get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?

Similar Questions

• I can't extract the zip files; I get an error message that says: "Application not found".

  I can't extract the zip files; I get an error message that says: "Application not found".  When I check help & press the Start button, it tells how to do it.  I thought a program to automatically extract compressed files came with Vista.

  Hello

  1. you use the functionality of Windows Vista to unzip file or third party software?

  2. have you done any software or hardware changes on your computer before this problem?

  To work with this problem, see the following methods.

  Method 1:

  Scan of the SFC

  Refer to this article for more information on how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.

  http://support.Microsoft.com/kb/929833

  View the results of the analysis.

  Method 2:

  Run the fixit from following link.

  Difficulty of broken desktop shortcuts and common system maintenance tasks
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  In addition, I suggest you to check if the .zip file has been associated with a particular program in the section default programs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  Check if it helps.

• (Redirected) Dell audio drivers will not load when the system is turned on for the first time after his stop.

  Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.

  Hi akilesh.sharma18,

  Please repost this in the Audio forum from the laptop to help.

  http://en.community.Dell.com/support-forums/laptop/f/3517

• I have CS4 software. When the first time I install, I chose the content of the normal installation. Then I found that there is no photoshop in the start menu. After that, I try to put the disk in the laptop and find that it has Photoshop on

  I have CS4 software. When the first time I install, I chose the content of the normal installation. Then I found that there is no photoshop in the start menu. After that, I try to put the disk in the laptop and find it didn't photoshop on the list "installation."

  Download the files to install cs4 design premium and install ps to use them,

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Slow to open the first time after startup apps

  Slow to open the first time after startup apps

  How about, the second time, that is, close and reopen?

  Also download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple's Support personnel) of the CSA to provide a snapshot of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  

• Firefox crashes while loading images for the first time after windows starts upward

  every time I log on windows, Open firefox and load an image or a site with content firefox flash stops responding for 2 or 3 seconds and then returns to normal after that and everything is fine... it happens only when I open firefox for the first time after starting windows to the top...
  thing I tried
  Start windows and Open firefox in safe mode (does'nt fix the problem)

  updated 13 solved the problem...!

• When I want to print my coreldraw 13 error "file of valid workspace not found in the specified path.

  whenever I try to print a document on my coreldraw is will just put "file of valid workspace not found in the specified path.

  Hello

  Thanks for posting your question in the Microsoft community forum!

  I understand that you encounter printing problems in CorelDraw. I will try to help you with this.

  (1) is the issue limited to only Corel Draw?

  I suggest you to restore the default values by pressing the F8 key while the program starts.

  Reference: File not found valid environment...

  http://CorelDRAW.com/forums/t/4156.aspx

  If the problem persists, I suggest you contact the link mentioned below for the best support.

  http://CorelDRAW.com/forums/

  Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• the date of the first time, I install app

  I need the date of the first time I have install agame, very important to me

  The problem happened when my brother remove my apple mistakenly ID so I re register once again with the same old apple ID but the game does not connect with game Center and was told that (the game is attached to the different game Center account than you are logged)

  I wrote to the support of game and I asked them to change the email on the game, but they asked me to tell them the date of the first time I have install the game and play with him. can - what someone knows the way to know this date

  How I can got to this date, I have this game for 3 years and I don't want to lose my progress if some damage that happened to my iPhone

  Please help me

  I used iphone 4

  Best regards

  Mack

  Sign in to your iTunes and make appear the purchase history, follow the steps mentioned in this article:

  See your purchase history in iTunes on Mac or PC store
  Find which apps, songs, movies, TV shows or books you bought from the iTunes Store, App Store and iBooks Store.

• Error 150:30 when you try to use an application for the first time after installation

  I have CS 5.5, but need to temporarily install the suite CS4, but when I try to use it after installing a pop-up windows is displayed with the message "Error 150:30" and ask me to restart my computer before using it. I'm sure that there is only one computer using my serial number, but when I try to proof on a second computer it tells me that the serial number is enabled in both computers already.

  Hello

  Error 150:30 refers to licensing. You must contact customer service and verify the number of activation of your software. If it's good, then you can follow these steps as appropriate for your operating system:

  http://kb2.adobe.com/cps/512/cpsid_51260.html for MAC OS

  http://kb2.adobe.com/cps/405/kb405970.html for OS WIN

  I hope this helps.

• Help! Re: Getting iTunes to work after installing for the first time - it installed because I just got my first iPhone - 3Gs.

  First timer, non-techie, "installed" iTunes on my laptop HP 64-bit Windows, a few things work like 'radio', but cannot open iTunes store and cannot finish syncing my iPhone it and freezes usually when I click too much.  The installation is wrong (even if I have the latest version of 64-bit "installed"), or what? Oh, and I have Windows Vista - K.

  You have problems with the products Apple - itunes as well as the iphone.

