Get the IP addresses of the devices connected to the WiFi network

Similar Questions

• Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

  Hello team,

  Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

  Thanks for help

  LookAtLAN network monitoring is one of these tools.

  SuperScan is probably better, but I have not tried.

• Updated IE7 to IE8 and lost my network connection, get the error "network cable is unplugged" which is not

  After upgrade, network display icon with a red X through it indicating "network cable is unplugged" - which is not.  System Restore gave me back IE7, but without two of the toolbars (I've since found the fix for this - but too late).  Tried a system restore and now completely lost internet connection - IE will not launch.  Always get the message "network cable is unplugged".   I have reset the modem, but nothing works... should I ask Microsoft, HP, or my service provider (Rogers)?

  Thank you

  Christine

  Hello MsC_99

  Check the modem on the back of the system where the cable ether net branch. Think you that shed light on this subject? If this is not the case then you may have a problem with the NIC or ether net cable may have problems. If you do this then try uninstalling and reinstaling the NIC in Device Manager. If you don't see the network adapter in Device Manager then try booing the system BIOS and make sure that he is seen here. Let me know what you find. Thank you.

• OfficeJet 6600 connects to the wifi network

  Hello

  I bought an Officejet 6600 and effortlessly connected to my wifi network, print and scan for a day. And there are two days that he stopped conntecting to the wifi network. In the meantime, our router turned off and turned back on. That's the only difference.

  First of all, the printer would not even detect the wifi network. I solved that by changing the configuration of the router (Cisco 3925 EPC) and passed under the Setup wireless "Wi - Fi protected setup" to "manual". I can now see the network on the printer again.

  But after that I've selected my wifi network and enter the WPA password, the printer tells me that the network connection is impossible. I printed a page of diagnosis, which told me that the problem is perhaps related to the MAC filter. But I have no MAC filters. I also tried to pass of WPA/WPA2 to WPA only, but that doesn't change anything.

  I also tried to set the mode wireless via the USB cable, but no avail. Everything seems to work, until the moment when he tries to connect to the wifi (screen with 'configuration' with the large antenna and pulses of radio waves).

  Should I give up and bring it to the store? I'm getting desperate!

  Thanks for your help in advance,

  Raphaël

  OK, to make sure I understand - the printer connects effectively to your wireless network, and well it works for a while once the printer goes to sleep, your computer or router may not wake.

  If this is the case there are a few things that we can try:

  1. in the settings of your router, make sure that the multicast is enabled.

  2. set the 2.4 GHz router to 11 channels.  I know it sounds weird, but please try.

  3. set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.

• How do I get the WiFi hotspot neighbor list and configure parameters programmatically using WiFi

  I develop for BlackBerry 10 devices and here's my requirment applocation

  1 extract the list of neighbors WiFi hotspot.

  2. get the WiFi connected details (bandwidth, the name of HotSopot etc.)

  3. change and set up the WiFi device programmatically (not manually by the user of the device settings)

  For the details above is it possbile to develop applications using html5 or it required native SDK only?

  If someone possbile please provide some technical details how reach aboe task.

  Thanks in advance.

  I would never recommend something else of the native, take a glance has the lib of wifi service, may be of some use.

  https://developer.BlackBerry.com/native/documentation/device_comm/WiFi/cascades_wifi_overview.html

• Can't connect to WIFI on all locations where the WIFI network is available

  Sometimes my computer will connect and detect the networks without wire, Hotels, airports etc. but do not work in the home and in some offices.

  I run put WXP updated with SP2 have an Artheros5005gs adapter. Any ideas?

  Hello

  It is a matter of compatibility between the WLan router and wireless network card.
  If the wireless network adapter does not support the same Wlan standards then you will not be able to establish the WiFi connection.
  Especially the hotspots (Wlan on airports, city, etc.) are not secure and that is why the laptop automatically connects to these wireless LANs.

  The WiFi network at home or in the office is secure for most and you need a right encryption key to connect to these wireless LANs.

  So I think you should check you settings router WLan configuration and usage of encryption right key, SSID, etc.

• Unable to connect to the WIFI network.

  Original title: Need computer help laptop to connect to the WiFi at home

  I have FIOS at home, but my new laptop is impossible to connect to the WIFI in my house, the diagnostic computer wasn't able to fix the problem, what can I do?

