get the error when you run bootcamp on Sierra
When you run Bootcamp-can not go beyond the second screen that gives me an error of pop-up windows 'startup drive must be an OS X extended (journaled) formatted partition.
Workaround attemps I have partitioned my drive native and also used an external hard drive, both in format OS X extended (partitioned).
I tried to use bootcamp years ago and ran across similar see the questions to stop. I thought I'd try a second time to run Winzozz 10. So frustrating!
OS X Terminal, please after the release of
diskutil list
Apple does not officially support Windows on external drives. Microsoft is only supported under Windows Enterprise.
Tags: Windows Software
Similar Questions
-
VISA: (Hex 0xBFFF001) timeout expired before the operation is complete. I get this error when you run a VI (instrument is set up to be controlled remotely using the TCP/IP Protocol)
Please suggest a solution.
Thank you very much, it worked!
-
Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
Got the unable to create the specified taskHello
What is the exact error message received when the problem occurs?
Methood 1:
Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.Method 3:
You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:
http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software
Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
I hope this helps! Let us know if you need more assistance.
-
Get the error when you attempt to cancel the shipment of Release 11i
Hi allI get the error while I am trying to cancel the amount open against relase expedition with multiple (4) below the distribution lines.
Send # 2 # 3 quantity invoiced greater than the quantity shipped 2205 88181 Distribution
Scenario-
For shipment of release # 2 -
Quantity ordered - 8820
Due Qty-2
Received Qty - 8818
Qty. to beak - 8818
Press release # 2 is to have 4 lines of distributions. Against distribution, line 1, 2 and 3 of the delivered quantity is 2205 while distribution on line 4, deilvered qty is 2203.
But the quantity invoiced is 8818, only line 3 distibution and against the other lineages invoiced quantity is 0.
Please let me know what to do now in order to cancel (the relase open expedition 2) amount in this case.
Good reply as soon as POSSIBLE.
Hi all
It is not possible ancel relase shipping open quantity (2) in this case in the support environment.
It is better for finally closed the expeditions of this release.
But it is worth noting that finally close or cancel actions are intended to prevent additional changes to the purchase order. This includes invoice or receipt.
This cannot be undone.
Kind regards
Piyush
-
This operation is limited by the administrator of the error when you run the command get-stats
I have a script that use to collect monthly performance report - but after the upgrade of the CR, the script fails with the error below
Get-Stat, this operation is limited by the administrator - "vpxd.stats.maxQueryMetrics". Contact your system administrator.
I tried after the Ko -https://kb.vmware.com/kb/2107096 , but I don't see the webclient service performance
Please notify
As you use the API and not the Web Client, you need only modify the value in the advanced settings of vCenter.
This can be done with
Note that the value of-1 disables the limit altogether.
The default value is 64.
Get-AdvancedSetting - YourvCenter of the entity-name config.vpxd.stats.MaxQueryMetrics |
Game-AdvancedSetting - value - 1
-
Get the error when you try to burn Windows 7 pro disc: 0 x 8004005
I downloaded windows 7 Professional (download 2 GB) and when I click on "launch" said to insert the DVD to burn to the disc. I put the disc in, it gets all the way to the end and then gives me this error code: 0 x 8004005 so I can't complete installation. what I'm doing.
Download Windows 7 proper. ISO file
Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.isoAfter you download the .iso file using ImgBurn or gear to create a DVD ISO bootable.
Create a Windows 7 Bootable DVD using the. ISO file
Engraving of a file of Windows 7 ISO on a DVD
http://support.Microsoft.com/default.aspx/KB/977640ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
It supports a wide range of image file formats, and it's free.
(BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
http://www.ImgBurn.com/Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
(The steps are the same, except that you do not create a repair disk but complete an installation DVD)Note: Always use DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.
= Upgrade to Vista =.
First run the Windows 7 Compatibility Checker
http://www.Microsoft.com/Windows/compatibility/en-us/default.aspxWindows 7 Upgrade Advisor
http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15Here are answers to some common questions about the 32-bit versions and 64-bit Windows.
http://www.Microsoft.com/Windows/Windows-7/compare/32-bit-64-bit-FAQ.aspxUpgrade Windows Vista to Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7clean startup in Windows Vista and try the upgrade to Windows 7
http://support.Microsoft.com/kb/929135
(The steps # 1 a, 1 b, 1 c, 1 d and 1e)Disable or uninstall your anti-virus software and firewall temporarily.
How to upgrade from Vista to Windows 7 Home Premium: http://www.howtogeek.com/howto/6892/how-to-perform-an-upgrade-from-vista-to-windows-7/
Upgrade Windows Vista to Windows 7 (custom installation)
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-customAlso: Windows XP to Windows 7 Migration Guide
http://TechNet.Microsoft.com/en-us/Windows/ee150430.aspx= XP update =.
