GfxUI.exe has stopped working after rebooting the computer.

Similar Questions

• Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

  Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?

  Hi Andy,.

  I checked the reported compatibility list, and the game is listed as compatible.  Work in 64-bit or 32-bit Windows 7?  I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently.  If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem.  Let me know if you've done all that and you still have questions, and we can try something else.

  Kevin

• Development in error "Installer.exe has stopped working" while installing the new modem.

  Development in error "Installer.exe has stopped working" while installing the new modem. I try to install the ZTE AC8710 modem on my 32-bit windows vista (home edition) system, but whenever the facility is subject to the full I get the error 'Installer.exe has stopped working' and complete Setup doen't. The same error is hit when I try to uninstall the ZTE modem that is installed intestinal. The installation file has CD/install drivers for windows vista. Information below is displayed in the application event viewer for this error log. Help, please

  Log name: Application

  Source: Application error

  Date: 2010-01-03 02:04:50

  Event ID: 1000

  Task category: (100)

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Monica-PC

  Description:

  Application Installer.exe, version 0.0.0.0, time stamp 0x4b208462, Installer.exe module, version 0.0.0.0, time stamp 0x4b208462, exception code 0 x 40000015, offset error 0x0002efec, 0xadc process id, failed failed application start 0x01cab8b5797299e1.

  The event XML:

  1000

  2

  100

  0 x 80000000000000

  309

  Application

  Monica-PC

  Installer.exe

  0.0.0.0

  4b 208462

  Installer.exe

  0.0.0.0

  4b 208462

  40000015

  0002efec

  ADC

  01cab8b5797299e1

  Hi Tonio saini,.

  Navigate to the location of the programs .exe file and right click on the .exe file, and then select run as administrator to install the modem.

  You can also check the following link, try the suggestions and check if that helps:

  http://social.answers.Microsoft.com/forums/en/w7hardware/thread/4ce21286-3a77-4A06-923c-889d657f8e33

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• G72-a20EM screen has stopped working after updating the BIOS F.48.

  How is it possible that BIOS update recommended could turn off the LCD screen.

  Currently I see almost anything on the screen, but vga port works. But increasingly,.

  Intel graphics card is not recognized.

  G72-a20EM screen has stopped working after updating the BIOS F.48.

  What can I do to fix that?

  Good news!

  I found the working version, and it is version F.08.

  Supposedly new version have different Active cables, and this is the reason why the screen is dark.

  So, case closed, everything is perfect.

• Get error "ggsci.exe has stopped working" after the upgrade of OGG 12.1.2.0.0

  Hi gurus of the Oracle,.

  I'm testing the OGG Version 11.2.1.0.19 to 12.1.2.0.0 upgrade. But after upgrade, I am getting below error while trying to access ggsci.exe

  ggsci.exe has stopped working

  If followed the steps (GoldenGate 12.1.2.0 Install/Upgrade on OEL 6.4 x 86-64 |) Blog of Maaz Anjum)

  1. stop all processes Ogg

  2. has taken the old OGG home backup

  3. call the YES program and gave the location of the OGG existing House 11 G

  4. once the upgrade has completed, I tried to access the ggsci.exe but by mistake. Setting error image.

  

  If someone has solved this problem. Please help me.

  Best regards

  Jamsher Khan

  I strongly suggest to talk to support.

• Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

  I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

  This happened to someone else? Is it I can do it fix it?

  Hello

  Since you get such a serious mistake, I would use the free incident reports.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• NTVDM. EXE has stopped working/necessary for the game silent steel

  I have a Dell 8250 under Vista Ultimate desktop computer with a lot of memory.  I want to play STEEL SILENCER but must have ntvdm.exe working to run it properly.  I can use the program compatibility Wizard, but still need the ntvdm.exe.  Can you please help?

  Hello sgreggary,

  Thank you for using the Microsoft Answers forum.  To resolve this problem, use the tool (SFC.exe) System File Checker.  To do this, follow these steps:

  • 1. Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

  When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

  Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

  Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

  This can be caused by the NVIDIA chipset driver:

  https://decibel.NI.com/content/message/46299?TSTART=-130

  Thank you
  Sacha

• I get the message AIOC. EXE has stopped working how to fix this

  How can I fix my system that aioc.exe has stopped working

  Hi Neil,

  Thanks for the reply.

  I need a little more information of the computer with the problem. Please help me answer the following questions:

  (1) what is the brand and model of the printer?

  (2) which toolbar is installed on your computer?

  (3) you are able to print after receiving the error message?

  (4) you have problems with the normally another impression of the toolbar?

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Whenever I turn on my laptop the first thing he tells me is that Pamke.exe has stopped working.

  Original title: pamke.exe

  Whenever I turn on my laptop the first thing he tells me is that Pamke.exe has stopped working. Can someone tell me please, what the heck is trunosc? I googled but no dice. Is there something wrong with my laptop? How can I fix? I'm kind of a perfectionist, and I'm tired of seeing it every day. Any help would be greatly appreciated. Thank you.

  Hello

  1. When did you start to question?

  2 did you recent hardware or changes to the software of the system?

  Method 1:

  You can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Method 2:

  You can also read the following article to run the Microsoft Safety Scanner and perform a full scan on your computer.

  Microsoft safety scanner

  Note: When you perform the analysis, there are chances of losing the data that you can take a backup of important data before performing analysis.

  Hope this information is useful.

