Get the phone as it was before I unlocked, possible?
I guess Motorola unlocking is similar to Knox of Samsung, which cannot be reset. But again I ask you, is it possible for me to get my phone to the way it was before I unlocked the bootloader? I know how to lock the bootloader again which is great get a ROM from Motorola signed once again on my phone. But I would like to remove the warning message every time that you start (without having to install a file logo.bin that makes my fastboot appearance and strange behavior and buggy)?
Prosis wrote:
I guess Motorola unlocking is similar to Knox of Samsung, which cannot be reset. But again I ask you, is it possible for me to get my phone to the way it was before I unlocked the bootloader? I know how to lock the bootloader again which is great get a ROM from Motorola signed once again on my phone. But I would like to remove the warning message every time that you start (without having to install a file logo.bin that makes my fastboot appearance and strange behavior and buggy)?
If you want to bypass the warnings that allow a person (if sold or sent repair) that the bootloader has been previously unlocked?
I'm sorry, we cannot help with that here. The process of locking the bootloader is the approved method, but there is no official way to get rid of the message that it has been unlocked. The Qfuse is triggered when unlocked and no way to reset it.
Tags: Motorola Phones
Similar Questions
-
How to get the phone to ring several times before the voicemail picks up
Is there a setting to let the phone ring several times before the voicemail picks up
This option will be controlled by your wireless operator. Contact them to determine whether it is possible to change the response time of voicemail.
-
BlackBerry smartphones can not get the phone to ring
Just installed the new Office update today and she deleted all my previous settings email contacts, etc.. Everything back but cannot get the phone to ring now. Can vibrate and all other settings for volume, etc, but cannot get it to ring. Help! Any ideas?
coldberry wrote:
A reset of traction batteries restored all my previous ringtones and audio settings.
This solution was one that worked for me. Thank you.
-
How to get the phone for example number zero. 0612345678
Dear Adobe Flex Builder Professional,
I have a problem with getting the phone for example number zero. 0612345678
If I get the phone number following as input:
0612345678
I'll get the phone number in output:
612345678
The application was written in Adobe Flex Builder 3.
The code in the MXML file is:
<? XML version = "1.0" encoding = "utf-8"? >
"" < mx:Canvas xmlns:mx = "http://www.adobe.com/2006/mxml"
creationComplete = "init ()" "
horizontalScrollPolicy = "off" verticalScrollPolicy = "off" >
< mx:Metadata >
[Event (name = "customerSaveEvent", type = "events. CustomerEvent")]
[Event (name = "customerCancelEvent" type = "flash.events.Event")]
< / mx:Metadata >
< mx:Script >
<! [CDATA]
Import util.ComboBoxUtil;
Import mx.controls.Alert;
How to import events. CustomerEvent;
Import mx.collections.ArrayCollection;
Import mx.core.Application;
Import valueObject.Customer;
Import mx.validators.Validator;
Import mx.validators.PhoneNumberValidator;
private var phoneCheck:PhoneNumberValidator;
[Bindable]
public var selectedCustomer:Customer;
private function init (): void {}
this.cretePhoneValidator ();
if(this.selectedCustomer == null) {}
this.clearForm (null);
}
}
private function cretePhoneValidator (): void {}
phoneCheck = new PhoneNumberValidator();
phoneCheck.source = phone number;
phoneCheck.property = 'text ';
}
private function validateForm (): void {}
var validatorList:Array = new Array (emailCheck, phoneCheck);
Validator.validateAll (validatorList);
}
private function cancelClickHandler (): void {}
var cancelManageCustomerObj:Event = new Event ("customerCancelEvent");
dispatchEvent (cancelManageCustomerObj);
}
private function saveCustomer (): void {}
validateForm();
