Gettig error message: value "HKEY_LOCAL_MACHINE\": "ConfigDir" is not found in the registry for the Corel software

Similar Questions

• XP Pro error message "requested lookup key is not found in any active activation context" appears

  XP Pro error message "requested lookup key is not found in any active activation context" displayed when some Start Menu options are selected or whatever it is run from command run. IE will not start. Windows Update ran at the last stop, but site selection are not displayed. Tried to repair XP Pro upgrade disk. Reinstalled SP3. The IE7 installation fails during the installation of updates. Cannot find the Activation Assistant. Help!

  This should certainly guide you in the right direction http://forums.techguy.org/web-email/839381-solved-requested-lookup-key-not.html

• How resolve the error that reads "wmvcore2.dll's not found" after the installation of Cool Edit Pro 2.0?

  Hello

  I recently tried to install Cool Edit Pro 2.0 on my Dell laptop. After that it's over, I went to open the application, but the error which read "wmvcore2.dll is not found" message popped up. He suggested I have reinstall the application, so I did, but nothing helped.

  I wonder what I can do to solve this problem and can you give me any help will be greatly appreciated.

  Thank you.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  If the above does not help, try to repost in Forum Vista programs:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite C650 - error message at start up - GeFIF89ay not found

  This message appears whenever I start Toshiba C650 "the procedure entry that gefif89ay point could not be located in the dynamic link library kernel32.dll. Help, please

  Hello

  I see this error message for the first time and research using t n GeFIF89a a lot.
  I didn t find any success about the GeFIF89a.

  But I could find a few hits searching the + procedure entry point could not be located in dynamic link library kernel32.dll +

  In many cases, people have said that Windows update has solved this problem
  Check it!

  PS: I also recommend the system using the CCleaner, this small tool helps you clean many registry problems.

• Receive the error message"MFC-7860DW LAN is not found" when scanning

  Original title: printer all-in-one Brother MFC-7860DW after Windows update problem

  Shortly after that I installed an update through Windows for my Brother multifunction printer, I could not scan documents to my printer wireless to my Toshiba laptop.  I got an error message saying "MFC-7860DW LAN is not found."  Yet the wireless connection between the printer and the router is fine, and I can print from my computer very well also.  I did this for a long time so I have something had happened recently.  The update was allegedly from brother.  I spoke with the brother support and they gave me a way to scan the computer using Windows Fax & scan, but I really need to be able to make it from the printer itself.

  I have reset the PC to a restore point before that I did the update of Windows, and I uninstalled and reinstalled the software of the printer 3 times, including the connection with the wireless system, all without effect.  When I check the Brother Installation Diagnostics file, it shows that the scanner driver has no installation and connection.  All the other drivers installed correctly.

  Any ideas how to install my scanner driver?  Thank you!

  Try Ronald ron's response

  Altho, reg cleaner ccleaner can erase valid entries reg sometimes. So, I don't know if I would use that

• error message is Dell inspiron1501 OS not found

  I have a dell inspiron1501 which has messages of error operating system not found media test failure, check cable and leave the PXE ROM of broadcom? Then someone told me to reinstall windows and how I cam to this problem... Anyone who wants to help?

  I can't download my windows cd. It is said that they cannot locate the drivers and I have drivers and utilities cd... im so lost__Please help.

  http://www.pcmech.com/Forum/showthread.php?t=82800

  Read the above; it applies to all brands of computers.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  Dell recovery media installation issues, contact Dell.

  This isn't their recovery process, Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• I get the error message: 87A required option does not appear in the command line.

  * Original title: errors

  I'm trying to reformat my Windows 8 operating system, because I have pop-ups, lack of slow response files and a host of other problems which seem to have started when my son downloaded things on the Internet. I have missing files and was trying to solve this problem so that I could go back to reformat the hard drive.

  I get the following error:

  Error: 87

  A required option is missing from the command line.

  Make sure that /index or/Name is specified.

  The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

  How can I solve this problem?

  MD

  How are you trying to "reformat"?

  Have you thought about running a malware first application to see if it is the problem?

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• After the installation of Windows Vista, I get the error message "" windows/System / * ' file was not found "

  Original title: after the new installation of windows Vista it does not work.

