get windows error recovery

Similar Questions

• When I start my computer, I get Windows error recovery

  My Windows Vista Home Premium was able to start. the screen displays in the windows boot manager that cannot start Windows
  1. Insert your Windows installation disc, and then restart your computer
  2. choose your language settings, and then click NEXT
  3. click on repair your computer

  Leader: \Windows\System32\Config / System
  situation; 0xc000014c
  Info: windows failed to load because the system registry file is missing or corrupt

  I have a Dell XPS M1530. And it will not start my windows.

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Stuck in the loop "Windows Error Recovery".

  Whenever I turn on my Gateway laptop, I get "Windows Error Recovery" screen.  Any choice I chose, I only end up return to this screen.  On the advice of a professional, I dug my recovery dvd (created using my computer laptop shortly after purchase) and tried to use it.  I tried different ways to use the restore disc but cannot find one that works (by pressing 'R', F8, F12, F10, Alt F10).  I know I must be missing something... How to use the restore disc?

  Thanks for your help!

  KZ

  Hello

  boot you from it

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  change the boot order it do dvd drive 1 in trunk thern and order to boot from the recovery disc

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Equium P300-16 t - Windows error recovery screen

  It started with not to connect to the internet and to say that something did not launch. I looked on the forum and he said press F8 chose the first option (to fix your computer), I did.

  Then he took me to a with option 2 windows error recovery
  -Launch Startup Repair (when press screen becomes black for 1 second, then goes back to the same screen)
  -Start windown normally (when press turns the computer on and back on bringing me back to the same screen)

  Now when I turn it on charges it takes me to the windows error recovery screen. And no matter what I push on I always end there.

  Hope someone can be useful

  Hello

  Looks like something was wrong with the recovery process and now Windows may start t. Maybe something messed with the registry or a few important Windows files, so I think that the only option to get rid of it using the Toshiba recovery disc. It will wipe the entire HARD disk and restore the factory settings, normally it should work.

  Just so enter the Toshiba Recovery disk and follow the instructions on the screen. Windows will be reinstalled, and you get back to factory settings. :)

• Vista 64 Windows - stuck in the windows error recovery loop. don't go to safe mode, does not recognize the recovery disc.

  Gateway dx 4200-ub001a

  quadruple-heart, 6 GB of ram. No hardware problem, that I can find.
  restarts just constant return to the windows error recovery screen.
  get a blue screen saying change the bios if it continues to happen, but nothing specific. Impossible to get
  BIOS screens in any case. nothing takes me out of the loop, I can understand.

  See if you can load (using F10 or F12) a free Diagnostics, bootable from here: http://www.carrona.org/initdiag.html

  If this does not work, then try F2 to enter the BIOS.
  Together, the boot order so that the CD/DVD is first, then try to run the diagnostics bootable from here and free: http://www.carrona.org/initdiag.htmlf

  If this does not work, then you need to try another CD/DVD drive (or take it to a shop for an estimate).

  Good luck!

• Windows error recovery vista

  I have an Acer Aspire 6929g with Vista.

  Last night I turned on my laptop and I forgot about it, it was not plugged in then the battery is dead.
  Today, I turned it on and windows error recovery is there.
  I tried to launch launch repair but also to start windows normally. Both options present some loading screens and then resumed on windows error reappears.
  I followed another forum and typed F8 to access the menu restart to safe mode options.
  I tried all the safe mode and a few other options on this screen, but I finally get back to windows error recovery.
  I have not all disks to restart.
  Any other suggestions?
  The laptop is 3 years old.

  Hello

  With an Acer you would normally press Alt + F10 to start recovery to factory settings process, if no disk came with it for purchase.

  And a password for this process, it is normally of six zeros.

  Be warned; all data will be lost when reinstalling.

  See you soon.

• computer keeps coming back to Windows Error Recovery

  Original title: my computer will not exceed Windows Error Recovery, it just goes back to the same page

  I have a Dell Inspiron 531, Windows Vista, it was closed and when it is restarted it went to Windows error recovery. If I select start windows normally or start the repair, it cancels the same screen.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Windows starts in Windows error recovery

  original title: problems of windows vista home Premium

  I have a laptop HP Pavilion Entertainment PC and when I tried to start it wont boot, it doesn't try and goes to windows error recovery, after 16 seconds, it will go to the windows Boot Manager, I can't find my repair disk to try to fix it and I don't know what to do, except take a shop I have contracts and pictures of my children and grandchildren on here, I don't want to lose, can I do to get it back without losing information?

