get the fatal error when you try to start Windows 7 Easy Transfer...

Similar Questions

• Getting the 80070005 error when you try to update Windows for Vista 64 X

  Even if my computer is configured to automatically download Windows updates, it seems he never succeeded to date.  When I push an update, I get the error code 80070005.  I can't find a solution for this error.  Have no problem computer operating, except cannot get Easy Photo Print to Canon to work.  Whenever I try, I get this message: Thunking spooler APIs from 32 to 64 process has stopped working.  It will prompt you to get an update of Windows.

  Hi, Tom H7193,.

  You can read the following article and try the steps and check if you can install Windows updates:

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005

  http://support.Microsoft.com/kb/968003/en-us

  Note: Applies to Windows Vista.

  You can also try to download the latest version of the printer drivers for Windows Vista 64 bit and check:

  http://www.USA.Canon.com/Cusa/professional/products/printers

  Hope this information is useful.

• Get the 80096010 error when you try to run windows updates.

  error 80096010

  error 80096010 Hi I can't update tried reformatting and now I have the same thing and my windows will not now be, kind of frusterating can anyone help

  with telling me what this code is

  Troubled amd user

  See the link below as our user had the same problem as you and they find a solution that worked.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-80096010-when-trying-to-update-Windows-Vista/1bcb9877-D949-49DE-8329-ead00386d4e2

• Get the 0x8DDD0004 error when you try to install windows updates

  Error: 0x8DDD0004 occurs when checking for updates with the message "the site has encountered a problem and cannot display the page you are trying to view.  I have already installed and run Microsoft 'Fix - it' without success.  Windows XP SP3

  Ed,

  http://support.Microsoft.com/kb/914224/en-us

  UTC/GMT is 21:03 Sunday, July 29, 2012

• error 14001 itunes not installed correctly, get the Assembly error when you try to reinstall

  installation iTune error

  I tried to install iTunes for the past few days, I have an old one that I have to adjust that give me and error when you try to open "itunes is not installed correctly. "Please re install itunes error 7 (windows error 14001)" so I try to install the new I adjust 10.5 and I get this message

  "a mistake occrred in the installation of the Assembly microsoft.vc80.crt, type is"win32", version +"8.0.50727.6195".publickeytoken ="1fc8b3b9a1e18e3b".
  processorArchitecture = "x 86". See Help and support for more information. HERSULT:0X800736FD ".
  I get very frustrated because I need I tunes to get into my new i pod. I looked for solutions on apple, but nothing came.
  also, I get this error when I try to install the new QuickTime 7.7.1, tried to uninstall itune and whatever it takes like I said here: http://support.apple.com/kb/ht1925, but still, I get the same error when trying to install everything back. I read, you can resolve this error by installing each update Windows but my windows updates also give me an error when I check updates saying ' an error occurred while searching for new updates for your computer or errors found: update code 80080005 windows has encountered an unknown error. " Can someone help me please. I get very frustrated by that. Thanks in advance

  Hello

  I suggest you to return these KB articles and check if it helps.

  http://support.Apple.com/kb/TS3074

  http://support.Apple.com/kb/TS3074

• Get the 43 error when you try to update creative cloud.

  Whenever I try to update the creative cloud application, it sticks to 71% and it shows an error reading "Installer could not access a critical file. Please try to reinstall. (Error code: 43). "I tried several times and even after a system restart and a permissions repair, I get the same error. Any suggestions?

  I went through the towers with chat support on this issue. I'll list the steps and also the chat session, we had here:

  Steps to follow:

  1. Open the activity monitor and close Adobe all related applications
  2. Navigate to: / Library/Application support/Adobe
  3. In this directory, you will see a folder named OOBE - rename this folder in OOBEold
  4. Navigate to: MAC HD/Applications/Utilities directory
  5. There, you will see a folder named "Adobe Application Manager" - remove
  6. Download Adobe here cleaning tool: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems/_jcr_conte nt/main-pars/accordion_container_1/accordion-par/accordion-item-1/accordion-item-par/proce dure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleanerTool.zip
  7. Open the cleaning tool and choose to clean 'Creative cloud' only.
  8. Download and install Creative new Cloud - https://ccmdls.adobe.com/AdobeProducts/KCCC/1/osx10/CreativeCloudInstaller.dmg

  Support Chat session:

  Please contact Adobe.
  A representative will be with you shortly.

