Similar Questions

• Get "communication error with kernel" message when you try to run a virus scan program

  Get "communication error with kernel" message when you try to run a virus scan program

  Hello

  What antivirus do you use?

  Follow the steps in the article mentioned below and check if this solves the problem.

  
  The error message "error communicating with kernel":
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN2280

• During the installation of the first items I get an error with Shared Technologies

  When installing Premiere Elements on a Windows XP Service Pak 3, I get an error with shared Technologies.

  Hello

  Thanks for the reply.

  I had to bridge opened in the background, and once I closed this properly installed items.

  Thank you.

• I get this error with my login form, I did, but I'm not sure if this is a problem with my php code or

  I get this error with my login form when I try to log in, but I'm not sure if this is a problem with my php code or my flex code!
  
  ReferenceError: Error #1069: loginsuccess property not found on string and there is no default value.
  CBC::main/checkLogin()
  CBC::main/__login_user_result()
  to flash. events::EventDispatcher / dispatchEv...
  to flash. events::EventDispatcher / dispatchEv...
  to HTTPOperation / http://www.Adobe.com/2006/Flex/MX/internal:dispatchRpcEvent ()
  to mx.rpc::AbstractInvoker / http://www.Adobe.com/2006/Flex/MX/internal:resultHandler ()
  at mx.rpc::Responder/result()
  at mx.rpc::AsyncRequest/acknowledge()
  to the DirectHTTPMessageResponder/completeHandl...
  to flash. events::EventDispatcher / dispatchEv...
  to flash. events::EventDispatcher / dispatchEv...
  at flash.net::URLLoader/onComplete()
  
  
  my php code is:
  
  [php] <? PHP
  
  define ("DATABASE_SERVER", "localhost");
  
  define ('DATABASE_USERNAME","f4r");
  
  define ('DATABASE_PASSWORD', 'cool23');
  
  define ('database_name', 'bignixs1');
  
  connect to the database
  
  $mysql = mysql_connect (DATABASE_SERVER, DATABASE_USERNAME, DATABASE_PASSWORD) or die (mysql_error ());
  
  Select the database
  
  @mysql_select_db (DATABASE_NAME);
  
  re-branded the data passed from Flex to variables
  
  $username = mysql_real_escape_string ($_POST ["usernam...)
  
  $password = mysql_real_escape_string ($_POST ["passwor...)
  
  Ask the database to see if the combination of username/password given name is valid.
  
  $query = "SELECT * from users WHERE username = 'username' AND password = 'password" ";
  
  $result = mysql_fetch_array (mysql_query ($query));
  
  start generating XML
  
  $output = "< loginsuccess > ';
  
  If the query returned true, exit < loginsuccess > Yes < / loginsuccess > other output < loginsuccess > not < / loginsuccess >
  
  if(!$result)
  
  {
  
  $output. = « no » ;
  
  } else {}
  
  $output. = "yes";
  
  }
  
  $output. = "< / loginsuccess > ';
  
  all the XML for output
  
  print ($output);
  
  ? > [/php]

  $query = "SELECT * from users WHERE username = 'username' AND password = 'password" ";

  should be

  $query = "SELECT * FROM users WHERE username = '$username' AND password =  '$password'";
  

  example of a system of working with the correct connection code flex & php to ensure:

  http://www.mattlefevre.com/viewExample.php?tut=flexPHP&proj=simple%20Login%20Application

• I get an error with as3!

  What I am doing wrong? I need to make a game for the class and I get this error please help thanks!

  Scene 1, Layer 'Actions', frame 1, line 15

  1119: access of property may be undefined KeyCode through a reference with static type flash.events:KeyboardEvent.

