Getting the error "the device reported unexpected or invalid data for a command. (oxC0AA02FF) when you try to create the system repair disc

original title: error 0xC0AA02FF

I try to use a "USB" "cruzer" to create a disc repair system, but when I click on this drive to create it I get the following error message:

"The device reported unexpected or invalid data for a command.  (oxC0AA02FF)

Hello

What method did you follow to create the system repair disc?

I suggest you to create the system with different USB repair disc and check if it helps.

Means all try the methods and check them off below if it helps.

Method 1:

Try to put the computer in a clean boot state, and then check if it helps.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135

Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

Method 2:

I also suggest you to perform check disk (chkdsk) on the computer and see if it helps.

http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

Note: You may lose a small amount of data while performing the check disk.

I also inform you that the data on the USB key will be lost. You should take a backup.

You can also check with the reference article below:

http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

Tags: Windows

Similar Questions

  • When you try to create a system image, receive the error code 0 x 81000019

    Get the error code when you try to create a system image on a 900 + GB hard drive with 900 GB of free space. Keeps telling me that there is not enough space to create the image of the shadow. I'm trying the disk image has only 40 GB of data. What is going on? Using Windows 7 64 bit Pro.

    Many hours of searching the Web for answers about a year ago, said that relatively few people have this problem and proposed solutions in the forums have been complex, machine dependent and seem to fail for most of the people who have tried a fix...

    So when I gave up and called Microsoft... they told me to take my problem to anyone assembled my computer...

    The man who built my machine told me not to worry, simply store all my files on the cloud, as he does...

    So now I store my important stuff on a spare drive, we have installed in the box, go to live with the inability to make appropriate backups and restore points...

    All my old computers is standard backups without any hassle... Just this new machine with Win7.

    (The only "new" thing was a disc SSD C... can't believe it would make one difference either, other than speed... and many people use them in 2011...)

  • Get the error (0 x 8078119) when you try to create a system image in Windows 7

    Original title: shadow copy volume
    Hello

    I currently have problems with creating a system image, because it comes back with the error (0 x 8078119) now I know it's, it's to do with the lack of disk space of 100 MB (startup disk or something like that) but with mine I have 62% of free space that is 63 MB available space for me (Please note the 100 MB drive for me is 102 mb)
    so I was wondering if anyone can help, because I had a virus before and ended up losing everything, that I don't really want to breed

    Hi Jugganourt,

    Please see the troubleshooting following thanks Divya R:

    Step 1: Check if the shadow copy Volume service is running.

    1. Click Start and type services.msc in the search box

    2. double-click on the Volume Shadow Copy Service.

    If you receive a Configuration Manager message, click OK.

    3. in the Startup Type list, clickAutomatic, and then click OK.

    4 services nearby.

    5 restart the computer.

    Step 2: Open Event Viewer to check the exact error message:

    Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

    For more information, see:

    What are the information contained in the logs of the event (Event Viewer)?

    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

    Check out this link to open the event viewer:

    Open event viewer

    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

    Open event viewer and navigate to the following location: applications and services Logs\Microsoft\Windows\WindowsBackup\ActionCenter.

    Step 3: You can also generate a log file by following the instructions below and send us the details.

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

    Back up the registry
    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    1. Click Start-> Run-> type regedit.exe.

    2. navigate to HKEY_LOCAL_MACHINE NT\CurrentVersion\Asr, create a new key called LogFileSetting.

    3. under LogFileSetting, create a new DWORD value called EnableLogging.
    Right click on this value, click on edit and then type 00000001 (hexadecimal)
    or 1 (decimal).

    4. under LogFileSetting, create a new string value called LogPathName.
    Right click on this value, click on edit and then enter C:\asr.log.

    5. then, to reproduce the error. You should have a file called asr.log in c:\

    6 copy the content and after us.

    Thank you!

  • Get 0x800700B7 error code when you try to create a system restore point.

    Original title: could not create a system restore point.

    Running Windows Vista and trying to set system restore point in System Properties System Protection. Receive, "cannot... file already exests...» 0x800700B7. what I'm doing wrong or not done? Be nice... I am a Virgin computer! LOL PS - the laptop is a hand me down and contaminated by _:)

    Do not know what measures allowing you to create restore point.

    Here is the step by step:

    Start button > in the search box, type backup and Restore Center > press the Enter key > left column > click on create a Restore Point or change settings > wait > in the window system properties, put a stop to the OS (c :)) (System) > click the button create near the bottom right > the rest should be self-explanatory.)

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • I get the message "unspecified error" when you try to create a system restore point

    That this is an autofocus of startoff a I have create, fSystem restoration returns with 'unspecified error', he never worked on my laptop.

    Can anyone help? Thks

    Hi somnop,

    1. What antivirus do you use?

    2. do you get any specific error code?

    Follow the steps below and check, if it helps.

    Step 1:

    Disable all security software and check if the problem persists.