  After the new installation of windows Vista on my laptop Lenovo at startup, it displays "windows/System / *" file could not be found... I also tried to fix.

  Hello

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  If you continue to have problems with it contact lenovo

  http://www.Lenovo.com/us/en/index.html

• Class not found in the list of the specified assembly.

  Hi all

  I create a .dll ColdFusion object, but I get the following error message.

  "Class GenerateSQLReport not found in the list of the specified assembly. The assembly containing the class must be provided to the assembly attribute. »

  The process that I follow:

  -Updated the ColdFusion 9.0.1

  -Uninstall .NET integration Service

  -Install the .NET version 9.0.1 integration Service

  -Run the code.

  My Code is: ' < cfobject type = "dotnet" name = "MDBDTable" class = "GenerateSQLReport" (assembly="#expandPath('./GenerateSQLReportDLL.dll') #" > ".

  I got the following StackStrace:

  __________________________________________________________________________________________ ______________________________________________________________________________

  coldfusion.runtime.dotnet.Assembly$ DotNetClassNotFoundException: class GenerateSQLReport not found in the list of the specified assembly.

  at coldfusion.runtime.dotnet.Assembly.generateProxy(Assembly.java:272)

  at coldfusion.runtime.dotnet.Assembly.loadClass(Assembly.java:248)

  at coldfusion.runtime.dotnet.Assembly.loadClass(Assembly.java:223)

  at coldfusion.runtime.dotnet.DotNetProxyFactory.getProxy(DotNetProxyFactory.java:78)

  at coldfusion.runtime.ProxyFactory.getProxy(ProxyFactory.java:65)

  at coldfusion.runtime.CFPage.createObjectProxy(CFPage.java:4949)

  at coldfusion.tagext.lang.ObjectTag.doStartTag(ObjectTag.java:427)

  at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2722)

  to cfDotNetDll2ecfm375138657.runPage(D:\Projects_Upendra\CodeForTesting\DotNetDll.cfm:2)

  at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231)

  at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416)

  at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)

  at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:363)

  at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40)

  at coldfusion.filter.PathFilter.invoke(PathFilter.java:87)

  at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27)

  at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)

  at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:74)

  at coldfusion.filter.ClientScopePersistenceFilter.invoke (ClientScopePersistenceFilter.java:2 8)

  at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)

  at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)

  at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)

  at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)

  at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:53)

  to coldfusion. CfmServlet.service (CfmServlet.java:200)

  at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)

  at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)

  at coldfusion.monitor.event.MonitoringServletFilter.doFilter (MonitoringServletFilter.java:42)

  at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)

  at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)

  at jrun.servlet.FilterChain.service(FilterChain.java:101)

  at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)

  at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)

  at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)

  at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)

  at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)

  to jrunx.scheduler.ThreadPool$ DownstreamMetrics.invokeRunnable (ThreadPool.java:320)

  to jrunx.scheduler.ThreadPool$ ThreadThrottle.invokeRunnable (ThreadPool.java:428)

  to jrunx.scheduler.ThreadPool$ UpstreamMetrics.invokeRunnable (ThreadPool.java:266)

  at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

  __________________________________________________________________________________________ ___________________________

  Help, please.

  I'm not very sure of .NET. If I'm missing something please suggest.

  The CF code must include the full path to the class, including any namespace. When you create a c# project in Visual studio, it usually uses the name of the project as"namespace by default". So if your project is named "MyProject" the full path would be:

  Post edited by: == cfSearching == -.

• "... SHRegGetValueW not found in the library of dynamic links SHLWAPI.dll. »

  Message error "the procedure entry point SHRegGetValueW be found in the library of dynamic links SHLWAPI.dll". I get this error message after downloading it and pre-installation of IE 8.  Compared SHLWAPI found on HD with SHLWAPI on OS installation disc after doing a SFC/scannow and found them manually in the difference.  Copied the body of SHLWAPI on disk and subed in the file on hard disk.

  Using IE 6 I am unable to update to SP3 after finally succeed to install SP1a by using Micro... Update.  The analysis concludes several minor updates and it fails to install those... repeatedly!  This is done after / because of a clean installation where Win2000Pro was the previous operating system.