  Here is the code:

  var upPressed:Boolean = false;

  var downPressed:Boolean = false;

  var leftPressed:Boolean = false;

  var rightPressed:Boolean = false;

  var speedX:int = 10;

  Quick var: int = 10;

  player.addEventListener (Event.ENTER_FRAME, MoveinDirection);

  stage.addEventListener (KeyboardEvent.KEY_DOWN, KeyPressed);

  stage.addEventListener (KeyboardEvent.KEY_UP, KeyReleased);

  addEventListener (Event.ENTER_FRAME, loop);

  function KeyPressed(event:KeyboardEvent):void

  {

  switch (event. KeyCode)

  {

  case Keyboard.UP:

  {

  upPressed = true;

  break;

  }

  case Keyboard.DOWN:

  {

  downPressed = true;

  break;

  }

  case Keyboard.LEFT:

  {

  rightPressed = true;

  break;

  }

  case Keyboard.RIGHT:

  {

  rightPressed = true;

  break;

  }

  }

  }

  function KeyReleased(event:KeyboardEvent):void

  {

  switch (event. KeyCode)

  {

  case Keyboard.UP:

  {

  upPressed = false;

  break;

  }

  case Keyboard.DOWN:

  {

  downPressed = false;

  break;

  }

  case Keyboard.LEFT:

  {

  rightPressed = false;

  break;

  }

  case Keyboard.RIGHT:

  {

  rightPressed = false;

  break;

  }

  }

  }

  function MoveinDirection(event:Event)

  {

  If (upPressed)

  {

  }

  If (downPressed)

  {

  }

  If (leftPressed)

  {

  Player.x = speedX;

  }

  If (rightPressed)

  {

  Player.x += speedX.

  }

  }

  function loop(e:Event)

  {

  Player.y += 1;

  Player.y += fast;

  }

  ActionScript is case-sensitive and KeyCode is not the same thing as keyCode.  That is to say, use:

  {Switch (Event.keycode)}

• Why do I get ' year error occurred while signing in "in ExportPDF?

  I use PDF export.  I'm trying to convert a PDF file to Excel and get this... "year error occurred while signing in" "Try again" "Cancel".

  Hi yakr,

  You try to connect via Adobe Reader? If so, you choose Help > check for updates and make sure that you use the latest version (11.0.09). Earlier versions of the player may cause the error you describe.

  Please let us know how it goes.

  Best,

  Sara

• I get this error "sec_error_ocsp_bad_http_response" on several sites with FF 6.0.2 and prior versions, but do not get the error with IE.

  I get this error on several sites, it's the latest on what he has just come. I got it by trying to sign on this page.
  I am able to connect using IE 9, Windows 7 Enterprise.

  What is the definition of OCSP?

  • Tools > Options > advanced > encryption: Certificates > Validation

• Getting 7 error with the HTTP POST vi method when deplyed ISO crio as executable... urgent!

  Hi all

  I have an application where I can access the net server point of LabVIEW via the HTTP protocol to send the data. My application works fine when I run it on XP, and also sometimes on cRIO. I'm writing and reading files to store and read data from the server.

  When I do my application executable and deployed on cRIO I am constantly 7 error that says "Error in the node library function to call at the POST vi LabVIEWHTTPCLIENT".

  After getting this error if I try to run the my new project the crio (not through exe) I keep getting the same error. This means once the executable file is deployed on the crio, I get the error in my project application which was working fine before you deploy the executable file.

  7 occurs very frequently. and I am unable to find the reason. I gave all the paths in the constant form located on crio and files accessible also when the application is run.

  Is someone can you please help me what this error 7?

  as a result, that it is bound to the HTTP POST vi method...

  How can it be fix?

  Its quite urgent...

  Thanks in advance.

  Solution is provided by the NOR... Vi POST method missing two files that need to be there in the startup of the CRIO.insted folder there is in the system folder. That's why when running the exe that the startup on crio application it gives error as the files are not there. The fix for this HTTP POST vi update isn't out yet EITHER.

• I get an error with the same identification number: 6398

  The event log shows:

  Event type: error
  Event source: Windows SharePoint Services 3
  Event category: Timer
  Event ID: 6398
  Date: 08/02/2007
  Time: 13:20
  User: n/a
  Computer: CPSC
  Description:
  The Execute method of the definition of work Microsoft.SharePoint.Search.Administration.SPSearchJobDefinition (ID 3a4cd737-d0c1-443b-be03-75a0f99160bb) threw an exception. More information is included below.

  Recovery of the class factory COM for component with CLSID {629DA12E-9AD5-4FEC-B886-42C5982C5109} failed due to the following error: 8007042d.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  I looked for answers on this subject and I still don't know what to do. If anyone has an answer, I would be happy! It seems to bring a few mistakes more with it as: Event ID 41734, 3355, 7888.