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
     
    Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Step 2:

    Do SFC scan and check if the problem is related to corruption in the file system.

    Step 3:

    I know that you cannot create a restore but point as a test, try to do System Restore in safe mode and check if you are able to restore.

    Note: Restart the computer in normal mode after the test.

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • When you try to create a system image on an external hard drive, I have an I/O error ox8078002A.

    I use an HP Pavilion dv7 notebook PC and a 3 TB of Seagate external hard drive USB 3.0.  Operating system is Windows7 64 bit.  Support Microsoft suggests running chkdsk /R on the Seagate drive and I am currently doing this (time consuming).  Another post suggested trying another USB port, but producing the same result.  Any other suggestions?  Thank you.

    I consulted the Seagate Support site and learned that the backup drive Seagate Plus will back up only data, not file system.  He is going back to the store.  Thanks to those who tried to help him.

  • Failed to create the system repair disc receiving error code 0 x 80070057

    Original title: System repair

    When I try to create a system repair disc it gives me a message "the parameter is incorrect (0 x 80070057) '. In the same area every time I try to make a back-up, I get a message telling me the back-up was done, but without some missing files?

    No help available?

    Ray

    Hello Ray,

    Thank you for your response.

    I appreciate your time and your efforts.

    Please refer to the suggestions of Sharkbyter replied on 18 May 2011 and check the issue.
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/unable-to-create-a-system-repair-disc-0x80070057/66b208a9-CD48-447C-98C3-e59f3553c842

    Note: The use of third-party software and links, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software and links can be resolved. The use of links and third-party software is at your own risk.

    I hope this helps.

    Thank you

  • When you try to run a system recovery I get this error: cannot start Windows. A recent hardware or software change might be the cause. OxcOOOOOOf

    When you try to run a system recovery I get this error; OxcOOOOOOf

    Original title: error OxcOOOOOOf

    My laptop crashed. I used my initial recovery to start. I get a message from Windows Boot Manager as follows:

    Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

    1. Insert Windows installation disc and restart your computer.
    2. choose your language settings, and then click "next".
    3. click on "Repair your computer."

    If you do not have this disc, contact you system administrator or computer manufacturer for assistance.

    File: \Windows\system32\winload.exe

    Status: OxcOOOOOOf

    Info: Seelected entry could not be loaded because the application is missing or damaged.

    It does not work. Suggestions and no, I have not modified before the crash.

    I loaded my recovery disk for my 32-bit home edition of vista Hp pavilion dv6700 cto entertainment lapt top and after going through the recovery process I just get this mechioned of the screen in the original question. How ever during my recovery process never got far enough to enter my product code, he asked just a two disc and disc supplamentry and then gave me a blue screen black for a minute or two then rebooted and showed the failure of start OxcOOOOOOf screen... what should I do?

    Hi Anthony206,

    Since you've already tried to use the Windows Vista recovery disc has received from the Original Equipment Manufacturer (OEM).

    From now on, you can only contact OEM for the use of the recovery feature.

    I hope this helps.

  • I run pc photoshop CS6 on my windows 7 (mac). I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in my SP6 or 64 PS5.5

    Greetings


    I run Photoshop CS6 on my windows 7 Ultimate (MacPro 2008 via Bootcamp). 12 GB of ram, 512 on the video card. A lot of disk space. None of the questions of knowledge, viruses, malware, etc.


    I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in any of my SP6 or PS5.5 64-bit or 32-bit versions. «Cold is not complete the plug of command because Photoshop was unable to locate the plugin JavaScript» Re, I installed the latest update, but no change. My installation is built on CS4 extended, then with a version Standard 5, 5.5 and 6 facilities upgrade.


    The Contact Sheet function was working well, until I ran the updates.


    I'm in a bad place, as I am in the middle of multiple projects, everything I need to create Contacts for.  I thank any help or give advice on how to fix this...


    Help, please!

    Try to run Photoshop with the SHIFT key is pressed and skip loading part tird plug-in and try to use the Board contact II.  A version of plug-ins from third parties have been known to break Photoshop Scrippting.

  • Satellite U205-S5034 - error when you try to create the recovery disks

    Hello world

    I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
    An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

    The machine is a Satellite U205-S5034 under XP Pro SP3.

    Any help will be greatly appreciated. Thank you and have a nice day.

    DaveMatt44

    Hello

    What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
    So please try other discs.

    Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

  • Version of Photoshop elements Windows 14 - error when you try to create a Photomerge Panorama "documents must be registered before they can be merged. I tried a few of the fixes mentioned in these forums such as Edit-> Preferences-> general-> res

    We know the fix for the bug "documents must be registered before they can be merged" when you try to create a Photomerge Panorama in PSE 14?

