 and the code646 of error appears and it let me download the update? What should I do?

  Hello

  1. what day you're talking about?

  2. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  You receive the error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/2258121

• I get the error code 81 when I try to install creative cloud.  Help!

  I was a member creative cloud for more than a year.  I tried to download lightroom and nothing happened so I tried to uninstall the creative cloud.  Now, I try to reinstall and get the error code 81. I deleted every installer that I can find on my computer.  Help!

  uninstall, clean (use the CC cleaning tool to solve installation problems |) CC, CS3 - CS6) and reinstall.

• I also get the error code 80070005 when you try to use Windows Update to check for the updates

  I get this error code as soon as I try to check updates. It does not even say there are updates tells me to enable updates, but when I try it gives the code. I used Microsoft Fix and now it says everything is fixed and ok but it is not. So now what?

  Hello

  1. what Microsoft fixit did you run?
  2. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003

  Note: When you perform a virus scan Malware, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

• I get the error code 6046 when I try and install updates KB973593, KB973704, KB975960 and KB974661

  I get error code 6046 when I try and install updates KB973593, KB973704, KB975960 and KB974661 and am invited to re - download the updates (which aren't yet.) Help, please.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Why do I get the error code 2349 when installing itunes 10

  Im getting error code 2349 when trying to install itunes 10... It has something to do with Windows Installer? I can't find a way to fix the installation program. And I cannot upgrade to a newer version of Setup with validate them my copy of windows, but when I try to validate, it won't let me. My copy is valid, what kinda stuck...

  Run it see if it fix it

• I get the error code 5 when I try to start the Windows Firewall

  Original title: Windows 7 x 64 firewall won't start, tried everything

  Hi, ive tried enough what was described in the first 10 pages google search, but I cannot get rid of the known problem of firewalls

  For me, this is the error code 5.

  As soon as I try to start it manually, it says cannot be started.... error code 5.
  I did a system win7 files repair, I did a reset of network, I tried about 30 different commands to display information about the firewall service, ive checked the firewall authority loading driver, I gave permission to complete firewall of all registry directories described, ive created entirely new firewall rules 1:1 to the default ones, ive checked other 'ordinary' process runs in the firewall service and and and.

  NOTHING helped me.

  Others facing this problem actually get another error for the first code after a few solutions, they also face the "error code 5.
  Oh yes, I also tried the microsoft firewall tool.
  He says theres a problem with the firewall, but can not solve.

  I never had no infection or OneCare / 3rd Personal Firewall running.

  And because I can't deal with that firewall, I also can not use transferred ports - which is terrible bad since im was the owner of a local game server.
  But that happened in ive faced the problem as it was half a year ago. And I can't be solved without format my drive.

  Because you guys are part of Microsoft personnel - and has got the possibility to contact the developers - why cant you just create a firewall package with latest updates that crushes real files/settings in order to solve problems that are found by your own tool?

  Its a shame, I hope that you can offer me new solution :(

  -You are using a third-party firewall software?
  At no time.

  Was there the recent changes on your computer before the show?
  No, not at the time the problem occurred, also not 1-2 weeks before.

  Method 1:
  Returns the error Code 5, as I indicated in my problem

  Method 2:
  Tried 2 - 3 times yesterday, , everything including the Microsoft Tool to automatically fix problems.

  Method 3:
  I've done a complete check-up and recover system, no modified files files have been found.

  Also, the batch file to start/restar services:
  SC config start = auto MpsSvc - success
  SC config start = auto KeyIso - success
  BFE sc config = auto start - success
  SC config start = auto FwcAgent - fail ' [SC] OpenService error 1060 - service is not installed.

  net stop MpsSvc - Service not started
  net start MpsSvc - cannot be started - error Code 5

  the rest - success, but still, the firewall service does not.

  Seems that the firewall service or part of it gots uninstalled something?
  Perhaps in the case of update?

  Also I can't find no "FwcAgent" file in my system drive while showing the system hidden files and folders.

  I guess that's NORMAL given that verification of files windows did not find any changes.
  Theres no light at the end? Really?

  Moreover, the hotline also could not help (and you get his terrible btw, managed a total noob). The suggestions here are much "deeper", still nothing worked again.

  --------------------------------------------->
  EDIT:
  Looking around the means how to re - install the firewall component windows I found another unofficial repair tool.

  It fits quite all associated in any way with the security settings and firewall components, as it recreates all the rules and rights of dirs and registry keys.

  And what should I write - it WORKED.
  Let me share with you: http://www.tweaking.com/index.php?/content/page/repair_windows_firewall.html

  AND YES:
  Someone should stick this tool in front of microsoft developers, but the hard way.
  How is it, some hobby programmers can create these simple tools that beat anything from microsoft developers?

  I hope that my solution works for the many thousand other ppl that I found on the net - who could not solve their problem (even) with the firewall in vista/windows7.

  Please mark this topic as "BOLD" and possible GREEN :-)
  Thanks again for your help, John Rubdy!

• Why am I getting the error Code: 821 when I try to upgrade to Service Pack 1 for Vista Home Basic?

  The last update my computer (Vista Home Basic) tried to download and install is the Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86... According to Windows Update. The problem is, it always ends up telling me that the installation failed due to the error Code 821. I found nothing covering this error code on the Microsoft support page. Why am I and how to fix it?

  Hello MadHatter106,

  The link below contains several options that you can try for your problem of .NET.  I would first try the repair facility. Then the uninstall option.

  http://blogs.msdn.com/astebner/archive/2009/03/04/9459067.aspx

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get the error code 0x800706BE when trying to update to service pack 3 installation did not finish. and I don't have the installation CD

  I get the error code0x800706BE when trying to modernize the service pack 3 installation did not finish. and I do not have the original installation disc

  Go here and download the complete file of the OFFXPSP3 edition: http://www.microsoft.com/en-us/download/details.aspx?id=23334

  This page scroll down and read this paragraph: to install SP3 without the original Office XP CD

• Get the error code 0x80070005 when you try to save

  Original title: error codes

  I tried to backup my pc to an external hard drive when I received an error message: 0x80070005. I studied this error and found a fix for the "microsoft help. While downloading zip files, I got another code: 40?
  I am running Windows Vista and Microsoft Security Essentials.

  Hi Simon,.

  You receive the error code 0 x 80070005 during backup.

  Click on the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Vista-Home-backup-0x80070005/4558119a-73d6-4C18-9a95-8ae484678586

  Hope this information helps.