  You are chatting with "Amel" now

  Amel: Hello. Welcome to Adobe Technical Support.

  Amel: Hi Josiah.

  Josiah Wallingford: Hello

  Amel: I received your request. Allow me a moment to check your account and review the details of your request.

  Amel: Thank you for your stay online.

  Amel: I understand that you can not update the creative Cloud desktop application you receive error code 43. Is this correct?

  Josiah Wallingford: that's right

  Amel: Thanks for the confirmation of the issue. I'll be happy to check and help you with that.

  Amel: Can I know the exact error message you are getting when trying to update the product?

  Amel: I know the exact error message full you get while trying to update the product? *

  Josiah Wallingford: I'll have to run a second time to get the error. One moment

  Amel: sure.

  Josiah Wallingford: Installing update... 71% Installer could not access a critical file. Please try to reinstall. (Error code: 43) Contact Customer Support

  Amel: Thanks for the information.

  Amel: Josiah, let's try doing some troubleshooting steps. Lets work together to solve the problem.

  Josiah Wallingford: sounds good amel

  Amel: Leave the desktop application CC, close all Adobe activity monitor process, he raises and try to update.

  Josiah Wallingford: I already did with the latest technology... Gave us the same error

  Amel: Please open Finder > go > utilities > Activity Monitor.

  Amel: Okay.

  Josiah Wallingford: after we tried we were disconnected

  Amel: Thanks for the information, Josiah

  Amel: Again please close all Adobe applications, including desktop application Cloud creative of the activity monitor.

  Josiah Wallingford: OK

  Josiah Wallingford: OK done

  Amel: Rename then Adobe Application Manager, OOBE folder.

  Amel: Open Finder > go > go to folder > / type library > Application support > Adobe folder.

  Josiah Wallingford: OK

  Amel: Please let me know if you have trouble locating the records.

  Josiah Wallingford: I found it

  Amel: great.

  Josiah Wallingford: now what?

  Amel: Rename another OOBE folder

  Amel: Go to Finder > go > go to folder > Type ~/Library > Application support > Adobe folder.

  Josiah Wallingford: I'm in this folder. I see a folder called "OOBE". What you want that I rename it to?

  Amel: OOBE and rename it OOBEold.

  Amel: Yes, you are right.

  Josiah Wallingford: done

  Amel: After that, delete the application Adobe, creative MAC HD cloud file manager > Application > utilities.

  Josiah Wallingford: done

  Amel: Now let's start cleaning tool. I'll give you the link to download the cleanup tool...

  Amel: Please click here.

  Amel: Double-click AdobeCreativeCloudCleanerTool.zip to extract the

  Amel: AdobeCreativeCloudCleanerTool.dmg.

  Josiah Wallingford: Ok it's open... should I choose "Clean All"?

  Amel: Please choose only creative cloud.

  Amel: If please remove creative Cloud desktop application and try to install the desktop CC application.

  Josiah Wallingford: OK done

  Amel: Now, try to install the desktop CC application.

  Josiah Wallingford: Install it from where?

  Amel: I'll give you the link to direct download for desktop CC applications.

  Amel: Please click here to download desktop cc. applications

  Josiah Wallingford: Is the installation

  Amel: Okay.

  Josiah Wallingford: Ok it's installed... which is the latest version?

  Josiah Wallingford: its not asking me to update any longer

  Amel: Please launch CC desktop applications and see if you are able to see CC 2014.

  Josiah Wallingford: I see them. They are eager to be updated.

  Amel: Please click Refresh.

  Josiah Wallingford: Ok it is updated... looks like it will take some time

  Amel: Okay.

  Josiah Wallingford: I'll get back in touch if I have other questions.

  Amel: of course, I'll keep the case open for your convenience so that you can contact us if you still have the same problem.

  Josiah Wallingford: great. Thank you

  Amel: Your file number is *.

  Amel: You can see the file number to contact again us.

  Josiah Wallingford: Got it. good day.

• Get the syntax error when you try to reproduce in the auxiliary database

  I get the following error message when you try to duplicate an instance:
  
  D:\ > rman target sys/xxx@hr3 rmancat/xxx@rman AUXILIARY catalogue.
  