var c:Customer = null;
var selCust:Customer = Application.application.selectedCustomer;
If (selCust! = null) {}
c = selCust;
} else {}
c = new Customer();
}
c.setLastName (lastName.text);
c.setFirstName (firstName.text);
c.setStreet (street.text);
c.setPostal (postal.text);
c.setCity (city.text);
c.setEmail (email.text);
c.setPhoneNumber (new Number (phoneNumber.text));
c.setMailing (mailing.selectedItem.data);
c.setComment (comment.text);
var changed: client = Application.application.customerService.createOrUpdate (c);
var customerEventObj:CustomerEvent = new CustomerEvent ("customerSaveEvent", modified);
dispatchEvent (customerEventObj);
this.clearForm (selCust);
}
private void clearForm(selCust:Customer):void {}
if(selCust == null) {}
this.lastName.text = "";
this.firstName.text = "";
This.Street.Text = "";
This.postal.Text = "";
This.City.Text = "";
this.phoneNumber.text = "";
This.email.Text = "";
this.mailing.selectedIndex = 0;
This.Comment.Text = "";
}
focusManager.setFocus (lastName);
}
[]] >
< / mx:Script >
<!-mx:EmailValidator id = "emailCheck" source = "{email}" = "text" property
trigger = '{save}' triggerEvent = ' click on ' /-->
< mx:Form id = "manageCustomerForm" >
< mx:FormItem label = "Achternaam:" >
< mx:TextInput id = text = "{selectedCustomer.getLastName ("lastName")}" / >
< / mx:FormItem >
< mx:FormItem label = "Voorletters:" >
< mx:TextInput id = text = "{selectedCustomer.getFirstName ("firstName")}" / >
< / mx:FormItem >
< mx:FormItem label = "Straat:" >
< mx:TextInput id = text = "{selectedCustomer.getStreet () ' street'}" / >
< / mx:FormItem >
< mx:FormItem label = "zip code:" >
< mx:TextInput id = text = "{selectedCustomer.getPostal ('post')}" / >
< / mx:FormItem >
< mx:FormItem label = "Stad:" >
< mx:TextInput id = "City" text = "{selectedCustomer.getCity ()}" / >
< / mx:FormItem >
< mx:FormItem label = "number:" >
< mx:TextInput id = text = "{selectedCustomer.getPhoneNumber ('Phone number')}" / >
< / mx:FormItem >
< mx:FormItem label = "e-mail:" >
< mx:TextInput id = "email" text = "{selectedCustomer.getEmail ()}" / >
< / mx:FormItem >
< mx:FormItem label = "" unstable: ">"
< mx:TextArea id = "comment" text = "{selectedCustomer.getComment ()}" "
width = "447" height = "144" / >
< / mx:FormItem >
< mx:FormItem label = "send:" >
< mx:ComboBox id = dataProvider = "{Application.application.comboBoxUtil.yesNo"mailing"} '"
selectedIndex = "{ComboBoxUtil.getIndex (selectedCustomer.getMailing ())}" / >
< / mx:FormItem >
< mx:HBox id = "manageButtonBox" >
< mx:Button id = "Save" label = "Opslaan" click = "saveCustomer ()" / > "
< mx:Button id = "resetButton" label = "Wis" click = "clearForm (null)" / > "
< mx:Button id = "cancelButton" label = "Annuleer" click = "cancelClickHandler ()" / > "
< / mx:HBox >
< / mx:Form >
< / mx:Canvas >The code in the SQL file is:
create the customer table)
ID integer not null primary key autoincrement,.
lastName varchar (50),
firstName varchar (50),
Street varchar (50),
City varchar (50),
postal varchar (10),
Telephone INT number (10),
Email varchar (50),
sending Boolean default false,
Comment by varchar (255)
);create table (treatment)
ID integer not null primary key autoincrement,.
Date Date,.
treatment varchar (255),
whole customerId not null,
constraint fk_customer foreign key (customerId) references customer (id)
);create table (user)
ID integer not null primary key autoincrement,.
loginName varchar (50) not null,
lastName varchar (50) not null,
firstName varchar (50) not null,
password varchar (50) not null,
Active Boolean true not null default,
accessright varchar (10) not null
);create table (of the order of the day
ID integer not null primary key autoincrement,.
whole userId not null,
Date Date,.
time integer,
full minute,
Description varchar (50),
constraint fk_user foreign key (userId) references user (id)
);create table (license)
ID integer not null primary key autoincrement,.
key varchar (50),
Val varchar (50)
);I hope someone can help me with this problem.
