Get the following error whent, I turn on my computer: impossible to start application (16) error 3020 Registy asked access denied

Similar Questions

• Get the following error: 0 x 80070005 access denied

  When I try to log on my desktop from my laptop, I get a 0 x 80070005 access denied instead of the log to the screen. Had earlier tried on many occasions, I guess that to open a session with incorrect username. Although it once in a blue moon will give me a log on screen. have you tried the turning off all firewalls and anti programs anti-virus with the same result. Reverse the procedure goes laptop desk is not a problem.

  You have these network?

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Have a read of the link above re Vista file and printer sharing.

  Permissions/Share info is there as well.

  See you soon.

  Mick Murphy - Microsoft partner

• I get the following error when I turn on my computer ' C:\Program data\f10a0075-c31f-4c3d - 9 c 66 - 6aa39dd52db1.dat.

  Original title: rundll error

  I get the following error when I turn on my computer.  I am running VISTA with service pack 2.

  C:\Program data\f10a0075-c31f-4c3d - 9 c 66 - 6aa39dd52db1.dat
  Thanks for the help.

  Hello

  To remove the error message if still there after the controls above to malware.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I get the following errors 2 media loading 1) error: file could not be played &amp; 2) html5: badly encoded video. What should I do to fix this?

  For example, I go to http://jwplayer.com and when I click to see the video I get the following error:
  "Error loading of media: file could not be played.

  Now for the other mistake... I go to a site where the video looks to his will start and it turns white with the error "html5: badly encoded video."

  I went to http://detectmybrowser.com and in the section check the HTML5 video webm and h264 are red (which means that I don't have these plugins that I guess)

  Then... How to fix this?

  Maybe you need this:
  Windows Media Feature Pack for Windows 7 N and Windows 7 KN:

  • http://support.Microsoft.com/kb/968211
  • http://www.Microsoft.com/en-US/Download/details.aspx?ID=16546

• I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B,.

  I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B, which means that it can not read one of the files required to download (update manifest). The recommended windows fix did not work. What should I do? Thanks for any suggestions you may have.

  You can try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Since the change of Tiscali to TalkTalk if I click on links in the emails read on webmail, I get the following error message and then I get disconnected from your

  Since the change of Tiscali to TalkTalk if I click on links in the emails read on webmail, I get the following error message and then I disconnected from TalkTalk webmail.

  HTTP status 404 - /cp/templates/applications/mail/html/null.jsp type status report

  message /cp/templates/applications/mail/html/null.jsp

  Description the requested resource (/ cp/templates/applications/mail/html/null.jsp) is not available. Apache Tomcat/5.5.27

  can you help
  

  Please contact the webmaster. The webmaster will then contact us if they need our help. Thank you!

• On startup, I get the following error: spoolsv.exe - Application error

  On startup, I get the following error:
  Spoolsv.exe - Application error
  The instruction at "0 x 10002837" referenced memory at "0x00000000".  The memory could not be "written".

  Then the print subsystem stops.  Windows update service keeps control and verification.  I let go 20 hours and it is never resolved.  I can't open some applications requiring printers.  Help please.

  Bill

  Hello DragonBill,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Regarding your question, the most common cause of the error is an abundance of. SHD and. Files in the directory of spool SPL.  These files are created by the spooler to save data delayed a print job.  The. SPL file contains the drawing commands and the. SHD file contains information of working parameters the print job.

  To try to correct the application spoolsv.exe error, you must remove these files from the system.  To do this, perform the following steps on your Windows Vista computer:

  1. open the Control Panel, select Classic view, select Administrative Tools and then select Services .

  2. in the Services management console, find the Spooler service, right-click on it and select stop.

  3. then open the folder C:\Windows\System32\Spool\Printers .  (Here, we assume that your Windows is installed in the default C:\Windows folder)

  4. delete all the . SHD and SPL files in this folder.

  5. then open the TMP folder and delete all the old, unused files in this folder.

  6. Finally, restart the spooler from the Services management console service.

  Important note: If you are unable to delete the files in Normal Mode, then you may have to restart your computer in Mode safe to delete files.  To start your PC in safe mode, press F8 when the system restarts, and then select the Mode option safe mode from the Windows Advanced Options Menu.

