Get the right order of tones for DTMF decoder

Similar Questions

• Is it true that your iphone charger will get the right amount of volt for your iphone

  because I bought my iphone in US 6 and I am here in the philippines and im worried recharge my iphone if America and the philippines have different power

  The charger auto-pass between the two. You're OK to load it.

• Where can I get the right drivers for Satellite Z930 - PT23LA - 01 009?

  A little history: I recently bought a version of Win7 to a Z930 in Auckland from PB Tech shop. I've updated to a clean version of Win8 64-bit. My Win8 seems works ok but I noticed something strange in the Toshiba PC Health Monitor - apparently the Toshiba HDD/SSD Alert is not installed, so I don't understand not his iconic display in the health monitor (but the health monitor think my SSD is in "Good" shape - maybe it's reading the INTELLIGENT of my SSD interface, or maybe it's just saying 'Good' because the integrity monitor is apparently able to operate?)

  I can easily find different versions of the Toshiba HDD/SSD Alert Utility in questionable Web sites - download, but I really prefer to get my Toshiba support drivers. Which leads to my question:

  Where can I get the right drivers for PT23LA-01 009? NZ nor the webarea to Toshiba support have this model in their menus. The closest match seems to be

  http://www.MyToshiba.co.nz/support/computers/Ultrabook/satellite-z930/pt23la-01f00n/download?OS=30

  There is probably not much difference between a PT23LA-01F and a PT23LA-01 P but it is a bit of concern to be download & install the drivers for a chip that is no my model...

  See you soon,.
  Clark

  PS: http://forums.toshiba.com/t5/General-Features-Knowledge-Base/TOSHIBA-HDD-SSD-Alert/ta-p/347120 advise me the area downloads for Toshiba support. He also advises "not all utilities are available for each model and operating system. During the installation of utilities, install the TOSHIBA value added first. "Sigh... so maybe my problem is that I installed the Win8 drivers & utilities order when build my own-building a Win8 pass win7? Wouldn't surprise me in the slightest... but if this is the case are here all other dependencies in these built?

  > Where can I get the right drivers for PT23LA-01 009?

  First series of Toshiba laptops (Australian, European, etc) is very similar to the other
  Your model of laptop Australian Satellite Z930 * PT23LA * series is the same as the European model Satellite Z930 * PT23LE * series.

  That's why the drivers, tools and utilities published for Satellite Z930 * PT23LE * series must be compatible with the Satellite Z930 * PT23LA * series.

  To get all drivers for Satellite Z930 * PT23LE *, you should check this page:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU

  There, you can get all win 8 - upgrade the drivers. Also the HDD/SSD Alert Utility v3.1.64.14

  Welcome them

• Win version first elements 14 rather than Mac version you downloaded. Serial number does not work. How to get the right serial number

  Win version first elements 14 rather than Mac version you downloaded. Serial number does not work. How to get the right serial number?

  It is unclear what problem you are facing... the wrong version or the wrong serial number.  The serial number is likely for the other version.  You don't want the serial number of Windows or the Mac version?

  One of the following conditions may be useful...

  You can exchange languages/platforms for a newer version product if you follow the instructions on the following link:

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Order-Product-Platform-Language-swap.htm

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• Qosmio-F750-10N and Win8.1 - were not able to get the right BT drivers

  Hello

  Since upgrading my HARD drive and installing Windows 8 (.1), I was not able to get the right drivers for my Qosmio F750-10N Bluetooth.

  If I go through the section of drivers download site, the drop-down boxes of language and the region appear to be defective, so it shows me all the drivers.

  Tried to install a Toshiba Bluetooth stack generic but it doesn't seem to be able to recognize my Bluetooth device. Also tried to go through the Atheros website without much luck.

  Please could someone help or maybe post a link to a download mirror.

  Thank you very much.

  Hello

  First of all, it seems that the 8.1 win is not supported for Qosmio F750.
  So I might be difficult to operate BT

  However, AFAIK the Qosmio F750-10N was equipped with an Atheros AR9285 Wifi/BT card.

  This means that a single module shares the WiFi network and BT and you need to install the Atheros BT filter driver.
  Next to the BT filter installed, must install the driver of Toshiba system to win 8.1
  The pilot of this system must be installed before the filter of BT driver.

  But like I said: 8.1 win is not supported for this Qosmio unit and you won't find drivers Win 8.1 download section in the driver F750.

