GetValueList, alternative problem?

Similar Questions

• X 220: driver technology Intel Rapid Storage Technology

  "evening.

  continuing my experience so far-so good with a crucial mSATA ssd in my x 220:

  http://forums.Lenovo.com/T5/X-series-ThinkPad-Laptops/mSATA-SSD-for-my-beloved-X220/m-p/816771#M3993...

  I work through all the windows and the driver updates and system update offers me an update the driver of the TSRI. the x 220 factory image installs v10.1.0.1008 while su is the list v11.2.0.1006 dated June 2012. I'm pretty happy with the SDS and the disk performance hard the system at the present time, especially the ssd and don't want to spoil things.

  the Readme is rather vague about the update:

  [New features or enhancements]
  -Device driver functionality improvement.

  If a couple of the versions betwwen my current and the most recent to be useful look.

  then... someone installed the latest version? and... have you seen improvements or, Alternatively, problems?

  Thanks in advance.

  Hello

  As they say, that's a good question!  I don't know what version is on it, so let me check...

  It is v11.2.0.1006, date dated 30/05/2012.  I didn't notice any problems with it since that it has been installed (mid-July).

  Kind regards

  Aryeh Goretsky

• Install Win XP 64-bit on Dell Dimension 8400

  Hi all

  I want to install Windows XP Professional 64-bit on Dell Dimension 8400 (64 bit PC). But I don't know what "SATA Operation" mode to choose. However, when I tried with "RAID Autodetect / AHCI", "RAID Autodetect / ATA ' or 'RAID ON', I could not install because there was an error message saying that the hard drive not found: (.) But I know that the hard drive works fine. I note that there is another option "combination".

  1. can you please anyone suggest me the correct installation with the correct Sata Mode? Please note that I basically need to install Windows XP Professional 64-bit only, and I don't have a floppy as well.

  2. in addition, I don't have a company CD for drivers or operating system. I can upload them in the DELL site with serial number of the PC. But I noticed that there are many readers for the same category, for example: 12 drivers for the video. How to select the corresponding drivers exactly between all for this particular PC?

  Although I noticed similar/alternative problems addressed in this forum, but I could not find an adequate solution to these answers.

  Thank you!!!

  Frey

  Since the drive was part of the front table, it can automatically start (should be able to confirm to CTRL-I), but if not, then you need to start manually (made in CTRL-I, or even the operating system management utility).

  You can also get another cable... they are usually no more than $2-3 to any computer parts store.

• I have a macbook pro 10.11.2, I would use netbeans/eclipse/oracle/mysql, which I can't... so is an alternative to my problem or advice on what he should do.

  I have a macbook pro(10.11.2/2.7GHz/8GB(RAM)/256GB), I would use netbeans/eclipse/oracle/mysql, which I can't... so is an alternative to my problem or advice on what he should do.

  I installed netbeans three times, but everytime I open the app I can't find the java section that comes with the installation package.

  You should consult with manufacturers of these applications of tierce partie for help on the installation and execution of their products.

• Satellite A300-202 - problems with alternating current

  Hello

  I bought a Satellite A300-202 a few months ago and I'm having intermittent problems with alternating current.

  Sometimes I plug the AC power and it does not start (the led are off and windows says that it is on battery) charge. Other times, he is in charge and suddenly stops.

  I suspected it might be the cord broken inside, but it seems to happen also when no one touches it. Usually, when it stops to load, I unplug the wall, wait a few seconds and plug in again, and it starts to load correctly never stop again.

  Someone at - it had a similar problem? I wonder if is it possible to just replace the parts to AC power so I won't have to send the laptop for repair.

  Thank you

  Pedro

  Hello

  I've never had a problem with my Toshiba Chargers but an old non - Toshiba power adapter died after 6 months of use. After the replacement, it works without any problem.

  I think you should check the update of the BIOS as mentioned by Akuma, but for me, it looks more like a problem with the AC adapter.
  So if the BIOS update help t doesn't, the adapter should be checked permanently.

• Alternating the problem of Capture DV Mono or stereo

  I'm captures old video tapes digital (not analog bands although it happened there also) in v.2015.4 Premier Pro. From a single band that I captured several segments. The video is very good, in all but one of the only audio capture happens on a single 16-bit stereo channel as it should, but in the first capture of the Ribbon comes on 4 different channels 16-bit - Mono 4. Channels 1 and 2 are probably L & R tracks although I see no difference in the waveforms. Chanel 3 and 4 are empty. The original recording is in stereo. It is a bit of a pain because two audio tracks need to be adjusted independently and not as a single setting performing simultaneously the two L & R. I can miss some audio information too. Is there a way to set capture and audio settings always comes as a simple stereo channels, I can't find.  Or?

  Help appreciated.

  Greg

  It is a good alternative.  Thank you.

