Get the error message, this button cannot be used with Windows Anytime Upgrade

Similar Questions

• Try to remove a CD image file, get the error message "this action cannot be completed because the file is open in another program.

  I am trying to remove a file from CD image (.img) of my office

  When I try to put it in the bin I get the message

  "The action cannot be completed because the file is open in another program close the file, and then try again"

  First, I checked the obvious things like if the .img file was mounted in a virtual drive - it isn't so I then used LockHunter to find which application is using the file so I can close by the Task Manager.

  Unfortunately LockHunter told me that the file is used by 'System' - which cannot be closed through the TM.

  Any help?

  The problem is that the program that allows you to mount the image always uses the image.  In my case I used the magical disc. Go to the start menu find the magic disk or folder folder, there should be an option to uninstall the magic disc. I tried UN-installing conrtol add and remove programs but it wouldn't let me. You can also click on computer in Start menu and see if the file you want to remove is always mounted (appears as a CD image). In this case that you can click the eject disc hit.

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• How can I download updates for CS5 Extended when I get the error message "this serial number is not for a product calling it"?

  How can I download updates for CS5 Extended when I get the error message "this serial number is not for a product calling it"?

  Updates are not related to series numbers, so you must have done something compared to try to use an upgrade rather than an update.  Adobe not revise older versions of their software to adapt to the latest hardware/devices.  They create/sell new versions of their software for it.  If you subscribe to the Cloud at some point you shouldn't have a problem with the software becomes obsolete.

• "Lightroom_5_LS11_mac_5_7.dmg" for Mac update my Lightroom 5.6 (build 974614) but when I try to open it I get the error message "Lightroom_5_LS11_mac_5_7.dmg cannot open the disk image is not recognized. I am running OS 10 of Yosemite

  I downloaded "Lightroom_5_LS11_mac_5_7.dmg" for Mac that allows to update my Lightroom 5.6 (build 974614), but when I try to open it I get the error message "Lightroom_5_LS11_mac_5_7.dmg cannot open the disk image is not recognized. I am running Yosemite OS 10.10 on a Macbook Pro (retina, 13 inches, end 2012 with 2.9 GHz Intel Core i7 processor).

  Vk2mh looks that the download was not complete or corrupt.  When you download the update from?  Have you tried to download it again?

• Help! All programs will not work. I get the error message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  When I try to run a program (Internet Explorer, Firefox, CCleaner, etc..) I get the same message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  I can't find the "Set Associations control panel" and am not sure that he would go if I could find it, and if it work I do not know I know what to do. Help!

  Should I re - publish so that else soeone looks like?

  If you wish.
  Make sure you add a line right at the beginning: you are reposting because we could not have solved other fold it.

  Alternatively, you wait for the next person coming.

  The choice is yours, although generally you would be advised to stay put and wait. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Error 907: This connection cannot be used with the VZAccess Manager

  original title: error message appear on my screen

  I get this error message appear on my screen every two seconds:
  "This connection cannot be used with the VZAccess Manager.

  Error 907 "

  Hello

  Disable/remove your Verizon Wireless software or contact Verizon for help with this error. Posts like this occur generally when third-party utilities are used to manage connections and issues must be resolved by the Distributor, because they are often specific to that software.

  Verizon support suggest that you go in the Options Internet/Control Panel and on the Connections tab, check the option "never establish a connection" is selected.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I get the error message 0 x 80070002 when using Vista for backing up my data on an external hard drive.

  Original title: My Vista system will not back up my data to an external drive. I get the error message 0 x 80070002. I obviously don't want to lose any data on my hard drive. What can I do?

  I'm running Windows 9 and I'm trying to save on a Western Digital 1 .5TB external drive.in Vista

  Hello

  There is no windows 9 Microsoft

  There is IE9

  Read this vista information

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Why do I get the error message about wmsncs.exe when I start windows?

  When I start my computer, I get an error message asking if I want to report the windows message.  I learned that there is a problem with wmsncs.exe.  I think it is a real question and perhaps malware.  I have Microsoft security are. but running it delivers not report it as security.  I notice that MsMpEng.exe takes up to 100% of the PC resources and I am curious to know if these two issues are linked.

  If you think that maybe it's malware, check out this site for some great instructions.

  http://www.selectrealsecurity.com/malware-removal-Guide/

  I hope this helps.

• Trying to access C: I get various error messages. I tried to start with windows 7 Home premium safe mode

  I have several hard drives in my computer. Local disk C: is not available. Disks hard D; E; F; and G work without problem.                             Trying to access C: I get various error messages. I tried to start in safe mode, also tried to use the administrator user and still no luck.

  At some point, I'll get one of the following messages

  My computer ran fine until a week ago. I have I think some how disable the administrator account and disabled drive C:

  (1) error 0 event log x 081000202.

  (2) temporary files for users: (Sean-pc) are limited.

  (3) I need the net administrator authorization.

  (4) C: not available Windows\system32\config.cmd.exe

  Hello

  Problems with the drive in Windows may result from permissions problems, or even corrupt corrupted user accounts.

  1. What is the exact error message you get when accessing drive C?

  Method 1: I suggest you to activate the default Administrator hidden on the computer account and check if it helps.