Upgrade Windows XP to Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7How to move from XP to Windows 7 in 4 easy steps
http://www.MakeUseOf.com/tag/how-to-upgrade-from-XP-to-Windows-7-in-4-easy-steps/=============== Keyless Install ===============================
How to make a 'Keyless Install"of Windows:
Boot from the Windows 7 DVD disc, you create and launch the installation.
After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".You now have a 30-day grace period to activate Windows.
During this 30-day grace period you can try to solve your problems.
After you are satisfied with all the problems have been resovled then activate Windows.====================== Device Drivers =================================
Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.
If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersTips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problemsGraphics/video drivers:
Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us= How to activate Windows 7 by Internet =.
1) click Start and in the search for box type: activate
2) click on the 'Activate Windows' option at the top of the list
3) click on "now, activate Windows online.
(4) enter your 25-character product key (not case sensitive)
5) click "Next" and wait for the key must be verified.Another method - to reach a real person:
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxActivation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048J W Stuart: http://www.pagestart.com
-
Get the error when you use the Oracle 9.2 on RRS 4 installation
Hi all
I was getting error while installing oracle 9.2.0.4 in Red hat advanced server 4
YES was generating a messagecould not able to relink ins_sqlplus.mk and ins_rdbms.mk
but I'd ignored, after installation of the oracle s/w, I relinked bleow files
I also tried running the command below
Please suggest me if this will have an impact on the DB[oracle@oracle lib]$ make -f ins_sqlplus.mk install but when i try to make ins_rdbms.mk i was getting a error [oracle@oracle lib]$ make -f ins_rdbms.mk install . . . . . .. . u01/app/oracle/product/9.2.0.1/db_1/lib32/libgeneric9.a `cat /u01/app/oracle/product/9.2.0.1/db_1/lib32/sysliblist` -Wl,-rpath,/u01/app/oracle/product/9.2.0.1/db_1/lib:/lib:/usr/lib -lm `cat /u01/app/oracle/product/9.2.0.1/db_1/lib32/sysliblist` -ldl -lm -lvsn9 /usr/bin/ld: crt1.o: No such file: No such file or directory collect2: ld returned 1 exit status make[1]: *** [/u01/app/oracle/product/9.2.0.1/db_1/rdbms/lib/extproc32] Error 1 make[1]: Leaving directory `/u01/app/oracle/product/9.2.0.1/db_1/rdbms/lib'
Published by: user00726 on July 8, 2009 23:06If the error only occurs when you start the dbca Wizard, the database itself should be ok. Before using it for the production you can stress test your db using swingbench or hammerora to be sure that iti works well.
Concerning
Oliver
-
Get the error when you try to write to a file using java script in my Metro app
I'm discovering a problem in my App Metro and thought that I will create a file to copy all log messages in ther... I tried the following
var LogFile = "LogFile.txt";
() Windows.Storage.DownloadsFolder.createFileAsync("LogFile.txt").done
{function (file)
LogFile = file;
});
Windows.Storage.FileIO.appendLinesAsync (log file, "Test") .done ();<-- line="">-->
but then, I get the following error:
Unhandled exception, line 26, column 5 in ms-appx://windowsmultimediaperformanceapplication/js/default.js
0x800a000d - JavaScript runtime error: Type mismatch
It creates the file correctly, but it fails to write to it. Any help will be appreciated. I looked at the code example provided and talked about when writing this.
Hey Kajal,
The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.
http://social.msdn.Microsoft.com/forums/en-us/winappswithhtml5/threads
-
get the error when you use the TRIM method in the collections
Hi Experts,
When you use the TRIM method I get below error. I make any mistake here?
DB: Oracle 11g
SQL > declare
2
emp_tab of type 3 is the employee table % rowtype index directory.
4 l_emp_tab emp_tab;
56 start
7
8 select * bulk collect into l_emp_tab of employees;
9 l_emp_tab.trim (5);
10 dbms_output.put_line (l_emp_tab.count);
11
12 end;
13.
l_emp_tab. Trim (5);
*
ERROR on line 9:
ORA-06550: line 9, column 2:
PLS-00306: wrong number or types of arguments in the call to 'TRIM '.
ORA-06550: line 9, column 2:
PL/SQL: Statement ignored
Thanks in advance for your help.
See you soon,.
Suri
For PL/SQL collections "index by" you cannot use the TRIM function. If your collection statement excludes the portion "index of...» ", then you can.