  But I think that I thought about it. I got to thinking a little deeper and more logically. It is only the beginning of a capture of Ribbon and remains so through the balance of this particular shot, no matter how long. In addition, I realized it only happens when I start the initially absolute capture of the band, on the head or the Virgin band HDDR. When I moved the band on a spot just a few images in the recorded video real audio capture although stereo. As I think about it, it makes perfect sense.  There is a signature on the tape for audio, or mono or stereo, as the capture begins. The default value must be mono that it holds in all of the capture.

  Problem solved.

• Pinning and align problem - working with alternative configurations fixed and fluid

  Hello

  As suggested by the staff of Adobe, I'm working with a layout of fixed width for the desktop version, so I can use the scrolling effects in this version and a layout alternative tablet with a fluid design for mobile devices.
  
  In this way, I will have two major problems with the working fluid design version:
  
  -I can't pin objects to fixed locations in the browser. The option is disabled, and I can't create a set menu, for example.
  
  -I can't focus the presentation of the fluid design version, there's always left align. In fact, breakpoint rule changes and stays aligned left also. It is a problem, because when I opened my site in a device with a larger resolution, it remains to the left of the browser.
  
  There is a solution for these problems?

  Hey well thanks for the help, Bernard.

  I tried to work with a fluid layout compressed as an alternative to avoid creating a Tablet and the mobile version of the site. Instead, I would have only the office page and the layout fluid compressed, that would suit regardless of the user's device.

  As for now, I will continue to work with the development of Adaptive with variants of the tree when scroll effects are necessary and work with a sensitive provision in other cases, with more correct is.

• Saves out as IDML for previous versions of InDesign causes alternative layout problems.

  Hi all

  I'm having a problem with alternative presentations used for refunds in InDesign. Currently using InDesign CC for all files, but these need to be saved out as IDML files for translation and to be compatible for CS6 as my CC license is not renewed at the office.

  What happens is that when I open the IDML after saving outside, alternate layouts extend outwards and scale incorrectly. Does anyone have experience or suggestions to work around this problem, other that individually save each file layout? I have 42 items if prefer to keep 3 renderings in a single file.

  Thank you
  Sam

  Ok. I have the culprit of this disaster!

  Just check the rules of the pages for liquid layout.

  For the first page, which have not changed, it was: 'basic '.
  For the other two pages that change, it was: 'Scale '.

  Then I put all the pages of "basic", exported an IDML, opened again in v9.2.1 CC and everything seems fine.

  Uwe

• I have a simple solution to a thorny problem in Pages 5.6.1 creating different headers for pages in book with chapters alternating

  5.6.1 pages

  To create headers for alternating the pages of book with chapters, when to start each new chapter, go to the DOCUMENT - SECTION - CREATE a NEW ARTICLE.

  If you do not want a header to appear on the first page of a new chapter, go to the DOCUMENT - SECTION - and click HIDE on the FIRST PAGE OF the SECTION. You will then need to insert the page manually number on these pages by going to the "T" icon at the top of page to create a box, it runs small, insert internal number and format to match the font in the rest of the document.

  Hi Tales2Inspire,

  Welcome to the Pages for Mac forum and Apple Support communities. Thanks for your Post. It's late at night here, but I'll try your suggestion for a text box in the morning. Please keep posting on the Pages for Mac forum!

  Kind regards

  Ian.

• Alternative to the reset by Satellite A660 for potential HARD drive problem

  In the last week or two, I got a few blue screens, saying he was driving demand, and that windows must be shut down to avoid damage my computer.

  I have just restart and continue working.
  The last time it happened, I had repeatedly "initialization failed" and it says hdd, SDS, fdd. If I pressed the power button until I didn't see no signs of activity, then started. Things went well. I called Toshiba support and they recommended that I go home and save my files before continuing. It took hours selectively to clean, sort the previous backups, and a small footprint of the backup system.

  When I called Toshiba once again, they recommended a "takeover", which is restoring the factory settings. It puts me in the stone age. I have to go through a never-ending process of the upgrade to Windows 7 Pro 64-bit, install and reconfigure all the applications and environments/configurations, etc. It will essentially take on holiday, if not more. I'll also have to get another computer (maybe a netbook) to stay in touch while I restart my laptop. It's barely more than a year.

  Is there a diagnosis I can do to determine the probability that there is a hard drive problem? Support for Toshiba said that is the surest way, because it provides a diagnostic F10 for the hard disk code, and it also pushes the bad sectors at the end of the disc (logically, I suppose, since you can't physically move a fault).

  > About Hitachi DFT, is it important that my HARD drive is Toshiba mk6465gsx? This is what is displayed "Hard drives" in the Device Manager.

  It s no matter what HARD drive manufacturer, it is the Drive Fitness Test is able to scan all hard drives to find errors.

  > Also, http://www.hitachigst.com/support/downloads/#DFTshows links to create boot disks, but I was wondering if I could create a bootable instead.

