Similar Questions

• Using ChangeDetectionEvent with the NI USB-6259 housing

  Hello

  I am very new to labview and LabWindows, so maybe it's very trivial to solve.

  I would like to perform an action (change some elements of the user interface) whenever I get a rising edge of a TTL signal.

  I hoped to achieve by following the example of ReadDigChan-ChangeDetectionEvent, and by defining a DAQmxRegisterSignalEvent() front on one of the digital input lines, but I can't even use the example for my

  USB-6259 (BNC).

  When I try to perform detection of changes on the lines from the port 1 and 2 I get

  Modalities indicated do not support change detection.  Select the lines that support the detection of changes. Device: Dev1 physical Channel: port1/$line0 the task name: _unnamedTask<0> Code of State :-201020

  I missunderstand something? Should the digital in ports on the detection of change of 6259 support?

  When you try the same thing with port0 the application hangs for a long time and threw just a message saying that

  DAQmxReadDigitalLines() timedout.

  I hope this is enough information to answer the question. If not, what else do you need?

  Thank you

  Manual

  Hello

  It seems that the USB-6259 does not support the detection of changes.

  Link:

  In NOR-DAQmx digital change detection

  http://www.NI.com/white-paper/4102/en/#toc1

• Registration and getting started with the INK HP INSTANT

  Registration and getting started with ink HP Instant

  Note: your printer must be connected to the Internet via a wireless connection.

  How does that you will always have ink HP? Your printer uses Internet to let us know when to send more ink. Here's how you can get all the ink you need, delivered to your door.

  1. Buy an eligible printer.
      
  2. Enroll in a plan based on the number of pages you print.
     Ink, cartridge recycling and transport are included.
     No annual fee, change or cancel your plan anytime.3
  3. We'll will ship special HP Instant cartridges.
     Our cartridges have more ink than the standard HP ink cartridges, so you'll replace them less often.
  4. Billing service and begin after inserting your first instant HP ink cartridge.
      
  5. Your printer will tell us when to send handwritten entry.
     Your service is not based on how many cartridges you use, so print as many pictures of high quality that you want.

  • You will always have ink before you need it.
     
    

  LoneStarBob wrote:

  I received my first ink (three colors) of HP cartridge. check the two original instant of ink in the printer cartridges they show two 3/4 full (identical). Puzzeld just why black not sent.

  Hi LoneStarBob,

  I'm going to private msg you on it to help track.

  Thank you

  Ciara

• Getting started with the api perl?

  Hello

  I'm after a pointer or two in the right direction to start with the perl api for vmware - I have read around and ended up do not know on what api should I use. The ESX environment is v2.5.

  My requirement is to collect performance data of the computer (cpu/mem/disk/net) virtual guests and some configuration data (disk to lun map/mem & cpu allocations etc.).  I say this only in case it affects the choice of the API.

  I've also seen some docs/examples of scripts that mention a list of attributes that can come from the guest - these come completely out somewhere just in case I need more later?

  I've seen talk about vSphere cli for perl 4.0 (sounds weird like perl 5.x now), also version 1.5 and 1.6 of the perl api.  VIX too.  I guess that vmware have changed the names that they develop products, but since I was at the VC 2.5 I know of course at what point in the cycle of life, I should be in.  If there is a readme file that explains this lot just let me know.

  Thanks in advance.

  First of all, definitely take a look at this page: http://communities.vmware.com/community/developer/forums/vsphere_sdk_perl in the section of the resources on the right.

  It is a large document showing you the details of how the perl Toolbox not Accon vSphere SDK for Perl, really worth to go through the documentation:

  http://www.VMware.com/support/developer/viperltoolkit/doc/perl_toolkit_appliance_idx.html

  If you are familiar with the esxcfg-* commands, whereas you'll notice through the vCLI/RCLI, which uses the vSphere SDK for Perl has the same exact command set but the installer to help make managing remote:

  http://Engr.UCSB.edu/~duonglt/VMware/#vmware_rcli

  http://Engr.UCSB.edu/~duonglt/VMware/#vmware_vcli

  There are additional utilities that come with the vCLI/RCLI, take a look here for list:

  http://Engr.UCSB.edu/~duonglt/VMware/#vmware_viptk

  As you know, these are all Perl scripts, which means that you can open them and see how it is implemented and how they use the vSphere API, the reference for the API doc is also very important as:

  vSphere 4.0 - http://www.vmware.com/support/developer/vc-sdk/visdk400pubs/ReferenceGuide/index.html

  VI 3.5 - http://www.vmware.com/support/developer/vc-sdk/visdk25pubs/ReferenceGuide/index.html

  I think the best way to learn it is to start playing with some of the scripts canned and to make it even easier to have an environment that is all set up for you with the vCLI and vSphere SDK for Perl, you can download the vMA that is a management assistant from VMware to remotely manage your systems (i) ESX and vCenter.

