Get the message insert the disc of State at startup in windows 7
Original title: How can I remove the status.msi windows 7
Whenever I boot, I get the following message: Please insert the 'Status' disk and click OK. The source of use is 1. I use the Task Manager to cancel but it becomes boring. Any help to remove it would be appreciated.
Try this link:http://www.geekpolice.net/t21995-help-it-keeps-saying-insert-the-status-disk-and-click-ok
Helped?
Tags: Windows
Similar Questions
-
When I try to play a CD or DVD, the door opens and I get a message "insert a support and try. But the anti-virus scan of the device and report No. ERROR. Only play is not possible
When I try to play a CD or DVD, the door opens and I get a message "the drive is empty. Insert media and try. " But many programs, such as antivirus programs analyzing the device and NO ERROR report. It is not possible to play alone. No player of media, including Windows Media Player 11 or Windows Explorer does not recognize the presence of the media. I tried with many CD and DVD that plays normally on other computers with similar OS and also on DVD players.
My computer has Windows Vista Home premium with Service Pack 2.
Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77
Hello
Click right tab taskbar - task - process - make sure WMPlayer.exe Manager, nor any other
the player is responsible - in the affirmative PROCESS END on them and try again.-----------------------
You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.
CD have a tolerance + - and your must read on the edge outside these tolerances of discs.
They may be delivered, but it is generally more economical to replace the disk. Can burn you
a mastered CD and a DVD mastered on this computer and laptop and other computer
machines? Can you do the same on the laptop and play in this machine?Several good info here:
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014===========================================
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
How to get the last DML statement in each block
Hello
How can I get the latest DML statements in each block.
As SYSTEM. LAST_QUERY returns the last select statement, I need to get the last Insert/Update/Delete statement
in each block.
Thanks in advance
RizlyRizly,
You can use the GET_BLOCK_PROPERTY to get the last query executed on this block.
MESSAGE(GET_BLOCK_PROPERTY('
', LAST_QUERY)); Kind regards
Manu.
If this answer is useful or appropriate, please mark. Thank you.
-
Moose title: How can I get the age of Mythology to work on windows vista
every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer
Hi rew55545,
(1) is this problem limited only to the age of Mythology disc?
(2) what version of the game you are trying to install?
Method 1: Run the fixit available in the link below and check if that makes a difference
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Method 2: run the fixit available in the link below to resolve any problems with DVD player.Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 3: Select the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
Spore origans. But they could not get the disc to download
Original title: I installed the origans downloads spores then tried to combine with my set of spore origal disc I can do that I prefer to use my disc that the download, but could not get the disc to download
Windows 7 Edition home premium
Hello
EA Spore games are you referring?
If you are referring to the games EA Spore, I suggest you check the link for support:
-
How to get the game of ball of ink on Windows XP-based computer
How to get the game of ball of ink on Windows XP based computer.
Hello
Also try this freeware site:
http://www.bestvistadownloads.com/download-ink-ball-game-software.html
B Eddie -
Why do I get the error Code 0 x 80010108 on Windows Photo Viewer?
Why do I get the error Code 0 x 80010108 on Windows Photo Viewer?
Your post is the forum for people needing help with http://www.microsoft.com/security_essentials/software program anti-malware for Microsoft Security Essentials (MSE). Your question doesn't seem to be a problem of MSE.
Thinking about ask you for help in the Windows Forum: http://answers.microsoft.com/en-us
If your question is about Windows Live, try: http://windowslivehelp.com/
-
Device, I have an archos 605 WiFi and can not get the Conect to my pc that like Windows 7
I have an archos 605 WiFi and can not get the Conect to my pc that like Windows 7
http://www.ARCHOS.com/support/support_tech/index.html?country=us&lang=en
-
I can't get the first CS5 for import running under Windows 10 .mov files. MOV files will play on Windows 10 direcstly. Can anyone help? I tried quicktime player loading but it will not work with Windowws 10
You need to find an older version of Quicktime, from Apple, to be able to install on Win10
-
I can't get the charger 10 elements to work with Windows 8.1. Is there a solution?
Never mind. I thought about it all. Thanks anyway.