  Not sure if this is possible if there is that one option to create a startup disk, and then a flash stick does not work. But of course you can try this out.

  > This laptop does not come with a floppy drive, and I still create coasters trying to burn discs.
  You don't need the floppy drive, the tool must create a disk bootable (CD)

  > I guess that the same question can be asked on Memtest86. Another issue is the relevance of Memtest86 for my system. My c drive has a "Program Files" folder, but also a "Program Files (x 86)" folder for 32-bit applications. Memtest86 is for the x 86 architecture. I don't know if my 64-bit Windows 7 involves a non - x 86 architecture.

  I guess that Memtest86 should also work on Win 7 64 bit systems. But also the MemTest 4.20 is 64-bit capable

• Alternative for EXISTS for this problem

  Hello

  create the table test_pa
  (number of emp_id,
  run_date date,
  Number value,
  Run_type varchar (1)
  );

  insert into test_pa values (1, trunc (sysdate), 500,' a);
  insert into test_pa values (1, trunc (sysdate), 400,' a);
  insert into test_pa values (1, trunc (sysdate), 300,' it);

  insert into test_pa values (2, trunc (sysdate), 500,' a);
  insert into test_pa values (2, trunc (sysdate), 400,' a);
  insert into test_pa values (2, trunc (sysdate), 300,' a);

  insert into test_pa values (3, trunc (sysdate), 500,' it);
  insert into test_pa values (3, trunc (sysdate), 400,' it);
  insert into test_pa values (3, trunc (sysdate), 300,' a);

  commit;

  Now, I want to display all the records for these employees on a special day in which the employee had a performance of 'C '. So in this example, I want the release of records for emp id 1 and 2.

  The query I use is

  Select * from test_pa a

  where exists (select 1 from test_pa b where a.emp_id = b.emp_id and a.run_date = b.run_date and b.run_type = "C");

  This works as expected. However, this is a test table and the original table on which I want to apply this million lines. My question is if there is a better alternative EXISTS to improve performance. This query takes a long time to run on the original table.

  Thank you

  Hello

  So, to decide if a line should be included or not, you need to look at other lines.

  An EXISTS subquery is a way: to do.

  Analytical functions, IN questioning him and other ways self-joins.

  Here's how you can use the analytic function MAX:

  WITH got_ok_flag AS

  (

  SELECT emp_id, run_date, value, run_type

  MAX (CASE

  WHEN run_type = 'C '.

  THEN 1

  END

  ) OVER (PARTITION BY emp_id) AS ok_flag

  OF test_pa

  -WHERE... - If you need any filtering, put it here

  )

  SELECT emp_id, run_date, value, run_type

  OF got_ok_flag

  WHERE ok_flag = 1

  ORDER BY emp_id

  ;

  Dependning on what you mean by "on a special day", you need to maybe add a WHERE clause, or change the PARTITION BY clause analytical.

• alternating the problem of overlapping text

  I am new to the adobe family and I'm working on a design for one of my friends and he fell on a look that was missing. The problem is that I can not understand how to get the text that is superimposed on the replacement from front to back and so on and so forth. I was stuck for a few hours now and I searched online for a tutorial can't find one that fits what I'm doing.

  

  No, you must describe the police. With the selected text, choose Type > vectorize

• Why always show that "there is a connection to the Apple store error."? It has been a month I am facing such a problem. How can I fix? Hope you have a solution to this...

  Why always show that "there is a connection to the Apple store error."? It has been a month I am facing such a problem. How can I fix? Hope you have a solution to this...

  I don't know if this is the problem, but it is something that must be correct establish a secure connection:

  Open Date and time preferences system, Date & time tab. Make sure that it is set to automatically set the time.

  Alternatively, make sure that your date/time is correctly set to the second.

  Another thing to try is to restart your modem and router.

• problem with iPhone ios 10.0.1

  The first time that I m facing a problem with updates of ios not able to use the iphone.

  I can't use one of basic such as sms features or whatsapp does not not touch only.

  When you are coming up with the fix or let me know what will be the revert revert back as soon as possible back strategy.

  Kind regards

  Mehul vora

  098207 20061

  Hello. Please you not to Apple here. This is a user forum. All users are waiting for the next update with bugfixes.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Hi people. Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Hello

  You will be able to use the watch in Europe.

  There is no regional differences in the hardware and the software can be configured to your chosen region. The supplied USB power adapter will have to pine trees located in the United States. A travel adapter will allow you to connect it to the European outlets.

  Alternatively, you can buy an Apple USB power adapter that is located in your country of destination / country.

  For example:

  • 2-pole:
    • http://www.Apple.com/FR/shop/product/MD813ZM/A/Adaptateur-secteur-USB-5-w-Apple? FNODE = 83
  • UK 3-pin:
    • http://www.Apple.com/uk/shop/product/MGRL2B/A/Apple-5W-USB-power-adapter-folding - pins? FNODE = 83