  Try to activate the built-in Administrator account, follow these steps:

  a. Click Start and type cmd in the box start the search.
  b. in the list of search results, right click Guest and then click Run as administrator.
  c. When you are prompted by user account control, click on continue.
  d. at the command prompt, type net user administrator / Active: Yes and then press ENTER.
  e. type net user administrator , and then press ENTER.
  f. Type exit and press ENTER.
  g. disconnect from the current user account.

  Method 2: Try to take ownership of the drive and check to see if the same problem happens.

  a. right click on the drive and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  "Access denied" or other errors in the access to or work with files and folders in Windows: http://support.microsoft.com/kb/2623670

  Method 3: Check a drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Could not start the print spooler service, to get the error message: 1053-service cannot be answered on the local computer.

  Original title: Print printer printing

  I can't get the print spooler to turn on, get error 1053-service cannot be answered on the local computer. I tried password admin and services, but it will not turn on. Any suggestions?

  Hi, DUBOIS,.

  This error occurs when you do not have the latest service pack for Microsoft .NET Framework 1.1.

  Please answer the following questions.

  1. What operating system do you use?
  2. What is the brand and model of your printer?
  3. Did you of recent changes made to your computer?

  While your answer above information, refer to the suggestions for the following link.

  FIX: You receive an "error 1053: the service has failed to demand launch or control in a timely" error message when you stop or pause a managed Windows service

  http://support.Microsoft.com/kb/839174

  Hope the above information helps.

• When I run the DW application I get the error message AC_OETags.js cannot be opened.

  I just tried to open DW CC and I get the message "cannot open script file" Mac: Applications: Adobe Dreamweaver CC:Configuration:Floaters:AC_OETags.js "" (error 2)

  

  I looked in the file of configuration/float and he had no script of this name. I also looked on my laptop and there was no file by that name. I launched DW CC on my laptop without a problem.

  I did a search on my Mac Pro and found the file but it is not associated with Flash.

  Can someone help me with this error? Should I trash DW CC preferences?

  Thank you

  Thank you, which probably would have worked. I had a gun to my head a project so I uninstalled and reinstalled DW. Who did the trick. Thanks for your help!

• Impossible to follow all the links, get the error message "this operation has been cancelled due to restrictions on this computor"

  I get the message "this operation has been cancelled due to restrictions on this computor" any time that I try to follow a link.

  No idea comes the restriction and how can I turn it off?

  Hi P Coyne,

  1 does happen with all hyperlinks?

  2. did you of recent changes on the computer?

  3. what web browser do you use to open hyperlinks?

  Try the steps in the Microsoft article if you have a problem with hyperlinks in Microsoft outlook.

  You receive an error message when you click a hyperlink in Outlook

  http://support.Microsoft.com/kb/310049

• Get the Error Message When you try to reinstall Vista: Windows cannot open the required file: E:\Sources\install.wim

  I'm trying to reinstall windows vista for the following reasons:

  1. I have SQL Server 2008 installed on my computer.  I deleted some files a long time ago and it screwed something and I couldn't reinstall.
  2. I had partitioned my hard drive for vista half and half SuSE and I deleted who and when I did, I think I deleted another partition - my recovery partition (E:\?).
  3. I need to clean my laptop.

  When I try to start the installation of a disk and I put in my product key, I get the following error:

  Windows cannot open the required file E:\Sources\install.wim.  The file does not exist.  Make suure all files required for installation are available, and restart the installation.  Error code: 0 x 80070002.

  Let me know if you have any ideas how I can fix it.  My next step was to recreate this E directory and download the install.wim file and re start the installation.  I could not find the file install.wim well.

  Rob

  Hi Rob,

  I checked the link you provided.  What you downloaded was just the Vista recovery environment.  You cannot actually re - install Vista with that and if you blew your recovery partition unfortunately you may be out of luck.  You blew your partition containing Vista runs so the SFC will be of no help either.  I wish I had better news for you, but I don't see any way o get on without a Vista DVD.  I have good news for you if.  When you get your HP drive if you have problems with the installation, we will be able to help you with that.

  Take care and let us know if you need assistance when the disc arrives. Locutys of Borg

  Resistance is futile

  If you don't succeed the first time skydiving probably isn't for you!

• Cannot install the update of security KB2698365, get the error message ' set up cannot copy the file msado15.dll.

  Tried several times, if I check the update log it shows canceled, have tried to disable Norton. Tried to install it manually through the Setup Wizard.  He gets up then I get the message "set up cannot copy the file msado15.dll.

  Hello

  You did changes to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2
  I suggest you register the Msado15.dll file required.

  a. Click Start and then click Run.
  b. in the run dialog box, type the following commands in the Open box and then click OK.

  Regsvr32.exe ">"

  The> placeholder is the absolute path of the file Msado15.dll.

  The following examples show how you can specify an absolute path:

  Regsvr32.exe "C:\Program Files\Fichiers Files\system\ado\Msado15.dll"
  
  If the Msado15.dll file is saved successfully, you receive a message similar to the following message:

  DllRegisterServer in C:\Program Files\Common Files\system\ado\Msado15.dll successful.
  c. click OK.

  Method 3
  I suggest to perform the clean boot and then try to install the updates. Clean boot will disable all of the third-party program to ensure that all third party program is not causing the problem.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Method 4
  I would say that you can download and install the update to the clean boot from Microsoft download center.

  Update security for Windows XP (KB2698365)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30228