Get time in hh:min

Similar Questions

• Daylight Saving Format Date/Time String vs get time in seconds

  Hi all

  I have developed a real-time application using a cRIO 9074 which has two loops. The first gathers data and records the time using the module of ' string of Format Date/time ' with the following time sting: '%d/%m/%Y % H: %m ". The output is a sting with mouth/day/year hour: minute.

  The second loop Gets the cRIO time using the module "get Date/Time in Seconds ' and the output of timestamp is sent by a shared variable for an application that is running on a local computer.

  The problem started Sunday last with DST. With the help of MAX I am able to see that the time of cRIO is bad (1 hour less) and that him "automatically adjust clock for daylight saving time" is not checked and gray, so I am not able to change it.

  The time of the first loop by using the "Date and time Format string' returns the time elapsed between the cRIO (1 hour late), however the time of the second loop is OK. I have manually corrected time using MAX, so now the first loop is correct, and the second is now over an hour.

  Any ideas?

  Dear RavensFan, thank you very much for your answer.

  However, this was not the problem. Apparently the result with or without the element of DST is the same. I solved the problem, for now, by changing a parameter not on the function "get Date/Time in Seconds" but on the time stamp indicator.

  By right clicing the indicator and go to the display Format and the advanced editing mode, I have changed the Format string to a universal time container of this: %< %="" h:="" %m="">< t="" %="" ^="">< %="" h:="" %m=""><>

  Apparently the time from the 'get time in seconds' is still an hour longer, but now it is correctly displayed.

• get time expired error in labview while getting screenshots

  Hello

  I need to capture a screen shot for Agilent Spectrum Analyzer, series of ESA. But everytime I run the program I always get time expired before the operation is complete. I enclose the program and also captures screenshots of the program. If anyone can fix this, I'd be very happy.

  Thank you all the...

  Pals

  Hi all

  I found the solution... Add MEMMEL function at the end... And time bet two screenshot must be more than 10 minutes, and then it gives current screenshot...

  Thank you very much...

  Pals

• tick count vs get time in seconds

  Hello

  I have a question about dt different then as 'number of cycles' and "get time in seconds" on a loop.

  I am attaching the picture which should describe the problem.

  Why is there a difference and what would be the best to do?

  Yves

  jyang72211 wrote:

  Number of cycles vs. get date/time in second do roughly the same thing, but if you use functions to calculate the time difference, you should be aware that tick count will finally make a loop around.

  Regarding your block digram, you have a table that are used to calculate the elapsed time for each iteration of the loop, and it will always be 150ms, because that is the job of the time – the loop to ensure that it completestobegin each loop to the exact amount of time specified, which is 150ms in your case.  However, regardless of the inside, the loop can be executed at any time during the 150ms you have allocated to the loop, i.e., you 150ms to run everything that's in the loop, but when run the code in the loop exactly is indeterminate.

  However, it seems that clock Tick would give you a pretty consistent result, 150ms.  It is possible that the execution time for the clock to tick is more consistent than the other function.

  Anecdote:

  Differnce between the counties of the tick will always be correct even when it rolls.

  Time loop determines when it starts, the code that runs in it determines when it ends.  If it was the other way around I would be snapping this code that takes 5 minutes to run in a defined time loop to traverse once per second.

  I agree with Yair you see the resolution in the timestamps of OS.

  Ben

• How to get USB 2.0 Mini Bluetooth V2.0 EDR Dongle adapter to work with Windows 7 64 bit?

  How to get USB 2.0 Mini Bluetooth V2.0 EDR Dongle adapter to work with windows 7 64 bit?  Is it possible to download drivers or software for it for Windows 7 64-bit?     When connect my Bluetooth device it gives me the error message he said he know driver installed and does not connect.

  Bluetooth is built into Windows 7 with Microsoft included Bluetooth system.

  However, you must make sure that the USB ports work.

• Is there a fault with upgrade 2.13.121 for the interface Adobe Creative Cloud? I want to check the updates of the program and update freezes at 5% - I have now tried 6 to 8 times to + 5 min once - it's over half an hour of my life!

  Is there a fault with upgrade 2.13.121 for the interface Adobe Creative Cloud? I want to check the updates of the program and update freezes at 5% - I have now tried 6 to 8 times to + 5 min once - it's over half an hour of my life!

