Getting started (Windows 8) I get the error message "Reboot and select good Boot Device."

Similar Questions

• Cannot start the computer, the error message "Reboot and Select proper Boot device or Insert Boot Media in selected boot device and press a key any."

  Original title: can't access my BIOS, but blocked on select boot device

  I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.

  Hi Ryan,

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?

  Method 1:

  You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.

  http://forums.Toshiba.com/T5/Windows-7-knowledge-base/how-to-enter-the-system-BIOS-on-Windows-7-computers/Ta-p/275629

  Method 2:

  If the problem persists, I suggest you to return the item and check if it helps.

  What can I do if my laptop Windows 7 or Windows Vista does not start?
  http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717

  If the problem persists, I suggest you to contact the Toshiba Support for assistance.

  http://support.Toshiba.com/support/home

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• I get an error. "reboot and select proper boot device or insert boot media in selected boot device and press a key" while using the hard drive.

  Replace drive hard hgst with seagate and when I replaced the hard drive from hgst orignial he says "reboot and select proper boot device or insert boot media in selected boot device and press a key" and when I tried to install OS it does not display the hard drives to install operating system.please help

  Hello

  Check your cable connections. If necessary check with the manufacturer of the motherboard System Support
  and Seagate Support.

  Make sure that settings/settings (BIOS/CMOS) often F2 that you start the computer is configured to start at
  on the CD/DVD first in the boot order.

  Seagate - Support
  http://www.Seagate.com/support/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Keep having the message "Reboot and select good boot device ', but seems that there is a work around

  I've read other posts on this message in the community, but think that mine is in a different situation.

  A week ago, I started having this error message when I booted my PC (win8, 64-bit). Fortunately, I have the new bootable USB key. After that I tried everything I could think, (restore and refresh), this message always shows up when I start the PC. So I decided to do a complete reset to factory with the option State "delete all data".

  I was able to complete the procedure. However, I see new things,

  If I restart the PC, I can boot in normal mode, without the error message.

  If I turn off the PC, then turn on again, the error message is back. I found that there is something for the workaround. When the system boots, I hit 'ESC' key and 'remove' to go to the bios interface, go to the 'boot' page, change the order of boot on USB, then change it back to hard drive (so in fact that there is no change), press F10 to save and exit. Then, I can boot into normal system.

  Why is this? Anyone can help with this problem?

  Kind regards

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you get an error message when you work on your computer.

  This could happen because of changes made to your computer.

  I would like to know some information.

  1. What is the brand and model of your computer?
  2. Have you changed boot priority on hard drive?
  3. Did you change your computer before this problem?

  This problem may occur if your hard drive is not detected in the BIOS as first boot priority. You can go to the BIOS (Basic Input Output System)and change the boot drive order so that the hard drive comes first as a boot priority. You should be able to start Windows normally after you save it in this configuration.

  If you would like more information on the BIOS settings, consult the computer manual or contact the manufacturer for more information.

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this helps. Please let us know the results. We will be happy to help you further.

• Satellite C50-B-13N - error "Reboot and select good boot device."

  Hi all

  My laptop recently bought C50-B-13N moving 39 updates yesterday, when it crashed.

  Get back with me stuck in a loop continuous. After what seemed like the logical approach to reset to factory settings, I have
  seem to have accidentally deleted the data on the disk.

  I have now repeatedly received the error message "Reboot and select proper boot device."

  I tried the F12 approach to , but my Start Menu does not have this option.

  I'm frustrated that the new laptop played if bad, given that I have had Toshiba devices for about 10 years.
  In addition, I am disappointed that potentially serious consequences to remove the drive were clearly deprecated for me, before you start.

  Please give us a solution.
  The laptop is 4 months old.

  In addition, how can I start the process of an application under my warranty?
  A dissatisfied customer of experience to date.

  Kind regards

  CGI

  I seem to have accidentally deleted the data on the disk.

  Obviously the HARD drive recovery procedure is not possible now because the HARD drive recovery files have been deleted.

  I guess you have not created such recovery media as recommended in the user's manual.

  Well, in this case, you have a chance to order a missing middle of recovery and recover the laptop to factory condition.

  Means of recovery can be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Reboot and select good Boot Device problem - my PC does not start!

  Hi all

  Whenever I turn on my computer I get the message "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key.

  I checked the diagonistics material and these are the results:

  Test CPU-

  Hard drive: failure of the connection Test - Error Code: BIOHD1

  Memory - past

  I don't think that the issue is a faulty connection. My reason to believe so because I think that I had a virus on my computer (I was not able to confirm) I tried to delete the last time I was able to use the computer. Then I turned off the computer to restart, but unfortunately, that's when I got this error message.