-
The dreaded blue screen on startup with Windows XP
Get the dreaded blue screen at startup. Use Windows XP and my PC of becomes as much as the screen connection, but when I select my login name, that the blue screen appears. If I choose one of the other names the process gets a little further, but the blue screen then appears. I can login in safe mode and that you ran some diagnostic tests, but the problem persists.
As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.
Not knowing the basic information a problem prolongs the frustration and the agony of these issues.
If would know more about your system and that the Blue Screen of Death (BSOD said):
Please provide additional information on your system:What is your system brand and model?What is your Version of XP and the Service Pack?Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)The afflicted system has a CD/DVD drive work?You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?Do you see that you think not you should see and when you see it?What do not you think that you should see?Your system seems to start OK and then crash or didn't he start not at all?If your system works fine, what do you think might have changed since the last time it worked correctly?The next time your system crashes, provide more information on what you see.
Here's a BSOD example showing information you provide:Send for the nose and the Red arrows (3 to 4 lines total).Send all * line STOP message since there are clues in the 4 parameters.If there is a name of the file listed in the STOP message, don't forget to include this information too. -
Hello
From time to time, I'm having a problem with internet access - when, finally, access is allowed and trying to open some websides my computer crashes and I get a message "a problem caused this program blocking interact with windows ' why?
I'm not technically capable, but I did I tried different ways-nothing doesn't. I want to talk about Windows 7 Edition home premium.
At the same time, there is no problem on my laptop which runs under Win XP and with the same internet provider! Any suggestion will be appreciatedOriginal title: problems with Win7 and MozillaFirefox
Hi Ulica,
Thank you to contact Microsoft Community and we will be happy to help you with your concern.
According to the description, it looks like you are facing an Internet problem on the Windows 7 operating system.
It would be great if you can answer these questions to help you further.
1. is the question confined with Mozilla Firefox?
2 are you able to access the same Web site using Internet Explorer?
3. have you made changes on the computer before this problem?
4 are you facing this problem while accessing the secure Web site?
Problem with Internet Explorer, I would suggest trying the following methods and check.
Method 1:
I suggest you add this particular website as a trusted site and check.
To add a Web site to a security zone: http://windows.microsoft.com/en-US/windows7/Security-zones-adding-or-removing-websites
Method 2:
I suggest you to see the steps in the following Microsoft article and check.
Can't access some Web sites in Internet Explorer: http://support.microsoft.com/kb/967897
You cannot connect to or connect to secure in Internet Explorer Web sites: http://support.microsoft.com/kb/813444
Why can't I view some websites? http://Windows.Microsoft.com/en-in/Windows7/why-cant-I-view-some-websites
Note: There are rather than Internet Explorer 9 as well.
Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
Method 3:
Internet Explorer not responding, stops working, or restarts: http://support.microsoft.com/gp/PC_IE_EnvManualID
Note: If the question is limited only with Mozilla Firefox, I suggest you to post the same question in the Mozilla Firefox's Support Forums.
http://support.Mozilla.org/en-us/questions
Hope that the information provided is useful.
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
I get a message from DLL run when starting my laptop with Windows 7
I get a message from DLL run when starting my laptop with Windows 7. One of the messages is: c:\users\xxx\AppData\Local\fgpise.dll. How can I get rid of these messages? McAfee has detected two Trojan horses and withdrawn earlier today. He says that my system is clean now. Did that cause this problem?
Hello
Do not assume that any malware has been removed.
This is probably the result of malware then do a very thorough check and when the system
is clean see the following message to remove this error.If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeRun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
======================================
If necessary AFTER THAT you are sure that the machine is clean of any malware.
How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Get the error when you try to burn Windows 7 pro disc: 0 x 8004005
I downloaded windows 7 Professional (download 2 GB) and when I click on "launch" said to insert the DVD to burn to the disc. I put the disc in, it gets all the way to the end and then gives me this error code: 0 x 8004005 so I can't complete installation. what I'm doing.
Download Windows 7 proper. ISO file
Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.isoAfter you download the .iso file using ImgBurn or gear to create a DVD ISO bootable.
Create a Windows 7 Bootable DVD using the. ISO file
Engraving of a file of Windows 7 ISO on a DVD
http://support.Microsoft.com/default.aspx/KB/977640ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
It supports a wide range of image file formats, and it's free.
(BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
http://www.ImgBurn.com/Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
(The steps are the same, except that you do not create a repair disk but complete an installation DVD)Note: Always use DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.