  It is said "the mind goes first" and this is perhaps what is wrong, because I installed clean OS on dozens of comps with no problem al all.  H E LLLL PPP!   All thoughts will be performed and considered a fix... until it doesn't

  Positive thinking... T to all for your help and your review!

  909090... J

  Message error "the procedure entry point SHRegGetValueW be found in the library of dynamic links SHLWAPI.dll". I get this error message after downloading it and pre-installation of IE 8.  Compared SHLWAPI found on HD with SHLWAPI on OS installation disc after doing a SFC/scannow and found them manually in the difference.  Copied the body of SHLWAPI on disk and subed in the file on hard disk.

  Using IE 6 I am unable to update to SP3 after finally succeed to install SP1a by using Micro... Update.  The analysis concludes several minor updates and it fails to install those... repeatedly!  This is done after / because of a clean installation where Win2000Pro was the previous operating system.

  It is said "the mind goes first" and this is perhaps what is wrong, because I installed clean OS on dozens of comps with no problem al all.  H E LLLL PPP!   All thoughts will be performed and considered a fix... until it doesn't

  Positive thinking... T to all for your help and your review!

  909090... J

  First of all, you can not install SP3, except if you have SP2 installed successfully. Since you have SP1a, you need install SP2, then try to install the SP3 and IE8.

  In addition, this can happen if your SP service pack is damaged/corrupted.

  You receive an "Explorer.EXE - Entry Point not found - the procedure entry point SHCreateThreadRef is not found in the library of dynamic links Shlwapi.dll" error message after you install the MS04-038 security update
  http://support.Microsoft.com/kb/888162

  Installation of Windows Internet Explorer 8 on a Windows XP-based or a Windows Server 2003 computer returns error: "SHRegGetValueW procedure entry point is not found in the library DLL SHLWAPI.dll."
  http://support.Microsoft.com/kb/972264

  NASS - http://www.nasstec.co.uk

• Property named 'name' is not found on the subject: VcVirtualMachine

  Hello

  I'm struggeling with a strange problem.

  I try to get all the VMS in vcenter (s) through sdk like this:

  var sdkConnections = VcPlugin.allSdkConnections;
  for (var i = 0; i < sdkConnections.length; i ++) {}
  var sdkConnection = sdkConnections [i];
  machines virtual var = sdkConnection.getAllVirtualMachines ();
  If (vms.length > 0) {}
  for (var j = 0; j < vms.length; j ++) {}
  var vm = vms [j];

  After that, I try to get the id and the name like this (e.g.) to write in the log example:

  System.log ("--> > > DEBUG - IE '" + vm.id + "'");

  System.log ("--> > > DEBUG-name '" + vm.name + "'");

  but DO NOT several id EXISTS in the vcenter BDD but coming back since the sdk?
  Te is a virtual machine with the id "id-47", which is not in the vpx_vm table
  but another with the id 'id-647' is in this table.
  When I try to get the name (vm.name) of the two I find myself in an exception with the message "property named 'name' is not found on the object: VcVirtualMachine.
  I tried to avoid this and to verify the existence of the property, but without success.
  How well to check the existence of the 'vm.name' without ending up in an error?
  (another question would be: why is the receiving of vm via the sdk which do not exist in vcenter?)
  Thank you!!!
  Chris

  Use try/catch...

  This will allow your code to continue treatment and simply log the errors rather than throw an exception.

  try{
  // your code here....
  }catch(err){
       System.log("Error: "+err);
  }
  

• Compiler error message: BC30451: name 'UserEmail' is not declared.

  Get the message when I test the page. Anyone sugest a solution please?
  Compiler error message: BC30451: name 'UserEmail' is not declared.
  
  Code in the page below.
  
