GEYED icons in Device Manager

Similar Questions

• M30: After reinstalling XP two yellow icons in Device Manager

  Recently I format my hard drive and reinstalled XP.

  But when I look in Device Manager, there are 2 yellow question icon, we're controller ethernet, second device is unknown.

  Could someone help me. Because I lost all driver records.

  TKS!

  Hello

  Well, on the Toshiba site, you can find all the necessary drivers for this device.

  Please see this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• Yellow triangle with! the wireless network connection in the task bar icon, but ok in Device Manager

  I still need help: 11-24-10' uncorrected problem after all

  I have a laptop of refurbished HP older Pavilion ze5385US who has recently lost the wireless connection.  Now, I have to leave it plugged in to use, not practical at all.  I did the right click on the icon to open the network connections, left clicked wireless network connections and then clicked "repair this connection.  The uninstaslled of the computer, and then was not able to reinstall.  When I checked D, it was empty.  I thought it was where restoration stuff should have been.  So I downloaded and reinstalled much Express IEEE 802.11 PCI card Lan, until I found the one that the computer would be except.  Now, it appears in device very good Manager, but has theyellow cone with! on the icon in the status bar at the bottom.  When I raised it lights, it is said: 13 of (ANY) wireless network connection, speed: 11.0 Mbps, Signal strength: Excellent, status: limited or no connectivity.  When I choose "View available wireless networks", I get "Windows cannot configure this wireless connection.  Under network without wire/support/details of connections, Iget physical address: 00-02-8A-92-BE-0C, IP address: 169.254.196.112 subnet mask: 255.255.0.0, then the default gateway, DNS server, WINS server & have not enumerated values. I'm afraid to hit the repair again, it could wipe out the only map I've found so far that is accepted by my computer.  When I try to enter the knowledge base for WinXP, I get an error for this page, as well as several other help pages I tried the site of microsoft.com for help.  When I used configurationtool thewireless zero in respect of services & restart earlier, I had a red X on my icon, so I guess I've lost my card after all.  Can I disable this?  The map always shows as OK in Device Manager.  Any ideas anyone?  I need help here please.

  Hello

  I thank you and wish you the same.

  I see that your problem has been solved using the HP driver that you mentioned on Thursday, November 18 in your message and the Express.sys is a problem with Windows install.

  I suggest to install the version of Windows install 4.5 on the system from the link below and then update the driver from the link that was attached to your question before and check.

   

  Step 1:

  Install windows install 4.5

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 2:

  Update the driver from the link you mentioned in your previous post.

  I suggest you to check with TP-link if this model is compatible with Windows XP or not.

  http://www.TP-link.com/products/ProductList.asp?class=WLAN#S6

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• The monitor icon is missing in Device Manager

  Monitor-viewsonc vm2235wm; NVID 8600gt video card; 6750 cpu;
  After concluding an update of the software of ms on 09/09/09, restart vista. Boot vista system good to load the monitor says no signal and stops. Vista keeps going with the sounds of startup vista responsible for confirming. A made a forced stop and start in safe mode. Monitor now works. Go to the device, active graphics card Manager - said it was ok. There was no monitor icon in the list. Updated graphics driver while there and rebooted. Still no monitor. Vista restored one week before the problem - same problem. Removing graphics card and initialized using the graphics card integrated and faithful old crt screen and device manager says there is a monitor. Nvid uninstalled drivers, restarted with vista and a map nvid in loads of drivers, restarted - same problem. Bought the new 8400 graphics card and equipped - same prob. Reinstalled vista - same prob.
  There is no other program on this to clutter anything in System. At the most recent drivers, even mounted new graphics card.
  Help please.

  G ' Day Manasa P, problem solved! Unfortunately no you (not disrspect to you somehow). As I said no monitor icon in the Device Manager. Change the drivers of graphics for the standard vga drivers to fix the problem. reboot to normal. Device Manager should now list monitor. Load the drivers depending on monitor. Restart and load the drivers for the graphics card via Device Manager. reset. I hope that fixed the problem.
  Thanks for your help, realize looking at the list of problems you have hard time, trying to unravel the problems of other people. That good luck.
  Hope you can pass on my stationary and can save you time.
  Concerning
  Robert Park

• The device icon and text missing in the imaging devices Manager

  The device icon and text missing in the imaging devices Manager

  I'm running MS Vista Ultimate.

  The imaging device icon and the wording are missing in Device Manager are missing. A device is listed in the box as installed missing icon.

  The other devices in Device Manager normally appear and I can compare what is supposed to be there for another computer running the same version of windows.

  However, the device will not work and will not reinstall.

  When you try to reinstall the device an error indicates that Setup does not work and to contact the manufacturer of the device.

  Yet once, however, this happens when I try to install any imaging device.

  I'm unable to locate information about the imaging devices in the registry.

  I think that some registry entries are missing.

  It is not the missing peripheral individual. This is the section in Device Manager.

  The image error is logged:

  "Windows didn't load setup." Contact your hardware vendor. »

  This happens with any device inaging of anyone.