= Upgrade to Vista =.
First run the Windows 7 Compatibility Checker
http://www.Microsoft.com/Windows/compatibility/en-us/default.aspxWindows 7 Upgrade Advisor
http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15Here are answers to some common questions about the 32-bit versions and 64-bit Windows.
http://www.Microsoft.com/Windows/Windows-7/compare/32-bit-64-bit-FAQ.aspxUpgrade Windows Vista to Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7clean startup in Windows Vista and try the upgrade to Windows 7
http://support.Microsoft.com/kb/929135
(The steps # 1 a, 1 b, 1 c, 1 d and 1e)Disable or uninstall your anti-virus software and firewall temporarily.
How to upgrade from Vista to Windows 7 Home Premium: http://www.howtogeek.com/howto/6892/how-to-perform-an-upgrade-from-vista-to-windows-7/
Upgrade Windows Vista to Windows 7 (custom installation)
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-customAlso: Windows XP to Windows 7 Migration Guide
http://TechNet.Microsoft.com/en-us/Windows/ee150430.aspx= XP update =.
Upgrade Windows XP to Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7How to move from XP to Windows 7 in 4 easy steps
http://www.MakeUseOf.com/tag/how-to-upgrade-from-XP-to-Windows-7-in-4-easy-steps/=============== Keyless Install ===============================
How to make a 'Keyless Install"of Windows:
Boot from the Windows 7 DVD disc, you create and launch the installation.
After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".You now have a 30-day grace period to activate Windows.
During this 30-day grace period you can try to solve your problems.
After you are satisfied with all the problems have been resovled then activate Windows.====================== Device Drivers =================================
Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.
If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersTips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problemsGraphics/video drivers:
Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us= How to activate Windows 7 by Internet =.
1) click Start and in the search for box type: activate
2) click on the 'Activate Windows' option at the top of the list
3) click on "now, activate Windows online.
(4) enter your 25-character product key (not case sensitive)
5) click "Next" and wait for the key must be verified.Another method - to reach a real person:
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxActivation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048J W Stuart: http://www.pagestart.com
-
How to get the disc of recovery for Satellite M50 161
I bought a new Toshiba Satellite M50 161 4 years ago and its been great until recently when he developed serious problems.
I need a recovery disc or the disc of the original for XP software but none of this was supplied with it.How can I get these disks now?
> I need a recovery disc or the disc of the original for XP software but none of this has been provided with it.
I'm in doubt about it. According to the specifications of the laptop Satellite M50 161 comes with brackets to follow:
-Recovery media (CD or DVD)
-Express Media Player
-Additional software CD
-Microsoft Works SuiteAll the old models of laptops come with recovery CD. I have some old Satellite m70 and still have original valuation facilities Toshiba DVD.
Anyway, you can try to contact nearest Toshiba authorized maintainer and ask for help. To be honest I don't think you will get for this older model laptop. For the installation of the OS, you can also use Microsoft installations CD. All the drivers, tools and utilities that you can download at Toshiba page under http://eu.computers.toshiba-europe.com for assistance
Maybe you are looking for
-
Anyone know what is WalletBee_dpalnwb.dmg?
I was updating my flash from adobe and many files downloaded to my computer. I am just checking that they are not spyware or any other bad software. Anyone know what is WalletBee_dpalnwb.dmg? It was one of the files. Here is a screenshot of what
-
Photos 1.3 "JDK 8 Update 73" shows under the 'Import' section on the left. I also have a pop up telling me to install it in safari. Have already installed several times. Any ideas?
-
My C850D Satellite used to power on
My laptop won't turn on. I plug in the power cable and the charging light lights up, press the power button and the white lighy power lights. Then nothing else, he won't do anything other than that. Help
-
hp deskjet 2510 printer does not print
Im trying to print some stuff but its says no paper in the printer, but it is how I fixs do this? and also the bit where the book comes out is open to what is not a reason for which his impression not.
-
Serial bus - bytes to the Port returns with the disabled character of endpoint 0
I'm new to labview... I am trying to connect PC to a hardware device that is customized with a UART (9600 baud, 8 bits, no parity, 1 stop bit, flowcontrol HW). The device works as follows: when a data packet) I designed a simple vi to manage it. As e