  The version of Perl that is used is in fact 1.6 but the designation of vCLI is 4.0 which is in conjunction with release of vSphere 4.0, it has nothing to do with the version of Perl (Yes the naming/numbering really sucks and confuses a lot of people)

  Here is a nice document that made the breaking of all the various API/SDK/etc.: Getting Started with vSphere SDK - Update for SDK 4.1 release

  VIX is the main for the management of comments, it is intended to be used or can be used in conjunction with the vSphere API and you can find more information on the VIX.

  Also, here is a code example for vSphere SDK for Perl: http://communities.vmware.com/community/developer/codecentral/vsphere_perl and vGhetto scripts repository

  Well, I'm sure it is a handful of information and it will take some time to digest, but still the best way to learn is to start playing with it and you'll get a kick for him.

  Good luck and happy to script

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• I get BSOD with the key USB TV Tuner PX1211E-1TVD

  Hi all

  I just bought the model tuner TV USB Toshiba px1211e-1tvd and whenever I turn it on I get a blue screen error on my hp Pavilion dv6821el pc... dv6000 series.

  I tried to update the BIOS and the driver of my pc's display, but without results...

  The USB device is properly installed and the program (savvy tv) included with the cd as well, but I still get the Blue error screen...
  The operating system is Windows Vista...

  What can you suggest me to do folks?

  Please... I need help :-(

  Hello

  The BSOD appears usually due to a hardware problem problem or software commutabilite.
  I think in your case it s a software problem and I recommend updating the driver.

  The new driver could be found on the European driver Toshiba page in the Options area.
  On the driver page choose this:

  * Options-> Office Accessories based-> tuner TV USB hybrid TV Tuner Windows Vista 32 bit *.

  There you can find Savvy TV driver.

• Getting started with the extension of the iAd

  Hello

  I recently bought SAI extension for ios package of slag and can't its implementation.

  I have followed the Getting Started document, but I am not having any joy. I have attached a few screenshots to show how it is implemented and problems.

  (1) library of API included

  

  (2) code in the first frame of the test app file

  

  (3) errors received when publishing

  

  (4) the errors received when private is underwritten

  

  (5) when I disable the strict mode and publish it, I just get a blank white screen when viewing the app on my iPhone.

  Help, please!

  Thank you!

  Your problem is there in error. Looks like you are coding on the timeline instead of the class. That's fine, but that means getting rid of things linked class as a private function and extend class stuff. It's what your first mistake. When you do this, you receive the second error, here I can see in your code you have set up listeners for these 2 functions, but you do not have real onBannerAdLoaded and onBannerAdFailed function. Find these two in the docs or below, add them to your code.

  function onBannerAdLoaded(e:IAdEvent):void

  {

  trace ("banner loaded.");

  }

  private void onBannerAdFailed(e:IAdErrorEvent):void

  {

  trace ("banner ad failed");

  }

  The last error is an error on your part. In line 18, you have an ad in lowercase as SAI , it should be SAI, don't forget to flash is very sensitive. So change for this.

  IAd.iAd.createBannerAd (IAdBannerAlignment.TOP, IAdContentSize.PORTRAIT_AND_LANDSCAPE);

• Laptop does not start with the connected usb device

  Hello
  Voila, I have a Sp6100 Pro Satellite, when I try to start whith a usb printer is connected, the laptop does not start. I have the latest version of the bios 1.90.

  THX,
  Barzot @+.

  Hello

  What you mean with start won t at all? Is there any kind of reaction if you press the power button / stop?

• Getting started with the Pro user interface customizations

  Hello

  I have to integrate into a home content management system where there is now a requirement for people to be able to edit PDF files. Before which has not been authorized.

  So what I need is the ability to customize the interface of Acrobat with a button or a menu to save the current active document in Acrobat Pro XI to the management system documents via http-based interface. This button is obviously an extension of the application, not an extension of PDF since it must be available for all pdf documents. After you have created and tested this feature, I need to deploy it in my organization.