  Hi disease,

  You can check the link below:

  http://social.technet.Microsoft.com/forums/en-us/sharepointgeneral/thread/dc1db06b-AC78-4547-B28D-a0d1efab3b80/

• Get an error with a update

  I have problems with the update for Windows Vista for x 64-based systems (KB2443685).  I have made several attempts to download this update without success.  I also tried to download the analysis tool, but it wouldn't work again!  Can you please help me?  In addition, during my attempts in this download now it seems that my computer works sub par compared to how it normally works.

  http://support.Microsoft.com/kb/555375 >

  It helps those answering questions if you provide:

  service pack level.

  you use what browser (exact version).

  what application anti-virus or security suite is installed and your current subscription?

  What third-party firewall

  What anti-malware software can be installed.

  What updates you trying to install? (Number of KB)

  What error do you get everything when trying to install updates?

  See

  http://support.Microsoft.com/kb/2443685#top

  Update for Windows Vista for x 64-based systems (KB2443685)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=25285c44-C905-42d6-b617-95a6ddb99fa3&displaylang=en

• New to Java development. Get an error with the Hello World program. Help, please

  Hello everyone. I just started with Java and I would begin to develop applications for Blackberry. I'm trying the HelloWorld application, I found in the book of Apress beginning Blackberry development. Yesterday, I installed:

  (1) jdk-1_5_0_22-windows-i586 - p.exe (32 bit)

  (2) BlackBerry_JDE_5.0.0.exe

  I have everything installed in the default location, what he said and this is the error I get when I try to launch my app:

  Building HelloWorld
  C:\Program Files (x 86) \Research In Motion\BlackBerry JDE quiet 5.0.0\bin\rapc.exe-codename = HelloWorld HelloWorld.rapc warnkey = 0 x 52424200; 0 x 52525400; ' 0 x 52435200 import ="... \Program files (x 86) \Research in Motion\BlackBerry JDE 5.0.0\lib\net_rim_api.jar" C:\BeginningBlackBerryDevelopment\com\beginningblackberry\helloworld\HelloWorldApp.java C:\BeginningBlackBerryDevelopment\com\beginningblackberry\helloworld\HelloWorldMainScreen.java
  I/o Error: CreateProcess: javac - 1.3 source-target 1.3 - g - O-d C:\Users\ADAMSK~1\AppData\Local\Temp\rapc_3d5cd53a.dir - bootclasspath "... \Program files (x 86) \Research in Motion\BlackBerry JDE 5.0.0\lib\net_rim_api.jar"-classpath "...» "Error in \Program files (x 86) \Research In Motion\BlackBerry JDE 5.0.0\lib\net_rim_api.jar" C:\BeginningBlackBerryDevelopment\com\beginningblackberry\helloworld\HelloWorldApp.java C:\BeginningBlackBerryDevelopment\com\beginningblackberry\helloworld\HelloWorldMainScreen.java = 2
  Error while building project

  I don't know why. Can someone help me please? I'm running Windows 7 Ultimate x 64.

  Thank you

  No, you set your ACCESS Windows path variable to include the location where the java compiler is installed, usually the directory "/ bin" where you installed java.

  Mine is located here:

  C:\Program Files\Java\jdk1.6.0_05\bin

  Update the path:

  Control Panel

  System

  Advanced tab

  Click the "Environment Variables" button

  Under "System Variables", look for the path and to update.

• I get an error with an error code 124 blue sreen.

  Original title: blue screen of death help

  I get the dreaded BSOD and I was wondering if anyone had any ideas what's happening?  This is a new installation on a new computer, Lenovo.

  I loaded my files of information system and dmp... http://sdrv.Ms/YjFbBk Can someone take a look?
  Thanks in advance

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: 124

  BCP1: 0000000000000000

  BCP2: FFFFFA80065AF028

  BCP3: 00000000F6002000

  BCP4: 000000001D 000136

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\012113-12495-01.dmp

  C:\Users\Heath Stake\AppData\Local\Temp\WER-35599-0.sysdata.xml

  Read our privacy statement online:

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\System32\en-US\erofflps.txt
  Stop 0 x 124 is a hardware error
  If you are overclocking try to reset your settings to standard processor and see if that helps.
  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:

  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.

