Get the language of the system

Similar Questions

• Re: How to get the system running again on my laptop satellite

  Everything ok and ongoing run (Vista 32 bit), also installing the update for Intel chipset seemed to agree,
  but subsequently requested reboot does not work... and the horror began :(

  No matter if the hard drive is installed or not, following events occur after passing on: hhd light indicates activity, also for disk hard desinstallion (!), in the possible bios by F2, dvd lamp is lit and portable crashes.

  What has gone wrong? How can I get the system running again?

  TIA

  The whole story is a bit confusing for me. I put t know how you came the idea to update the driver chipset if everything was OK. Vista is old BONES and it is unclear to me that Toshiba has offered some updates of the chipset.

  What is confusing to me is the fact that you can not enter the BIOS settings.

  When you start your laptop you see Toshiba welcome screen and the grey line down with info press F2 to enter the establishment or F12...?

  What will happen after that? Display stays black or what?
  What happens when you press F2, F8 or F12? Everything works? Can enter you in menu start or advanced startup options?

  Try please start your laptop with the recovery DVD and press C repeatedly on startup laptop. Check if the installation of recovery will recognize.
  Post please a little detailed report.

• Key board does not work correctly when you type. Can not get the system restore to work properly, either

  Tried to run the system restore, but it will not restore.

  Hey AnnEdelstein,

  Because you can't get the system restore to work, perform a clean boot on your Windows XP system. The guide to that is here. Which follow, and then try again to Outlook. If it works to the minimum, then boot in the boot, analyse the whole system with your Antivirus and other security you have.
  Also make sure you have the drivers for the keyboard. Search for the manufacturing of the keyboard, and they should have the drivers on their support site. I hope this has been helpful!

• can not get the system restore to work

  tried to get the system restore back to an earlier time. says I need to get rid of the useless programs.did who. I have also some icons for files, tools or downloads

  In addition to what has been mentioned, consider the following:

  First of all, what is the last time that the restoration of the system worked?

  Check your system restore settings:

  1. Click Start
  2. Right click on my computer
  3. Click on Properties.
  4. Click on System Restore
  5. If system restore is enabled, the column status of a player will show surveillance.
  6. If not, you can delete ""disable the system restore on all drives ' and then click on OK to activate "

  Is both as soon as you try to restore to the most recent available? If so, unless you have specific reasons to keep the previous restore points, clean the rest, so that you have the most recent restore point on the left.

  To do this:

  1. run Disk Cleanup

  2. click on more Options

  3. under system restore, click cleaning of

  4. click on OK

  This will free up the space. System restore needs a minimum of 200 MB of space to work.

  Reference: http://support.microsoft.com/kb/300044

  Hope this helps

  Post back if necessary

  _________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't get the system to play a CD in my drive

  Original title: Re: Vista.
  -----

  I can't get the system to play a CD in my removable drive - even if the CD is in the drive.  Does anyone have an idea how I can fix this problem?  First issue of the time.

  Thank you

  Hello

  ·         What is the brand and model of your DVD player?

  ·         It was working fine?

  ·         What changes were made before the grant took place?

  Please follow link below:

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work this is the messege I get: the system cannot find the environment that was entered

  I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work. Cannot change network settings. This is the messege I get: the system cannot find the environment that was entered

  Hi kotipelto.

  To better understand the issue, we need the following information:

  Are what environment you referring?  What did you delete?

  Let us know if you can start the computer in safe mode and works as expected.

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. Boot advanced options, select the menu safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  If you can start the computer in safe mode, perform the system restore.

  System Restore: System Restore to put the computer's system files to an earlier point in time.

  Search the steps mentioned in the link below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-sytem-restore

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to get the system time?

  I want to get the system of unit of bb and information of AM/PM time. Can someone give me some code examples? Thanks in advance.

  Time system is stored as a number of milliseconds from an arbitrary date s in the past. You get this time using System.currentTimeMillis)

  You can extract the various components of the agenda of the time using the Calendar class.

  You can also create a SimpleDateFormat object to format this time for display.

