Getting the blue screen error

Similar Questions

• I get the blue screen error - error - Stop 0X0000008E

  -Stop error 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000)

  Hi I get the blue screen error - error - Stop 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000) and cannot use the pc in safe mode. I have XP - OS. I really don't want to reformat the HARD drive and you want to avoid reinstalling as much as possible

  Hi aromaveda,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• I get the blue screen error that says CONFIG_LIST_ failed

  I get the blue screen error that says CONFIG_LIST_ failed with the error stop

  0 x 00000073 (0xc000017D, 0 x 0, 00000001 00000001, 0xF90EEBB8)

  and no FAILURE, but also last Config mode. are not able to enter either. PS my CD rom drive has been inoperative for a long time so can't use reinstall disk

  and available good PC has no floppy. Can I use a flash drive to copy all the files needed XP recommended installation. disc?

  Hi philadel37,

  Unfortunately, you can not use the flash drive to restore system files or to solve this problem.

  You will need to use the Windows XP installation disk to perform a repair of Windows XP installation.

  See the article for more information about the Windows XP repair installation.

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• Get the blue screen error saying windows has shut down to prevent damage to this computer

  My sons computer is BLUE with a message saying that windows was arrested for not to damage your computer. And it is stuck on that screen. Do you know why windows shuts down his computer?

  * original title - my son computer is blue and a message indicating that windows has stopped to avoid damaging his computer. And he is not able to do anything. Do you know what it is? *

  Hello

  1. what operating system is installed on his computer?
  2 did you the hardware changes to his computer before the question?

  Perform the steps in the article and see if the problem is resolved or not.
   

  Resolve stop (blue screen) error in Windows 7

  Also check the event viewer for error logs

  Open event viewer

  What are the information contained in the logs of the event (Event Viewer)?

• Get the blue screen Error Message: 0x116_TdrBCR:2_Tdr:2_IMAGE_nvlddmkm.sys and Vista crashes

  Original title: crashing in Vista, something with the drivers I think

  At startup, I see a message that says: Media test failure.  I can sometimes to vista in normal mode, but then it's a matter of time (not too long usually) before the screen flickers and goes black.  I then turn off the power and restart.  Once it says graphics driver NVIDIA has stopped working properly, I've updated my driver and now it says it's working properly, but I still have the same problem.  My bucket of blue screen error is: 0x116_TdrBCR:2_Tdr:2_IMAGE_nvlddmkm.sys any help will be greatly appreciated

  Hi zambetti,.

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This error indicates that an attempt to reset display driver and recover a timeout failed.

  Check out the link:

  http://msdn.Microsoft.com/en-us/library/ff557263%28VS.85%29.aspx

  Since you've already tried to update the Nvidia drivers, you can try to uninstall and reinstall the same check.

  You can try to uninstall and reinstall all the programs and features Nvidia drivers and Device Manager.

  Step 1:

  Uninstall the audio drivers from programs and features

  a. click on start

  b. type appwiz.cpl in the start search

  c. search for all driver packages, Nvidia, right click and uninstall.

  Step 2:

  Uninstall the drivers from Device Manager.

  a. click on start

  b. type devmgmt.msc in search, and then press enter

  c. in find Manager device for the device, right-click on it and select the option uninstall.

  After you remove the drivers of these two places, you can try to remove the NVIDIA folder and restart to see if that solves the problem after I installed the generic drivers.

  Step 3:

  To delete the folder:

  one. Click on start and Type C:\windows\system32\drivers folder in start search

  b. click on drivers and select nvlddmkm.sys

  c. right click and rename nvlddmkm.sys in nvlddmkm.sys.old. or delete.

  d. restart the computer and check.

  You can also check the manufacturer's website and download the latest drivers from Nvidia:

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I get the blue screen error after installation of Visual Studio 2010 Professional Test Edition. Help?

  A brief overview of ALALA situation and how it happened:

  1. I went to microsoft.com and download Microsoft Visual Studio 2010 Professional Trial Edition

  2. I opted to use the Installer web pro (4.3 MB) and it correctly installed, restarted and completed the installation.

  3. I opened one of my previous Visual Studio 2008 Solutions and it prompted me to convert the solution.

  4. it is the solution converted successfully and open well.

  But now for some reason any my computer started to give me a blue screen. It forces the computer to restart, and then it connects back with errors:

  "The system has recovered from a serious error, a log of this error has been created"

  "Error signature".