  Recovery Manager: release 9.2.0.7.0 - Production
  
  Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
  
  connected to target database: HR3 (DBID = 3470722132)
  connected to the recovery catalog database
  connected to the auxiliary database: CLONE (unassembled)
  
  RMAN > DATABASE of TARGET in DOUBLES at THE CLONE until TIME ' TO_DATE (February 24, 2011 0:00:06).
  (0 ',' JJ-MM-AAAA HH24:MI:SS') ".
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00558: error occurred during parsing of order entry
  RMAN-01005: syntax error: found 'clone': expected an a: 'double-quoted-string '.
  identifier, single-quoted-string ".
  RMAN-01007: 30 line 1 column file: entry standard
  
  Is it because I named the cloned database "CLONE", and that is a reserved word for Oracle, or is this something else that I missed?
  
  Thanks for any response...
  / Ronny

  Hello

  Is it because I named the cloned database "CLONE", and that is a reserved word for Oracle, or is this something else that I missed?

  Fix this error related to the keyword.
  You can run into a new problem in function if your configuration is incorrect.
  (backup items available on the clone host, file systems, settings etc..)
  Rgds,
  Tycho

• Get the password error when you try to reinstall Microsoft money

  After the failure of an upgrade of windows 8, I had to reinstall Vista. I reinstalled Money sunset and then tried to restore my data. I can connect and start the money with my money the password. When I try to restore my data, it is said "money (my accounts.mny) entry windows live ID to access the file.  All attempts to give me a password error. I have logged on to windows live, changed my password, tried my money password. connected money to MSN without being able to go beyond this error and restore my data.  I have improved the money every year until it was abandoned and changed to the sunset that I used without any problem so far. Thanks Rod

  Hello

  Thanks for posting your question in the Microsoft Community!

  I suggest you to ask your question, the Forum of money from Microsoft to improve the assistance.

  http://social.Microsoft.com/forums/en/category/money

  I hope this helps.

• Get the F3-F200-002 error when you try to start Windows 7 64-bit edition

  I have a Toshiba Satellite computer laptop C855-S5214...   I had to restart the computer after an AVG update. It closed and restarted and got stuck on the windows icon (icon was always moving / floating, but it wouldn't keep loading)...  He did this thing even a week or two ago... We took out the battery and put it again and it booted up fine... this time... nothing...   (don't ask me why we pulled out the battery... we (that is her husband) did and told me eventually--)

  At first he would stop at the windows icon and just stay there forever...  Then, I did F8 and started in safe mode... which worked well...  I tried to do the repair, and it comes to say it could not be repaired and to close... then I tried the last known good configuration startup and that did nothing at all... literally... after a few readings on the internet, I decided to use my 5 recovery disks from Toshiba that I made when I came to the computer and try to reformat save my files... I went into Setup and said to boot from the CD/DVD-ROM, because I could not do that without forcing this way... he got through 3 disks and then the disk 4, I got the F3-F200-002 error and now I can't do ANYTHING without getting this error can not enter setup F2...  I get the error until it's here, so I can't recover even to change it to boot from a hard disk instead of the CD/DVD drive...  I can get to the F8 screen but what I chose, I get the error...  I even tried to put in disk 1, as it is supposed to be the 'solution' to this error, but that does not work either...

  Leslie

  Hello

  It is an error code very vague on what is best to fix it.

  And the closet I can find is 0002, no 002

  Solutions to be a module of bad memory, bad sectors on the hard drive, defective recovery disks or a faulty hard disk can designate.

  I suggest you read the information contained in these links:

  https://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65437

  http://forums.techarena.in/operating-systems/1413251.htm

  http://forums.techarena.in/operating-systems/1381256.htm

  To reinstall from the Toshiba recovery partition, makes you the disks, you press the 0 (zero) to start, then follow the instructions for installation back to factory settings.

  See you soon.

• get the 0xC004F015 error when you try to save a license of windows 7 using a kms server.

  C:\Windows\System32>cscript c:\Windows\System32\slmgr.vbs-ipk xxxxx-xxxxx-xxxxx
  -xxxxx-xxxxx
  Microsoft (R) Windows Script Host Version 5.8
  Copyright (C) Microsoft Corporation. All rights reserved.