  Hi David,

  Please check the help below document:

  https://helpx.Adobe.com/creative-cloud/KB/Error_Code_2_failed_update.html

  Kind regards

  Sheena

• After getting a new mac mini, all of my adobe products worked except photoshop. I get this message. Check with the developer to ensure that Adobe Photoshop CS5.1 works with this version of Mac OS X. You may need to reinstall the application. Don't forget

  After getting a new mac mini, all of my adobe products worked except photoshop. I get this message. Check with the developer to ensure that Adobe Photoshop CS5.1 works with this version of Mac OS X. You may need to reinstall the application. Don't forget to install the updates that are available for the application and OS X. I bought it originally, but do not know were my installers are. Can I get a new installer?

  1st, CS5 is 4 + years old so you MAY have problems with the latest Apple operating system

  Yosemite sometimes has problems, often related to the 'default' permissions that need to be changed

  -solution https://forums.adobe.com/thread/1689788 of a person

  - and a Java update https://forums.adobe.com/thread/1507936

  -Update may break things https://forums.adobe.com/thread/1772260

  2nd, try previous versions http://www.adobe.com/downloads/other-downloads.html

• Get-stat cpu.usage.min

  I have a need to collect data from performance of my bunches.

  I understand cpu.usagemhz.average & mem.usage.average very well.

  What I can't do, is bring together the cpu.usage.min, the cpu.usage.max, the mem.usage.min and the mem.usage.max for clusters.

  In the reference of VI-Kit cmdlet to tools is watch the "cpu.usage.min" in detailed descriptions.  So I guess that this is possible.

  Can someone give me an example of how together these mini/maxi measures?

  Min/max metrics require at least level 3 statistics.

  You have at least one of the four historical intervals seams at least level 3?

  If so, you can get the metrics of min/max for that specific interval with the cmdlet Get-Stat.

• Time machine-Mac Mini error

  I plugged my old Time Capsule to my mini mac, all the lights are on (green) .d source Time Machine Internet Lan cable, then another cable lan of TM to mac mini.

  I got error on say TM: cannot access Mac Mini!

  I tried... re the TM showed the attached picture, then missing poster: current backup: no, the next backup at 11:00

  

  As you can see it he said there are 330 GB off 998!  Well the Capsul is really empty when I go inside TM!

  How to remove everything that is living in the city or reformat?

  See if this troubleshooting help

  http://pondini.org/TM/troubleshooting.html

• provisioning machine time consuming (23 min)

  We are currently experiencing a problem where the new machines being supplied take a long time

  It currently takes 23mins which i belive he shouldn't be. the longest part seems to be the step of customization.

  the VM seems sitting there at the opening screen of session for about 10-15 min then eventually restart and become available.

  wtching customer events of vspere it

  the replica of the clones

  Adds a tag (2 s)

  then, there are a couple of reconfigures vm (50sec)

  then the power on the virtual machine (1 sec)

  then some changes of allocating resources (2 min)

  so the next thing is a message from 17 min host more later saying

  Message of

  HostName: the VMware Tools package does not run in this virtual machine. The package may be necessary for the guest operating system to run at higher resolutions to 640 x 480 with 16 colors.

  The package provides significant performance benefits. To install it, choose VM > install VMware Tools... after the guest operating system starts. VMware ESX can remind you to install the

  VMware Tools package when you turn the virtual computer. Click OK to activate the reminder.

  then he reconfigures the virtual machine a couple several times (1 min)

  Reboots(1min)

  changes of allocating resources couple (1 min)

  then its ready to go.

  It seems that something is not happy with vmware tools, but once the machine is up and running it is said that vmware tools is running and current.

  took a look in the logs of the composer and in these were all that was there for the moment on the machine being provisions and they are in the 17-minute window.

  2014-01-10 08:18:59, 446 [1400] INFO CSvmGaService - [svmGaService.cpp, 87] Initializing Service

  2014-01-10 08:18:59, 461 [1400] INFO CustomizationPersistentInfoReg - [CustomizationPersistentInfoReg.cpp, 98] registry key open comments to access personalization information.