  
  < % @ Page Language = "VB" ContentType = "text/html" ResponseEncoding = "iso-8859-1" % >
  < % @ register TagPrefix = "MM" Namespace = Assembly "DreamweaverCtrls" = "DreamweaverCtrls, version = 1.0.0.0, publicKeyToken = 836f606ede05d46a, culture = neutra l" % > "
  < MM:DataSet
  ID = "dsUsers".
  Runat = "Server".
  IsStoredProcedure = "false".
  ConnectionString = "< % # System.Configuration.ConfigurationSettings.AppSettings ('lle MM_CONNECTION_STRING_conSQLPerene") % > '.
  Type_base_donnees = ' < % # System.Configuration.ConfigurationSettings.AppSettings ("Perenelle MM_CONNECTION_DATABASETYPE_conSQL") % > '.
  CommandText = "< % #"SELECT dbo. " Users.UserEmail, dbo. Users.UserPassword FROM dbo. Users WHERE dbo. Users.UserEmail=@UserEmail AND dbo. Users.UserPassword=@UserPassword"% > '
  Expression = '< % # IsPostBack % > '.
  Debug = 'true '.
  > < Parameters >
  "< Name="@UserEmail parameter "Value =" < % # IIf ((Request.Form ("UserEmail") <>Nothing), Request.Form ("UserEmail"), "") % > ' Type = "NVarChar" / > "
  "< Name="@UserPassword parameter "Value =" < % # IIf ((Request.Form ("UserPassword") <>Nothing), Request.Form ("UserPassword"), "") % > ' Type = "NVarChar" / > "
  < / Parameter > < / MM:DataSet >
  < MM:PageBind runat = "server" PostBackBind = "true" / >
  
  < script language = "VB" runat = "server" >
  Protected Sub Page_Load (ByVal Src As Object, ByVal E As EventArgs)
  "Don't cache this page.
  Response.Expires = - 1
  Response.AddHeader ("Pragma", "no-cache")
  Response.AddHeader ("cache-control", "no-store")
  
  "Check the user credentials in the page".
  If (UserEmail.Value = dsUsers.FieldValue ("UserEmail", Nothing)) & & (UserPassword.Value = dsUsers.FieldValue ("UserPassword", Nothing)) Then
  ' The user has been authenticated.
  "1. create the authentication ticket."
  "2 redirect to the appropriate page.
  
  "1. create the authentication ticket."
  "Create and use forms authentication ticket.
  FormsAuthenticationTicket ticket = New FormsAuthenticationTicket(1,)
  Request.Form ("UserEmail"),
  DateTime.Now, ' issue times
  DateTime.Now.AddMinutes (30), ' expires in 30 minutes
  False, ' no persisting
  Dim ' role assignment is stored in the UserData as 'Users')
  
  "Create a new HttpCookie (encrypted) using the ticket has created."
  ' and name it accordingly to the value specified in the < forms > element
  ' in the web.config file.
  Dim Cookie As HttpCookie = New HttpCookie (FormsAuthentication.FormsCookieName, FormsAuthentication.Encrypt (ticket))
  
  ' Add the cookie to the outgoing response.
  Response.Cookies.Add (cookie)
  
  'Redirect as appropriate.
  Dim ReturnUrl As String
  If Request.QueryString ("ReturnURL") Is Nothing Then
  ReturnUrl = "/client-area/index.aspx."
  On the other
  ReturnUrl = Request.QueryString ("ReturnURL")
  End If
  Response.Redirect (ReturnUrl)
  
  On the other
  Msg.Text = "Invalid Credentials: Please try again."
  End If
  End Sub
  < /script >
  
  
  

  Replied. Just named incorrectly input fields. Couple of other problems too but sorted and now works fine...

• I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

  I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

  only title bar opens and nothing else... Please help

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Also check the cookie exceptions.

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• error message - your backup file is not valid. It may have been deleted.

  When I start my laptop I say error message-"your backup file is not valid. It may have been deleted.' I can't select one that he tells me to do and I can't get it back, what do I do to fix this error?

  Hello

  1. what operating system is installed on your computer?

  2. what file the error refers?

  Method 1: Start in safe mode and check if it helps.

  Windows XP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  Windows 7: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  Note: make sure to start the computer in normal startup, troubleshooting is completed.

  Method2: Start the computer in a clean boot and check if it helps.

  Windows XP: http://support.microsoft.com/kb/310353

  Windows Vista and 7: http://support.microsoft.com/kb/929135

  Note: make sure to start the computer in normal startup, troubleshooting is completed.