Getting error: cannot run on the development web server configured

Similar Questions

• Cannot connect to the integrated Web server

  I have a HP p1606dn printer I need to change the IP address. I can't connect to SAP by using the IP address of the printer configuration page. I also tried on a work of the same model printer and cannot connect. I can't understand what I'm doing wrong. I type in xxx.xxx.xx.xxx in the address bar in Internet Explorer which is supposed to be an approved browser. Thank you!

  If the Web integrated printer server does not load when the IP address is entered, then means generally is not a direct path between the printer and the computer is trying to access.

  You mentioned that you must change the IP address.  What is the reason for this change?  The network IP addressing scheme changed so that the PC and the printer may appear as on different networks?

  I don't know if it will work in your particular situation, because it depends on whether or not it has access to an Ethernet connection.  You could try the connected printer to an Ethernet port which would be on the same network as the PC and then access it by IP addressed assigned to the Ethernet address.  Once the integrated Web server load, you can manually set the wifi information and then return to the wifi.

• [HELP] I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  Hi, I'm new developer on the Blackberry platform.

  I make the first application, but there is a problem when I wanted to install in the Simulator.

  My application has several screen and each take the server data, analyzing the data and displays on the screen.

  My problem is any executable thread.

  When I'm using the code below, it is fine. My application can work perfectly on a simulator.

  public TestingScreen() {
     // Runnable thread = new Runnable(){
     //   public void run() {
      // TODO Auto-generated method stub
          // my code get data from server
          Dialog.alert("Hii");
     //   }
     //};
     //new Thread(run).start();
  }
  

  but, if you use floor area or UiApplication.getUiApplication (.invokeLater), I got error "i/o Error: cannot run program"jar": CreateProcess = 2 error, the system cannot find the file specified"

  public TestingScreen() {
     Runnable thread = new Runnable(){
        public void run() {
      // TODO Auto-generated method stub
          // my code get data from server
          Dialog.alert("Hii");
        }
     };
     new Thread(run).start();
  }
  

  I have the 11 screen and all have executable statement and works perfectly. Can run in the Simulator, can get data from the server. But when I create the new #12 screen (copy paste other on-screen), page couldn't use an executable statement. Each I use Runnable/thread, I got error. But when I remove an executable statement my work normally requires.

  I already have Google but I do not get the answer.

  Please advice. Thank you very much.

  Kind regards.

  hrnt, thanks for your answer on this issue. It helped me solve my problem as well.

  Just to add, for someone else, I use the 32-bit and changed Java SDK my way to the bin folder where the SDK was installed.

• Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  Hello

  My apps works very well for the current code, but if I add a new function or class in my eclipse application code indicates the error of

  Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  I searched the forum and google for this problem, certain solutions are related to java path but myjava path is ok as the current code works very well

  So what problem here? and whats solution for that?

  
  

  

  has got the solution to the problem of its need for .jar files path previously I did not understand why he neede path of pot now his reason is here

  http://supportforums.BlackBerry.com/T5/Java-development/I-O-error-cannot-run-program-quot-jar-quot-C...

• ASP - function Remote - error: cannot run the trigger

  Hello

  I tried to get my macros being run by a remote server.

  It's my function file remote named "remote_test_pc.asp":

  framework integrated; then

  conf t

  interface $INTERFACE

  Description macro $TRIGGER

  PC-VoIP-Port Description

  switchport access vlan $ACCESS_VLAN

  switchport mode access

  switchport vlan voice $VOICE_VLAN

  broadcast storm control level 1 k pps

  multicast storm-control level 2 k pps

  Storm-control action trap

  no event log status link

  bandwidth share SRR-queue 10 10 5 75

  form of bandwidth SRR-queue 10 0 0 0

  priority queue

  MLS qos trust dscp

  no link-status of snmp trap

  spanning tree portfast

  spanning tree enable bpduguard

  service-policy input PO_TRUST-PHONE

  output

  end

  FI

  framework integrated; then

  conf t

  interface $INTERFACE

  No description of macro

  Description by DEFAULT-CONFIG

  switchport mode access

  switchport access vlan 999

  broadcast storm control level 1 k pps

  multicast storm-control level 2 k pps

  Storm-control action trap

  spanning tree portfast

  No switchport voice vlan $VOICE_VLAN

  bandwidth share SRR-queue 10 10 5 75

  form of bandwidth SRR-queue 10 0 0 0

  priority queue

  MLS qos trust dscp

  no service-policy input PO_TRUST-PHONE

  FI

  output

  end

  FI

  And this is my config on the switch to mac-group and the macro:

  !

  macro auto Test group address-mac-PC

  Mac 0019.9990.5509 address list

  !

  comprehensive treatment of the auto macro

  macro auto control global detection mac address

  !

  automatic macro execution Test-PC remote ftp://192.168.1.11/remote_test_pc.asp ACCESS_VLAN = 123 VOICE_VLAN = 127

  !