  2014-01-10 08:18:59, 461 [1400] DEBUG CSvmGaService - [svmGaService.cpp, 323] in RunService

  2014-01-10 08:19, 538 [1400] INFO CSvmGaService - [svmGaService.cpp, 295] no policy or SVM disks not found

  2014-01-10 08:19, 538 [1400] INFO CSvmGaService - [svmGaService.cpp, 347] in the master VM

  2014-01-10 08:19, 538 [1400] INFO CSvmGaService - [svmGaService.cpp, 411] Service is in State: 4

  2014-01-10 08:19, 538 [1400] DEBUG WaitableManagerWin32 - [WaitableManagerWin32.cpp, 87] update callback for the SviServiceStopEvent event (00000158)

  2014-01-10 08:19, 538 [1400] DEBUG WaitableManagerWin32 - [WaitableManagerWin32.cpp, 90] adding callback for the SviServiceStopEvent event (00000158)

  2014-01-10 08:19, 538 [1400] DEBUG WaitableManagerWin32 - [WaitableManagerWin32.cpp, 179] send reminder for the event WaitableManagerInternal (00000150)

  2014-01-10 08:19:10, 007 [1320] INFO CSvmGaService - [svmGaService.cpp, 442] user logon.

  2014-01-10 08:20:53: 589 [1320] INFO CSvmGaService - [svmGaService.cpp, 448] user logoff.

  2014-01-10 08:20:55, 663 [1400] DEBUG WaitableManagerWin32 - [WaitableManagerWin32.cpp, 179] send reminder for the event SviServiceStopEvent (00000158)

  2014-01-10 08:20:55, 663 [1400] INFO CSvmGaService - [svmGaService.cpp, 391] CSvmGaService::RunService: stop requested.

  2014-01-10 08:20:55, 663 [1400] INFO CSvmGaService - [svmGaService.cpp, 482] service shutdown

  2014-01-10 08:20:55, 663 [1400] INFO CSvmGaService - [svmGaService.cpp, 487] stopped the machine of State SVM

  2014-01-10 08:21:44, 853 [1440] INFO CSvmGaService - [svmGaService.cpp, 87] Initializing Service

  2014-01-10 08:21:44, 868 [1440] INFO CustomizationPersistentInfoReg - [CustomizationPersistentInfoReg.cpp, 98] registry key open comments to access personalization information.

  2014-01-10 08:21:44, 868 CSvmGaService DEBUG [1440] - [svmGaService.cpp, 323] in RunService

  2014-01-10 08:21:45, 945 [1440] INFO CSvmGaService - [svmGaService.cpp, 295] no policy or SVM disks not found

  2014-01-10 08:21:45, 945 [1440] INFO CSvmGaService - [svmGaService.cpp, 347] in the master VM

  2014-01-10 08:21:45, 945 [1440] INFO CSvmGaService - [svmGaService.cpp, 411] Service is in State: 4

  2014-01-10 08:21:45, 945 [1440] DEBUG WaitableManagerWin32 - [WaitableManagerWin32.cpp, 87] update callback for the SviServiceStopEvent event (00000158)

  2014-01-10 08:21:45, 945 [1440] DEBUG WaitableManagerWin32 - [WaitableManagerWin32.cpp, 90] adding callback for the SviServiceStopEvent event (00000158)

  2014-01-10 08:21:45, 945 [1440] DEBUG WaitableManagerWin32 - [WaitableManagerWin32.cpp, 179] send reminder for the event WaitableManagerInternal (00000150)

  2014-01-10 08:21:54, 728 [1332] INFO CSvmGaService - [svmGaService.cpp, 442] user logon.

  2014-01-10 08:23:58, 386 [1332] INFO CSvmGaService - [svmGaService.cpp, 448] user logoff.

  Anyone has any ideas on where to start looking.

  Oh, we run see 5.2 and there is a floating pool.

  understood what was causing the problem. I had forgotten to configure NTP on the hosts of the new for its time was out.