Gerard
-
Get the error when you try to rebuild StoreFrontModule.jpr
Hi friends,
New IAM came into the world of the ADF. IAM folllowing steps to create a schema of DOM from the link http://www.oracle.com/technetwork/developer-tools/jdev/index-095536.html
The scheme was built successfully, iam now get many erros when the StoreFrontModule.jpr has been rebuilt.
C:\FODSchema\StoreFrontModule\StoreFrontService\src\oracle\fodemo\storefront\entities\WarehouseEOImpl.Java
Error (3,18): package oracle.jbo does not exist
Error (4.18): package oracle.jbo does not exist
Error (5,18): package oracle.jbo does not exist
Error (6.25): package oracle.jbo.domain does not exist
Error (7.25): package oracle.jbo.domain does not exist
Error (8.25): package oracle.jbo.server does not exist
Error (9.25): package oracle.jbo.server does not exist
Error (10.25): package oracle.jbo.server does not exist
Error (11.25): package oracle.jbo.server does not exist
Error (17,38): cannot find symbol
Error (29,20): could not find the class EntityDefImpl
Error (38,32): could not find the class EntityDefImpl
Error (104,12): unable to find the class Date
Error (125,12): unable to find the class Date
Error (143,44): cannot find class AttributeDefImpl
Error (179,42): cannot find class AttributeDefImpl
Error (219,12): cannot find class RowIterator
Error (226,12): cannot find class RowIterator
Error (234,19): unable to find the Key class
Error (242,27): cannot find class AttributeList
C:\FODSchema\StoreFrontModule\StoreFrontService\src\oracle\fodemo\storefront\entities\AddressEOImpl.Java
Error (3,18): package oracle.jbo does not exist
Error (4.18): package oracle.jbo does not exist
Error (5,18): package oracle.jbo does not exist
Error (6,18): package oracle.jbo does not exist
Error (7.25): package oracle.jbo.domain does not exist
Error (8.25): package oracle.jbo.domain does not exist
Error (9.25): package oracle.jbo.domain does not exist
Error (10.25): package oracle.jbo.server does not exist
Error (11.25): package oracle.jbo.server does not exist
Error (12.25): package oracle.jbo.server does not exist
Error (13.25): package oracle.jbo.server does not exist
Error (19,36): cannot find symbol
Error (21.20): could not find the class EntityDefImpl
Error (304.32): could not find the class EntityDefImpl
Error (314,12): unable to find the class DBSequence
Error (321,30): unable to find the class DBSequence
Error (454,12): unable to find the class Date
Error (476,12): unable to find the class Date
Error (496,44): cannot find class AttributeDefImpl
Error (507,29): unable to find the class TransactionEvent
Error (515,5): cannot find the RowSet class
Error (539,42): cannot find class AttributeDefImpl
Error (550,12): cannot find class RowIterator
Error (557,12): cannot find class RowIterator
Error (564,12): cannot find class RowIterator
Error (571,12): cannot find class RowIterator
Error (579,12): cannot find the RowSet class
Error (589,40): unable to find the class DBSequence
Error (589,19): unable to find the Key class
Error (596,12): unable to find the class EntityImpl
Error (603,34): unable to find the class EntityImpl
Error (612,24): cannot find class AttributeList
C:\FODSchema\StoreFrontModule\StoreFrontService\src\oracle\fodemo\storefront\store\queries\OrdersVOImpl.Java
Error (6,18): package oracle.jbo does not exist
Error (7,18): package oracle.jbo does not exist
Error (8,18): package oracle.jbo does not exist
Error (9.18): package oracle.jbo does not exist
Error (10,18): package oracle.jbo does not exist
Error (11.18): package oracle.jbo does not exist
Error (12.25): package oracle.jbo.domain does not exist
Error (13.25): package oracle.jbo.domain does not exist
Error (14.25): package oracle.jbo.server does not exist
Error (20,35): cannot find symbol
Error (57.38): could not find the local class
This list is long... .i was a little bit upset to see so many mistakes :(
Is someone can pls tell me where he has gone wrong?
IAM using Jdeveloper 11.1.2.1
Concerning
GouthamYou must have the role of Developer Studio in order to use the ADF.
-
Question about the error when you run DBUA
Good afternoon
I try to run the Database Upgrade Assistant. At the beginning of this process, I get a window with the following error message:
SQL * Plus, I get the following:Initialization parameter log_archive_format must contain %s, %t and %r. Your current setting is "ARC%S_%R.%T". Update this parameter prior to upgrading the database.
It seems to me that the log_archive_format has the required format.SQL> show parameter log_archive_format; NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ log_archive_format string ARC%S_%R.%T SQL>
The Question is: My format is wrong? If so, what is the problem with him? If this is correct, what should I do to get past this error?