  When I plug this workstation for the following syslog messages:

  Switch #.

  Remote_test_pc.asp loading!

  [OK - 1702/4096 bytes]

  Enter configuration commands, one per line.  End with CNTL/Z.

  Switch con0 is now available

  Press RETURN to get started.

  Error: Cannot run the trigger Test-PC, please check trigger exists and corresponds to the valid function

  26 September 11:45:37.755: % SYS-5-CONFIG_I: configured from console by console

  26 September 11:45:37.772: % AUTOSMARTPORT-5-INSERT: tty0(user id:): dispositif avec adresse mac 0019.9990.5509 détectées sur l'interface FastEthernet0/3, exécuté le Test-PC) Message

  Switch #.

  The port works as it should, but I wonder about the error message.

  The switch is 2960 with IOS 12.2 (58) SE2.

  Can someone explain what this means?

  Thank you very much!

  Sven

  Hi Sven,

  I think that you are not constantly getting this message... Ignore it for now... That have no functional impact... This has been supported in 15.0 (1) SE.

  Thank you

  Ankur-

• I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  Why is the error, how to fix?

  File jar.exe. For example, I have a copy of it in C:\Program Files (x86)\Java\jdk1.6.0_24\bin

• How to acess, Skype profile to set parameters when crash anotification come tell me that the error cannot run

  original title: Skype

  How to acess, Skype profile to set parameters when crash anotification come tell me that the error cannot run

  Hello

  The question you posted is more appropriate for support help forums Skype. I suggest you send the same on the following link for assistance:

  https://support.Skype.com/

  I hope this helps.

• Hardware Certification - audit gives an error "cannot run processSetup for configuration: cannot run createHOMObj for configuration: no GuestOS section in the XML file.

  I tried to set the session established the IPs VMs / host / FQDN / VM names

  but each time got the error "cannot run processSetup for configuration: cannot run createHOMObj for configuration: no GuestOS section in the XML file.

  I changed the names VMS in vCenter for FQDN and it solved the problem.

• Stand-alone application with LabView 7.0 get error cannot find DAQmx clear task.vi

  I tried to create a stand alone vi with the Build Application or shared Library (dll) in LabVeiw 7.0

  When I put it on another PC to test it I get the error "cannot find DAQmx clear task.vi.

  the other PC also has 7.0 and 8.1 DAQmx Labview.

  I think my problem is in the source tab, where you are supposed to add dynamic vi and support, I have search the forums and database of nor and have not found a solution.

  Hi LabTech09,

  When you run the executable file on the other computer, that's when you get this error?  You have the same exact versions of DAQmx and LabVIEW on both computers?  Is the dialog box allow you to navigate to the clear task.vi DAQmx?  If so, you can find these screws in C:\Program NIUninstaller Instruments\LabVIEW 7.0\vi.lib\DAQmx\configure\task.llb.  The executable runs on the development computer (the machine, it was compiled on)?

• Outlook: "cannot get mail" "cannot connect to the server.

  April 6 at 7:00 PM CST, my iPhone 5 running iOS stopped syncing with my Microsoft Outlook account 9.3.1.

  I did have problems with my iPhone sync with my Outlook email over the past 5 years so far.

  My Outlook account is to these servers-

  web mail:
  https://blu183.mail.live.com/

  for Windows Live Mail 2012:
  https://mail.Services.live.com/DeltaSync_v2.0.0/sync.aspx

  I tried to delete my Outlook account from my iPhone and re-establishment and the account Outlook 'checks' correctly - but this does not solve the problem.

  The iPhone keeps displaying a pop-up message:
  "Cannot get mail" "cannot connect to the server.

  My iPhone is syncing correctly with my Gmail accounts and iCloud.

  Also, I created my Outlook account on iPad to my daughter who is running iOS 8.1.2 and I have the same problem.

  This seems to be a situation of the Apple servers, do not sync with Microsoft servers.

  Thank you

  It seems that Outlook is to have questions, not only with iPhones but W10, see this thread:

  I lost all my contacts.