  But you should try the drivers released for the other, more recent Qosmio series; i.e. X 870

  Good luck

• Why my any CD not play not back in the right order?

  I have a CD very good test of Alan Parsons and Stephen Court called "Sound Check 2. I wanted a digital copy to back up my CD.

  I have set iTunes to import the CD using Apple Lossless and Gracenote found all this info to track for me. I used my 1.83 Ghz Core Duo Macbook Pro to import from my recent iMac doesn't have a disc. The MBP running the final version of Snow Leopard, as well as some version of iTunes that supported.

  Import took place without a hitch, but when I tried to play the tracks in good condition, it jumps around in the album. I tried the remedies "from the Album", played with crossfade, nothing is done. The nature of this CD its extremely important to play in the right order, as each track leads to another by a reading of the word of the next title at the end of the previous track.

  What can I do to ensure that it renders properly? Also, is there some kind of sort order, I can add to track data that will ensure that these tracks are in the right order if I decide to put them on a stick for my cars?

  You have shuffle turned on by accident? May seem like an easy solution, but a lot of people miss it.

• Burning a cd picture with photos in the right order

  I'm trying to burn a cd of photos using Windows Live Photo Gallery. I have no problem with the actual combustion, however they do not come out in the order I want what they. The record, that I choose to burn is in the right order by date, time, name, but one burned time and I play on my dvd player, they are not in the right order. How can I fix this?
  Thank you.

  I followed the instructions in the link you provided. Double checked them and they will be all renamed starting with the first image file Name.jpg according to numerical order, the 2nd picture of the group is the name of (1) .jpg file, 3rd picture is the name of the file (2) .jpg and so on. These were numbered automatically, but first of all, I made sure that they were displayed in the order that I wanted them. I have clicked on and highlight the first photo, press and hold the SHIFT key pressed, clicked on the last image in the file, once all selected / highlighted, right click on an image, choose 'RENAME', typed in the name of the file, press ENTER. The first image of thought would be (1), but was just .jpg and then all the other images were numbered. Have not had time to read everything in the directions of operation Panasonic Blu - ray, but see nothing on playback in random order for still images.

  =====================================
  If you are dialing as my example you will have better results.

  And no.... don't right click on 'everything' photo... the 'first' photo is
  one you want to right click on.

  If rename you batch and use the following number on the
  first file... the sequence should follow correctly when you press
  Come in...

  (10001) .jpg (you can enter a group name and a space
  before the number if you wish) summer vacation (10001) .jpg
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Where can I get the SRS Premium Sound Technology for my g7-1365dx

  I recently did a clean installation of Windows 8 on my HP Pavilion laptop 1365dx g7. I would like to know where I can get the SRS Premium Sound Technology for it. (the same one that was / is on my Windows 7 Home Premium)

  * I am dual-booting Windows 8 and my original Windows 7 Home Premium. Can I extract the files of this installation? *

  Any help would be greatly appreciated. In addition, I want to get all software of this facility (YouCam full HP Software Wizard, etc.)

  Thank you

  Stan [personal information deleted]

  If you want to install any software supplied with unit, then you will need to find the swsetup folder. To find the right folder program, will make you more than likely need to try running Setup in each file to find what you are looking for. The installer must list what it is and it can be cancelled. Some may have a file readme.txt as well, so this could be another way, if it is present.

  If you go to the folder of the application via the context menu, it will take you to the program folder files, that it has been installed. I can't guarantee a functioning copy / paste from there. Some programs must go through the registry to create a registry key to work and this is done during the installation process. Honestly, you should be able to access a partition from Windows. The partition of Windows 8 should be accessible from Windows 7 and the Windows 7 partition should be accessible from Windows 8.

• How to check interlaced fields are in the right order?

  I made a DVD interlaced in first. When I look at the video back exported, interleaving doesn't seem to be in the correct order, but I can't tell for certain.

  Other than conjecture, is a good way to check for certain, that the fields are in the right order? My Media Player does not play an image all at once, and I can't study the individual fields.

  Also: If you had a project that combines two videos from the field source levels? The correct procedure would be to move one of the videos upwards or downwards a pixel?

  You can do that in first, by selecting the view field under the key in the program window.

• I can't get the file number I need for the license transfer process. Help, please.

  I can't get the file number I need for the license transfer process. Help, please.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Get help from cat with orders, refunds and exchanges (non - CC)
  http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

• seems that I bought the wrong size stock photo because it shows the low resolution 20 x 30... How can I return it and get the right kind of photo?

