get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

Advertisement

Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

This can be caused by the NVIDIA chipset driver:

https://decibel.NI.com/content/message/46299?TSTART=-130

Thank you
Sacha

Tags: NI Software

Similar Questions

  • When you try to uninstall a program, I get the message setup.exe has stopped working, can someone help me with this problem

    I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working

    Hello

    ·         Faced with this problem specific to uninstalling the application with the printer, or with another application?

    ·         What is the brand and model of the printer?

    You can follow the method below and check if it helps.

    Method 1:

    I would say as you put your computer in a clean boot state and check if it works.

    How to troubleshoot a problem by performing a clean boot in Windows

    http://support.Microsoft.com/kb/929135

    Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.

    Method 2:

    I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.

    http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

    Hope this helps,

  • Programs to get forcefully liquidated with user input, on HL2 I get the message: HL2.exe has stopped working.

    Original title: programs get forcefully closed with user entries

    It becomes a common problem. I play the game of Garrys Mod, when its about done with 'send customer... '. "or other words, by sending the list of add-ins to the server, it fogs upward and then an error pops up saying"HL2.exe off work"of such and such, its normal for the program to do and this happens more often and moments later, he continues with normal function, but this time, windows does not allow it.

    Hello
     
     
    1. have you made changes on the computer recently?
    2 is this number reserved only for this game or any other games and programs too?
    Method 1.
    Many users have solved this problem by disabling the DEP (Data Execution Prevention).
    See the Disable DEP for an individual program section in the article below to disable the DEP for this game.
    Change Data Execution Prevention settings
    http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings
     
    Method 2.
    It is a possibility that a third-party application is causing the conflict. Let us try to play the game in the State of clean boot and check if it works very well.
    See the article below for more information and measures.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
     
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I'm trying to uninstall several programs such as pinnacle and I get the message setup.exe has stopped working__it is really frustrating - what someone has any suggestions, I know a little but not an expert thanks Sue

    I have a Dell Vostra 200 running on vista business 32 bit

    Hello

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ===========================================

    After the above, I recommend you use the free version of Revo Uninstaller to remove programs.

    Revo Uninstaller - free version
    http://www.revouninstaller.com/revo_uninstaller_free_download.html

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN

    Then it is ready to be used to remove the programs according to the needs.

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • By updating the Garmin GPS, I get the error "Bootstrapper.exe has stopped working".

    Bootstrapper.exe has stopped working!

    Hello!  I try to update my Garmin GPS and have saved the program on my desktop.  When I open it, the program retrieves and then I get the message: "Bootstrapper.exe has stopped working".

    I searched the internet and forums of Microsoft for answers, but I don't know why this is happening.  I followed an instruction in the forum by changing the setting of the DEP to just windows and programs and do not apply to ALL.  I restarted my computer and I tried to rerun the Garmin update.  I got the message again.  Y at - it somewhere on Microsoft where you can download just the ' Bootstrapper.exe by itself?

    All the updates of Windows and Microsoft are up to date.  I am running Windows Vista Home Premium, 32 bit, pack svc 1 & 2.  Could someone help me please?  I'm pretty knowledgeable with computers, but it frustrated me no end.

    Thanking you in advance,

    stillcrazyat49

    Hello

    1. have you made changes to the computer recently?
    2. the program is already running while update you?
    3. where did you download this update?
     
     
    Method 1.
    I ask you to re - download the update and then try to install it. Its possible this bootstrapper is damaged. If the problem persists, then put the computer in a clean boot state, and then try to update.
    May be a third party application is causing the conflict.

    See the article below for instructions on how to start your computer in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

    Method 2.
    If the problem persists, it is recommended to contact Garmin support and check.
    http://www.Garmin.com/Garmin/CMS/site/us/support/
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

    Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?

    Hi Andy,.

    I checked the reported compatibility list, and the game is listed as compatible.  Work in 64-bit or 32-bit Windows 7?  I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently.  If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem.  Let me know if you've done all that and you still have questions, and we can try something else.