  Now, my problem is that I have no idea where to start. In my view, the documentation is hidden in the extreme. There is no "Customizing the UI" with steps like 1 / Select this option, 2 / Add your Javascript, 3 / Save to file in the following directory... Honestly, I find the documentation next useless.

  If anyone can recommend a tutorial or a good book on it, I would be very grateful.

  There are many examples of code in Acrobat JavaScript API Reference, you just look under the relevant methods. But it doesn't have a 'sample' or 'tutorial' section, because it's a documentation, not a guide.

  You can find a lot of useful tutorials on this Web site: https://acrobatusers.com/tutorials/filter/search&category=13&channel=tutorials/

  For example, it explains how to add a customized Acrobat menu item: https://acrobatusers.com/tutorials/add_custom_menu_items

• Filter low pass analog (anti-aliasing filter) external to the NI USB 6251 housing

  Hello everyone!

  -I m trying to acquire an analog signal of tension (high frequency content) using a connected to an edge NI USB-6251 BNC-2110. I learned in this Labview Forum that NI USB-6251 has no analog low-pass filter programmable (or anti-aliasing filter), so that I can't help but jitter when scanning my signals. For my application, the cutoff frequency of the analog low-pass filter must be equal to 100 kHz or MORE (maximum of 500 kHz). A possible solution to solve my problem, would be to work with an external analog low-pass filter before you scan the voltage signal. Based on this I'd like to know:

  (1) national Instruments develops analog external filters? I need a filter which also has one output, analog, so that I could send also the low-pass analog filter filtered signal to my NI USB-6251 box to scan correctly it!

  (2) what model of external low pass filter would be compatible with the NI USB-6251 housing?

  Any help would be much appreciated!

  Best regards!

  Hello

  all high resolution of the M series (628 x) cards are equipped with a filter low pass which can be enabled or disabled programmatically. For the anti-aliasing filter feature, examine the boards of National Instruments DSA (dynamic signals Acquisition) acoustic and vibration measurement
  currently the NOR 9221, 9225, 9227, 9229, 9233, 9234, 9235, 9236, 9239 and 9237 C Series modules feature anti-aliasing filters. These modules are intended for the high accuracy measures for which anti-aliasing filters are a necessity.

  Houssam Kassri

  OR Germany

• How to get started with vmware in the SMB

  Hello world

  I read through this forum to help me understand more about vmware. I think that I have only a very basic understanding of vmware, so ask your recommendations for the project, I'm about to start.

  We are a company SMB with 3 offices in 3 places. We are about to implement a new software which runs on separate SQL 2005 servers in all 3 offices.

  I intend to provide all 3 offices with a similar configuration and have the servers SQL replicated during the night.

  The necessary servers are SQL server, file server and license server.

  The material I've been watching is DELL R710 or PE2950III PE. The number of people using the software would be about 5 to 6 for each office.

  Now, my goal is to move finally all our servers in a virtual machine, but to keep it simple for now, let me just start with what it takes for my project.

  My plan is to buy 1 server for each office and make them run 2 VMs each (SQL, Server license). With respect to the file server, I could use the local storage of the physical server.

  I am aware that this configuration will give me any redundancy in the case of a material error in the physical machine, but I'm hoping to expand my setup with the budget for the next fiscal year and buy the redundant servers.

  So I'm trying to get to the top and now works with spending too much on the material, but I still want to be able to move to a business solution from vmware that allows me to move VM is 1 physical machine to another, etc..

  I wonder now, what software to use for my project. I've been mainly reading on ESX and ESXi. I was looking at the license to the Foundation, but not sure that ESXi makes much sense at all if I have my VMs on 1 physical computer only.

  Then the VMware Server would be a better solution for me? If I decide to VMWare Server, can I still upgrade ESXi later?

  If I go with ESXi, I understand that I can have embedded it or installed. I guess that I can't use the local file storage when using the embedded version of ESXi?

  If I install ESXi, however, I have to start in Win Server 2003 or 2008 first that requires a separate license again and then install ESXi on its own partition on a Raid1 array. I would then use a Raid 5 for all virtual machines.

  Also with ESXi, would I be able to upgrade to a later version of ESXi with my setup? I guess that all the virtual machines must be stopped for an upgrade to ESXi?

  Appreciate any advice.