  How can I return it and get the right size stock photo that actually works to post 20 x 30

  Hi Debbie,.

  Once that the photos were allowed, they cannot be removed or not allowed.

  Thus, you must make sure that the image you need for your projects. You can also check the size of the images before their approval.

  Hope that answers your question.

  ~ David

• Get the matrix of global position for each character of text

  This message follows this related post.

  I need to get the position and orientation of the first and the last character in a text frame art, in other words, I need its matrix.

  There are a number of functions of the API that is supposed to help you; An excerpt from the ATESuites.h file

  / * Return of this race transformation matrix.

  The returned array spesify transformation complete the given execution.  You must transform the original by IGlyphRun::GetOrigins() and

  Concat with ITextFrame::GetMatrix() in order to get the location of the glyphs.

  */

  ATEErr (* GetMatrix) (GlyphRunRef glyphrun, ASRealMatrix * ret);

  Therefore, get the matrix of the first character or glyph should look like this:

  AIErr

  VMGetFirstTextMatrix (AIArtHandle textArt, AIRealMatrix * matrix)

  {

  ASRealMatrix frameMatrix, glyphMatrix;

  ASRealPoint firstPoint;

  Try

  {

  TextFrameRef ateTextRef;

  sAITextFrame-> GetATETextFrame (textArt, & ateTextRef);

  TextFrame ITextFrame (ateTextRef);

  ITextLinesIterator lnItr = textFrame.GetTextLinesIterator ();

  TxtLine = lnItr.Item () ITextLine;

  IGlyphRunsIterator grItr = txtLine.GetGlyphRunsIterator ();

  GlyphRun IGlyphRun = grItr.Item ();

  IArrayRealPoint pointArray = glyphRun.GetOrigins ();

  firstPoint = pointArray.Item (0);   dating bad values!
  

  frameMatrix = textFrame.GetMatrix ();

  glyphMatrix = glyphRun.GetMatrix ();

  Scissor-> AIRealMatrixConcatTranslate (& glyphMatrix,

  (firstPoint.h, firstPoint.v);

  Scissor-> AIRealMatrixConcat ((AIRealMatrix *) & glyphMatrix,)

  (AIRealMatrix *) & frameMatrix,.

  matrix);

  return kNoErr.

  }

  catch (ATE::Exception e)

  {

  return e.error;

  }

  return kNoErr.

  }

  But the coordinates is returned in frameMatrix (tx and ty) or the firstPoint are clearly wrong. It seems they have a lag that is allmost constant.  The values of x are about 7664 too great points (give and take a few decimals), and values are about 7893 too large (also give and take a few decimals).

  I'm puzzled by this, reall because I need to get precise positions...

  Well, it worked eventually.

  The ITextFrame::GetMatrix() method generally returns an identity matrix, unless I moved or transformed the object frame of text on the artboard.  For example, if I duplicated a text image object by dragging the object while pressing the alt key, this matrix will be transformation relative to the object that it was created. Since it is a relative transformation, it is not hard or soft coordinates, so it is foolish to harden or soften (in fact, you shouldn't do).

  Then the IGlyphRun::GetMatrix() method typically returns the identity matrix, but will contain a rotation for example, if the object is a text on a path.

  Finally, the IGlyphRun::GetOrigins() method returns hard coordinates for each glyph, but without the frame matrix transformation.  This method is insensitive to the GetCoordinateSystem / SetCoordinateSystem functions of the following system and returns the hard coordinates launch.

  Thus, in order to get the actual art contact information for the Board of Directors of a glyph, the following code will do:

      IArrayRealPoint pointArray = glyphRun.GetOrigins();

      AIRealPoint firstPoint = pointArray.Item(0);

      AIRealMatrix frameMatrix = textFrame.GetMatrix();


      sMath->AIRealMatrixXformPoint( &frameMatrix, &firstPoint, &hardPoint);


      sHardSoft->AIRealPointSoften( &hardPoint, &glyphPoint);


  In order to obtain the matrix of the absolute position of the first glyph of an art of text frame, the following function seems to work:

  AIErr

  GetFirstTextMatrix(  AIArtHandle textArt, AIRealMatrix *matrix)

  {

      ASRealMatrix frameMatrix, glyphMatrix;