Hi Buxsnl,
I think that I already gave the answer in my previous post. But think that you have not implemented it.
The threshold of the code is not necessary...
m:System.NET.SocketAddress.ToString (), c.setPhoneNumber (new Number (phoneNumber.text));
Instead you can replace it with the below a...
c.setPhoneNumber (phoneNumber.text);
and the function setPhoneNumber() in your client class must be less to:
public void setPhoneNumber(phoneNumber:String):void
{
//
}
Can send you the code to your client class... ??
Thank you
Jean Claude
-
RMAN-20207: until the RECOVERY WINDOW, which was before the RESETLOGS
Dear friends,
I'm picking up some time and I have used this SQL in my RMAN
reset the database incarnation 1;
run
{
until ' to_date (3 Aug 10 17:50 ',' MON-DD-YYYY HH24:MI:SS') ";
restore the database;
recover the database;
}
and I get this error: RMAN-20207: until the RECOVERY WINDOW, which was before the RESETLOGS
I thought changing the incarnation will solve the problem. I have only 2 incarnations, which is used after that the resetlogs which is number 2. So I now use 1 incarnation.
How should I go about this?
Thanks in advance.
Nithuser645399 wrote:
Moved to Ribbon!Ok...
Now, what you have to do: If you want to point at the time of recovery, you must have a valid backup plus archivelogs in order to recover up to the desired time.
From now on, full backup is available for the time that you asked, however archivelogs not :(
You must make available, controlfile catalogue and begin to restore, recover up to the hour. Then open with resetlogs option.
-
How can I get the phone and messages apps in my dock? And for some reason, I discover now all my app pages from the middle of my phone and not at the top?
Try
Settings > general > reset > reset home screen presentation.
Note: All other applications will be organised by alphabetical order.
-
I am trying to sync my iphone to my computer via i-tunes soft ware. It does give me an option for the phone device. How can I get the phone icon in the menu bar?
Mac or Windows?
-
Get the phone number of the address book on the menu, click
My app (which has no UI) adds a new menu item to the contacts Blackberry address book... Now, if you click on this menu I would get the phone number to contact selected...
I did it with the addition of the menu item... But how can I get the phone number of the address book when you click on the menu?
using code i below contacts called from another application have also recovered the phone number...
BlackBerryContactList contacts = (BlackBerryContactList) PIM.getInstance().openPIMList(PIM.CONTACT_LIST, PIM.READ_ONLY);
But how can I get in my current scenario?
Oops... How did I miss the best way to get the coordinates of the context of the run method (of the added menu) parameter.
-
Hello
I would like to get the phone number of the device by using APIs.
Is this possible?
DK
Phone class
public static String getDevicePhoneNumber (boolean format)
Retrieves the phone number of the device if it is present -
I have a MacBook Air, the BONES of yosemite, the Photoshop 12.0. Adobe Updater tells me that I have an update available (12.0.4). Whenever I try to download the update, I get the error message: "there was an error downloading this update. Quit and try again later. "I tried several times without success. What can I do to install the update? Thank you!
Help > Update function no longer works. You will need to go to updates and download updates for your version and Psalm
I'll help you get started with the CS5 update. Adobe - Photoshop: for Macintosh: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5
Gene
-
How can I get the phone number to speak to someone at Adobe to change my account?
How can I get the phone number to speak to someone at Adobe from my account?
phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
-
How to get the phone's public IP address?
I need to recover the public phone IP address, how do I do this?
Did search you the Forums before posting?
https://supportforums.BlackBerry.com/T5/native-development/get-IP-address-of-WiFi/m-p/2460215#M26157
-
How to get the phone in ongoing call screen
It is a follow-up on the menu of the phone not shown thread.
I checked with the KB and found an interesting topic: How - to upgrade a screen on the main event Thread
My original question (as can be seen in the thread has already been mentioned) was to know how to draw something on the screen of the phone.
Example:
(1) a user accepts a call.
(2) my application implements PhoneListener and in callConnected() just draws a picture on the top of the phone application
(3) all the features of the phone (menu of the phone for example) are preserved.
The article mentioned shows that it is possible to draw something on a screen.
How can I get an instance of the phone screen?
