Get the massive reading of Balance OHAUS
Hi all
Using the serial port on the back of a balance OHAUS Ranger, I managed to connect to my PC via the USB connection in series. Through Hyperterminal, I was able to get a reading of the mass, as shown in the balance on my computer screen. However, the problem came when I tried to implement a mass reading in LabVIEW (8.6). Attached is a picture of what looks like my code... It is very short, because it's just a test program.
Although I get something on the buffer, it seems it's just unreadable characters refreshing with my set the timer. I put baud rate, parity, and stop about how it is put on the balance. Could someone throw me some tips? I'm pretty new to LabVIEW, so chances are, I'm certainly something to spoil!
Thank you
Justin
Tags: NI Hardware
Similar Questions
-
Portege R830: don't seem to be able to get the fingerprint reader to work
HI - need help.
I have a Toshiba R830 I got "downgrade" to Windows 7 32 bit version pre-installed 64-bit. Long story - but it's the software compatibility.
Despite the download and the installation of what I think is all the relvant 32 drivers - I don't seem to be able to get the fingerprint reader to work.
I downloaded and installed the software fp-sw-201103311304 Tosh - chilled out and tried to install it.
It's actually hard to know if it is installed! I get a window telling me it will extract the file in a directory C:\temp and tells me at the same time that 'tinstallwb.exe' will start once the extraction is complete.
It seems to extract - but I do not see that the installation is happening.
Subsequently it is has that nothing listed in the title of the programs - and nothing "launches."
In Device Manager - I can't see anything that is listed as "fingerprint reader" under security features - the list is TPM 1.2. Not actually sure that is nothing to do with the fingerprint reader - well I've enabled and then disabled via the BIOS.
Am I missing something?
Could the reader [which I have not used since the new - even if it's only 8 weeks] have stopped working?Would be very grateful for pointers.
Try to start the installation manually. On the desktop create a folder unpack and after doing the beginning downloaded exe. Extract the files to the folder unpack and disable command run after extraction.
When files are checked almost open and Toshiba archive extracted file extractor. You will find setup.exe.
Try please to start it manually. -
Compaq nc6400 upgraded xp to win 7 can not get the fingerprint reader to work
I have upgraded xp to win 7, as we will have to do, but can't get the fingerprint reader to work. It appears in the devices that there is one on the machine. I downloaded the drivers for Vista, but they got nowhere. Read in many places as Vista drivers will work but I seem to need more than that. Any clue? Thank you!!!
Hello:
Yes, for Vista fingerprint reader driver is the only one available, but you must install the software HP protect Manager security tools for Windows 7 from the model which succeeded the nc6400, who was the 6910p.
You must also use the W7 driver quick launch buttons.
If your computer laptop bluetooth, you need the W7 bluetooth software and driver...
And you can use the version of W7 HP wireless assistant software.
You can also read the manual tools security protect manager, so you can understand how to use the fingerprint reader.
-
When I'm on a Web page and click on something that I need to register to it appears; also when I was at my college site, I wanted to see a list of my studies of plans he appears so... help
If the error message is Adobe Reader, the simplest thing to do is to uninstall Adobe Reader using Control Panel > add or remove programs, then download and install the version appropriate for your operating system: http://get.adobe.com/reader/otherversions/
The Council on this download page "you may need to temporarily disable your antivirus software": during the installation, not as long as you download.
-
Windows 7 can not get the fingerprint reader to show
I have a T500 I removed Vista and installed Windows 7. But now I can't the fingerprint reader will be displayed at sign in. I think that I have installed the driver, but it does not appear. I went into Device Manager and it seems to be responsible. Any ideas?
You need not fingerprint software from Lenovo. It's just another program that is running in the background.
Windows 7 has all the functions that the software Lenovo offers. Whether you use it or not, it's up to you.
in any case, to get the fingerprint logon to work, you must go into control panel > biometrics. Then you need to check "Allow connections to fingerprints" (or something of the sort). It will ask you to register to use fingers.