    Kevin

  • I get the message "app Incredimail has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution.

    When I try to open Incredimail I get the message "Incredimail application has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution ', I have used as my e-mail for several years and never had a problem before Incredimail client.  I have gmail for my email.  You are able to help with this problem?  Thank you, June Fleischmann - my email address is * address email is removed from the privacy *

    I suggest to see if there are updates or new versions available for IncrediMail.

    If still no luck, I suggest to ask the support of IncrediMail

    I hope this helps.

    See you soon,.

    J

  • I get the message: HP Advisor has stopped working. I have Vista 32 bit service pack 2

    I get the message: HP Advisor has stopped working. I have Vista 32 bit service pack 2

    Hello

    Contact HP support because it is their software problem

    http://welcome.HP.com/country/us/en/contact_us.html

    or ask in the Forums of HP Support

    http://h30434.www3.HP.com/

  • Error 'setup.exe has stopped working' when installing Quicken.

    Original title: setup.exe has stopped working

    I have read through the related forums and don't think I've seen a solid answer to this problem.  I'm trying to reinstall Quicken on my Dell Inspiron 530 Vista with service pack 2.  (Long and ugly tells how he got deleted at first - thank you, Intuit).

    When I try to install Quicken, I get the above error message.  I tried the clean boot solution; I tried to enter the installation and execution of the exe directly from there; I tried to do a right click to open/run as administrator... etc.

    I have NOT run BigFix.com or other third-party software to solve this problem - I'm very comfortable with another piece of software download and throw into the equation.  What is a corrupted registry and I have TO run third to fix?  Is it a bug of Vista - is there a fix of bug for her?

    I really don't like that to 'guilty' at this point, I just want to repair and recover my electronic payments!  Help, please!

    Hey, Keenon,.

    Please, remove all existing components of Quicken from the computer and do a fresh install.

    Step 1: use QcleanUI uninstall Quicken

    Follow the instructions in the article below for more information on how to use this tool.

    The use of QcleanUI to uninstall Quicken


    Step 2: Install Quicken

     

    Refer to this article for installation help.

    Installation of Quicken on Microsoft Windows 7 or Vista

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Whenever I open my computer I get this message: "explorer.exe has stopped working".

    original title: explorer.exe has stopped working

    whenever I try to open my computer it tells me that windows Explorer has stopped working, everything else works but when I go into safe mode it let me go in my computer and I checked for viruses and there is no someone help me, please to fix this i dnt want to start over and lose everything. hope to hear something back as soon as possible. Thank you and have a nice day.

    Hello

    The computer works fine in safe mode, I suggest you perform a clean boot in order to check whether a third-party program or service that runs in the background is the origin of the problem.

    Refer to this article for help:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135


    Note:
    please check that you put your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • Get the message "McAfee VirusScan has stopped working properly", but I don't have McAfee

    Get the following reports on the problems and Solutions:

    A problem with

    has stopped working properly.

    McAfee, Inc. recommends that you go online on their site to check the latest updates of information support and product:

    Click to go online on the website of McAfee, Inc. for more information and support options
    I have not installed McAfee!

    Hello

    I recommend you perform the clean boot and check the issue.
     
    Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
     
    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
     
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135 
     
    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • Bartshell has stopped working when tried to install EarthLink

    Original title: bartshell

    whenever I try to install my cd of earthlink a small box pops up saying bartshell has stopped working. What does that mean? How can I fix it so I can install my cd.

    Hi nachocheeze,

    1. do you have PeoplePC software installed on the computer?

    We found that the BARTshell.exe is a file from the PeoplePC software. We recommend that you disable all non-Microsoft programs and then try to install the app EarthLink. To do this, try the following steps:
    a. open the article: http://support.microsoft.com/kb/929135
    b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
    c. restart the computer and install the EarthLink software.
    d. Article, follow "step 7: reset the computer to start as usual.