  If deleting the files do not straighten out the problem, you must perform a system restore and restore your system to the times before when the error started appearing on your computer.  A.m. run the restoration of the system, open Start, all programs, Accessories, System Tools , and then select the System restore option.  On the Welcome to system restore screen, select the restore my computer to a time option earlier and select Next.  In the Select Restore Point screen, select the date that represents the restore point to which you want to restore your computer back, and then select Next.  Finally, check and then click Next again to confirm your restore point and restore of the system.  Restart your computer when you are prompted, and then press OK to close the end of System Restore screen.

  It is important that you know that application errors can also occur because of virus or spyware infections.  In fact, the Spoolsv.exe process is also a known backdoor vulnerability which can be planted on your computer for malicious purposes by an attacker.  Therefore, if you see an unknown process running on your system, you must take appropriate measures to remove them.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• trying to browse some of the sites locally that we get the following error: HTTP error 500.19 - Internal Server Error

  HTTP 500.19 - internal error in the server error

  Hello

  We have Windows 2008 R2 Server, 64-Bit

  IIS version: 7.5.7600.16385

  We had several Web sites for our clients on this IIS server.

  While some of the hosted site work properly, but when you try to browse some of the sites locally, we get the following error:

  HTTP 500.19 error - internal error the requested page server is inaccessible because the configuration data of the page are not valid.

  Hello SGTPrasad

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• I get the following error code 80070bc9 when you try to do window upsdates

  I get the following error code 80070BC9 when you try to do a Windows Update. All of my updates have failed in the last three months and most have failed in the last six months. I found this problem when you try to install Itunes and received the error HRESLUT:0x8007054F. After researching this error, I was sharp may receive updates. Help, please.

  Hello Kristen,

  Follow the steps mentioned below:

  Step 1:

  Temporarily disable or uninstall the security software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Reset components Windows Update the link below:

  How to reset the Windows Update components
  http://support.Microsoft.com/kb/971058

  Note: Click on run in the file download dialog box and follow the steps described in the fix it Wizard.

  Hope this helps

• I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

  I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
  One of the installation files seems to be corrupted. HR:0 x 80070003

  Hello Amawob,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• When I try to send emails via outlook express, I get the following error message:

  When I try to send and email using Outlook Express, I get the following error message:

  The connection to the server has failed. Account: 'HotHot', server: 'smtp.live.com', Protocol: SMTP, Port: 25, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E

  Any help gratefully received. David

  Ok thank you. I received three messages from you, two of the demon and the other Hotmail.

  Hotmail has helpfully includes the originating IP address, so I was able to check further. There is no WHOIS data for it (a bad sign to start), but it is not in the CBL. Read this page to see why it is listed and take the appropriate action. Once you are convinced that your computer - and another using the same network - are clean, you can use the link at the bottom of the CBL page to remove from the list the IP address.

  I still don't know where FCMA comes into it, and diagnostic tests in the NDR is incorrect. It is not the content of the message that is at fault, but I suspect that the block list.

  Good luck!

• While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

  KB952155 Setup Error.

  While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language. Now, that - what it means and how can I fix it? I have installed SP3

  Eivind Aakhus Hello,

  If you have the latest version of Office installed on your computer remotely, then you need to enable the Active X control.

  Follow these steps to activate the ActiveX module.

  a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.

  b. click Tools, point to manage add-ons and then click Enable or disable add-ons.

  c. in the list view, click to view all ActiveX, ActiveX controls downloaded controls.

  d. choose the one you want to activate, and then select Enable.

• I get the following error when I am trying to connect to a network by using different credentials. 1219 system error has occurred.

  Multiple connections to a server or resource shared by the same user

  I get the following error when I am trying to connect to a network by using different credentials.

  1219 system error has occurred.

  Multiple connections to a server or a shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again...

  I don't want to use the IP address. and I don't want to delete all connections using the net use * / delete command.

  Kindly give me the solution as I am now frustrated with this issue.

  Kind regards

  Sajid

  Hello

  ·         Have you tried to access the files that were on Skydrive?

  ·         Did someone else uses your computer?

  From now on, I suggest you try the steps mentioned in the article below.

  Error message when you use user credentials to connect to a network from a Windows computer: "the specified network folder is currently mapped using a different username and password.

  http://support.Microsoft.com/kb/938120

  You can also ask your question in the forum of the Tech Net Windows Server using best.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Hope this information is helpful and let me know if you need additional assistance.

• I get the following error: error \mset16g.dll specified module could not be found. I am running XP on top of vmware fusion

  original tittle:msetg.161

  I get the following error: error \mset16g.dll specified module could not be found.  I am running XP on top of vmware fusion

  Hello Salim'sMailbox,.

  ·         When exactly do you receive the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Response with more information to help you further.