  Mark

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Windows error recovery is completely locked (Vista)

  Earlier today, I wanted to install Windows 7 next to Vista so I decided to partition my system. I used the free version of the Paragon partition system. However, he seemed to be taking muuuuch longer that it should have - on the scale of 3 hours and increasing every second. So, I decided to cancel the partition which caused my whole damaged hard disk. Now, whenever I start, I am taken to the Windows error recovery however, and I can't do ANYTHING. I can't move the arrow keys to try to use an old restore point, and I'm just helpless to see the tick of limitation in time down while trying to boot Windows causing just a reboot loop and go to the same screen.

  I can't get into the BIOS and I can't have mode secured by conventional means. I downloaded a file of recovery and I burned it to a dvd. http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/ I do not know if it will work, but since I can't get into the BIOS I can't put my CD/DVD drive as the first when starting up.

  It seems fitting that I have no options here. In addition, I don't have the installation disc more.

  If you can not get into Bios to change the boot order, an installation disc will not help, will it?

  Contact your computer manufacturer and ask if you have a recovery Partition.

  It normally takes F10 or F11 to launch it to the market.

  And try Paragon support because your use of it seems to be what started the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• "Windows Error Recovery" displays at startup

  original title: when I turn on my computer I get a black screen that says "Windows Error Recovery".

  He then said: "cannot start Windows. A recent hardware or software change might be the cause. "To solve the problem:

  It said to put in my Windows installation disc and restart and then use the "repair your computer".

  I put the disc and start again, so the same screen came. Then I hit OK to start Windows normally and a screen that says "Windows Boot Manager: could not start Windows."

  I keep hitting good for all options and keeps it running across 3 screens. Does anyone know what I need to do?

  How to start windows from a cd or dvd

  If the page install Windows does not appear and you are not asked to press a key to start (or "boot") from CD or DVD, you may have to specify that your computer use its CD or DVD drive as the boot device. This means that you must set the CD or DVD drive as the first startup device in the basic input/output system (BIOS). Here's how:

  1. Turn on your computer, insert the Windows installation disc, and then restart your computer.

  2. Newer computers usually display a startup (or boot) menu. In the start menu, select "Configuration of the BIOS," or "BIOS settings," or something similar.

     Note:

     • Procedures for this vary depending on the manufacturer. Check the documentation that came with your computer or visit the website of the manufacturer of the computer. Each computer has its own options of starting (or starting) and access to the configuration of the BIOS. If your computer lacks a start menu, look for a message that says "Configuration of the BIOS", "Settings of the BIOS", or something similar, and then press the appropriate key when prompted to display the BIOS Setup screen.

  3. The BIOS Setup screen. On the BIOS Setup screen, select the option called "Boot order" or something similar.

  4. Select your CD or DVD drive as the first boot device.

  Restart your computer, and then start Windows from the installation or the DVD CD

  Startup Repair
  

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  If you have a Windows Vista installation disc:

  1. Insert the installation disc.

  2. Restart your computer.

     Click the button start , click the arrow next to the button lock and then clickRestart.

  3. If you are prompted, press any key to start Windows from the installation disc.

  4. Choose your language settings, and then click Next.

  5. Click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  If the Startup Repair tool is an option of recovering preinstalled on your computer:

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the button start , click the arrow next to the button lock and then clickRestart.

• Do one of the following:

  • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you will need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  • If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

• In the Advanced Boot Options screen, use the arrow keys to highlightRepair your computer and press ENTER. (If repair your computer is not listed as an option, then your computer does not include startup as a preinstalled recovery option repair).

• Select a keyboard layout, and then click Next.

• Select a user name and password, and then click OK.

• In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs

If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Help: windows error recovery

  Hello

  I bought a HP G60-519WM laptop pc a few days back with windows 7. It came loaded with Norton AntiVirus. I tried to uninstall and install then a few other antivirus. I uninstalled it in the usual way to remove programs in the control panel. He asked resart computer to complete the uninstall process and since then my work is not mobile. As soon as it reaches the entry password stagea blue screen appears and starts again with a screen saying black "windows error recovery" with 4 boot options: -.

  1. safe mode

  2 safe mode with network

  3 safe mode with command promp

  4. start windows normally

  If I choose 4. option the entire process repeats. and if I choose 1. option it works normally with all my files in any securities. But I'm not able to access the internet in safe mode.