  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).

  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.

  (4) update the BIOS of your motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.

  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.

  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use diagnostics from built-in memory (run MDSCHED) or the utility memtest86 3rd - party to run plenty of evidence of hours of testing.
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".

  
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:

  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.

  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• vSphere PowerCLI w / vi toolkit extensions '74794', Get-TkeSnapshotExtended errors with Add-Member SizeMB already exists

  I'm trying to generate a report of all snapshots in the ESX environment.

  (1) installed PowerShell 2.0 for Windows XP

  (2) installed VMware PowerCLI 4.0 U1

  (3) installed VMware VI Toolkit for Windows 1.5

  (4) added PSSnapin VMware.VimAutomation.Core

  (5) any module viToolkitExtensions.psm1 version 74794

  (6) found recommended community command of the ' Get - VM | Get-TkeSnapshotExtended | Select Name, VM, SizeMB '.

  It does not work! However powershell returns the following error between each instant result:

  Member add: unable to add a member with the name "SizeMB" because a member with the same name already exists. If you want

  replace the Member anyway, use the Force parameter to overwrite.

  C:\WINDOWS\system32\WindowsPowerShell\v1.0\Modules\viToolkitExtensions\viToolkitExtensions.psm1:2453 tank: 20

  +                 $s | Add-Member < < < < - type noteproperty - name "SizeMB" - value ($totalSize / 1 mb)

  + CategoryInfo: InvalidOperation: (% 2f14% 2f2010 o7: PSObject) , InvalidOperationException

  + FullyQualifiedErrorId: MemberAlreadyExists, Microsoft.PowerShell.Commands.AddMemberCommand

  Does anyone know what causes this or how to fix?

  The problem you see is that the object returned by

  Get-VM  | Get-Snapshot
  

  already contains a property named SizeMB in PowerCLI 4u1.

  The simplest solution is to comment out this line in the file viToolkitExtensions.psm1, like this

  # Add this to the input object and pass it through.
  # $s | add-member -type noteproperty -name "SizeMB" -value ($totalSize / 1mb)
  $s
  

  But in fact the Extensions community complete need for a review.

  With PowerCLI 4.1 module does not at all since all object types have been modified.

  BTW, there is no need to install VI Toolkit 1.5 and PowerCLI 4.0u1. The two are different versions of the same product.

  The confusion probably comes from the name change that occurred when PowerCLI 4.0 was released.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Weird error with two classes that surrounds picking paths (oraclebook)

  Hi guys! I come here once more to ask for help, please!
  
  As you may know, im currently studying this book of the oracle, but my two classes that take the paths give me some errors.
  Can anyone have a look for me? I has not changed the codes at all!
  

  package CapituloII;
  
  /**
   *
   * 
   */
  
  import java.io.File;
  import java.util.ArrayList;
  import java.util.List;
  import javafx.application.Application;
  import javafx.event.EventHandler;
  import javafx.scene.Group;
  import javafx.scene.Scene;
  import javafx.scene.image.Image;
  import javafx.scene.image.ImageView;
  import javafx.scene.input.DragEvent;
  import javafx.scene.input.Dragboard;
  import javafx.scene.input.MouseEvent;
  import javafx.scene.input.TransferMode;
  import javafx.scene.layout.HBox;
  import javafx.scene.paint.Color;
  import javafx.scene.shape.Arc;
  import javafx.scene.shape.ArcBuilder;
  import javafx.scene.shape.ArcType;
  import javafx.scene.shape.Rectangle;
  import javafx.scene.shape.RectangleBuilder;
  import javafx.stage.Stage;
  
  /**
   * Creating Images
   * @author cdea
   */
  public class Pagina70 extends Application {
      private List<String> imageFiles = new ArrayList<>();
      private int currentIndex = -1;
      public enum ButtonMove {NEXT, PREV};
  
      /**
       * @param args the command line arguments
       */
      public static void main(String[] args) {
          Application.launch(args);
      }
  
      @Override
      public void start(Stage primaryStage) {
          primaryStage.setTitle("Chapter 2-1 Creating a Image");
          Group root = new Group();
          Scene scene = new Scene(root, 551, 400, Color.BLACK);
          
