Get the error message 'connection of diagnosis problem' when to access the Ebay.ca site

Similar Questions

• Installation of the Photoshot 13 elements. error message: "this is a problem when extracting the files. Check the amount of space available on your computer and the rights to write to the destination folder. I have 1.38 TB of free space and total control

  I try to install photoshop elements 13, that I bought and downloaded from Amazon. When I try to install it I get the following error message: "this is a problem when extracting the files. Check the amount of space available on your computer and the rights to write to the destination folder. I administrar 1.38 TB of free space and total control.

  Charles please do not remove the installation files in the Program Files directory.  I recommend to extract the installation to your downloads folder or your desktop files.  Once installation files are extracted, you can then run the installation program to install Photoshop elements 13.

• When I try to install my software, I get an error message that "Windows Installer could not be accessed".

  Issue of Windows install

  I just bought a HP Photosmart printer and I am trying to install the software on my computer. (OS is Windows Vista.) When I try to install my software, I get an error message that "Windows Installer could not be accessed". I ran "msconfig" and found that the Modual from Windows Installer status is stopped. How should I proceed?

  Thank you, Jeanne Vecere

  You could try to go to the MICROSOFT website, go to KNOWLAGE database and in the search bar, try the search for WINDOWS INSTALLER. Look for any version that is newer than the one you have. If this fails, try searching on GOOGLE. You can also try to do an update to WINDOWS VISTA.

  IF YOU ARE RUNNING 64-BIT WINDOWS, MAKE SURE YOU PRINTER WORKS WITH 64-BIT.

• I get an error message, "there is a problem starting C:Users\ (my name!) \Appdata\local\temp\uacavi,dll ".

  Hello

  whenever I start my pc, I get this error message:

  There is a problem starting C:Users\ (my name!) \Appdata\local\temp\uacavi,dll

  I recently purchased RegCure Pro for fix my registry and its still not fixig the problem.

  Help, please

  Original title error message.

  Thank you

  Well, you shouldn't have wasted your money on a registry cleaner - they are dangerous to use if you don't know what exactly is the cleaning of your registry - and if it is safe to remove the discovered or not registry keys.

  OK, so just fix it-

  Press Windows key + R > type msconfig in the box run > Enter. In the System Configuration window, select the Startup tab.

  Now, uncheck an entry > OK and restart. If the error message is gone, leave it as it is. If the error message still appears, open System Configuration > start again tab. Now check the entry you previously unchecked and uncheck another. You do this to know what entry causes the error.

  Make work easier, you should not try unchecking and check all entries beginning with the following words in their names.

  Microsoft, Adobe, Intel, (your company produces antivirus developer), Java, Synaptics and (the manufacturer of your computer - HP, Dell, Sony, MSI or anything else).

• I just started getting this error message: there is a problem starting c:\Users\username\AppData\Local\Temp\stppvxe\starvfn\wow.dll

  I just started getting this error message:

  RundDLL

  "There is a problem starting

  c:\Users\username\AppData\Local\Temp\stppvxe\starvfn\wow.dll ".

  the specified module could not be found

  The computer seems to work ok and selecting ok will leave the error, and allow the user to continue.  Any suggestions on what this could be and how get rid of?

  Thank you

  Danielle

  Original title: starvfn\wow.dll

  Hello

  Thanks for posting in the Microsoft Community.

  The description of the issue, you get wow.dll at startup. I'll be happy to help you on this question.

  1. don't you make changes to the computer before the show?
  2. when exactly you get the error message?

  This problem can occur if the waw.dll file is corrupted.

  Method 1: I would say that you run SFC scan. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2: I suggest you perform the clean boot and remove the program that is causing the problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow how to reset the computer to start as usual after a repair by article KB929135 clean boot to reset the computer in normal mode.

  Method 3: This problem can also occur if the computer is affected by the virus.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you perform online virus scanyou will lose some data which are affected by the virus. Microsoft is not responsible for the loss of this data.

  Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

• Why do I get windows error message direct Library closed unexpectedly when I close the program?

  When I use windows live photo gallery to display an image and then close the program I get Windows Live messages Library closed unexpectedly.

  Submit all Live queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• I get an error message "Macromedia Shockwave (TM) Player when I try to install sold out game flight unlimited 3_ does that mean?

  try to install flight unlimited 3; I get the error message; Macromedia Shockwave (TM) Player. What does that mean?

  Moved from Vista to install, upgrade and activate Forum.

  And threads merged.

  Duplicate deleted

  Shockwave player is of macromedia.com

  They also have 'flash player' you have probably installed...