  BCCode: 1000007f BCP1: 00000008 BCP2: BA348D70 BCP3: 00000000

  "BCP4: 00000000 OSVer: 5_1_2600 SP: 3_0 product: 256_1.

  "The following files should be included in this error report:
  C:\DOCUME~1\DSmith1\LOCALS~1\Temp\\WER81ad.dir00\Mini10311-04.dmp

  C:\DCUME~1\DSmith1\LOCALS~1\Temp\\WER81.ad.dir00\sysdata. XML ".

  It's about every 30 minutes now. It only started after installing Visual Studio. Any help?

  Hello

  You can check this link:

  General causes of errors "STOP 0x0000007F"

  http://support.Microsoft.com/kb/137539

• When you try to Watch youtube videos, get the blue screen error: 0x0000008E (0xE0000001, 0BA460925, 0xA8919820, 0x00000000)

  I can't view videos such as youtube without my computer locking with a blue screen and error message: 0x0000008E (0xE0000001, 0BA460925, 0xA8919820, 0x00000000) how correct this and what it means? I am running windows XP. Thank you

  Hello

  · You receive this error message only when you watch videos online?

  · Do you remember any changes made on the computer before the show?

  · What is the number and the model of the computer?

  · What is the service pack installed?

  Check the status of the card/video display adapter installed on your computer.

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  (c) in the Device Manager window, look for the screen reader and expand the drive, double-click the sub element to check if an error message or error code is listed.

  You can also check out the link below: general troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E": http://support.microsoft.com/kb/945658

• In Windows Xp SP2, I get the blue screen error KERNEL_DATA_INPAGE_ERROR

  Technical information:

  STOP: 0XC0000007A (0XC000000E, 0XCB6D59A13, 0XC02DB564, 0XC57671860)
  PortCls.sys - AddressB6D59A13 base at B6D3F000, DateStamp 40574e49
  Beginning physical memory dump

  Your plant is associated with a low-memory exception.  It's either your Ram, or more likely a driver.  You have some very old drivers including 2007 ESET.  I would like to update the drivers below AND update of Service Pack 3
  

  BIOS.sys 16/03/2005 02:23:52
  C:\windows\system32\drivers\eamon.sys 2007-12-21 03:17:22
  fetnd5.sys 07/20/2001 07:40:24
  ParVdm.SYS 17/08/2001 16:49:49

  How to find drivers:
  -Google search for the name of the driver
  -compare Google results with what is installed on your system to determine on what device/program, it belongs to
  -Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
  s ' there is difficult to locate them, post back with questions, and someone will try and help you find the right program
  
  The most common drivers are listed on this page: driver reference

  http://www.carrona.org/dvrref.php

  -Driver manufacturer links are on this page: http://www.carrona.org/drvrdown.htm

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• How can I get rid of the blue screen error?

  Original title: Windows Vista Start does not

  Hello
  I have Windows Vista Home Premium, and I've had it for 5 years now (2006-) the problem is that I don't know what happened, but when it restarts, I have two options;

  Startup Startup Repair (recommended)
  Start Windows normally

  When I choose "Start Windows normally", a blue screen appears with an error message and disappears quickly, leading me to restart my Vista again. However, when I select Launch Startup Repair tool, it takes a while and after a bit, it ask if I want to send the error to microsoft (recommended) and I choose Yes, and it takes a little more time to look for a solution. Finally, a list of appropriate actions appear;

  Startup Repair; I tried this 8 times now, and he cannot find a solution, leading me to reboot once more.
  System restore; I tried ALL the dates of the restoration, and none of them worked. I got an error saying: it cannot restore.
  Restore the computer; 1. I don't have a backup drive (it's a shame, I know) and 2. I don't want back up and lose all my files.
  Windows Memory Diagnostic tools; I checked all hardware error, and none have been found.
  Command prompt; I don't know what to do with it.

  If someone can PLEASE help me, I would be VERY grateful. I have very old memories and photos on this computer and I don't want to lose these. I am begging for someone to help me, and my last priority would be to forget all these photos and files and move: (.) Oh and I tried running safe mode, by pressing F8 while the computer restarts and I've highlighted Mode safe mode with networking, but it gives a quick overview of a blue screen just and hangs on reboot. Please help me on the procedure to follow for the good of my IMPORTANT files and memories.

  Thank you, in advance.

