get the position of the mouse on the screen

Similar Questions

• Everytime I open Firefox 29.0.1 I get the screen crash report why

  Everytime I open Firefox 29.0.1 I Get the screen crash report I want to restore the tabs, as far as I know that Firefox crashed. This started after I upgraded to Ver 29.0.1

  Rather than do a uninstall complete, you can try this:

  Create a new Firefox profile

  A new profile will be your plugins installed by system (for example, Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions or other customizations. It should also have databases of completely fresh settings and cool a cache folder.

  Out of Firefox and start in the profile using Start Manager > Search box (or run):

  firefox.exe -P
  

  Any time want to switch profiles, exit Firefox and return to this dialog box.

  Click on the button create a profile. I recommend using the default location suggested, in other words, do not click the button to choose a different folder. Then launch Firefox in the new profile that you have created.

  If you browse around, exit, reboot, etc, the problem continues?

  When you return to the Profile Manager to return to your normal profile, you might be tempted to use the button to delete the profile. It's a little too easy to accidentally delete your 'real' profile, so I recommend you to resist the temptation. If you don't want to clean up later, I suggest to make a backup of all your profiles first in case something go wrong.

• Equium A100-027: can not get the screen turns off automatically in Vista

  Hello

  Got one of the new A100-027 of the load with Vista a couple of weeks. I can't get the screen to stop automatically when the appliance is left unattended. Standard windows screen saver or power options makes no difference. The screen is always on when I get back to the schedule of the machine later, I don t want to put a 'sleep' mode because the machine is internet access.

  In desperation I changed the option to close the display does not go into mode 'sleep', but it would be nice if the screen would make her s auto off, instead of having to close the screen every time.

  Thank you very much
  Chris

  A bit of an update, I found the screen stops automatically in normal conditions. But then, I leave the computer running a program of file sharing peer-to-peer on the net that he will not cut the screen down. Even minimize the program doesn t allow the screen to close.

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• Unable to get the screen of the internet to cover the entire screen, so cannot enlarge or reduce the size of the toolbar please help.

  No problems with the laptop itself but when get online cannot get all of the coming internet screen it is an empty space on one side and at the top of the screen saver.  Help, please. Thank you /

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  No problems with the laptop itself but when get online cannot get all of the coming internet screen it is an empty space on one side and at the top of the screen saver.  Help, please. Thank you /

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Drag your pointer to the edge and look for the up-down arrows change, then use the mouse to stretch the screen on board.

• How can I get the screen foxfire of origin at the time I opened foxfire?

  Now, I get an advertisement below the place where I enter my question. I had to remove it and return to the original screen life

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• How can I get the screen to stop on the iPad 2 air?

  How can I get the iPad Air 2 to stop turning the screen when I turn the iPad? Thanks for any help!

  Swipe up from the bottom of the screen to bring up the control center. Then press the icon that looks like a padlock inside a circular arrow. It's the lock of course button.

• can not get the screen to normal size

  Okay, so I think that I did by messing around with the ease of access, but my screen is all magnifyed and blown upward and just to big... ive tried to look through everything... How to get back my computer to original size screen?

  Hello

  You need to maybe uninstall and reinstall the graphics card. However, before first try to change the screen resolution and other settings and check if that helps.

  Get the best display on your monitor
  
  http://windowshelp.Microsoft.com/Windows/en-in/help/617624ee-08f3-4AFF-9713-5e84a9674a261033.mspx

  Change the screen resolution
  
  http://windowshelp.Microsoft.com/Windows/en-in/help/0386b009-5F30-45c7-80c8-ff0395cc24091033.mspx

  If the links above do not help, then follow uninstall and reinstall procedure.

  To uninstall and reinstall the graphics card follow the steps below:

  1. Click Start, in the start search bar type Device Manager and then press ENTER.
  2. in Device Manager, you see listed adapter.
  3. right click on the graphics card and then click on uninstall.
  4 restart the computer after uninstalling. Once you restart the adapter will be automatically installed.

  If this does not help, you will need to do a system restore, click the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  
  http://support.Microsoft.com/kb/936212

  Restore the computer to a date or a point when the problem did not exist.

  I hope this helps.

  Peace be upon U.

• How do I get the screen to normal size? How to get the start back to normal size icon?

