Get the error message 'error 101 net disconnect' when to access Web sites

Similar Questions

• Dell laptop 14zxps with windows 7... I get the error code 43 problem when I connect my USB on my laptop

  Hey, I have a laptop of dell 14zxps with windows 7... I get the error code 43 problem when I connect my USB to my laptop... n this laptop is designed in a way where the battery cant b removed... Please help me on how my USB is started again here... Thank you :D

  Try this.

  http://support.Microsoft.com/kb/817900

• I get the following message: windows service install could not be accessed. Anyone know what I can do?

  I can't download anything to my cmptr more.  I get the following message: windows service install could not be accessed.  Anyone know what I can do?

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  I suggest you follow the steps below:

  Method 1:

  Check if the installer of windows services are running, follow the steps below:

  a. Click Start, type Services.msc and press ENTER.

  b. double-click Windows Installer.

  c. set the start type for Windows Installer to manual.

  d. Click Start to start the service.

  e. click OK.

  Method 2:

  Re-record an installer of windows follow the steps below:

  a. click Start, click run and then type cmd in the dialog box, and then click command prompt.

  b. at the command prompt, type the following and press ENTER after each line:

  c. to unregister the type install windows MSIExec /Unregister.

  d. to re-register MSIExec/regserverwindows installer type.

  e. try to download.

  Method 3:

  If the above step fails the utility auditor system files to run it and check the missing or corrupt files follow the steps outlined in the article below:

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• I keep getting "the certificate for this server is invalid" for all SSL web sites.

  Since the upgrade to Mac OS Sierra I get certificate errors on my Mac Pro to the end of 2013.  It will work fine right after a reboot, but then it will start refusing to open all web sites that use SSL.  In this case until I restart, then it kinda good.

  I thought it was some kind of problem caused by the application of update after update to the Member, then I've completely erased from the hard drive and reinstalled Sierra fresh. And now the issue of the certificate is back.

  Anyone else having issues like this?  Anyone know of a fix?

  Do you have a third party anti virus or other applications that claim to protect, manage, clean, etc. from your computer? If so, uninstall them. Do you get the same message when you are using another browser?

• get the error (0 x 808005) when you try to change the backup settings

  need to change backup settings I get an error (0 x 808005) how can I take care of this problem

  Hello conniealvarez,

  When you change the settings for a return to the top, when you get this message?  Here is a link to change the settings on a return to the top.

  Save:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-your-mind-at-ease-back-up-your-files-now

  Since suggest that the reverse will run successfully, where you store to the top (DVD, hard drive)?  Were you able to change the date/time of back ups for the last time with this computer?

  Thank you

  James

• I get the error code 80200010 & 8020000E when I update my windows 7, 64 bit

  The update I get error for is called: "update for windows Silverlight (KB979202).

  • Windows Update failed to install
  • Code errors, I get are 80200010 & 8020000E
  • My pc is new and did not any changes that it
  • I did no pricing yet, waiting for your comments
  • Validated my windows to make sure that it works and it is

  You will find help in the forum: http://forums.silverlight.net/forums/13.aspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Get the error Code 'WindowsUpdate_8E5E03FB' 'WindowsUpdates_dt000' when you try to download recommended update using the automatic settings 'updates '.

  I just noticed today, pronouncing the 'permission' to Windows to download and install, it is recommended to update it tries to download the update, hit 11% downloaded and then shows the dialog window "update failed", asking me to "Try Again", etc. etc. I googled the error exactly as stated above, and it takes to me an article 'A' answer the Question which recommends a bunch of steps that I have not the first clue of what they mean, or what they will do. I used the option "Microsoft Fix It" after a search, in an attempt to reset the Windows Update settings, but I don't know if it's working or not, although clearly it did nothing to help in the installation of this download. By examining the log of the updates installed, I am able to receive and install other updates, however, it is with a update I see several attempts in the last days to install, and each of them ended in failure.