      ASRealPoint firstPoint, softPoint, hardPoint;

      try

      {

          TextFrameRef ateTextRef;

          sAITextFrame->GetATETextFrame( textArt, &ateTextRef);

          ITextFrame textFrame( ateTextRef);

   

          ITextLinesIterator lnItr = textFrame.GetTextLinesIterator();

          ITextLine txtLine = lnItr.Item();   

   

          IGlyphRunsIterator grItr = txtLine.GetGlyphRunsIterator();

          IGlyphRun glyphRun = grItr.Item();

   

          IArrayRealPoint pointArray = glyphRun.GetOrigins();

          firstPoint = pointArray.Item(0);

          sHardSoft->AIRealPointSoften( &firstPoint, &softPoint);

   

          frameMatrix = textFrame.GetMatrix();

          glyphMatrix = glyphRun.GetMatrix();

   

          sMath->AIRealMatrixXformPoint( &frameMatrix, &firstPoint, &hardPoint);

          sHardSoft->AIRealPointSoften( &hardPoint, &softPoint);

   

          sMath->AIRealMatrixConcat( (AIRealMatrix*) &glyphMatrix,

                    (AIRealMatrix*) &frameMatrix,

                    matrix);

   

          matrix->tx = softPoint.h;

          matrix->ty = softPoint.v;

   

          return kNoErr; 

      }

      catch (ATE::Exception e)

      {

          return e.error;

      }

  }

  But, this has not come easily, and I must be allowed to blame poor documentation on this subject...

  Agnar

• VISA do not read serial data in the right order

  Hi all

  I'm working on a project, when I need sample data at point A, it passes these (zigbee) wireless data to point B and here rs232 connection to the laptop.

  I'm using labview 2011 to view sampled data, but I have a little problem, data are not entered into labview in the right order and this is quite crucial in my application. I have attached some photos and my vi to describe the problem in detail.

  Data are packaged in the following form: AS:number1:number2:...:number49:\r - where is the beginning, followed by the values of the sample character separated by: and the last is followed by a return at the end of the cart package.

  When I view the data in different terminals (PuTTY, tera term ect.) then the data is in the correct order.

  To make the most obvious problem, I place the sampling to count an integer of 16-bit instead of the real samling

  The png sample of teraterm is how it is supposed to look like. The vi_sample.png is the string of labview, which is false, I've highlighted a few errors in the visample. When using the VI, I noticed that all the data is collected, but not in the right order.

  The missing Subvi is a few small VI that reads the input rs232 string and control the various indicators of this.

  I hope that you are able to help me with my problem.

  Concerning

  Tommy

  In the structure of case where read you the serial port you are adding at the beginning of the string rather than allow the addition. In other words, you build the answer backwards.

  Your method of reading is contradictory. You have configured the VISA session to stop playing when he sees a carriage return, but you do not actually. You have configured it so tell some bytes are on the serial port. Maybe it's not the set of bytes, since you have no delay between writing and reading, so you can be is only half of the message. If you use the method of termination, then reading VISA should have great value wired to the bytes to be read. Then, when VISA Read see the stop character, it will stop automatically. If you use the bytes available, then you need a mini loop to keep reading until you see the end of the response. Choose one or the other - don't try to play both ways.

• Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed.

  Generic host win32 problem...

  HI, I have soundcards XP SP2, version 2002. Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed. After all that, my internet stops working and against hepatitis a to erboot to make it work again. Help, please

  Hello

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• When trying to start the disk check procedure, I get the answer, "cannot open volume for direct access. How can I fix?

  I get the above answer everytime I turn on the computer. (This is with AutoCorrect blocks checked). If I leave blocks unchecked, it follows a procedure 3 pass without rebooting and does not produce a result.

  * original title - to try to start the procedure of checking disk I get the answer, "cannot open volume for direct access. How can I fix? I ran the GET Microsoft virus check tnd an own result.*

  The application-specific permission settings do not authorization for the application server COM with the CLSID
  {DCBCA92E-7DBE-4EDA-8B7B-3AAEA4DD412B}
  the user NT AUTHORITY\SYSTEM SID (S-1-5-18). This security permission can be modified using the Component Services administrative tool.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_comp_exp.mspx?mfr=true

  In the opposite case

  http://blog.ray1.NET/2008/01/WinXP-SP3-DCOM-system-error-dcbca92e.html

  http://TechNet.Microsoft.com/en-us/network/bb545879

  http://www.blackviper.com/wiki/Network_Access_Protection_Agent