• Receives the pop-up indicating that tieobnu.exe or tieoubnu.exe has stopped working

  Original title: tieoubnu.exe

  I get a pop window indicating that tieobnu.exe or tieoubnu.exe has stopped working. I can't find this program on my computer or by Google search?

  Any ideas? [Moved from the community involvement Center]

  Hello

  Google has no information on these names, so it can be a left over Malware boot entry that was removed from your security programs.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  «How to use MSCONFIG in Windows 7»

  http://netsquirrel.com/Msconfig/msconfig_win7.html

  You can also use this free program to do, too:

  "Autoruns for Windows V12.03"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• After you install torchlight 1, my PC stops several times and gives an error "torchlight exe has stopped working".

  Hello, I recently bought torchlight 1 for my pc, Windows 7/Vista. Ive had my pc stop repeatedly. I contacted technical support of Torchlight, sent files Dxdiag and msinfo, after reviewing, the suggested running in safe mode, but, after having tried 2 times, each time, got a dialog box stating "" torchlight exe has stopped working '. " When I send a tech, their eval was as follows:

  Looks like it's a question of system rather than a question of the torchlight.  I say this because, as the game has been started in SafeMode only the windows system files are loaded into memory.  So, when Torchlight.exe attempts to access these files with torches can not due to a problem with your file system.  At this point, the only options are the following:
   
  (1) create a new user profile and attempt to play the torches of this new profile.
  (2) depending on how long it's been since your last windows installation costs, you can try to repair windows to resolve any system problems of files or reformat your PC
  (3) contact the Support technology Windows to help your application for stay of troubleshooting problems.
   
  Using technicians on site for your comments, is their a problem with my Windows 7?

  As torchlight works perfectly on my Windows 7 x 64 laptop, I suppose that "it is a question of system rather than a question of the torchlight", too. Especially when your system shuts down instead of simply display a message on a program "stopped working", brings us to this conclusion.

  The most common causes for a corrupt Windows are "optimizers" of sorts (registry cleaners, etc.), the over-zealous antivirus programs and incomplete software installations. This can affect your overall performance of the system, not only the proper functioning of a game, so reformatting/reinstall or restore an unchanged system image from backup may be the safest advice.

• The process Web Kit 2 Web, exe has stopped working? What is this and how do I get rid of him.

  Whenever I send an email that the warning box appears - WebKit2 process Web, exe has stopped working. I hit close program, then he gets me out of my Inbox.

  If I do not close the warning box my computer would you like s in limbo. What is is? It is not in my control panel and is not launched as program in my computer.
  Help?

  You will find support for Safari (browser) in this forum-online https://discussions.apple.com/community/mac_os/safari?categoryID=169

• By updating the Garmin GPS, I get the error "Bootstrapper.exe has stopped working".

  Bootstrapper.exe has stopped working!

  Hello!  I try to update my Garmin GPS and have saved the program on my desktop.  When I open it, the program retrieves and then I get the message: "Bootstrapper.exe has stopped working".

  I searched the internet and forums of Microsoft for answers, but I don't know why this is happening.  I followed an instruction in the forum by changing the setting of the DEP to just windows and programs and do not apply to ALL.  I restarted my computer and I tried to rerun the Garmin update.  I got the message again.  Y at - it somewhere on Microsoft where you can download just the ' Bootstrapper.exe by itself?

  All the updates of Windows and Microsoft are up to date.  I am running Windows Vista Home Premium, 32 bit, pack svc 1 & 2.  Could someone help me please?  I'm pretty knowledgeable with computers, but it frustrated me no end.

  Thanking you in advance,

  stillcrazyat49

  Hello
  
  1. have you made changes to the computer recently?
  2. the program is already running while update you?
  3. where did you download this update?
   
   
  Method 1.
  I ask you to re - download the update and then try to install it. Its possible this bootstrapper is damaged. If the problem persists, then put the computer in a clean boot state, and then try to update.
  May be a third party application is causing the conflict.
  
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  
  Method 2.
  If the problem persists, it is recommended to contact Garmin support and check.
  http://www.Garmin.com/Garmin/CMS/site/us/support/
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "MessagingApp.exe has stopped working" error when I turn on the computer.

  In the last few days I have been making a "MessagingApp.exe has stopped working" message every time I spend on the laptop. When I go to "All programs" all windows and Yahoo programs are red in color. I did a search for "MessagingApp.exe" but it is not found, but when I looked in 'Program Files'-'alternative E-mail' I found it but it will not run. I can't connect to Yahoo Messenger.Can help you? I have Windows Vista Home Edition thank you, McEvor

  original title: error MessagingApp.exe

  Hello McEvor,

  1. don't you make changes to the system before the show?

  2. Since when have you been faced with this problem?

  Try the following steps to try to get the fixed number.

  Step 1:

  Try to put the computer in a clean boot state to see if the same message appears

  A clean boot helps eliminate software conflicts. Visit the link below to learn how to perform a clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Once the troubleshooting is over; reset the computer to start as usual in following step 7 from the link above.

  Step 2:
  An analysis of security and verification for infections.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  1. you can run a virus scan online from the link given below and check if the problem persists.

  Microsoft safety scanner

  2. in addition, make sure that you have installed on your computer, antivirus software was last updated so that it works correctly.

  If the problem persists, please contact support messenger yahoo from the link below for more support.

  http://help.Yahoo.com/l/us/Yahoo/helpcentral/

  Hope the helps of information provided.