  When we look at the site of Question answer, other than to check to ensure the update is, indeed, the Automatic value, that it is in accordance with the instructions given that's where I get lost. The following suggestion is something to do with the "C:\windows\system32\catroot" folder, I've never even heard of, and am more than a little reluctant to go messing around with this stuff. Can any that illuminate what he done, or point me in a direction to a response that is written in 'English' for those of us without much experience of computer programming? Live is support available for all what is the cause? Any suggestions much appreciated!

  See you soon!

  Ken, "Medic95."

  See if KB970430 will install after you uninstall IOBit Security 360 & reboot. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Get the error (0 x 8078119) when you try to create a system image in Windows 7

  Original title: shadow copy volume
  Hello

  I currently have problems with creating a system image, because it comes back with the error (0 x 8078119) now I know it's, it's to do with the lack of disk space of 100 MB (startup disk or something like that) but with mine I have 62% of free space that is 63 MB available space for me (Please note the 100 MB drive for me is 102 mb)
  so I was wondering if anyone can help, because I had a virus before and ended up losing everything, that I don't really want to breed

  Hi Jugganourt,

  Please see the troubleshooting following thanks Divya R:

  Step 1: Check if the shadow copy Volume service is running.

  1. Click Start and type services.msc in the search box

  2. double-click on the Volume Shadow Copy Service.

  If you receive a Configuration Manager message, click OK.

  3. in the Startup Type list, clickAutomatic, and then click OK.

  4 services nearby.

  5 restart the computer.

  Step 2: Open Event Viewer to check the exact error message:

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Check out this link to open the event viewer:

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  Open event viewer and navigate to the following location: applications and services Logs\Microsoft\Windows\WindowsBackup\ActionCenter.

  Step 3: You can also generate a log file by following the instructions below and send us the details.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  1. Click Start-> Run-> type regedit.exe.

  2. navigate to HKEY_LOCAL_MACHINE NT\CurrentVersion\Asr, create a new key called LogFileSetting.

  3. under LogFileSetting, create a new DWORD value called EnableLogging.
  Right click on this value, click on edit and then type 00000001 (hexadecimal)
  or 1 (decimal).

  4. under LogFileSetting, create a new string value called LogPathName.
  Right click on this value, click on edit and then enter C:\asr.log.

  5. then, to reproduce the error. You should have a file called asr.log in c:\

  6 copy the content and after us.

  Thank you!

• When I try to install creative cloud I get the error code 204. When I try to install adobe type manager tells me that I need creative cloud

  Help, please. everything was going fine until I got the notice of updated creative cloud. I had just updated CC2014 Monday without problem.

  If Windows,

  Check if the LAN settings is set to detect automatically?

  Temporarily disable anti-virus and firewall and check.

  Check if there is Adobe entries in the Hosts file.

  If you use Wireless / Wifi Connection, if possible try with wired Ethernet connection.

  ------------------------------------------------------------------------------------------ ---------------------------

  Only,.

  If all of the steps fails, you can install using the direct installation file:

  N ° 1)

  Click on the below link, Sign In and open Photoshop Elements download link.

  Do not close the page, just keep it open.

  https://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements

  Note: * If we do not keep the page of items in Photoshop, we will have access denied error message when file downloading install direct.

  Then click on the link below and download the installer directly mentioned in step 2.

  He's going to start directly from the installation process.
  

  Step 2)

  http://trials2.Adobe.com/AdobeProducts/KCCC/1/Win32/ACCCx3_2_0_129.zip

  Extract the Zip first, then run the Setup.exe file.

• I get the error code 80070005 when you download Windows updates

  Original title : I use Windows 7, Vista Home Premium on a laptop. I can't download updates and get the error code 80070005

  When you try to update, I get the error code 80070005. System: 64-bit, service pack 2, M-6880 of Gateway computer memory 4.00 GB

  Hello

  1. what day you're talking about?

  2. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Step 1: Put the computer to boot.