          
          // image view
          final ImageView currentImageView = new ImageView();
          
          // maintain aspect ratio
          currentImageView.setPreserveRatio(true);
          
          // resize based on the scene
          currentImageView.fitWidthProperty().bind(scene.widthProperty());
          
          final HBox pictureRegion = new HBox();
          pictureRegion.getChildren().add(currentImageView);
          root.getChildren().add(pictureRegion);
          
          // Dragging over surface
          scene.setOnDragOver(new EventHandler<DragEvent>() {
              @Override
              public void handle(DragEvent event) {
                  Dragboard db = event.getDragboard();
                  if (db.hasFiles()) {
                      event.acceptTransferModes(TransferMode.COPY);
                  } else {
                      event.consume();
                  }
              }
          });
          
          // Dropping over surface
          scene.setOnDragDropped(new EventHandler<DragEvent>() {
  
              @Override
              public void handle(DragEvent event) {
                  Dragboard db = event.getDragboard();
                  boolean success = false;
                  if (db.hasFiles()) {
                      success = true;
                      String filePath = null;
                      for (File file:db.getFiles()) {
                          filePath = file.getAbsolutePath();
                          currentIndex +=1;
                          imageFiles.add(currentIndex, filePath);
                      }
                      
                      // set new image as the image to show.
                      Image imageimage = new Image(filePath);
                      currentImageView.setImage(imageimage);
                          
                  }
                  event.setDropCompleted(success);
                  event.consume();
              }
          });
  
          
          // create slide controls
          Group buttonGroup = new Group();
          
          // rounded rect
          Rectangle buttonArea = RectangleBuilder.create()
                  .arcWidth(15)
                  .arcHeight(20)
                  .fill(new Color(0, 0, 0, .55))
                  .x(0)
                  .y(0)
                  .width(60)
                  .height(30)
                  .stroke(Color.rgb(255, 255, 255, .70))
                  .build();
          
          buttonGroup.getChildren().add(buttonArea);
          // left control
          Arc leftButton = ArcBuilder.create()
                  .type(ArcType.ROUND)
                  .centerX(12)
                  .centerY(16)
                  .radiusX(15)
                  .radiusY(15)
                  .startAngle(-30)
                  .length(60)
                  .fill(new Color(1,1,1, .90))
                  .build();
          
          leftButton.addEventHandler(MouseEvent.MOUSE_PRESSED, new EventHandler<MouseEvent>() {
              public void handle(MouseEvent me) {                
                  int indx = gotoImageIndex(ButtonMove.PREV);
                  if (indx > -1) {
                      String namePict = imageFiles.get(indx);
                      final Image image = new Image(new File(namePict).getAbsolutePath());
                      currentImageView.setImage(image);
                  }
              }
          });
          buttonGroup.getChildren().add(leftButton);
          
          // right control
          Arc rightButton = ArcBuilder.create()
                  .type(ArcType.ROUND)
                  .centerX(12)
                  .centerY(16)
                  .radiusX(15)
                  .radiusY(15)
                  .startAngle(180-30)
                  .length(60)
                  .fill(new Color(1,1,1, .90))
                  .translateX(40)
                  .build();
          buttonGroup.getChildren().add(rightButton);
          
          rightButton.addEventHandler(MouseEvent.MOUSE_PRESSED, new EventHandler<MouseEvent>() {
              public void handle(MouseEvent me) {                
                  int indx = gotoImageIndex(ButtonMove.NEXT);
                  if (indx > -1) {
                      String namePict = imageFiles.get(indx);
                      final Image image = new Image(new File(namePict).getAbsolutePath());
                      currentImageView.setImage(image);
                  }
              }
          });
          
          // move button group when scene is resized
          buttonGroup.translateXProperty().bind(scene.widthProperty().subtract(buttonArea.getWidth() + 6));
          buttonGroup.translateYProperty().bind(scene.heightProperty().subtract(buttonArea.getHeight() + 6));
          root.getChildren().add(buttonGroup);
          
          primaryStage.setScene(scene);
          primaryStage.show();
      }
      
      /**
       * Returns the next index in the list of files to go to next.
       * 
       * @param direction PREV and NEXT to move backward or forward in the list of 
       * pictures.
       * @return int the index to the previous or next picture to be shown.
       */
      public int gotoImageIndex(ButtonMove direction) {
          int size = imageFiles.size();
          if (size == 0) {
              currentIndex = -1;
          } else if (direction == ButtonMove.NEXT && size > 1 && currentIndex < size - 1) {
              currentIndex += 1;
          } else if (direction == ButtonMove.PREV && size > 1 && currentIndex > 0) {
              currentIndex -= 1;
          }
  
          return currentIndex;
      }
      
  }

  Error generated when I drag-and - drop:
  
