Get the error during the deployment of I am

Similar Questions

• I get this error during the windows WindowsUpdate_8024A000 updates

  I get this error while the vista sp2 update is there any solution for this? WindowsUpdate_8024A000

  Hello
  The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

  I would like for you to perform general troubleshooting steps for Windows Update.
  Method 1: Try to run the fix - it of the article mentioned below, if you not him have not yet tried.
  The problem with Microsoft Windows Update is not working:
  http://support.Microsoft.com/mats/windows_update/
  Method 2: Scan run SFC. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.
  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow
  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833
  Method 3: Check the hard disk for errors:
  See: http://windows.microsoft.com/en-US/windows-vista/Check-your-hard-disk-for-errors
  Note: Check hard drive for errors will check the bad sectors on the hard drive and repairs. During this process, there is a chance of losing the data in these sectors. Please back up the data before performing this step.
  I hope this helps.

• I get an error during the in-app purchase

  Hello! I am Huy. The Japan student. I get an error when buying in-App error "your purchase could not completed, support contact Itunes Support at www.apple.com/support/itunes/ww/.

  I'm afraid to have to do what the message - says contact Apple directly.

  We are just other users like you, and we can not help with this problem.

• Get 364 error during the installation of Windows Update.

  Original title: I get an error code 364 on my windows vista computer. It will not download new update please help! I want to solve this problem without having to pay anything. Thank you

  whenever I shut my computer down it trys to download updates from the window. but then, when I turn on back says error364. Help, please!

  Hi Vicky,

  We need after the details on your part to help you better.

  (1) what is the exact full error message?

  (2) do you have any third-party security software or antivirus installed on your computer?

  Check the updates installed properly on your computer. Double-click the update that shows unsuccessful, and write us with error codes. You can follow the steps in the link below.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-in/Windows-Vista/see-which-Windows-updates-are-installed

  You can also provide us with the details of the event viewer. Follow the steps below.

  Open event viewer

  http://Windows.Microsoft.com/en-in/Windows-Vista/open-Event-Viewer

  You could deal with this question for various reasons. Windows update fails to install if there is a conflict with a third-party security software installed on your computer. Follow the troubleshooting steps below.

  Step 1: Temporarily disable all security software. 

   

  Temporarily disable anti-virus software or any other security software temporarily on your computer.

  Warning: security software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2: How to reset the Windows Update components?

   

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.

  http://Windows.Microsoft.com/en-in/Windows-Vista/back-up-the-registry

  You can see the steps in the link below.

  Problems with installing updates

   

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

  Write to us at the State of the question. We will be happy to help you come.

• Error during application deployment - an error occurred to deployment Cordova plugins.

  I get the below error when deploying the application of MAF.

  [18: 23:30] "org.apache.cordova.network" Installation - information for android [18: 23:30] error Code: INTERNAL_ERROR [18: 23:30] error during the processing of the action! Attempt to return...

  [18: 23:30] oracle.maf.mafhelper.api.MafHelperException: oracle.maf.mafhelper.api.MafHelperException: java.lang.Exception

  [18: 23:30] at oracle.maf.mafhelper.internal.utils.MafHelperInternalUtilities.runProcess (unknown Source)

  [18: 23:30] at oracle.maf.mafhelper.internal.utils.MafHelperInternalUtilities.executeCmd (unknown Source)

  [18: 23:30] at oracle.maf.mafhelper.internal.utils.MafHelperInternalUtilities.addPlugin (unknown Source)

  [18: 23:30] at oracle.maf.mafhelper.internal.utils.MafHelperInternalUtilities.deploy (unknown Source)

  [18: 23:30] at oracle.maf.mafhelper.MafHelperMain.main (unknown Source)

  [18: 23:30] caused by: oracle.maf.mafhelper.api.MafHelperException: java.lang.Exception

  [18: 23:30]... 5 more

  [18: 23:30] caused by: java.lang.Exception

  [18: 23:30] to oracle.maf.mafhelper.api.MafHelperException. < init >(Unknown Source)

  [18: 23:30]... 5 more

  [18: 23:30] Server Android Debug bridge closure...

  [18: 23:30] deployment cancelled

  [18: 23:31] - incomplete deployment.

  [18: 23:31] an error occurred the Cordova plugins deployment. (oracle.adfmf.framework.dt.deploy.android.deployers.plugins.AndroidPluginDeployer)

  Help, please.

  Thank you and best regards,

  Paul Davis

  Hi all

  I solved this problem.

  This can happen to the below reasons:

  1.) location of the android SDK is too long.

  Solution: Put SDK in a path runs like: C:\Android\SDK

  Set the same in places tools-preferences-MAF-Android SDK.

  2.) location of the application (file .jws) is too long.

  Solution: When creating application MAF choose a short path, say: C:\ADF\Application

  The names of project application/3.) contains spaces. for example:(Sample Application.jws)

  Solution: Please do not include a space for Application for the name of the project.

  I hope this helps...