  Hi henrymullersr

  What imaging device do you use?

  We can try a few steps and check if it helps you.

  Try to run the hardware and devices Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

  If the result of the Troubleshoot utility is negative, then reinstall the device. And also be sure to uninstall the previous contents of the device driver by running utility windows install cleanup:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now follow the following steps:

  1. Save the Windows Installer Cleanup Utility package on your computer

  2. right click on the Windows Installer Cleanup Utility and run as administrator

  3. follow you prompt in the installation wizard. Once completed the installation, click on the Start button

  4. click on all programs. Click on Windows Install CleanUp Utility.

  5. click on the device driver (if on list) in the list of programs.

  6. click on Remove. Click OK

  7. click exit

  Restart the computer for the changes to take effect
   
  Then try to install the device driver and check the result: http://windows.microsoft.com/en-US/windows-vista/Install-a-USB-device

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't access my USB ' s__ & I lost my USB icons in my device manager

  Once I used the XP Backup program '

  or the other of my USB port does not work"

  When I click on MANAGE MY COMPUTER, no USB icons where showed"

  What should I do?

  Hello

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  If a PC and if necessary the embedded USB can be disabled and a USB card can be used only
  is not expensive. For a laptop, using a real computer shop (no leeks and glances at a Best Buy
  or other stores) or system manufacturer support.

  ------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD drive icon has disappeared from the Device Manager and my computer

  DVD drive icon disappeared from the Device Manager and my computer. I m using window 7. How can I get it back.

  Ashwani Hello,

  Thanks for posting on Microsoft Community.

  There are various reasons why a CD or DVD drive may not be detected. I would like to ask all of the steps in the Microsoft Article describes a troubleshooting and check if they help to resolve the issue.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  Note:

  Before editing a registry key or subkey, we recommend that you export, or make a backup copy of the key or the subkey. You can save the backup copy to a location that you specify, for example, a folder on your hard drive or a removable storage device. If you make changes that you want to cancel, you can import the backup copy. For more information about backing up the registry, please see the link below.

  How to back up and restore the registry in Windows

  Hope that advice is useful. Let us know the State of the question, so that we can guide you further.

• HP Pavilion 15 laptop: bluetooth drivers are not not in Device Manager

  I have a HP Pavilion 15 laptop. I upgraded my windows PC 8.1 for Windows 10 (64-bit) and bluetooth in the box wireless icon is missing and I do not see the bluetooth drivers in the device manager driver custom anymore.my bluetooth introduce yourself at all, I tried unistalling all pilots under networking and their resettlement and my internet has and is working fine. Although the bluetooth does not appear in the devices I have no idea why I worked hours so he could work with anything does not. Also I do not understand how the Bluetooth support service can run withpout a good driver installed. I just want to be able to use my headset bluetooth on my laptop. I tried all the drivers, I could think too much of that and similar to laptops.

  Please help me fix this isssue!

  Hello

  Your HP Pavilion 15-p043cl has NO Bluetooth:

  1. characteristics:

  http://support.HP.com/BG-en/document/c04316163

  2. the parts list:

  http://PartSurfer.HP.com/search.aspx?SearchText=G6U06UA

  Are you sure that he intended to Bluetooth before the upgrade? Maybe a different machine.

  Kind regards.

• Device Manager does not display satellite M305 - webcam

  I would frequently turn on/off the camera in Device Manager. However, now I can't find. Any where. I go to the Device Manager and there is no icon of imaging devices, it's like he disappeared. I don't know what to do. :( I tried showing Hidden icons, once again, by downloading software etcccc.

  I really need help.
  Thanks for your time!

  Hi Lynne21T,

  > I tried hidden icons showing, again by downloading the software
  Have what software you downloaded exactly?

  In your case I would try reinstalling the Driver software of the camera. Remove the old version first and then install the latest version from the Toshiba site.

• Satellite Pro M70 - WLAN adapter is not listed in Device Manager

  Hello!

  I just formatted my drive and reinstalled Windows xp and now I can't turn on the wifi. The light is on and the switch is on but it does not work.

  I downloaded all wlan drivers but nothing has worked. In the Device Manager I also can't find any WLAN card. In device manager there is an icon * devices * with a qustion-mark and he said * network control *.
  This is the WLAN card.

  Until I reinstalled Windows it worked fine so the problem is not mechanical.

  Help, please. my laptop satellite pro m70, don't model no psm76e/00e005g3

  Hello

  If the normal LAN card is already recognized correctly need wireless network card, then you should try to install the WIRELESS driver from the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, the local network card device can be activated with the hardware switch on the computer laptop and FN + F8.
  Check it!

  Good bye

• In Device Manager it says code 10 - this device cannot start (read message)

  In Device Manager next to the icon for pioneer DVD - RW DVR-K17A Device, it has a yellow! triangle and when I click on it, it says this device cannot start code 10. I received the laptop in June and had not noticed the problem til now. When I followed the instructions for possbily install updated drivers/software I did but said that I am up to date.
  Thank you

  First of all: what kind of machine do you have and what operating system is installed on your laptop? Without this information, no one would be able to help you.