  Vista Home premium pc / sleep monitor mode zooms in to reduce the size of the screen area work / the start icon and the menus are huge / affecting the visio program for now because I didn't need to check other files

  Hello

  Right click on desktop - customize - display settings - Set resolution.

  Right click on desktop - customize - display settings - top left adjust font size (DPI)

  Your mouse/touchpad probably incorporates a ZOOM to it.

  Hold down the CTRL key and move your central wheel of the mouse.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My screen flipped upside down, so, how do I get the screen to lift the right side?

  Somehow, I've changed my screen is upside down, and I don't know how to restore it.  I looked at the Control Panel, but it's too hard trying to read everything backwards.  How do I change so the screen is right side up.  I restarted the computer, but that didn't help.  Suggestions? And thanks in advance for any help I get.

  Thank you very much.  The first option worked!  Thanks for your help.

  You are welcome.

• How to get the screen back to how it should be as at the present time, it is on the side

  Hello

  Can your hel [, the screen of my laptop is not how it should be and is now on the side as a result of a slip of the hand and a bad button, but we do not know which key it is.

  You can advice how to get on the screen back to normal.

  Kind regards

  Anthony Lawson

  Hello

  Try holding the CTRL and Alt keys, then press the arrow pointing upwards.

  Kind regards

  DP - K

• get the screen on battery/no screen below

  Is there a way to get a screen other than screenBelow battery?

  I want to find the way the more eligant to get a screen two or three down in the stack?

  Any ideas?

  Thank you!

  Hello

  I guess that u don't know the name of the screen class?

  Paul

• How do I get the screen caret coordinates in TextArea?

  Hello
  
  I use a component TextArea and when you write a few words, I want to display a popup with suggestions when the user presses CTRL + SPACE. However, I have not found anything that could give me the caret screen coordinates.
  
  So, how can I find the contact details of caret (I intend to use it in a button event handler), or if it is not possible at the moment, what solution do I have for my scenario? (Please note that I want to show the popup to the location of the caret and not anywhere on the screen, because it would be odd to show it to the center of the text example box).
  
  Kind regards
  subzero
  
  Published by: subzero on May 5, 2013 15:19
  
  Published by: subzero on May 5, 2013 15:19

  I don't see a reasonable way to do it. You can put a feature request in JIRA.

  I have a totally unreasonable, though. The circumflex accent is represented as a path (at least, it is in the current versions of JavaFX I use; 2.2.7 (JDK 1.7.0_21) and 8.0.0 (JDK 1.8.0 ea b87)); and there seems to be no other path in the graphics scene below a TextArea. Then you can simply search through the graphic scene, starting from the text box, until you find a path and then get its coordinates to the screen. It's really a hack; It is extremely vulnerable to changes in the implementation of the way a TextArea component is rendered. The carat has no style class or id is defined, so using textArea.lookup (...) doesn't seem to help.

  Maybe someone can see better?

  import javafx.application.Application;
  import javafx.event.EventHandler;
  import javafx.geometry.Bounds;
  import javafx.geometry.Point2D;
  import javafx.scene.Node;
  import javafx.scene.Parent;
  import javafx.scene.Scene;
  import javafx.scene.control.Label;
  import javafx.scene.control.TextArea;
  import javafx.scene.input.KeyCode;
  import javafx.scene.input.KeyEvent;
  import javafx.scene.layout.BorderPane;
  import javafx.scene.layout.VBox;
  import javafx.scene.shape.Path;
  import javafx.stage.Popup;
  import javafx.stage.Stage;
  import javafx.stage.Window;
  
  public class CaretCoordinatesTest extends Application {
  
    @Override
    public void start(Stage primaryStage) {
      final TextArea textArea = new TextArea();
      final BorderPane root = new BorderPane();
      root.setCenter(textArea);
  
      final Popup popup = new Popup();
      popup.setAutoHide(true);
      VBox suggestionBox = new VBox();
      suggestionBox.setStyle("-fx-border-color: -fx-accent;");
      popup.getContent().add(suggestionBox);
      suggestionBox.getChildren().add(new Label("Here are some suggestions:"));
      for (int i = 1; i <= 10; i++) {
        suggestionBox.getChildren().add(new Label("Suggestion " + i));
      }
  