  Hi AffanX,

  Method 1: Try to disable automatic reboot in the menu start-up advanced options, and then try to capture the blue screen error message, see the link below:

  Advanced-Startup-options-including-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode 

  Method 2: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  After disconnecting all external devices, run the Startup Repair

  Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540

  You can see the steps below for more information

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  (Article above applies to Windows Vista)

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• get the blue screen for video ati3duag.dll and also 0x000008E (0xc0000005), 0xBF0C8855.

  ERROR MESSAGE
  I get the blue screen for video: ati3duag.dll, BFO72000, time stamp 33fb6e2af. How to find & fix the problem? Speak not disable bios memory.

  Also I get: 0x000008E (0xc0000005), 0xBF0C8855.
  This happens when I want to watch a video.
  

  
  
  I use windows XP Home Edition

  Thank you
  Laurie
  

  I guess you have a problem with
  your video driver. You may want to update or
  It may have been a version that your
  hardware has problems with.

  Do a restore of the system in Mode safe for a time
  before the problem started, may be worth a try.

  See the following articles:

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  How to restore a Windows XP system to a previous state using system restore
  http://bertk.MVPs.org/

  (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

  How to start safe mode in Windows XP
  http://bertk.MVPs.org/html/SafeMode.html

  Good luck...

• How can I stop the blue screen error caused by sffp_sd.sys

  Since the middle of the latest version of windows aprils has updated that I regularly get the blue screen... The last was 26/05/12 16:30...

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  STOP: 0X000000D1 (0X00000002, 0X00000000, 0X00000008, 0X914E8774)

  BTHUSB Device bthport.sys - 914E8774 address, base at 914E5000, Datestamp 4db03738

  Hello

  BTHUSB Device bthport.sys and sffp_sd.sys are the two components of Windows that means something else led him into
  Fault. First thing I would do is update the BlueTooth drivers. Check with the system manufacturer (mother's support-
  the Board Maker for systems (custom), their documentation online and drivers and ask in their forums (if any)
  known issues and/or / the real peripheral manufacturer support site. (See driver update methods in the next
  message.)

  ===============================================================================

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ==================================================================

  BCCode: D1 0x000000D1

  Think video drivers especially if it may be others. Refer to the section of driver in my credits
  methods of troubleshooting blue screen below. BIOS, chipset of low level drivers and
  antispyway/antivirus/security programs can also cause this. Check the resolution of the problems and
  When you arrive at the driver and tests of memory sections do reference to generic methods in following
  message and then back to the if necessary troubleshooting tool.

  BCCode: D1 0x000000D1

  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

  
  BCCode: d1 0x000000d1<-- read="" this="">
  * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I did a factory restore and still get the blue screen message.

  Separated from this thread.

  I did a factory restore and still get the blue screen message. Windows says it is searching for a solution, but is never a solution. What can I do?

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA8004A7E1D8
  BCP3: 00000000B 6000000
  BCP4: 0000000000010015
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\050515-27159-01.dmp
  C:\Users\papreps\AppData\Local\Temp\WER-120136-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Hi papreps,

  Thanks for posting your query on the Microsoft Community.

  As the posts above mention, the problem comes from your drivers.  Crashes BSOD (Blue Screen of Death) are usually caused by bad drivers (manufacturer code) and incorrectly blamed on the operating system. Make sure you have the latest chipset drivers installed with the latest version of the BIOS.

  I suggest you to download and install the latest drivers from the manufacturer's Web site.

  Try the procedure described in the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  , Note 1: Running chkdsk on the drive if bad sectors are found on the hard drive, while the bad sectors can be refunded but there may be loss of data.

  Note 2: Data or files that are infected by malware could be beyond cleaning and must be completely deleted to preserve the integrity of your system, which means that there could be a risk of data loss.

  Keep us posted on the State of the question, we will be happy to help you.

• Help to fix the blue screen error: STOP: 0x0000007A

  Original title: I get the BSOD on my Dell Inspiron 14 stop information is at the bottom.  What means this dose-specific code and how can I solve this problem?

  STOP: 0x0000007A (0xFFFFFFFFC0000056, 0x0000000058DB3860, 0xFFFFF8A000E42A48, 0xFFFFF960001E082C) he begins again each time after it happens like nothing ever happened, but I don't want my computer any crash if there is an easy way to understand what it means and set it would be nice.

  Hello

  Here are some of the more general methods that could help solve the problems of use as
  necessary (same as in the link below).

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
  This would help. Such as ITC and 4 others entered at the bottom left. And another error
  information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">