  ATTENTION: It won't let me copy the first two lines and the last two lines of the error:
  
  >
  
  
  
  
  java.lang.IllegalArgumentException: Invalid URL: unknown protocol: c
  at javafx.scene.image.Image.validateUrl (unknown Source)
  to javafx.scene.image.Image. < init >(Unknown Source)
  to CapituloII.Pagina70$ 2.handle(Pagina70.java:96)
  to CapituloII.Pagina70$ 2.handle(Pagina70.java:80)
  at com.sun.javafx.event.CompositeEventHandler.dispatchBubblingEvent (unknown Source)
  at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent (unknown Source)
  at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent (unknown Source)
  at com.sun.javafx.event.CompositeEventDispatcher.dispatchBubblingEvent (unknown Source)
  at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent (unknown Source)
  at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent (unknown Source)
  at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent (unknown Source)
  at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent (unknown Source)
  at com.sun.javafx.event.EventUtil.fireEventImpl (unknown Source)
  at com.sun.javafx.event.EventUtil.fireEvent (unknown Source)
  at javafx.event.Event.fireEvent (unknown Source)
  to javafx.scene.Scene$ DnDGesture.fireEvent (unknown Source)
  to javafx.scene.Scene$ DnDGesture.processTargetDrop (unknown Source)
  to javafx.scene.Scene$ DnDGesture.access$ 6500 (unknown Source)
  to javafx.scene.Scene$ DropTargetListener.drop (unknown Source)
  at com.sun.javafx.tk.quantum.GlassSceneDnDEventHandler.handleDragDrop (unknown Source)
  at com.sun.javafx.tk.quantum.GlassViewEventHandler.handleDragDrop (unknown Source)
  at com.sun.glass.ui.View.handleDragDrop (unknown Source)
  at com.sun.glass.ui.View.notifyDragDrop (unknown Source)
  at com.sun.glass.ui.win.WinApplication._runLoop (Native Method)
  in com.sun.glass.ui.win.WinApplication.access$ 100 (unknown Source)
  to com.sun.glass.ui.win.WinApplication$ $2 1.run (unknown Source)
  at java.lang.Thread.run(Thread.java:722)
  Caused by: java.net.MalformedURLException: unknown protocol: c
  at java.net.URL. < init > (URL.java:590)
  at java.net.URL. < init > (URL.java:480)
  at java.net.URL. < init > (URL.java:429)
  ... more than 27
  Exception in thread 'Thread of Application JavaFX' E
  

  Hello

  I think that the string you give to the new Image (string) must be a URL, not a single file path.

  So if you have a file, it would be something like:

  File file = ...;
  Image image = new Image(file.toURI().toURL().toExternalForm());
  

  Hope this helps,

  -daniel

• Get an error with the EventGateway in Mac OS x 10.8

  Two machines, both fresh installs ColdFusion.  Set up an Instance of gateway named cfflexgw.  Point to a CFC to work and the local cfg file.  When I send a simple message to the gateway, I get the following error:

  Cannot find the adapter Flex to destination ColdFusionGateway in the RMI registry on localhost:1099.

  MultiServer 9.0.2.  With the help of the cfusion instance basis and I do alter not all xml config files again.  This code worked on version 9.0.1 (and still works) in OSX 10.7.  I also tried a dismantled SWC and message.  You can provide any help is appreciated!  Remote access works well BTW, simply do not send message to CF via the ColdFusionGateway.

  Thank you

  NIC

  I was able to solve this problem.  I wrote a blog post, so I hope that someone else's time records.  I still have no idea why this setting needs to be changed, so maybe a CF engineer can explain it my future studies.

  http://blog.nictunney.com/2012/12/BlazeDS-error-solved.html