  It is best that you ask questions in the communities of Apple Support forums.

  Try the following 2 links:

  iTunes for Windows
  https://discussions.Apple.com/community/iTunes/itunes_for_windows

  Cannot connect to itunes store

  http://support.Apple.com/kb/TS1368

• My system hangs during startup "for the first time" after running the system recovery.

  HP G62 - 227 CL

  Win 7 (64 bit)

  No error message, in itself; just a screen frozen on reboot.

  Months, my computer has suddenly started glitching on me.  I stopped and tried a reboot.  The system froze on start with flying colors.  System recovery tried several times but must have made a mistake because he wouldn't.  Resolved to buy a new hard drive and reinstall from the recovery disks.  Delayed unnecessarily until today, months later.

  Before you buy a new hard drive, has decided to relaunch the system recovery.  It worked!  I tried the option that has deleted everything and restored to the software and factory settings.  Everything seemed to work like a charm: hard drive reformatted, reinstalled software, the system prompted me to reboot.  Yes, I did.  Windows started to boot, "Preparting your computer for first use of Setup" appears... and freezes.  For hours.  Hard drive led is off.

  BTW, made sure the button Wi - Fi was on what I read on the problems of recovery if it was turned off when the program is run.

  Restarted.  Press F11.  A ran maintenance and checked the hard disk for errors.  There are errors.  Unfortunately, the default setting of CHKDSK does not repair them.   A opted for a command line.  RAND CHKDSK again with option '/ f/r' seen in other posts.  Here I am too ignorant to get the program to run properly, I guess.  I ran CHKDSK on the two player X and C.  No error found... sort of.  I know they exist because the system will not start.  (Yes, I tried again.)  Return to the command prompt, I tried to run CHKDSK on the drive C again.  This time I got a message that I must first dismount (remove?) the reader.  As I don't know what that means, I opted for the 'no' and have decided to post this help message.

  So.  Suggestions on what do I do then?  More specifically: How do CHKDSK to fix the errors it found?  I think the message was: "errors in $130 of the sector...". "It shows this message two times at the end of 62%.  Freezes for a long time.  Gets will still only slow down to a crawl again around 70%, but no longer.  Then returns to the start of system recovery screen.

  System recovery ran again for the pleasure.  Again, seemed to work like a charm.  Unfortunately, the laptop again sits frozen at "Preparing... for first use" screen again.  It heats more turns.  The audible fan works now plans higher... If none of this helps.  I am stopping and waiting for your advice.

  Thank you!

  Zac:

  My apologies for the delay to return to you.  Believe you that computer gremlins have not hit my very stable desktop which has been fine for years with sudden instability driver?  McAfee thanks for this most recent update!

  In any case, after several diagnoses and find the hard drive has failed in each of them, I decided to install a new copy of Windows 7 as a test while I wait for my upcoming recovery disks in the mail.  I did it by removing all partitions on the drive and do a fresh install.  Here again, everything seemed to go well until that (apparently) a certain area of the drive was used to save/installation of the files.  Even after CHKDSK runs several times (each time he repaired several defective sectors but stalled after only 10% of the disk) the system will become unstable - the last number being a blank screen after logging on to Windows.  So, all in all, epic fail on the side of the hard drive.  The new drive is installed and waiting for my recovery disks.

  Thanks for all your suggestions.  They have been a great help with information, but not with the results because of the training.

  M

• Downloaded CC for the first time earlier, installed first, but it won't open?

  It says it is installed and up to date, but clicking on it does nothing...

  Beattie, please sign out and sign in the back of creative cloud and check whether or not the first answer. Alternatively, you can try to reset the Preferences . Make sure that you have updated the graphics driver.

  Let us know if these aid measures.

  Atu_Saini

• PSE10 error greeting card: valid size not available for this creation

  Does anyone have a solution for this error? :-(

  The box appears when you click the 'Greeting Card' option under 'create '.

  Details:

  PSE10 (brand new facility, the deleted files of pref), OSX Lion, latest updates, on the admin account.

  See you soon,.

  Philippe

  Bingo: I found another file,

  [My username] / Library/Application Support/Adobe/Elements Organizer.

  Rename it to "Old organizing elements" that solved the problem!

• I get an error when you connect (404 Not Found)

  Whenever I have connection I get this Message.

  

  Hey Liam, I finally thought to it. He tried to connect to another site. Thank you for trying to help though.

• members of the team get tiralversion when they connect the first time, after nog activation trial period is possible, they showed in the team, with good ID but adobe refuses to acknowledge the affiliation. Adobe support is the worst ever seen, some Indian

  How I can activate

  Hello

  I apologize for the frustrating experience.

  Don't you see State of the team member of the license as 'Active' on the admin console?

  Please visit: https://helpx.adobe.com/creative-cloud/help/manage-teams-membership.html

  Kind regards

  Sheena