The next time you start your computer/log, you will be asked to use your fingerprint to log. It works exactly as it would if the Lenovo program was there (with the sole exception of the sliding-finger-to-boot-computer functionality).
-
How can I get the Adobe Reader software, but NOT the "DC" Cloud version?
For years, I appreciated the help of the original Adobe Reader that would allow me to view PDFs via Windows Viewer or my other software, just, as I used to be able to do. Now, it seems that Adobe requires this convoluted "DC" on users version. I don't want to. I don't need all these so-called features. I don't want to "be in the clouds! -I want just a basic version that allows to display a clean image, strong, with zoom tools, etc.
Where can I get what I need, please? Of course, I hope for a version that has the day in safety.
I will appreciate it if someone would provide a URL to the "appropriate" download location link, unless Adobe no longer provides what some users want or need.
Hi Larry cross,
You can download Adobe Reader XI from the link below:
http://get.Adobe.com/reader/Enterprise/
You must select the operating system you use, the language of Adobe Reader you want to and the version of Adobe Reader (Select 11.0.10).
-
Pavilion dv7 6051ea: how to get the fingerprint reader works on Windows 10
Just upgraded to Windows 7 Pro for Windows 10 Pro. The fingerprintreader has stopped working. I find the possibility to set up, but the installation is grayed out as long as no driver available. Can't find one on any forum support? Anyone else having this problem and sorted it please?
On August 11. I've been running Windows 10 updates on a daily basis since the upgrade and now after a reboot of the fingerprint reader has started working? and remembered my impression as well. I guess that Microsoft dropped in a fix for this (which works for me) then maybe something to try?
-
Satellite A100-062 psaane: can not get the card reader to work
Hiya... Please can someone help?
I try to use my card reader with a Pro duo stick.
I put it in the Pro duo adapter and when I put the card in the slot of the card reader that nothing happens...Thank you in advance if you can help.
cordially imalive
I use the memory stick duo adapter and when I on it on the inside of my Satellite in Windows Explorer is happening again drive (F) and symbol that shows Memory Stick.
Try to please several times to put inside. I remember that in my case it worked after the third time I put it in the slot.
-
Get the Kindle reader to run on HP Slate 10 HD (January 2014)
I tried to get the Kindle software to install on the HP Slate 10. It says version not supported. I've done the update of the operating system as recommended but not luck. I can get clear instructions on how to install and run the Kindle software.
Hi try the following
http://h30434.www3.HP.com/T5/Android-tablets-e-g-HP-slate-7/Kindle-app/TD-p/2873771Amazon needs to update their contact information app on play, but until they install not Amazon AppStore
-
How can I get the numbers read individually rather than a numeric value?
I'm tagging a document for people with visual impairments and when the software reads the document it reads all the numbers in the form of value (i.e. 508 because five hundred eight rather than five zero eight). How to read numbers correctly?
You can nest the sets of numbers within a Span tag and apply the ALT text. For example the sentence 'Section 508 Standards apply to electronic and information obtained by the federal government technology' could be labelled like this, with the Alt text "five zero eight" applied to the Span tag:
Section 508 Standards apply to ...
-
How can I get the Adobe reader 8 lownload?
How can I download the Adobe reader 8?
You can try here
-
Hello.
I am trying to retrieve the number of disk read bytes at a time with SIGAR and I'll have a few unusual results. When I run this code:
Sigar sigar = new Sigar();
Info org.hyperic.sigar.DiskUsage = sigar.getDiskUsage("D:\\"); "
long read = infos.getReadBytes ();
I receive a very large number who is not representative of the use of the disc. Can anyone suggest what I am doing wrong? I would be very happy!
return numbers in the region of:
628467
629786
629514Hello
ReadBytes is a counter, so you'll need to compare the difference over time. For example:
Sigar sigar = new Sigar();long prevTime = 0;
long prevBytes = 0;
final long interval = 1 * 1000;While (true) {}
a long time = System.currentTimeMillis ();
long = sigar.getDiskUsage("D:").getReadBytes();) bytes
If (prevTime! = 0) {}
long = rate (bytes - prevBytes) / ((time-prevTime) / interval);
System.out.println ("bytes per second of disc =" + Sigar.formatSize (rate));
}
prevTime = time;
prevBytes = bytes;
Thread.Sleep (Interval);
} -
Unable to get the fingerprint reader to log on to Windows.