  (Yes, I used an activation number real not xxxx)

  On a computer running Microsoft Windows non-core, run 'slui.exe 0x2a 0xC.
  004F015' to display the error text.
  Error: 0xC004F015

  When I run
  C:\Windows\System32>slui.exe 0x2a 0xC004F015

  I get a pop up that says that the license of the software service reported that the license is not installed.

  without any indication of which is the problem, I don't know how to deal with.

  Thank you

  Chuck

  Hey Chuck1234567890,

  Please check the following threads who speak the same error code with the installation of the KMS server. There are several suggestions that worked. See the one that helps you get the fixed number.

  Cannot install the KMS for Windows 7 Enterprise key

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/1530dea9-9E42-40E3-b381-7eac11079c23

   

  Problems of KMS server

  http://social.technet.Microsoft.com/forums/en-us/itprovistaactivation/thread/153a2021-01d9-4c5c-968e-68a0b6d84b20

  Not accepting KMS host does not VLK published the KMS key.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/thread/1bbcc441-9988-4283-AE9A-f58a5d100205

  Problem with the product key

  http://social.technet.Microsoft.com/forums/en-us/winservercore/thread/932bd843-7B94-4ADB-9751-2b15f7a238f7

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the 8004FF84 error when you try to download and install an upgrade for Windows

  I can't download and install an upgrade for windows. Try to install the product error code 8004FF84.

  Installation may stop if the system cannot copy files. Here are some possible causes and solutions for this problem:

  Your Windows installation disc is scratched, smudged, or dirty. Clean the disc with a soft cloth, insert it in the CD or DVD drive, and then start the Windows installation again. If your installation disc is damaged, you may need to replace it. For more information, go to how to replace lost, broken, or missing Microsoft software or hardware on the Microsoft Web site.

  Your CD-ROM or DVD drive is not working properly or the disk might be vibrating too much for the laser correctly read data. For more information about this problem, see your hardware documentation or contact the manufacturer of the CD or DVD drive.

  If your computer has multiple CD or DVD drives, your computer may attempt to locate files on the wrong drive. If your computer has a feature to disable CD or DVD drives that are not used, turn off readers that you don't use. Otherwise, try to insert the disc in a different drive, and then restart the installation.

  This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  Wait about 10 minutes to see if the installation continues. Look at the led on the hard drive (often a small light on your computer that blinks when your hard drive is running) to see if there is no activity. If your hard drive seems to be working, the installation must be current. If your hard disk doesn't seem to work, go to step 2.

  Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  If the computer still stops responding during Setup, contact your manufacturer computer or your retailer.

• Get the "Failure" error when you try to perform the V2V with Converter Standalone 5.5.3 conversion

  I'm trying to migrate virtual machines to an older VMWare environment, using a host of ESXi 5.5 (build 1331820), using the stand-alone utility to converter vcenter (version 5.5.3), to a new ESXi 5.5 U2 (build 2068190). The new environment has a server vCenter 5.5 on it and the new ESXi server 5.5U2 has been registered with it.

  Data store sizes are exactly the same on the old and new servers ESXi, just using without separate (the new environment is supposed to be a 100% clean restart for this environment).

  However, when I try to migrate a computer virtual (version 8) of the old environment to the new environment and convert it into hardware 10 version, I get an error of 'Failure' of the stand-alone converter.

  The only line I can find in the error log before the entry of 'failure' is:

  2015 04-14 T 15: 36:01.267 - 07:00 [info 08268 'wizardController"] FillPage()

  2015 04-14 T 15: 36:11.637 - 07:00 [00400 error 'wizardController'] Impossible to submit work: vmodl.fault.SystemError

  2015 04-14 T 15: 36:11.637 - 07:00 [10620 error 'ConversionState'] Submit job failed: a general error occurred: failure

  2015 04-14 T 15: 36:11.637 - 07:00 [10620 error 'ConverterWizardWindow'] next / finish failed: a general error occurred: failure

  2015 04-14 T 15: 36:18.559 - 07:00 [verbose 09980 ' HttpConnectionPool-000008' '] [RemoveConnection] connection removed. CNX: < SSL (< io_obj p:0x0390ff28, h-1, < TCP "0.0.0.0:0" >, < TCP '192.168.0.10:443' > >) >; pooling: 0

  I am confused as to what I should look at, regarding the migration and convering VM from my old environment to the new environment.

  So the problem was with the vCenter Server (appliance version Linux, which is a bit disconcerning) not being is not in the State 'ready' to allow the migration.