  See you soon

  Yes, this seems a sensible approach. As you are new to do this of course, you understand the different options of ESX here because it can be a little confusing to start. Going with Vmware server path would be much more disruptive in the future that you will suffer more downtime to make the change. Just to be clear, VMware Server is one where we have an application that runs on Windows (or Linux) to provide the functionality of virtualization. ESX or otherwise runs directly on the hardware.

  ESXi free edition, this may be an option for you initially, but you can not manage it with vCenter. You must use the VI Client directly to each box, failed to get the enterprise as vmotion etc features. With a single server, initially, this could be a good starting point.

  With paid for ESX you will have many other options, note the ESX layer features are essentially the same although we allow them just allows you to add the other stuff by taking the commercial offer.

  At this point it is assumed that you have vCenter somehow, so you will need a Windows Server to the host which can be a virtual machine if you want. If you started with the edition free is simply a matter of connection of the device of vCenter for ESXi nodes and they get activated with the management features - no downtime is necessary.

  Then you have 2 choices for ESXi

  (1) install on HDD or USB

  (2) buy what it come pre-installed with your server.

  The question is then what edition you purchase. We have some packages SMB has been called Essentials or Essentials more, but they are limited to a maximum of three servers altogether, it would be ok for you in you're first scenario but if you then want to make each site two nodes, so you'd not nowhere to go, a nd currently is not a licensing mechanism to upgrade , that's why I suggest you seriously consider 'Standard '.

• Firefox 8.01 - automatically load the "Getting started with Mozilla... page.

  Firefox 8.01 - whenever I starts, it loads automatically the "Getting started with Mozilla...» "the my home page Tab. How can't we open the tab "Getting started...". » ?

  Hi ricklord303,

  You should take a look at the Knowledge Base How to set the home pagearticle.

  There are the steps in this article to reset your preferences on the default home page. I would try everything first to clear all strangeness. If it works, you can try to set your homepage again to your personal preferences.

  If this does not work you should look at this article on this specific issue and Preferences not savedarticle.

  Hope this helps!

• The tab "Getting started with Mozilla Firefox" (as well as my default homepage on another tab) charge whenever I start Firefox. How can I stop this tab open at the start of the program?

  The tab "Getting started with Mozilla Firefox" (as well as my default homepage on another tab) charge whenever I start Firefox. How can I stop this tab open at the start of the program?

  If the above did not help, then also see the following articles for more suggestions:

  • https://support.Mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
  • http://KB.mozillazine.org/Preferences_not_saved

• How to stop the tab 'Getting started with Mozilla Firefox' to open every time I open FF?

  Everytime I open FF, the tab "Getting started with Mozilla Firefox" opens. I checked and it is not in my list of homepage.

  If I open any additional windows, it does not open.

  But, once I close all the and reopen it again, the tab opens.

  I had a similar problem with some addons (ietab) do the same thing.

  I found the fix for it.

  About: config, filter for 'Start '

  Ones you want to should appear at the bottom.

  Startup.homepage_override_url and startup.homepage_welcome_url

  Double-click on each one and delete the text string. Close and reopen the window to check that it worked.

  As I deleted them both at the same time, I'm not sure who was the culprit. So, I suggest starting by striking first and tests before deleting this one.

• Everytime I open a new window or refresh a getting started with firefox page opens with her. So, whenever I go to my homepage for example getting started with firefox opens along the coast in a separate tab.

  Everytime I open a new window or refresh a getting started with firefox page opens with her. So, whenever I go to my homepage for example getting started with firefox opens along the coast in a separate tab.

  This has happened

  Each time Firefox opened

  == I have this computer.

  You are welcome

• loaded Microsoft combat flight simulator ww11 europe series. Unable to get game start with the joy stick. game with keybord works. gamepad is new logitech 3d pro extrem

  loaded Microsoft combat flight simulator ww11 europe series.  Unable to get game start with the joy stick.  game with keybord works.  gamepad is new logitech 3d pro extrem

  Hi Li-ngme,
   
  (1) have you installed drivers for the joystick correctly?
   
  It seems that the gamepad drivers is not updated for windows 7. Let us know if the gamepad work on other games under Windows 7.

  Try to access the link below and install the drivers for gamepad for windows 7 and even install as an administrator.
  http://www.Logitech.com/index.cfm/441/291&Hub=1&CL=GB, in? WT.z_sp = Image

  If this does not work, try to contact Logitech and check if they have updates on this for windows 7.
   
  ThaThanks and greetings:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.