Fingerprints fingerprint driver v.5.9.4
Have the same settings on the driver as in my old T61p...
I am able to use the player to log in to the software it self, but just does not work when you try to logon Windows...
What can be the problem here?
SR
Have you checked the biometrics Windows settings? A bunch of our laptops (Windows 7) did the same thing and all we had to do was check the box "allow the user to log on to the domain using biometric data.
I don't know what has changed: it's a Windows set, not a Thinkvantage. Maybe the Thinkvantage Fingerprint Software uncheck this box when the last update is installed?
-
How to get the balance of an element value
Hello
I have a requirement to obtain related information with balance. I am able to read the information on the element except balance.how to get the value of the particular item balance.
for the application-> transfer and process-> queries with trust-> value the month selected and chosen balances button and queries with the obtained item name break it down the value of the balance.
These values I want in my query.i tried backend with calling package by passing parameters like the number of transfer, balance the id and date but iam getting value "0".
IAM new to hrms, Please help me on how to get this balance of values
Thank you
Hello
It is not very clear what you want to display in the form of balance for a given range of dates.
It depends on how you have configured your balances and periods and balance which you are referring.
The API allows for a given only date that matches the date earned.
Say, for example, that you have a "basic salary" defined with a "Treatment period assignment to Date" dimension and feed of the element that corresponds to the base salary.
"If you need get the 'wage base Total' (balance?) for the period February 1, 2015 ' to March 31, 2015", then you need get dates earned for payroll passes made during that period and call the package above with the appropriate settings.
Another way is by querying the tables/views directly: you can use, for example - it's perhaps easier to your situation:
Select sum (nvl (pbv.value, 0))
of pay_balance_values_v the VB.
where pbv.balance_name = 'base salary.
and pbv.database_item_suffix = '_ASG_PTD. '
and pbv.assignment_id =
and pbv.effective_date between to_date (' 01/02/2015 ',' dd/mm/yyyy')
and to_date (' 31/03/2015 ',' dd/mm/yyyy');
Kind regards
Rajen -
Try to get an accurate reading of the thermocouple
I have connected to OR cDAQ-9174 9201. I have the 9201 an OMEGA TAC80B - k Thermo-to - Analog Converter. I have it connect through sheets bananas with the Red wire to AI0 and com I have a K type thermocouple connected OMEGA. When I run my VI I get strange reading of negative values on the wave of Temp table. I tested the OMEGA with a THERMOMETER, and it works. I don't know what the issue is here. I try to get the temperature reading.
Maybe you are looking for
-
HP dm3t Windows 7 64-bit x 86 RTM ... so, after a clean install of windows 7, I will install the site of broadcom bluetooth software the Installer reports that it cannot find a bluetooth device, and that I should activate the device/turn the device o
-
Put yourself in drive ssd kingstone Lenovo z50-70
Hi, I recently bought a Lenovo z50-70, but I want to replace the hard drive with my fastest ssd. I know how to do, but the question is: How can I do a fresh install of windows 8.1 without losing the original license? He wasn't an inside my pc install
-
Original title: I just installed windows7, I had to uninstall itunes in order to complete the instalation of windows7. everything went well until I tried to reinstall itunes. During this process, I get the message "you don't have sufficient privilege
-
sql question 4.1.1.19.59 of unit test developer
Hello4.1.1.19 version build HAND - 19.59 I had a problem to run the unit tests with exception as expected result. No matter if I say "ANY" or specify an error number. All the tests fail. Must be a bug.Kind regards.
-
marketing / admin password hp pavilion g7
the code is 76815721