  I restarted the vCenter server and everything started working as expected, immediately.

• cannot connect to Disqus or Livefyre since the upgrade to 8.1. Get the 403 error when you try to contact the support of Disqus.

  I can't connect to two Disqus or (apparently) Livefyre. When I tried to submit a report to Disqus, I get a 403 error code. Livefyre, when I make comments, they appear on my screen, but apparently not on someone elses (his repeated requests for a ping to go other reviewers have gone unnoticed). Oh, version 18.0.1, I started to receive cookies, and adblocker plus so that ghostery is set to not block or the other. This problem started immediately after the installation of the v.18.0.1 upgrade.

  Thanks, that seems to have solved the problem of Disqus...

• 10.9.2 upgrade - failure of the "internal error" when you try to start vmware fusion

  Everything worked well even after 10.9.2 upgrade and then all of a sudden, I get an internal error and cannot start.

  Cause I think that lie in the osx system log: /var/log/system.log

  Here are 2 mistakes of the system log which I believe are responsible for this internal error message - I need to know what they mean and how do I workaround:

  These errors are generated in the system log when I click Start on the vmware fusion GUI:

  Mar 21 11:07:43 UserX - macbook.local sandboxd [482] ([21709]): mdworker (21709) deny-read-data file users/UserX/Documents/Virtual Machines.localized/.localized (pre-plugin fstype:hfs fsflag:480 D 000 flags: 250000005E diag:0 isXCode:0 plugin:internalPlainTextImporter uti:com.vmware.vm - package - find suspect using the file: sudo mdutil t 25383633)

  Mar 21 11:07:52 UserX - macbook.local sandboxd [482] ([21709]): mdworker (21709) deny-read-data file users/UserX/Documents/Virtual Machines.localized/.localized (pre-plugin fstype:hfs fsflag:480 D 000 flags: 250000005E diag:0 isXCode:0 plugin:internalPlainTextImporter uti:com.vmware.vm - package - find suspect using the file: sudo mdutil t 25383633)

  When I run the command mdtil sudo as shown above I get:

  mdutil t 25383633 [email protected]/users/UserX:sudo

  / Users/UserX/Documents/Virtual Machines.localized/CentOS 64 - bit.vmwarevm

  If I try to go to this path, there is no: why there?

  [email protected]/users/UserX:CD users/UserX/Documents/Virtual Machines.localized / CentOS 64 - bit.vmwarevm

  SH: cd: / Users/UserX/Documents/Virtual: no such file or directory

  Excerpt from saturated journal:

  [email protected]/users/UserX:tail f /var/log/system.log

  9: Www-Authenticate = < CFString 0x7f80854d74d0 [0x7fff7c286f00] > {content = "Basic realm ="Zimbra""}

  11: cache-Control = < CFString 0x7f80854d0b20 [0x7fff7c286f00] > {content = "private"}

  12: vary = < CFString 0x7f80854d7500 [0x7fff7c286f00] > {content = "Accept-Encoding"}

  }

  }]

  Mar 21 11:07:19 UserX - macbook.local CalendarAgent [459]: [com.apple.calendar.store.log.caldav.queue] [added [< CalDAVAccountRefreshQueueableOperation: 0x7f8083cac3c0;]] [[Sequence: 0 >] missed operations.]

  Mar 21 11:07:23 UserX - macbook.local iTunes [20065]: entry: _AMMuxedDeviceDisconnected, mux-unit: 99

  Mar 21 11:07:23 UserX - macbook.local iTunes [20065]: entry: __thr_AMMuxedDeviceDisconnected, mux-unit: 99

  Mar 21 11:07:23 UserX - macbook.local iTunes [20065]: tid:1be83 - Mux ID not found in the mapping Dictionary

  Mar 21 11:07:23 UserX - macbook.local iTunes [20065]: tid:1be83 - handle cannot disconnect with invalid ecid

  Mar 21 11:07:42 UserX - macbook.local vmnet-bridge [22023]: dynamic store has changed

  Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: VNetUserIf_Create: created the userIf to 0xffffff80292ad800.

  Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: VMNetConnect: return port 0xffffff80292ad800

  Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: Hub 0 there is no memory allocation.

  Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: allocated plate rotating 0xffffff8023a9e000 hubNum 0.

  Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:ef:1 b: 23

  Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: Hub 0

  Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: Port 0

  Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: bridge-en1: dev 0xffffff80269e0ab0 80 2 media family

  Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: bridge-en1: detected wireless interface.

  Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: bridge-en1: upward

  Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: bridge-en1: Home

  Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: VNetUserIfFree: release of userIf to 0xffffff80292ad800.

  Mar 21 11:07:42 UserX - macbook.local vmnet-bridge [22023]: started bridge for 0, en1

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VNetUserIf_Create: created the userIf to 0xffffff8029340800.

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNetConnect: return port 0xffffff8029340800

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: 1 Hub there is no memory allocation.

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: allocated hub 0xffffff8027238000 for hubNum 1.

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:ea:6 d: 50

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: 1 Hub

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 0

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet1: attached with 1 layer of link suspension multicast memberships

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VNetUserIfFree: release of userIf to 0xffffff8029340800.

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: netif-vmnet1: adding Protocol 2.

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet1: could not restore 1 link suspension memberships (err = 102) multicast layer

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: netif-vmnet1: SIOCSIFFLAGS: 0 x 8863

  Mar 21 11:07:43 - last message repeated 1 time.

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VNetUserIf_Create: created the userIf to 0xffffff8037443a00.

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNetConnect: return port 0xffffff8037443a00

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:fd:aa:70

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: 1 Hub

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 0

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 1

  Mar 21 11:07:43 UserX - macbook.local sandboxd [482] ([21709]): mdworker (21709) deny-read-data file users/UserX/Documents/Virtual Machines.localized/.localized (pre-plugin fstype:hfs fsflag:480 D 000 flags: 250000005E diag:0 isXCode:0 plugin:internalPlainTextImporter uti:com.vmware.vm - package - find suspect using the file: sudo mdutil t 25383633)

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VNetUserIf_Create: created the userIf to 0xffffff80292ad800.

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNetConnect: return port 0xffffff80292ad800

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Hub 8 there is no memory allocation.

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: allocated plate rotating 0xffffff802c5f5000 hubNum 8.

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:f9:33:34

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Hub 8

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 0

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNetSetopt: link Set UP State

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VNetUserIf_Create: created the userIf to 0xffffff8033732800.

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNetConnect: return port 0xffffff8033732800

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:e5:cf:2 c

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Hub 8

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 0

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 1

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet8: attached with 1 layer of link suspension multicast memberships

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VNetUserIfFree: release of userIf to 0xffffff8033732800.

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: netif-vmnet8: adding Protocol 2.

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet8: could not restore 1 link suspension memberships (err = 102) multicast layer

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: netif-vmnet8: SIOCSIFFLAGS: 0 x 8863

  Mar 21 11:07:43 - last message repeated 1 time.

  Mar 21 11:07:43 UserX - macbook.local sandboxd [482] ([21709]): mdworker (21709) deny-read-data file users/UserX/Documents/Virtual Machines.localized/.localized (pre-plugin fstype:hfs fsflag:480 D 000 flags: 250000005E diag:0 isXCode:0 plugin:internalPlainTextImporter uti:com.vmware.vm - package - find suspect using the file: sudo mdutil t 25383633)

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VNetUserIf_Create: created the userIf to 0xffffff8036d95600.

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNetConnect: return port 0xffffff8036d95600

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:f0:93:97

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Hub 8

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 0

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 1

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 2

  Mar 21 11:07:43 UserX - macbook.local sandboxd [482] ([21709]): mdworker (21709) deny-read-data file users/UserX/Documents/Virtual Machines.localized/.localized (pre-plugin fstype:hfs fsflag:480 D 000 flags: 250000005E diag:0 isXCode:0 plugin:internalPlainTextImporter uti:com.vmware.vm - package - find suspect using the file: sudo mdutil t 25383633)

  Mar 21 11:07:43 - last message repeated 1 time.