  Thank you best regards &,.

  Paul Davis

• Sims 3 gets CRC error during installation

  Hello, I would like to know how to get sims 3 to work on my laptop. I downloaded it but it happens with a crc error during installation. I have read that this can be caused when your computer needs to defragment if...

  To try to solve this problem, I downloaded a cleaning and defragmentation program. I cleaned my computer and tried to Defrag. I then discovered that I could not defragment if I had vista sp2. I downloaded sp2 eventually with the help of an advisor. There were a few flaws that prevented me to download it myself. Now I have sp2, that he will not yet be defragmentation without gel. So I can not even download the sims 3! Its very frustrating and I was wondering if you could help me to sort this please?

  Hi, I have the same error when I tried to install it on my pc.

  What I did:

  1. run the cleanup utility on the Local C drive windows disk

  2. restart your computer.

  3 run ccleaner , then click on "cleaner".

  Then, got to 'Register' then click Scan then click Fix all issues...

  4. prior to installing the Sims 3 game, clean installation disk using a disk cleaner and a microfibre cloth. Make sure the disk is dry until you load it in your DVD player.

  5. once the installation is complete, restart the computer. Then, refer to steps 1-4.

• get compilation errors during migration of weblogic7.0 to 9.2

  I get compilation errors for my request during the migration of weblogic7.0 to weblogic9.2. These errors are specific to the weblogic.servlet.FileServlet, weblogic.servlet.WebAppServletContext, and weblogic. Security-related packages.
  In the code of the application itself is called Fileservlet classes. WebAppServletContext calls the getWar() method.
  I found these classes and methods are not api weblogic9.2 and weblogic7.0 api as well.
  
  But it is having compiled without error in weblogic7.0 and it's errors in weblogic9.2.
  
  Can anyone suggest sort of like any changes of the configuration necessary for it to fix these errors of compilation.

  This information can be provided by the support the Oracle customer... Because the missing methods belongs to 'Internal API to WebLogic' and no official docs are available from outside the world of oracle because of the internal API.

  Thank you
  Jay SenSharma

• Defective JavaScript and cannot be removed or reinstalled, get «fatal error during installation»

  As a result of an error indicating that javascript has not been installed (Internet options/security/scripting is set correctly) I tried to remove the Javascript (before a new installation) but which have resulted in a message: fatal error during installation (probably installshield). I'm so stuck without Javascript and cannot update or delete it.

  I have version 6 update 27 Javascript, Windows XP and Internet explorer 8

  Any help will be greatly appreciated

  Barry

  Hello

  You can run solve this link and try to uninstall java and check if the problem persists:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• Equium A100-147: I get an error during the recovery procedure

  Hi again,

  I had trouble with my equium a100-147.
  I tried a restore, but the disc is scratched so I phoned in ESL and it snet me a new recovery image.

  I tried the new recovery disk and am now errors when I boot the disk.

  error is

  "internal error crc file: \WINDOWS\$NtUninstallKB895200$\msdtctm.dl.

  any suggestions are welcome. get really annoyed with my machine as my warranty expired only one month

  Thank you

  Hmm... I studied a bit and it looks a bit like a malfunction of the partition.
  It would be desirable to boot from the original CD of Microsoft XP and to start the repair console.
  Then you could try these various commands which help to repair the boot manager, repair errors, locate bad sectors and recover readable information.

  -fixboot
  -fixmbr
  -bootcfg /rebuild
  -chkdsk /r

  If this does not help, you should erase the entire partitions and must format the HARD drive in NTFS file system. Then access the BIOS and set it to the default value.
  Once this procedure tries to start again on the new recovery CD!

  Good bye

• Why I am getting this error during video playback: Adobe SiteCatalyst error: did not find module media

  When you try to view the video on several websites, the following error message is displayed when the video should play: Adobe SiteCatalyst error:
  Found no media Module

  in this case probably the blur addon was to block the loading of content that is necessary to operate the video player...

• Error of full deployment in ATG with JBOSS Server 10.0.3.

  Hi all
  
  I'm getting following error during full deployment in ATG 10.0.3 (OS: Linux) with the JBOSS server.
  
  
  ERROR [ProductCatalog_production] SQL statement failed: [++ SQLDelete ++]
  DELETE FROM dcs_folder WHERE folder_id =?
  -Settings-
  p [1] = {pd: id} fld330005 (atg.adapter.gsa.SingleValueGSAId)
  [- SQLDelete-]
  
  
  Can you please answer to this problem!
  
  Thank you and best regards,
  Murail.Ch
  
  Published by: Murali.Chitturi on March 11, 2013 21:33

  My problem is solved.

  Until now the same error, but full deployment is finished and to SIR promotions are displayed. But I do not know why it displays this error.

  I did reinstall the ATG products, drop all schemas and set up again using the CIM ATG.