  Click on the link below

  http://support.Microsoft.com/kb/929135

  NOTE: after you install the update properly, restore the computer to start as usual (see step 7 link mentioned above)

  Step 2: Download and install updates from Microsoft Download Center manually.

  a. visit the Microsoft Download Web site, type the number of "KB" in the search box and press ENTER.

  b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

  c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

  d. When you are prompted, click open to install the update.

  Microsoft Download Center

  http://www.Microsoft.com/download/en/default.aspx

  Method 2:

  Run the Microsoft Fixit from the link below.

  http://support.Microsoft.com/mats/windows_update/

  Method 3:

  Reset components from Windows Update from the link below.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/971058

  Method 4:

  Follow the steps from the link below.

  http://support.Microsoft.com/kb/2509997

• Error 0 x 80070570 when you access my flash drive using windows 7

  I get an error 0 x 80070570 when you access my flash drive using windows 7, but the same flash drive works perfectly on two other PC's with Windows XP. It's frustrating because I need to backup and transfer files.

  Hello
   
  1 you get an error message with this error code?
  2. is it a problem with this particular flash drive only or all flash drives?
  
  Let us run the check disk utility.
  Here's how:
  a. open the computer by clicking the Start button, click computer.
  b. click the drive you want to check, and then click Properties.
  c. click on the Tools tab and then, under error-checking, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.
  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
  d. Click Start.
   
  Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• Unable to connect to facebook, error 101 (net::ERR_CONNECTION_RESET): the connection was reset

  Original title: Facebook error 101 (net::ERR_CONNECTION_RESET): the connection was reset

  I only get this problem when I try to log into facebook.

  I assumed it was mcafee blocks but do not seem to be the problem.
  I cleared my cache and temporary files.
  I ran a diagnostic - found nothing tool.
  Concerning

  Hello

  1 did you do changes on the computer before the show?

  2 does happen with all browsers?

   

  Method 1: Reset Internet Explorer settings

  Use this method if you are using Internet Explorer

  See the following site:

  How to reset Internet Explorer settings

  http://support.microsoft.com/kb/923737.

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

   

  Method 2: Reset the Internet Protocol

  See the following site:

  How to reset the Protocol Internet (TCP/IP)

  http://support.microsoft.com/kb/299357.

   

  Method 3: Reinstall the network cards

  a. click Start, type devmgmt.msc in the start search box and press enter

  b. right click on the device, then click on uninstall. Restart the computer and allow the driver to install.

   

• I want to add a printer, but get the error message "print spooler service does not work."

  I can't print from my computer.  This has happened with no other visible defects on the computer or the printer.

  When I use the printer in case of problem, and hit the 'add printer' link, I get the error message "print spooler service is not."

  "I did a search on"print spooler"but got no result

  Duane

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  If the suggestions below do not resolve your problem, after back and don't forget to include the following information:

  • The version of Windows you have, including service pack (start > run > winver > OK)
  • The brand and model of printer you have (includes the manufacturer, model and model number, as in HP Deskjet 6800)
  • How the printer is connected to the computer (parallel, USB, network, wireless, etc.).
  • It happened just before this symptom started
  • What application antivirus you have and if your subscription is up to date and has been maintained continuously
  • The full text of the error messages related to printing, without paraphrasing

  
  

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Whenever I do a right click on a file I get the error message that Windows Explorer has a problem and needs to close

  original title: problems of files

  Whenever I do a right click on a file I get the error message that Windows Explorer has a problem and needs to close.

  Sometimes, the problem is caused by a third-party extension. ShellExView can be useful to see what shell extensions have been introduced in the Explorer. Lire read on this topic, then scroll down to download the x 86 (32-bit) or x 64 (64 - bit) version here near http://www.nirsoft.net/utils/shexview.html

  When you run it, click the column of company for sequence entries in alphabetical order. Suppose Microsoft entries are in good faith and focus on others. Is something listed that is useless or unknown? If so, select it and click the Red (on top left) task to turn it off. You can find more easy to disable them all and then reactivate (green area) one at a time and Explorer of execution until the culprit is found.