    I think I have found workarounds to the question "documents must be registered before they can be merged" (no thank you lack of Adobe customer support):

    Solution #1

    My workflow template is to take pictures with my SLR and save on the memory in the form of RAW files, download the images on my PC, then open the RAW files in Adobe Camera Raw and then save the images to jpeg using PSE. I wasn't able to create Photomerge Panorama with jpeg images I've saved, but I was able to create Photomerge Panorama with the images I have saved IF I save as TIFF 8-bit files in EPS. A condition for this workaround was that I had to save the pictures at their original resolution and not at a reduced resolution.

    Solution #2

    If I have a right-click on an image and selected open with 14 and observed PES Editor (RGB/8) * to the right of the file changes its name, which means PSE think he has not saved to the file. The solution is to go to file-> Save-> Save (replace existing file-Yes)-> OK. You can then use this file and others you perform the same steps to create a Photomerge Panorama.

    Solution #3

    The way to save JPEG files in PSE is to go to file-> save for Web-> Save-> Save. The workaround is to select the file-> save for the Web and then check the box include the color profile , then click on save and then save again. Then I'm able to merge JPEG files using Photomerge Panorama and I don't get the error message "Documents must be registered before they can be merged". I looked back 11 of PSE that is still on my PC and found that the Embed checkbox color profile did NOT have to be checked to get Photomerge to work for jpeg files. So it appears with PSE 14 Adobe changed the Photomerge Panorama script to require the image file the color profile embedded in the image. If the color profile is not embedded, PSE think the image file has unsaved changes. BTW, this bug, or "feature" has not changed with PSE 14.1.

  • Error when you try to create the Contact form PSE13

    I get two error messages when you try to create a contact sheet

    "The operation could not be completed. The file or directory is not found. »

    then

    "Could not complete the command II Board contact because of a program error"

    I'm on iMac OSX Yosemite 10.10.2

    Updated for PSE12 when PSE13 is released

    No problems with PSE12

    If you go to

    (user) Library\Preferences\Adobe\Plugins\Adobe Board Contact II PSE12\Elements

    and remove the

    Adobe Board Contact PSE12 Pref.


    If all goes well, you should be able to use the plugin Contact Sheet II again.

    To view your library, the user in the menu go to the Finder press the Option key, then you should see library listed in the menu to reach.

  • Access is denied problem on command prompt when you try to overwrite a file in the system32 folder.

    Access is denied problem on command prompt when you try to overwrite a file in the system32 folder. I gave the control of user accounts affecting for never notify his still does not. I am running Win 7 Home Basic 64-Bit please help me get out of here

    You have two options:

    • Perform the action under high administrator privileges.
    • Turn off UAC (not recommended).
    Why would you want to give users the right to modify files in the System32 folder? Sounds like a recipe for disaster.
  • I bought Illustrator for a month, but when you try to run the application, it asks me to 'renew subscription '. I have tried reloading illustrator twice and reloaded CreativeCloud but it still does not work. What else can I try? I immediately need to HAVE

    I bought Illustrator for a month, but when you try to run the application, it asks me to 'renew subscription '. I have tried reloading illustrator twice and reloaded CreativeCloud but it still does not work. What else can I try? I need immediately GOT to work

    Log, activation, or connection errors. CS5.5 and later versions

    Mylenium

  • Format my laptop without installation disc, the system repair disc or the system image.

    I'm 15 and I need to clean my laptop HP Compaq because it's painfully slow; I have no disk Windows installation, without additional disks except the system (C :) and recovery (r :)) and I cannot create a system repair disc OR a system image.)) I lose my sanity in this laborious process, please help me!

    Have you ever run the Norton removal or the McAfee Consumer products removal tool?

    Did you know you can use the hidden restore partition to do a clean install of Windows? CF. http://support.hp.com/us-en/document/c01867418

Maybe you are looking for

  • Very Fragile screen?

    I've had my Razr Maxx for 28 days. Yesterday morning, I woke up to find it on my bedside table where I left it, but he had 3 cracks inside. He was not charging, it was so that he got hot and the battery expanded and broke it. It does not fall, it was

  • Unable to print PDFs with HP deskjet 2050 printer

    Original title: device hp 2050 Office jet Can't print pdf

  • Windows XP SP1 back to factory settings - unable to download SP3. any suggestions?

    I just got back my computer to factory settings.  The operating system is Windows XP Home Edition with Service pack 1 installed.  I need to download and install Service Pack 3.  Can someone tell how can I do this?  Microsoft advises me to use automat

  • DVD error Code 19___

    My CD/DVD-RW - Optiarc DVD RW AD - 75308B ATA Device does not work, it starts, runs and then stops on the Device Manager I get the following message Windows cannot start this hardware device because its information of configuration (in the registry)

  • Windows Live Mail 2011 - part lost

    I lost my "task pane"... in the lower right corner of my screen just above of the time that inter is with the server and gives me the opinion that I am connecting to the server and receive e-mail when I open my desktop icon. It also shows the mistake