Here is my proposal (but it does not work):
public void callConnected(int arg0){ UiApplication.getUiApplication().invokeLater(new Runnable() { public void run() { Screen screenName = UiApplication.getUiApplication().getActiveScreen(); //Perform screen changes here. Graphics g = screenName.getGraphics(); g.setColor(0xFF8080); g.fillRect(10, 10, 100, 100); //Calling invalidate() on your screen forces the paint //method to be called. screenName.invalidate(); } }); }
How to make the getUiApplication() to pick up the phone?
Do you ever feel like you're talking to yourself ?
That's what I had:
//Calling invalidate() on your screen forces the paint //method to be called. screenName.updateDisplay(); //screenName.doPaint(); //screenName.invalidate();
Why the work of updateDisplay doPaint (as well as his brothers and sisters invalidate()) does not work?
But, alas, my efforts have been in vain.
The 'red square' disappears when something is painted on them -ruins it a bit.
So, I guess, my quest continues.
Someone has an idea how draw a persistent image on the VoiceApp and always to enable all the features of VoiceApp (menu, for example)?
-
Hello world
I have a problem with the installation of the Adobe Pro XI on my computer. I subscribed via cloud.adobe.com to a subscription to the month and paid Friday, July 18.A few months ago, I installed a trial version of Pro XI, which I uninstalled it before running the .exe of cloud.adobe.com. After the executable .exe 100% works, I try to access the app and I'm literally redirected to the Trial version window, which I was informed that, of course, expired a few months ago.
I can't understand how to install the app, I don't have a serial number in my account, which may be a month - to-subscription month.
I tried to contact by phone, according to the order confirmation email, but the phone number is not functional.
Can you please advise on this problem with the installation of the subscription of the month at Adobe Pro XI I meet?
Many thanks in advance,
Alina
There is one thing that you must understand to solve this problem. The trial software is not a different software. The system is not confused about this software to run.
Test software and the licensed software are just the unique software. What has happened is that he does not know your license, then she came to a trial. He has indicated to your license, and he should be back.
Since you have a subscription, hope that you just have to connect (from the trial version) to recover your licensed version.
-
When I close the ms word document I have thi above message. -.
Download updates for
There was a problem with that caused it to stop working correctly.
Your computer may run out of updates that can help improve its stability and security.
Go online to search for and install the Important updates and recommended.
In the left pane, click check for updates. If updates are found, click view available updates.
Select all important updates and then click install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Note
If you have activated the automatic update, you can not see important updates listed. If this is the case, the updates have already been downloaded to your computer.
More information
Please explain and help understand and solve the problem.
To learn more about updating your computer, go to the Microsoft site and read the following article:
Hi nandiniatmasiddha,
1. did you of recent changes on the computer?
2. you only receive the error message when closing Word document?
3. do you have security software installed on the computer?
I suggest that you check and install the updates that are available on the computer, including Microsoft office updates and check if it helps.
How will I know if my computer is up to date?
http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date
Updates: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
If you still get the error message when the Word document is closed then I would suggest that you post your question in the forums of Microsoft office by using the link below.
Maybe you are looking for
-
Satellite P300D - screen flickers and the battery is unstable
I bought the new Satellite P300d-h-13, I liked a lot, but from the first day I have problems with it. 1. when on battery, the screen flickers - it will clear less brilliant, just like I'm shaking the laptop (I'm not :))2. battery is not stable: when
-
want to download win vista business 64 bit and we my 32-bit key, where could I find
switch from 32-bit to 64-bit for windows vista business oem
-
How to cancel events in a published internet calendar?
I use Outlook 2007 and you have subscribed to an internet calendar (which is one of my applications publish). Whenever a previous event of this internet calendar gets canceled, even after the update in my Outlook does not remove this event to my Outl
-
Error 217 at 034acc2a__
How can I fix this on my vista error code for free error code 217 at 034acc2a
-
Best practices for the configuration of virtual drive on NGC
Hello I have two C210 M2 Server with 6G of LSI MegaRAID 9261-8i card with 10 each 135 GB HDDs. When I tried the automatic selection of the RAID configuration, the system has created a virtual disk with RAID 6. My concern is that the best practice is