• Unable to get TIME after composition VAPP omitting Java SDK

  Hi all

  I have this code that composes the Vapp. Once created the VAPP, he tries to light the vApp. I wasn't able to find the vApp, it

  Vdc2Use Vcc = main.findVdc("VDC02");
  ReferenceType orgNetworkToUseRef = main.getOrgNetworkMatchingVdc (vdc2Use);
  ReferenceType vAppTemplateRef = main.findVappTemplateRef ("moncatalogue", "mytemplate");
  main.composeVapp (vAppTemplateRef, vdc2Use, orgNetworkToUseRef);

  
  System.out.println ("Total number of vApps:"+vdc2Use.getVappRefs().size()); ")
  
  {for (vappRef ReferenceType: {vdc2Use.getVappRefs ())}
  System.out.println ("TIME:" + vappRef.getName ());
  main.powerOnVapp (vappRef);
  main.deleteVapp (vappRef);
  }

  What I find is that, vApp is is created, but the vdc2Use.getVappRefs () .size () returns me 0.

  Can somone help me to understand this.

  Thank you...

  Hello

  vdc2Use object does not know the newly created VAPP.

  Once you update it, you can get the newly created VAPP.

  Ex: vdc2Use = Vdc.getVdcByReference (customer, vdc2Use.getReference ());

  System.out.println ("Total number of vApps:"+vdc2Use.getVappRefs().size()); ")

  Kind regards

  Rajesh Kamal.

• Help the bean Ticker - how get time initial and end of string

  Hi all.
  
  I use on a windows forms 11g Rel2 machine.
  
  I try to get the report initial and end of the ticker bean time string.
  
  According to the documents, you must proceed as follows:
  
  fbean. Invoke ("CONTROL. BEAN_AREA', 1, 'getTimeString');
  
  While I did it, and no error is reported, I don't know how to store that value to a variable of forms. The idea would be to tell the user the time it takes to run a particular process. To do this, it would be nice to get the initial report and end time.
  
  I guess this could be done using an EVENT WHEN CUSTOM-POINT and: system.custom_item_event, etc. but have no idea how to go on this issue.
  
  Help will be greatly appreciated.
  
  Best regards, Luis... :))

  Method to obtain the time of currzent:

  Declare
    cur_time  Varchar2(100);
  Begin
    cur_time := fbean.invoke_char ('CONTROL.BEAN_AREA',1,'getTimeString');
  End;
  

  François

• BPEL variable, take the time to 1 min just for the assignment of value in the Assign activity

  Hi all
  
  We get a strange question in BPEL production environment.
  In the assign activity, there are 3 variable hardcoded with some default values.
  At runtime, a variable is to take more time from 1 minute to initialize just this default value.
  We do not get this problem of time in Dev and Test environments, so we are not able to test this.
  Please look in the Audit trail for the BPEL instance in the Production environment.
  Request to let me know if them work around or fix for this issue.
  
  
  
  Thanks in advance,
  Kumar

  Hello

  Yes, you can get to know the time for the verification that frm trail... u can also make use of activity sensors to calculate the exact time.

• 10g of form, can not get time with sysdate

  I have a component on a form, start_time, that has the date data type. The format mask is set to mm/dd/yyyy hh24.
  I'm trying to get the default time and date in the field with a trigger a times-news-record-instance.
  Here is the code:
  start_time: = sysdate;
  
  But what is happening in the field when running is simply the date with midnight as time, it looks like this:
  05/10/2009 00:00
  
  When I go to sqlplus and type: select sysdate double; I only get the date: 05/10/2009
  If I type select to_char (sysdate, "mm/dd/yyyy hh24 '") twice; I get: 05/10/2009-15:30.
  If in my form, I put start_time: = to_char (sysdate, "mm/dd/yyyy hh24 '"). I get an error of invalid date.
  
  How can I get the default time and date in the form field?

  I met the same problem in one of my forms. I solved the problem by changing the data type of Date to "Datetime". I also double checked to make sure that the format mask has been defined correctly as you did and I made sure the maximum length property has been set to 25.

  I hope this helps.
  Craig...

  If my response or response from another person was helpful, please mark accordingly

• POLL: who can get on Satellite click Mini L9W - B battery keyboard?

  To help establish the extent is the question of the non-recharge of the battery on the Mini click, let's take a quick poll. Please note that the version of your operating system and the BIOS and we can see who can and who cannot do this indictment.

  Thank you!

  To start we...

  No, it does not load at all.

  OS: Windows 10
  BIOS: 5.2