  Mar 21 11:07:43 UserX-macbook kernel [0]: vmioplug: support @ 0xffffff7f85625d00: Info 0xffffff7f856280a8 name com.vmware.kext.vmioplug.12.1.13 Version 12.1.13 build-1398658 to 29 October 2013 18:34:34

  Mar 21 11:07:51 UserX - macbook.local CalendarAgent [459]: [com.apple.calendar.store.log.caldav.queue] [update has failed with the error: error Domain = CoreDAVHTTPStatusErrorDomain Code = 401 'operation could not be completed.] (CoreDAVHTTPStatusErrorDomain 401 error.) "UserInfo = 0x7f8083c8eac0 {AccountName = Yahoo!, CalDAVErrFromRefresh = YES, CoreDAVHTTPHeaders = < CFBasicHash 0x7f8083fa47c0 [0x7fff7c286f00] > {type = dict immutable, count = 11,}

  entries = >

  0: transfer-Encoding = < CFString 0x7fff7cdade70 [0x7fff7c286f00] > {content = "Identity"}

  1: content-Type = < CFString 0x7f80854d11a0 [0x7fff7c286f00] > {content = text/html";} Charset = UTF-8 "}"

  2: connection = < CFString 0x7f80854ee300 [0x7fff7c286f00] > {content = "keep-alive"}

  3: via < CFString 0x7f80854df9e0 [0x7fff7c286f00] > = {content = "HTTP/1.1 calgate006.cal.ne1.yahoo.com (YahooTrafficServer/1.20.13 [s c f])"}

  4: age = < CFString 0x7fff7c268b80 [0x7fff7c286f00] > {content = '0'}

  5: P3P = < CFString 0x7f80854ee210 [0x7fff7c286f00] > {content = "policyref =" "http://info.yahoo.com/w3c/p3p.xml", CP = "CAO DSP COR CUR ADM DEV TAI PSA PSD IVAi IVDi CONi TELo OTPi OUR DELi SAMi OTRi UNRi Puhkekeskus IND PHY ONL JOINED PURE END COM NAV INT DEM CNT STA POL HEA PRE GOV LOC" "}

  6: date = < CFString 0x7f8085492e90 [0x7fff7c286f00] > {content = "Friday, March 21, 2014 02:07:49 GMT"}

  7: server = < CFString 0x7f8085606b60 [0x7fff7c286f00] > {content = "YTS/1.20.13"}

  9: Www-Authenticate = < CFString 0x7f80854c5cc0 [0x7fff7c286f00] > {content = "Basic realm ="Zimbra""}

  11: cache-Control = < CFString 0x7f80854c3e70 [0x7fff7c286f00] > {content = "private"}

  12: vary = < CFString 0x7f80854c4390 [0x7fff7c286f00] > {content = "Accept-Encoding"}

  }

  }]

  Mar 21 11:07:51 UserX - macbook.local CalendarAgent [459]: [com.apple.calendar.store.log.caldav.queue] [added [< CalDAVAccountRefreshQueueableOperation: 0x7f80854dc180;]] [[Sequence: 0 >] missed operations.]

  Mar 21 11:07:52 UserX - macbook.local sandboxd [482] ([21709]): mdworker (21709) deny-read-data file users/UserX/Documents/Virtual Machines.localized/.localized (pre-plugin fstype:hfs fsflag:480 D 000 flags: 250000005E diag:0 isXCode:0 plugin:internalPlainTextImporter uti:com.vmware.vm - package - find suspect using the file: sudo mdutil t 25383633)

  Thanks a lot for your time!

  Best regards

  I ended up doing a resumption of full time machine for 12 hours.

  At least it worked.

  Thanks for your advice

• Get the internal error when you try to debug

  So I have the sdk appropriate for AIR and Flex.  I have the Simulator running in VMWare.  I've tried a few things without success, so I tried the sample Hello World application, but I get this:

  Command line worked, disappointment to have to do it like that, but the command line works for the deployment. Thanks for the idea.

  So to help people in the future:

  My configuration: Macbook Pro, running VMWare to the Simulator

  With the help of sdk blackberry tablet with Flash Builder 4 (with 4.5 sdk that has the AIR 2.5 sdk)

  Launch the debug gives an error internal.

  We're working around to set up your PATH so that you can run the command line generation.

  Documentation says this (don't forget to put .bar for the output_bar_file_name.bar, the second line is the example of cmd line real simply change your ip address):

  blackberry-airpackager -package output_bar_file_name -installApp -launchApp
      project_name-app.xml project_name.swf any_other_project_files
      -device IP_address
  

  blackberry-airpackager -package AIRHelloWorld -installApp -launchApp AIRHelloWorld-app.xml AIRHelloWorld.swf -device 10.0.1.11