  I had this problem once before (about 3 years ago) and I was not able to solve this problem, so I just stopped using the PC. Then one day my Dad turned on the computer (a few months later) and it worked all of a sudden.

  Anyone know what this problem is? How can I solve this problem?

  Any help is greatly appreciated! Thank you very much for your time and effort!

  Additional information:

  It was originally a windows 7 PC, but I have upgraded to windows 10, which is the current operating system.

  Product: HP p6620f

  I managed to start my PC again.

  I have unplugged all connections and left it that way for about 24 hours. Then I plugged everything back in and all of a sudden the PC worked again. I don't know if it will last, but right now it works.

  I'll write another post if something changes.

• Satellite M50D-A-10W - error "reboot and select proper boot device."

  I have a Toshiba Satellite M50D-A-10W passing me all nuts "reboot and select proper boot device."

  This has happened before and it was solved by ctr-alt-del and F12 to get into the BIOS where the date went back to some time in 2010 - after put so far and to change the boot device, everything worked fine... until the next day.

  Now I get the screen "reboot and select good boot device ', but the F12 key does not; I also tried F2... the message keep multiplying, no BIOS...
  Help, please!

  In some cases the BIOS is only accessible by pressing the button turn off force on the lower side of the unit.

  Info:
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  After that you were able to start the windows system, its highly recommended to update the BIOS as BIOS update would solve this annoying problem.

  Info:
  http://APS2.toshiba-tro.de/KB0/TSB4903N50000R01.htm

• Get the error message "send and receive reported an error (0x800CCC92): your e-mail server rejected your login. '. Check your username and password in your account properties.

  Get the error message "send and receive reported an error (0x800CCC92): your e-mail server rejected your login. '.  Check your username and password in your account properties.
  I'm using Outlook 2002 on the XP Pro operating system.

  It lasts for almost a year, but I managed to work around the issue since it was started using a different outgoing SMTP user name and the password.  (More settings, outgoing server tab, log in using...)  Now it has stopped working.

  There are four machines at this place and all suffer from the same problem.  I use a LinkSys RVS4000 router.  The previous Linksys router has also had the same problem so I replaced, thinking he can correct the problem, he didn't.
  Troubleshooting:
  a. I am able to recreate the account on another machine to a different place and it works.
  b. I can take an account of my machine, create in this place and it will not work.
  c. accounts deleted and created a new, did not
  d. has replaced the router to the place with a new Linksys router
  e. contacted support for ISP, (Time Warner), they accuse the hosting company
  d. contacted support for hosting of the company (HostCentric) they blame the ISP
  c. confirmed username and passwords are correct.
  e. There are 4 machines in this place with different addresses.  All started having this problem/error the same day within hours
  f. may receive emails cannot be sent.

  http://expwinproblems.blogspot.com/2010/11/error-messages-in-Outlook-when-send-or.html

• How do I repair: windows7 error reboot and select proper boot device?

  My computer is about 2 years old.  Sound works just fine.  One morning, I started it up and a black screen came with: reboot and select proper boot device or insert boot media in selected boot device and press a key.  Any key you hit it just kept announces the same message, I had to tough out.  As long as I start the computer with Del, F8 or F10, I can get the computer to boot. No matter what I change, it works for a few times then goes back to the same error.  Also it will not always wake up after he falls asleep.  I tried to do a repair of systems, but it does not work

  Hello

  1 do you have made no changes to software before this problem?

  2. you have the Windows 7 installation disc?

  3. what changes did you and have you been able to boot to the desktop after that?

  Method 1:

   

  I also suggest you to try the other options of WINRE (Windows Recovery Environment) and check.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Method 2:

  I also suggest you to check the drive for errors that it can cause a Windows to boot.

  Follow this step to do the same thing:

  1. Click Start
  2. Type: CMD, according to the results, right-click CMD-> click on "Run as Administrator"
  3. At the command prompt, type: chkdsk /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  The issue can also occur if the boot device is not correctly defined in the BIOS. Make sure that the hard drive where Windows is installed is selected as first boot device.

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  See also:

  http://support.Microsoft.com/kb/266283

• ASUS computer Unable to boot error "Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key." "

  Original title: ASUS computer problem

  This morning I slammed my hard cutting computer. This afternoon, when I went to get on a black screen appears and says "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key." When I go to press the same message poping maintains and does not allow me to go anywhere else. My computer also makes a click when I try to restart. Any suggestion would be appreciated. Thank you.

  Adam

  The 'Ticking' noise is indicative of an HD program.  You can made a brick out of it.  The Message on the selection of the appropriate boot device indicates the tilt of the computer 'See' the HD.

  You see the HD in the BIOS when you start?

• I have the same problem I've seen on this system already, but I don't see an answer, I get the error message no is "no active mixer devices".