      textArea.addEventHandler(KeyEvent.KEY_PRESSED, new EventHandler() {
        @Override
        public void handle(KeyEvent event) {
          if (event.getCode() == KeyCode.SPACE && event.isControlDown()) {
            Path caret = findCaret(textArea);
            Point2D screenLoc = findScreenLocation(caret);
            popup.show(textArea, screenLoc.getX(), screenLoc.getY() + 20);
          }
        }
      });
  
      textArea.addEventFilter(KeyEvent.KEY_PRESSED, new EventHandler() {
        @Override
        public void handle(KeyEvent event) {
          if (popup.isShowing()) {
            popup.hide();
          }
        }
      });
  
      primaryStage.setScene(new Scene(root, 600, 400));
      primaryStage.show();
    }
  
    private Path findCaret(Parent parent) {
      // Warning: this is an ENORMOUS HACK
      for (Node n : parent.getChildrenUnmodifiable()) {
        if (n instanceof Path) {
          return (Path) n;
        } else if (n instanceof Parent) {
          Path p = findCaret((Parent) n);
          if (p != null) {
            return p;
          }
        }
      }
      return null;
    }
  
    private Point2D findScreenLocation(Node node) {
      double x = 0;
      double y = 0;
      for (Node n = node; n != null; n=n.getParent()) {
        Bounds parentBounds = n.getBoundsInParent();
        x += parentBounds.getMinX();
        y += parentBounds.getMinY();
      }
      Scene scene = node.getScene();
      x += scene.getX();
      y += scene.getY();
      Window window = scene.getWindow();
      x += window.getX();
      y += window.getY();
      Point2D screenLoc = new Point2D(x, y);
      return screenLoc;
    }
  
    public static void main(String[] args) {
      launch(args);
    }
  }
  

  Edited by: James_D 5 may 2013 18:04

• How to get the screen coords of the node?

  For example, TextBox in VBox inside TabPane tab.
  Is it possible to obtain or calculate the screen from any corner of the TextBox element coordinates?

  I don't know how this will work because I think it does not account for the title of the window, but here is a code to help you get started.

  double screenX = node.getScene().getWindow().getX() + node.getScene().getX()  + node.localToScene(0,0).getX();
  double screenY = node.getScene().getWindow().getY() + node.getScene().getY() + node.localToScene(0,0).getY();
  

• Satellite Pro P100 can not get the screen to work again

  If someone could point me in the right direction, I would be very grateful!

  I bought a monitor to use when I am in the office (it's a LG Flatron L225WT), installed the software that came with it and plugged. Nothing seemed to happen, then in Toshiba HWSetup, I changed my power on the screen 'LCD + Analog RGB'.

  To cut a long story short, the external screen works perfectly now, but I cannot access the internal screen, even after changing the power supply on the display to 'Automatic Selection '. The Fn + F5 key does not appear to have any effect at all.

  I must have inadvertently done something to mess up the computer. Can anyone suggest how I could reset it back?

  TIA to all who can help you!

  -Laurence

  I put t know what laptop you have and don t know what OS you are using, but it seems that you have managed to set the external monitor as the main screen.
  You should change in display properties (right click on desktop-> properties)

  Somewhere in the settings, you should try to score the internal display (1) and should mark use this device as the primary monitor

  You won't find any similar settings or this will not help then set the operating system to the point of time at the beginning. In this case all settings will be reset!

• Can you get the screen is on-air on the classic to display on a second screen?

  OK long shot and I think that I I already know the answer is no, but here's what I want to do:

  I will be installing an iPod interface to my OEM car stereo, with control of load and playback via the car stereo/CD changer port. -No info on track return to the display of the car in this solution.

  The ideal solution is to hide the iPod in the armrest, run a video of small groups of power for a 4.3 "TFT LCD that I also use for a backup camera (two screens of entry)

  Ideally this second screen would display the same "screen is on the air than the iPod as well as works of art news and artist of the normal Beach/album.

  I'm very technically competent and capable of doing custom wiring, but I'm after a bit of feasibility info!

  Doubtful, although probably not impossible given enough skill and technical expertise.    But the iPod is not in a usable state easily; the case would open with fortune son hanging out of him.

  You can transmit a composite video signal on the dock, use connector of this

  http://www.Apple.com/shop/product/MC748AM/A/Apple-Composite-AV-cable

  but it is to show a video or a slide show, do not for the mirroring of what is on the screen of the iPod.