• I can't download lightroom cc because "adobe does not support the system" I use. How the hell am I supposed to know what system he supports and how do I get the system that God Adobe says that I have? Googling lightroom cc requirements made n

  I can't download lightroom cc because "adobe does not support the system" I use. How the hell am I supposed to know what system he supports and how do I get the system that God Adobe says that I have? Googling lightroom cc requirements does not help.

  System requirements | Creative cloud

  The system requirements (lightroom)

• How to get the system on disk vs download upgrade

  I'm trying to upgrade the system 10.8.5 to El Capitan. I'm pretty slow - Wildblue - on access to the internet and my screen shows that it will take 10 hours to download. Ouch, which will use a large part of my available bandwidth for the month.  HOW can I GET the upgrade of the system on the disk to install it manually?  Thank you!

  You can not. Take your MacBook Pro to a place that has a faster internet connection.

• whenever I get the error message and I can not get the system restore or the automatic updates touch

  whenever I try to use the system restore I get the message that it was impossible to restore to dat what I ever try to restore any file were change

  more my automatic updates keep coming up it downloads according to the full upgrade, then the icon disappears, then comes back and he wants

  upgrading again any suggestions

  Hi chuckdutton,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. What is the reason for the execution of the system restore on the computer?

  4. do you have security software installed on the computer?

  5. you receive similar message appears when you try with different restore points?

  There are various reasons for the system restore fail on the computer.

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Also see the article below and check if it helps.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  Refer to the article below and try the steps mentioned, check if that fixes windows update icons that appear on the system tray.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

• How to get the system tray at the bottom of the monitor

  I found that the system tray icons had moved to the right side of the monitor. How do I get back them down

  Hello

  http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar

  Unlock and move the taskbar

  Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.

  Taskbar

  View all

  To unlock the taskbar

  • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

    

    Note

    To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

  To move the taskbar

  • Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

• How to get the system screen resolution

  Hi all

  
  I'm developing a flex application in adobe flex3. When I draw components in the design area flex builder is set to "Fit to window". so application are displayed on my monitor(17") correctly, but when I try to run the same application to another computer or a laptop of 14" display screen is different than the screen of the monitor is short, I need to scroll down to see the full page. My question is how can I make sure that the application should search for uniform on different platform/different browsers and different monitors (regardless of the dimensions of the monitor).

  And how can get the screen resolution of system during execution?

  
  Thanks for all the help and support.

  Look in flash.system.capabilities.  Note that any application based on a browser usually does not control how big be.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• HP mini 3125: get the system off code 63327201 on HP mini 3125 - need password to unlock

  The password in the BIOS of a mini HP 3125, someone entered a power... Need password to unlock... The system disabled code is 63327201.

  @cr47

  Enter 72085827

  Kind regards

  DP - K

• try to get the System Restore Wizard

  I can not enter the system restore.  My camera is broken.  I'm trying to restore.

  Hugh

  Try the last good known Configuration
  http://support.Microsoft.com/kb/307852

  Why do you think that the restoration of the system is the solution to your problem? It may be, but there are many problems that can cause a computer not to start where using the system restore won't help.

  What happens when you try to start your computer? Describe what is happening?

• Get "the system failed due to an unspecified error" + "the system could not log.

  I have a desktop HP with Vista installed.

  I'm unable to open a session in normal mode. I can't perform a restore of the system.

  I can't connect in safe mode.

  All startup repair tests are successful. sfc/scannow and chkdsk do to detect any problems.

  Can someone help me solve this problem?

  Hello

  1. what changes were made before the problem occurred?

  2. How did you do a system restore?

  I suggest you do a system restore using the full version of Windows Vista disk.

  Do follow link below:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think, if this post can help solve your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to get the system user-defined font

  Hi all

  I'm looking for a way to get the font defined by the user in the features of the device.

  My requirment is to check if the user sets the size of the police over 11 or not.

  If the user sets above 11, say to 13 or 14, in my application, I need to change it to 11 vice versa.

  But the application must support the change in size of the font up to 11.

  Please help me through this, if someone has an idea.

  Thank you

  Abhishek

  http://www.BlackBerry.com/developers/docs/6.0.0api/NET/rim/device/API/UI/FontManager.html#setApplica...