• Computer not starting and I get an error message

  After that I ran the microsoft of what free security scan it found some files that were Trojan horses that he couldn't get rid of, so I deleted manually solve them some of the problems that I had. The end of the analysis told me to restart my computer so I did. But now it will not start and I get an error message that says: "a problem has been detected and windows has shut down to prevent damage to your computer. Then he told me to check the virus and to ensure that it is configured correctly and run the CHKDSK command to check the alteration of the hard disk and restart my computer. How am I supposed to do all this if I can't even start up? I tried to go into safe mode, but the same screen comes up. He gives this technical information at the end of the message. STOP: 0x0000007B (0xF79E4524, 0xC0000034, 0x00000000, 0x00000000) if someone could help me it would be so awesome thank you.

  Hello

  Check the disk for malware:

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  ===================================================================

  You can also save the data and re-install Windows 7. The hard drive can be set
  another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
  allows you to copy the data to removable media such as CD, DVD or other USB drives.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  ===================================================================

  For slightly more:

  BCCode: 7B 0x0000007B

  INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Cause

  Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.

  This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)

  Resolution

  This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.

  Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.

  Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.

  Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.

  Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

  In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.

  Warning   If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.

  BCCode: 7B 0x0000007B<-- read="" this="">
  * 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-

  =================================================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs.
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How to create a Windows 7 - free system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I get an error message when I want to print from my laptop on my Lexmart printer wireless. It is said "problems connecting to the printer.

  original title: devmgmt msc

  I get an error message when I want to print from my laptop on my Lexmart printer wireless. It says "connection to the printer problems" sometimes he just complained and then prints, sometimes it won't print at all. I hate the thing!

  Hello

  I suggest you to see link below and check if it helps.

  http://www.Lexmark.fr/publications/pdfs/810/winug/Eng/UGnetwk.html

  I suggest also you see the steps from the article below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• I get this error message every time I try to open Outlook Express: your server unexpectedly terminated the connection.

  I get this error message whenever I try to open Outlook Express:
  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.mail.yahoo.com', server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 465, secure (SSL): Yes, error number: 0x800CCC0F

  How can I solve this?

  original title: Outlook Express error

  Does OE open at all, or you get this error after opening?

  Check your mail at Yahoo.com and see which messages are still on the server that you have not received. The first online can be very large and cannot be downloaded. If you find such a message, read it and delete it online.

  In addition, you must disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for many AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck e-mail scanning when the option is available.  You will probably have to do it.
  

• After the connection to my computer today and to go to YouTube, I get this error message on my screen: "Microsoft Visual C++ Runtime Library error - failure of the Assertion.

  After the connection to my computer today and to go to Youtube, I get this error message on my screen.

  The assertion failed!

  Program:...
  File: common\npn_gate.ccp
  Online: 267

  Expression: pPluginShim

  I try to press abandonment and try again but nothing happen.

  Hi Shadwik,

  Thanks for the reply.
  I did as you said. It has been effective. But only to play the first video clip on youtube. With the next video, the error appeared again. I looked at the programs and saw the customer to be automatically updated to 11.3 flash...
  After that I tried to read a music video by realplajer and who has a problem too. by seeking out them in true originator, I founded there a conflict with the 1.3 flash payer... and disabling the Web download & recording of Realplayer was the solution finally.
  After that my PC works fine.

• When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• T400: Error Message - there was a problem connecting to the TPM secure

  Hello

  I am a new user of ThinkPad. I just got my T400 a week ago, and I'm a fan of him immediately. But there's this little thing that really bothers me. The second day I used my laptop, I got this error message: "There was a problem connecting to the module of TPM (safety device) on this computer", and I got this message since that date, every time I turn on my laptop.  What it means? And how do I get rid of this error message? Thank you!

  Moderator Note: Type + error message added to the line object for clarity.

  go into the bios and check if the TPM secure is enabled or disabled in the BIOS. Make sure it's on. If the problem persists then call Lenovo, could be a hardware problem.

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  I need help
  Kind regards

  Thank you very much!

  To host successfully a FSX session what follows is the key enabling

  my client (s) to join my host FSX session!

  "Players Maximum (for a shared together plane 2) leave the locations reserved for friends to 0 set."

  6122 6112 UDP port translation FSX multiplayer traffic of my remote 2 wire gateway to my router Linksys Wireless N DMZ to access game FSX host...

  Only a single router in my configuration of the DMZ, the external network to the router,

  in this case, the 2 wires, had defined port forwarding.

  Am now enjoying Gamespy (R.I.P.) FSX free hosting for my MP FSX sessions via direct connection.

  5 high to the author!