  Hello

  1. what exactly happens when you try to connect to the WIFI network?
  2. do you receive any error messages?

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  If the problem persists, you try the procedure described in the article and check out them.
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

  Alternatively, you can check the link for more information:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
  http://support.Microsoft.com/kb/871122

  Method 3:

  If the problem persists, you can temporarily disable the antivirus software and check.

  (a) click Startand then click run.

  (b) copy and Paste the following text in the box run command and then press enter:

  wscui.cpl

  (c) in the Windows Security window, click Virus Protection.

  (d) if the software is activated, display information about the antivirus program and note the name of the application.

  (e) click Start, click programs principally made and then look for and run the anti-virus program.

  (f) temporarily disable the software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this information helps!

• When you try to use the current content, I get the message "network error."

  My photos open in a mixture, but when I try to use the content aware filter, I get the message "network error."

  Can you please try this: logout and log back? Please let us know if the operation is back to normal. We will fix a bug in this area in a future release.

• restrict the physical size of the wifi network

  Hello

  I intend to cover the building 80x80m by the amount of 1131AG APs and WLC4402 controller. But the strong demand of the customer is to physically restrain the posibilities of the long distance wifi connections (100 m and more building).

  Is there a function in wifi Cisco to drop connections incoming in case if the customer is 100 + m AP? (I mean that the power of the customer is high enough for this)

  What are the regular methods of resricting the physical size of the wifi networks?

  Thank you.

  Someone could be more than 100 meters away using a parabolic grid antenna, and the signal strength is perhaps not different from your regular users.

  You can try using the location device, but I think that even this might go a little goofy, if someone tries to spoof a MAC address.

• L440 kills the wifi network

  Hello

  A few days ago, I bought Lenovo L440.

  I have problem with Wi - Fi. WiFi works perfectly with other devices: phones, tablets, laptops. When I connect to wifi with L440, wifi works from 5 to 30 min. and then crash. L440 kills the wifi network. All devices cannot connect to wifi up until I have to reboot the router.

  I've read about this problem, but I can't find in the Manager of tasks "discovery.exe" or LenovoEMC Storage connector Contral Panel.

  p.s. Win8

  Post what you did to solve the problem. There are a lot of users having problems with wifi to l440.

• Pavilion G6-2005ax, unable to access the wifi network

  Hello

  I was on WiFi from the laptop. But it does not check the Wifi Hotspots.

  and even if it is true, it is impossible to connect to this Wifi network please help.

  I use Windows 7 Basic.

  Hello rjrocks,

  Have a look here http://goo.gl/jcCqx and see if these troubleshooting steps will help solve your problem.

  There are several steps here http://goo.gl/CKicD if the first document does not work.

  Please let me know if this can help,

• MDS is the WiFi networking

  My job application on mode MDS and BIS (IE push and pull)

  Now I have WiFi network...

  is MDS (push) WiFi networking

  Yes. The BlackBerry is trying to keep a tunnel to the BES/MDS via the WiFi network, the network provided allows such a tunnel (whether to the RIM network infrastructure or directly to the router BES/MDS).

• How can I install my laptop to connect to a WiFi network instead of my default dial-up line?

  Hello...

  I have for the implementation of many laptops for a Webinar tomorrow morning; but at least one of these computers keep trying to connect to its range of dial-up default instead of local WiFi Hotspot.

  How can I get this laptop to connect to the WiFi network?  It's an operating system XP, with IE-8.

  Thank you!

  edv7028

  Hey,.

  You can see the article below with the instructions shown on the definition of a default network on your XP machine.

  http://support.MI.RAS.ru/wireless/windows_xp/English/

  I hope this helps.

• How can I see who is connected to my wifi network?

  How can I see who is connected to my wifi network?

  What is the brand and model of your wireless router that produces your Wi - Fi network?

• Why my laptop is not to connect to a wifi network secure?

  My laptop connects to the wireless networks unsecured, but do not connect to secure wifi networks. Is it because he is my Windows 7 Service Pack 1?

  Dear Jessen

  When I changed the password to the default password that has been provided by the manufacturer, it worked.