Thank you very much for your help,
John.Hello
You have 3 format settings, but our opinion is not important, because it appears THAT DBUA consider as wrong format! I have never tried to put %t after the '. ' in fact. Maybe you can try with 'ARC_%s_%r_%t.arc '?
Best regards
Phil -
Get the error when you try to connect to the application of HFM of FDM (like Targe)
Hello
can someone help me when I open FDM and click metadata-> order pictures... and try to get focused on that time period, it generates an error "unable to authenticate the specified user %0. »...
Log file of this...
* Start the journal entry for the Runtime Error FDM [2008-11-07-06: 41:05] *.
-------------------------------------------------------------
ERROR:
Code...-2147220966
Description... Could not authenticate the specified user. %0
Error reference number: {06CFB6AF-0B83-40DC-8E32-EBD1275318D8}
NUM: 0x8004021a; Type: 0. DTime: 2008-07-11 06:41:05; SVR: DEV-HFM-APPS1; File: CHsxClient.cpp; Online: 2272; Worm: 9.3.1.0.1502;
Online: 391
Process... clsBlockProcessor.ActConnect
The component... upsWBlockProcessorDM
Version...................................... 931
Thread....................................... 4752
IDENTIFICATION:
User... osadashiv
Name of the computer... DEV-HFM-APPS1
App name... fdmapps
Client App................................... WebClient
CONNECTION:
Provider..................................... SQLOLEDB
Database server... 172.20.160.185
Name of the database... fdmapps
Trust connect... Fake
Connect status... Open connection
GLOBALS:
Location..................................... Sample
Location ID... 748
Location Seg... 2
Category..................................... WLCat
ID of the category... 12
Period....................................... Oct - 2008
Period ID.................................... 2008-10-31
POV Local.................................... Fake
Language..................................... 1033
User Level................................... 1
All Partitions... True
Is Auditor................................... Fake
I put the machine, global session logon information profile, etc... and already download 2 adapters... but still getting the same error...
Please help me...
Thanks in advance...Hello
It seems that something is wrong when FDM tries to connect to HFM.
You need to understand:
-To connect with FDM which user are you using
-Do you use unified or comprehensive as your method of connection (settings of integration)
-Have you attended a user in the profile of the machine?
-You entered a domain anywhere?The user you are using must have the access rights to HFM. Test it directly in the client.
Kind regards
Marc
-
Intalled CC but get the error when you try to install the apps?
Any ideas? be p * ssed off now. About to cancel the subscription
Hi Davidg9319675,
Please let us know if you still experience the problem.
If so, then please refer to the below links:
- If you receive a specific error code during the installation of an application, see error download or update creative Cloud applications.
- If this does not resolve the installation problem, you can find the Setup log that generate creative Cloud applications. For more information, see troubleshoot installation problems with the log files.
-
I get an error when you run adobe downloader
I'm not able to run adobe downloader (in order to install a trial version of Photoshop elements 13). I am running windows 7, having administrative privileges, have tried on Firefox and Internet Explorer. The message: sorry an error has occurred. This application cannot be installed because this installer has been misconfigured. Please contact the application author. I downloaded Setup several times, where there was a small problem. Does anyone else have this problem?
Debofca please see the trial for Acrobat Pro: download fails because the file is corrupted where was just discussed this topic.
-
I get the following when you try to run programs such as Nero:-"this program requires the file AdvrCntr6.dll, which is not on this system."
Please can you help me?
Original title: AdvrCntr6.dll
Hello.
There is a guide for fixing here:
http://pcsupport.about.com/od/findbyerrormessage/a/advrcntr6-DLL-not-found-missing-error.htm
Maybe you are looking for
-
Whenever I have create a bookmark, it stores in "Unsorted Bookmarks" and not on my toolbar. How can I change that so I don't have to do it manually for each bookmark? Thank you!
-
"Device Access Manager" crashes
I've got V 8.3.4.1811 HP customer security pre-installed on my new ProBook G2 of 450. However when I try to access the "Device Access Manager" the program hangs and displays this error: "at HP. ProtectTools.DeviceAccessManager.BaseViewModel.Load)at H
-
How to free download of iMovie because MacBook Pro is supposed to be free, but I'm not. pls help
-
My bodyguard printer print Microsoft Windows support page and nobody asked him. Help!
-
It's my first router linksys I thought that linksys/cisco is the best on the market, but I only have problems with the unit Maybe it's a stupid configuration item that I did not, maybe it's something else. Discover Thus begins the story: I own a mode