  Avant cela, j'ai augmenté options jvm JBoss à 1024m et permsize 512 m("JAVA_OPTS=-Xms1024m-Xmx1024m-XX:MaxPermSize=512m-Dorg.jboss.resolver.warning=true-Dsun.rmi.dgc.client.gcInterval=3600000-Dsun.rmi.dgc.server.gcInterval=3600000-Dsun.lang.ClassLoader.allowArraySyntax=true")

  Changed the value of 300 to 1,800 transaction time-out in the file of transaction-jboss - beans.xml , 1800 for instances of Production and publication.

  Thank you all...

  Kind regards
  R. Srinivasa

• Error during the deployment using Ant Scripts

  Hello
  
  I use the Ant scripts for projects on the Enterprise BPM deployment.
  
  However, every time I try the project deployment deployment takes a long time (about 15-20 min.) followed by the following error message:
  
  
  means: Java heap space
  
  This error message is followed by several lines explaining the same error.
  
  
  Kindly help me with the solution or the necessary changes I have to do in order to get the deployed project.
  
  
  PS: When I try to deploy some of the examples given, they all work very well.

  try to increase a lot of ants
  Export ANT_OPTS = "- Xms256m - Xmx256m" (ksh/bash)
  Define ANT_OPTS = "- Xms256m - Xmx256m" (Windows)

  HTH
  Peter

  Edited by: user12083480 the 23.10.2009 11:45

• The deployment of the BCC error

  Hello
  
  I get below error during deployment to the staging area. Help, please.
  
  
  NullpointerException
  at atg.deployment.adapter.DistributedDeploymentAdapter.createSwitchDeploymentData(DistributedDeploymentAdapter.java:658)
  at atg.deployment.adapter.DistributedDeploymentAdapter.deployData(DistributedDeploymentAdapter.java:2028)
  at atg.deployment.adapter.DistributedDeploymentAdapter.transferData(DistributedDeploymentAdapter.java:300)
  at atg.deployment.server.Deployment.run(Deployment.java:1687)
  at java.lang.Thread.run(Thread.java:595)
  
  
  Concerning
  Gopi

  Hey Gopi,

  Not sure whether the version ATG to coincide track battery, but I think it might be due to the repository on the BCC instance target resolve to null. Basically, something like 'ProductCatalog_staging' does not exist. Maybe you don't understand - stagingandprod layer when creating the instance if what is happening with a repository of out-of-box? Or you set up [MyCustomerRepository] _staging all for a customized?

  Thank you.

  --
  Nick Glover
  Oracle Support for the ATG products

• "Get an error" "disable the native windows power management" when installing the APC's PowerChute Software.

  Original title: native Windows power management?

  I'm trying to activate my ups (APC Back-UPS1500) on my new xp windows desktop pc. APC told me to install the PowerChute Software and drivers. Installation stops with a statement of "disable the native windows power management. I can't understand how/where to do.

  Hi Patrick,

  Welcome to the Microsoft Community and thanks for posting the question. According to the description, you get an error during the installation of software provided by APC.

  Try these steps and check:

  Method 1:

  I suggest to create a system restore point before you perform the steps listed in method 2:

  Sometimes, a new program can make your computer behaves unpredictably, and uninstalling the program does not help. Windows XP provides a feature called that can help the system restore. You can use system restore to select a time when your computer is working as you wish.

  Visit this link and try the steps to create a system restore point:

  How to set a system restore point in Windows XP

  http://support.Microsoft.com/kb/948247

  Method 2:

  Can the service of Windows power. Try:

  1. click Start and click Run.

  2. type Services.msc in the box and click on enter.

  3. scroll down until you find the power, right-click on it and select Properties.

  4. in the menu drop-down select Diasbled. OK and quit Services.

  5. now try to install the PowerChute Software and check.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• Error during the update of information in the form-more details Personla people

  Hi all
  IAM getting an error during the update of the information in the form of people, Personla other details FDF.
  
  Error such as:
  
  APP-BY - 289974:There has been a mistake of treating this individual's encountered error ' ORA - 20001:HZ_STNC_SQL_EXCEP:N, PROC.sync_Person, N, ERROR. ORA - 25153:Temporary Tablespace is empty, N, OOP, 1265890', which took place in the per_htrca_merge_tca_person to step10 procedure.
  Please contact your support represntative.
  
  
  Thank you-
  Sowmya

  Hello

  Please see Metalink belw Notes-

  ID 727573.1
  ID 395136.1
  [ID 278422.1
  ID 290228.1

  HTH
  Gerard

• I dowloand appealed game Fear 3 I used kuaiwan for dowloand but I finished dowloand I want to play, but I get the 0xc0000417

  original title: how I want to play has 0xc0000417 I dowloand appealed game Fear 3 I used kuaiwan for dowloand but I finished dowloand I want to play, but I get the 0xc0000417

  Hello

  1. what version of Windows is installed on the computer?

  2. have you installed the game?

  3. If it is properly installed, or you get an error during installation?

  I suggest you to give us more information about the issue, so that we can help you better.

  It will be useful.