• Cannot run chkdsk - Chkdsk cannot run because the volume is in use by another process.

  original title: can I run chkdsk on win xp home, but when I try to use switches, I get cannot lock the current drive. Chkdsk cannot run because the volume is in use by another process. HELP PLEASE

  I run chkdsk without switches on win xp home. I told myself I file error and to set running chkdsk with /f. but when I try, I get the cannot lock the drive, chkdsk may not run because ect...  I tried in safe mode, same thing. I sfc/scannow, but it has not fixed the problem files. help please

  It's normal.  You can not run a check disk on your system disk because your system is to use.  The Message you get should ask you if you want to run it at the next reboot.  You must answer 'Yes' to this message, and then restart your computer.  A disk check should take place as it is restarted.

  FYI: A check disk can take hours if you have a large drive or there are a lot of problems on the disc and you cannot use your machine while the scan is in progress.  Better to operate during the night.  Also, I got checkdsk completely erase the hard disk to the point where the only option was to reformat and reinstall Windows.  Make sure that your data available are well-supported before running Chkdsk.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• Chkdsk cannot run because the volume is in use by another process

  My computer was working fine until last night. Now when I connect I get a blue screen saying that the computer shuts down to prevent further damage from happening. I tried to restore to an earlier point in time when my computer was working but then I get the error:

  The OS disk (C :) has errors.
  Windows has detected corruption on OS (C :) file system. You should check the drive for errors before you can restore it.

  So I'm going to run the chkdsk utility, and I get the error:
  Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts.

  I'm confused because the chkdsk unility usually works, and I have no idea why she is being used by another process. I am clearly not very good with computers. I tend to do a lot of spywear and adwear on my computer. I have Spyware Doctor that removes any infection.

  Help, please. I've tried everything. Thank you.

  Asha22,
  It appears from your last post why chkdsk did not run on reboot and you gave an incorrect message is that you did not a space between the volume and the f number.  The correct syntax is:

  CHKDSK c: /f

  You can also run the utility disc in this way:
  http://windowshelp.Microsoft.com/Windows/en-us/help/bc1393cf-9f9c-79C7-0f91-9337c2c41f811033.mspx

  1. open the computer by clicking the Start button, click computer.
   
  2. right click on the hard drive you want to check, and then click Properties.
   
  3. click on the Tools tab and then, under check for errors, click check now.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
   
  4. click on start.
   
  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will need to reschedule the disk check for the next time you restart your computer.

  The reason that it says that the disk is in use by another process is because it is in use by the operating system (Vista), and that's why it must be run at startup, before the operating system loads fully.

  Another utility, you need to perform is the System File Checker, if you can get your computer to start, either normally or in Mode without failure.
  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Let us know what these tests are and how we can also provide assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I/o Error: Cannot run program "C:\Program": error CreateProcess = 87 using ant

  Hi guys,.

  I'm trying to build my console application using Ant. It is a part of my build.xml

  When I try to "build Ant" I get this error returned:

  I/o Error: Cannot run program "C:\Program": error CreateProcess = 87, the parameter is incorrect

  referring to this line:

  I tested the names of directory and environment variables all (the variable

  ${46.jde.home}
  

  too) is set correctly, but the error is still there... How could I solve this problem?

  Thank you very much

  Sometimes, the length of the path give birth this error but I have not seen in a while. I ended up installing most of my OCD: \RIM apps to avoid path issues all together.

• Error: Cannot proceed with the installation

  For the last month or so I tried to update Flash Player. I get to a certain point (about 90% through the installation) and I get a message: "error: cannot continue with the installation.

  It opens the page of Flash support in the browser and told me that my installion failed. I tried all of the suggestions, including making a 'clean' installation by deleting in the Libray files, so to download and run the Flash Uninstall app player. So currently, I have NO installed Flash Player version and am still getting the erroe message.

  Mac OSX 10.8.4

  Mac Mini 2.26 Intel Core Duo - 8 GB of RAM

  Browser: Firefox 22.0

  Flash Player V 11.7.700.225 strives to update-11.8

  Thanks in advance for any help you provide.

  Dave

  

  You run any kind of antivirus? or a firewall?

  Have you tried to install under a different user account?

• Error: Cannot run program "jar": CreateProcess = 2 error

  Hi all

  I create a BlackBerry App... All this worked fine until there are times... Now when I agin tried to run during the packaging of the app has been mentioed below error...

  "Error: cannot run program"jar": CreateProcess = 2 error, the system cannot find the file specified."

  Why it is so? Please help me...

  Best regards.

  You can search for java 7, I had problems with it and re-installed java 6 for bb dev.