  Regarding your problem: I could check this site-> http://support.microsoft.com/kb/943104/ or check this document-> http://support.microsoft.com/?scid=kb%3Ben-us%3B314060&x=12&y=13 (I know, is not the error code of your question, but you can try anyway :))

  Greetings

• Satellite A500-17 x - wifi does not work - not found in Device Manager

  Hi people,

  I need help please.

  My wireless adapter does not work.
  It worked perfectly until I connected to a wired connection in a hotel I was staying in and since then I can not connect to my wireless router.

  I tried restoring the tosystem several times to old dates, but it has not solved the problem. When I restart the computer laptop and go into devices and printers, I thought that the computer needs to be troubleshooted.

  The program runs and try to install the driver for the Wlan but returns with errors. Namely, windows could not load the driver or can verify the digital signature.

  There is also no icon in the network for lan wlan connections only. When I use the radar in connectivity doctor tells me that the WiFi network is disabled but I can't understand how to activate it.

  When I start in safe mode and go to Device Manager I see the wireless network adapter, but when I try to install the driver I leave safe mode and restart. I did and then the WiFi network is displayed in the Device Manager but when I try to load the driver, I thought that the driver is updated and then the adapter disappears from the Device Manager.

  I'm so frustrated at this point and I'm very close to a full erase and start over.

  I also tried to reload and load the default configuration settings in the installation program, but didn't make any difference.

  My laptop is a Satellite A500-17 x with windows 7 64 bit.
  The WiFi network is Realtek RTL8192E Wireless Lan 802.11 PCI - ENIC

  Hello

  Go to BIOS (press F2) and set it to default settings.
  Save the changes and restart the device.
  Then try to reinstall the WLan driver again.

  If that does not help, download the most recent and updated BIOS to BIOS first day.
  Then, restart the device and try reinstalling the Wlan driver.

  Last but not least you could test the WLan feature on laptop running with factory settings current (after using the Toshiba Recovery)

  PS: in order to use the WiFi network you must use the FN + F8 key combination and must turn on the WLan (in front of the laptop) switch to position.

• Carpet * a DVD 850 s ATA Device (CD player) - Code 19 error in Device Manager

  I have a problem in my DVD player, I have * mast * a DVD 850 s ATA Device *, there driver not working anymore. Now Iam not able to run my CD/DVD. Every time I have insert any disc, nothing happens even the DVD drive icon is not there in * computer file. I opened the * Device Manager * and I got this message when I click on properties
  * "" Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. " (Code 19) » » *

  I tried updating the driver but it says "" your driver is up to date "" I don't know what to do...

  Please help me! I will be very thankful to you

  Thank you

  Concerning
  Faisal

  What model laptop do you have?

  Try to remove the CD/DVD filters in the registry.
  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  This utility can remove the filters for you:
  http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

• Re: Satellite P500 - Wireless disappeared and are not not in Device Manager

  Hello

  I had a P500 Satellite with Windows 7 weeks and on my network wireless at home, a few days ago the wireless on the laptop disappeared completely! Completely disappeared from the Device Manager, does not even appear as an unknown driver. Updated to the latest driver, but that has not solved anything, switch wireless is enabled, but the wireless near the switch icon is red and pressing fn + F8 does nothing. Its almost as if this laptop is not wireless! No mention of what anyone in the network connections.

  Found something on the Toshiba said that updating the drivers, but that has not helped. Anyone else had this issue or know how to solve?

  Thanks for the help

  Lee

  Hello

  > Completely disappeared from the Device Manager, does not even appear as an unknown driver. Updated to the latest version of the driver but that has not solved anything, switch wireless is enabled, but the

  It looks like a malfunction of wifi module if it is not listed in Device Manager. To be sure it is hardware related issue, restore the factory settings. If it still does not appear, the wifi module is unemployed. In this case, contact the service center or buy the usb wifi dongle

• XP Device Manager shows me 'PnP BIOS Extension' with a yellow top flag

  I tried to load the new software for an HP printer and it would not load correctly. I checked the Device Manager to see if the USB port has an error, but instead I see an icon with a yellow flag on it in "System devices". The name of the icon is 'PnP BIOS Extension'. I just click the mouse over it to see the Properties , and there are three tabs: general, pilot, Details

  the device status window general tab has this message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39).
  
  
  Driver tab, it says:
  Driver provider: unknown
  Driver date: not available
  Driver version: not available
  Digital signer: not digitally signed
  On the Details tab, it says: ROOT\SYSTEM\0003
  I tried the driver but it failed with the message: the hardware was not installed because the wizard cannot find the necessary software.
  
  
  Can someone help me understand how to fix this problem?

  Well you can right click on it, select "update driver..." Or, try to update the

  Hp BIOS, if its current, you may have a defective battery on board, it would be

  give some data, but perhaps not all, anytime, cold weather brings on battery

  and the questions of the bulb... Also, try to update the software of the chipset advice, get it from its

  MFG (intel, amd, etc.), which gives the ability to run hardware tips xp...