    For further assistance, please contact Team of Support EarthLink

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error message AIOC exe has stopped working when I try to scan on Dell AIO 924 printer

    I recently bought a Dell studio with Vista (old computer ran XP) desktop computer.  I installed my printer and have been able to do print, but not to digitize from all in one centre, get the above error message

    bredenbm,

    We will try to reinstall the printer using the instructions below. This will install the Dell all-in-one Center.

    First of all, make sure that your computer has all the updates of Windows. I've customized those too, especially the .net framework(required to run many applications). Also make sure you have the latest Java. Since you don't mention how the printer is connected, here the basic instructions for this printer.

    Unplug your printer. Download and run this patch to completely remove the printer from your computer. When the correction is over, it will prompt you to restart your computer. There seems to be a lenghty process so please be patient.

    Restart your computer.

    Download the correct drivers.

    XP drivers

    Vista 32-bit drivers

    Vista 64-bit drivers.

    All other drivers

    Install the appropriate drivers. (Install ONLY the drivers you need) You will be asked when connect you your printer (power on)

    In the digitization to the analysis, if you have the disc that came with the printer, and then insert the floppy disk to the printer and stop running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

    Scanning

    Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

    Scan wireless, use the buttons to scan on the printer.

    Rick

  • WMP 11 (vista) every time I go to the library, I get the message "media player has stopped working" help a novice, please.

    I have tried everything I know, that is to say the system restore; uninstall the recent & software downloads. still not good.

    To see which Codec is used

    When reading from the queue on the right, click on it in the current reading pane and choose Properties. On the file tab lists the codecs used. If the current reading pane does not appear right click now plays in the command bar and check to view the list pane.

    Turn off Codecs

    Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

    Launch the program and click on the menu Options - Filter Options and check hide Microsoft entries.

    If you have identified a codec first disable this one. Otherwise, go to the Codecs tab uncheck one by one and see if you can read the file. Restart the Media Player before trying to read the file.

     

    Media Player Fixit

    Click play games, music, or sounds, photos or video and see the Fixit Fix Windows Media Player video and other media or library issues .

    http://support.Microsoft.com/FixIt/

    Registration of Media Player and the removal of the database components

    Try also to record Media Player components and the removal of the database.

    Start - All Programs - Accessories - right on command prompt and choose Run As Administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

    SC Stop WMPNetworkSvc

    regsvr32 "" C:\Program Files\Windows Media Player\mpvis. "» DLL.

    regsvr32 "C:\Program Files\Windows Media Player wmpband.dll"

    regsvr32 "C:\Program Files\Windows Media Player\wmpsyncmgr.dll.

    regsvr32 "C:\Program Files\Windows Media Player\wmpnssci.dll.

    "C:\Program Files\Windows Media Player\wmpconfig.exe" / reg

    "C:\Program Files\Windows Media Player\wmpnetwk.exe" / reg

    "C:\Program Files\Windows Media Player\wmpshare.exe" / reg

    Ren ' %userprofile%\AppData\Local\Microsoft\Media Flash * .wmdb ' *.wmdb_bak

    SC start WMPNetworkSvc

  • Satellite Pro U400 - TrueSuite Manager setup.exe has stopped working

    I have a Satellite Pro U400 running Vista Business (OEM) and at the start of a desktop computer TrueSuite Manager pop-up message appears telling me there is an update to install.

    When I try to install the update, I get a window that says Setup.exe does not work.

    Signature of the problem of the relationship an APPCRASH-is30C0.exe with the exception C0000005 code.

    I tried to uninstall the TrueSuite Manager through Windows uninstaller programs, but get the same message - setup.exe has stopped working.

    Appreciate advice on how to solve this problem.

    Hello

    I think that it is a simple case of corrupted registry entries and files that could belong to the TrueSuite Manager software.

    I agree with the previous user, and I recommend to reinstall this software again.
    You may need to clean the OS before installing the Truesuite again.
    In this case, I recommend the CCLenaer. It s a simple and free tool and can be downloaded on most Web sites.

    Google and you should find more information.

    See you soon
    Jayjay

Maybe you are looking for