  Please, help me get through this problem. What could be the problem in your opinion, and what should I do about it. Pease explains the step by step procedure, as soon as possible

  Thank you

  PS - I did not create the recovery disc again

  Try to go to Safe Mode

  Run system restore

  Restoration of selected Scritped (the day where you started first the system)

• Windows error recovery, "load failed with error 1009 (STHIVE #0).

  Hello world

  This problem occurred to me yesterday. When I started windows, there is here a dialog box saying "Windows Error Recovery" and below, is

  "Unable to start Windows. A recent hardware or software change might be the cause. "(I don't remember changing anything)

  "If windows files have been damaged or misconfigured, startup can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. »

  There are two options it saying

  -Launch Startup Repair tool

  -Start Windows normally

  When I clicked on start Windows normally, seems that Microsoft Corporation loading bar never ends

  When I clicked launch a startup repair... A box named "Startup Repair" appeared, saying "Startup Repair is checking your system for problems..." "But after that, it seems that nothing had changed. When I opened my laptop once again, he went to the dialog box saying "Windows Error Recovery" again.

  What should I do now?

  My laptop is "Compaq Presario V3500"

  Also, I see that this tread on Compaq.com http://support.hp.com/us-en/document/c01612373 is it safe to do? I ' ts ok for me to lose all my files just to repair this laptop...

• Re: Satellite A500 - Windows error recovery

  I have a problem with my laptop

  When I restart my laptop, it tends to be stuck on this windows error recovery screen. It gives me two options
  (1) Lauch Startup Repair
  (2) start Windows normally

  Tried both, it turns off, reboots that it ends on the same screen over and over again. Tried to access it via safe mode, nothing helps. tried to fix it through windows disk 7, did not work. tried last good configuration, not good either.

  It's the screen that I always end up and it does not go further.
  http://I585.Photobucket.com/albums/ss297/fobssquad/P1010014.jpg

  Please can someone show me a few guidelines as to how can I do to fix this problem. I'm a freshman in College, I have no money to take it to a professional. That's why I try to fix it myself as I have urgent need.

  Thank you in advance.

  Hello

  Hmm, not easy, but in my opinion it s something wrong with properly installed Windows OS and HDD recovery doesn't work

  You have the Toshiba Recovery disk?
  If Yes, you can use it to restore the original settings windows. Just boot from that disk and follow the instructions on the screen, everything that s! :)

• Question - loop on Satellite L350-170 Windows error recovery

  Toshiba Satellite L350-170 - Intel Pentium Dual Core T3200 2.00 GHz, 2 GB, 250 GB, 17 "TFT, DVDSM, VHP

  My wife bought three weeks ago. Use of the lamp. Everything works fine, until a dialogue of "Startup Repair" appeared. Since then, the machine starts.

  Machine goes into "Windows Error Recovery" immediately after the Toshiba start screen and has the following options;
  (1) run the Startup Repair tool
  (2) start Windows normally

  Option 2 results in a blank screen and finally goes back to the screen "Windows Error Recovery".

  Option 1 has the reboot dialog box;

  "Your computer was unable to start.
  Startup Repair is checking your system for problems... »

  At this point, the Toshiba laptop enters an endless loop.

  So what I do now? There is no disc came with the laptop, so I can't reinstall the operating system. The dealer (Comet) is less useful and don't know no refund or Exchange for a defective product.

  Can someone please!

  Try this:

  Press F8 immediately after that the laptop has been turned on.
  Then choose the first option called fix my computer.
  Then a new window should open and there you can choose the option called Toshiba recovery.

  Please note then this procedure would start the Toshiba HDD recovery and the BONE to relocate again. This would be to format the whole HARD drive and set the OS to the factory settings.

  In my eyes, you can use this procedure for recovery of HARD drive, or you can try to reinstall the OS using the Toshiba recovery disc.
  Both lead to the same results

  Good bye

• When I turn on my blue screen laptop appear after windows error recovery windows also appear

  When I turn on my laptop, a blue screen appears after windows error recovery windows appear also... ask in safe mode are normal windows startup?... what I can do... is a problem on my system?... Please help me...

  Hello

  ·         What operating system is installed on the computer?

  ·         What are the error messages that are displayed on the blue screen?

  ·         Did you make any changes before the show?

  In the recovery menu, select Safe mode and check if you can connect?

  You can also try to restore the system in safe mode.

  If you are able to boot to the desktop in safe mode, then I suggest you put the computer to boot in safe mode and check if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Reference: resolution in Windows 7 stop errors (blue screen)