  I get the error message is that I have no active mixer device and I cannot hear anything in the MSN Web site to itunes

  Type of computer?  You must go to the computer manufacturers website and download the correct driver. I.1

• In Adobe Creative cloud, I go to Apps and I get the error message undefined and I can't download anything, I'm on windows 7 64 bit.

  I use Adobe Creative Cloud, I go into Apps and I get the error undefined.  I can't download anything.  I'm trying to update the app, nothing.  I can even see what I downloaded previously.  I'm using windows 7, 64 bit.

  It worked well for me for up to this morning.

  Hi Renaze10 ~.

  It is due to do not have the administrator rights on the PC.

• I get the error message 646 and 643 for updates on 10/13/09. What can I do? Do I really need these updates.

  I keep getting error for these updates messages - error codes are 646 and 643.  Do I need these updates?

  Microsoft .NET Framework 1.1 Service Pack 1 update security for Windows 2000, Windows XP, Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2 (KB953297)

  Download size: 13.5 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=127769

  Help and Support:
  http://support.Microsoft.comSecurity update for Microsoft Works 8 (KB973636)

  Download size: 4.6 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A vulnerability of security in Microsoft Works 8 that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.

  More information:
  http://www.Microsoft.com/technet/security/bulletin/MS09-062.mspx

  Help and Support:
  http://support.Microsoft.com/kb/973636

  Update of security for the viewer Microsoft Office Visio 2007 (KB973709)

  Download size: 2.5 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A vulnerability of security in Microsoft Office Visio Viewer 2007 could allow arbitrary code to run when a malicious web page that is updated it is open. This update resolves this vulnerability.

  More information:
  http://support.Microsoft.com/kb/973709

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  Update of security for Microsoft Office System 2007 (KB972581)

  Download size: 1.0 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A 2007 Microsoft Office System security vulnerability could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves the vulnerability so that the 2007 Microsoft Office System documents are managed appropriately.

  More information:
  http://support.Microsoft.com/kb/972581

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  Update of security for Microsoft Office System 2007 (KB974234)

  Download size: 525 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  This update resolves a problem that can cause programs that use Outlook view with Forms 2.0 control, such as Microsoft Office Outlook with Business Contact Manager, stop functioning as expected after installation of update of security for Microsoft Office Outlook 2007 (KB972363).

  More information:
  http://support.Microsoft.com/kb/974234

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  Hello

  Try this 1st to see if it helps:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary:

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it. Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the preparation tool update for Windows Vista for Windows Server 2008 and Windows 7 system
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the groups of the Agency who could
  have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• HP Pavilion p6204y Error Message - «Reboot and Select...» »

  I get this message only when I use my Western Digital WD7502AAEX 750 GB hard drive.  I have run chkdsk, WD, CrystalDisk diagnosis, whatever you can imagine.  I went into the BIOS and made sure that this drive is the first boot device.  When I install Windows 7, I use the ESC key to select the DVD player as a punctual start only to start the installation process.  I don't have this problem with my Western Digital WD20EARS 2 TB hard drive.  Is there something with the 750 GB drive I have to do (riders, etc.) to solve the problem with this error message?  I noticed in the BIOS that the hard drive controller mode has been defined RAID even if I don't than one hard drive in the computer at the same time (either the WD7502AAEX or the WD20EARS, but never both at the same time).  Is the default setting for my computer out of the factory RAID?  Four days after I installed the WD7502AAEX, I installed a new sound card of the computer.  Maybe if the RAID is not the default setting, the installation of the sound card has caused the setting to change?  The original in the PC hard disk had a score of 3.0 Gb/s transfer, while the news is 6.0.  This may cause the problem?  Help!

  Hello:

  The default setting for your PC would be the best RAID setting.

  There are no jumpers to change on the disc or the motherboard.

  I had the same problem with a HP dc7800 with the WD Caviar Black 500 6.0 GB/s drive and the Q35 chipset.

  I could install W7 on it, but on reboot, the BIOS reports no disk.

  I couldn't understand it.  I took the Seagate 1 TB 6.0 GBPS drive on my HP 8200 Elite and put it in the dc7800, and it worked perfectly fine since.

  I put the WD Caviar Black 500 GB drive in my 8200 Elite and it worked perfectly as well.

  I have to this day, no idea why this has happened.

  You can change the IDE BIOS and see if it works, but that will slightly degrade the performance of your hard drive.

  Paul

• Cannot start Windows XP. Receive the error message 'drive not found '.

  I HAVE a LAPTOP of SATLE TSHBA PLU I CANT ACCESS MY WIN XP MCH ED IL SAY chkdsk IS NOT FOUND AND SYSTEM only has NO IMAGES PLS HLP

  TSHBA C1100

  Call Toshiba and see if they will send you a new family installation CD for Windows XP for this laptop (at a cost).