Gigaframe L80 problem-"standby".

Hello world

My Tosiba Gigaframe L80 new does not work correctly. I m using a microSD 1 GB with adapter to introduce my photos. The problem is that when habe worked about 30 minutes, gigaframe enter in standby mode, the buttons are not functional and the only option is to put the equipment turned off.

-Does anyone know what I need to do?

Hello Vitara,

you have enabled the auto-off function? It seems that Yes!
You will need to disable this feature.
Please see the "settings" - "Auto On / Off"-"Set we / off ' to 'Off '.
The L80 should now be lit permanently.

concerning

Tags: Toshiba

Similar Questions

  • Gigaframe L80 - Windows doesn't recognize it as a second monitor

    Hello

    I have a Toshiba Gigaframe L80 but is not fully functional.
    Windows doesn't recognize it as a secondary monitor so I can't extend the desktop in the framework.
    Only works in clone mode.

    I tested it on 2 computers according to the manual and the addon, I installed the .NET 2.0 (and 3.0) and I use the software/driver that comes in the box, but it is not recognized and is not shown in display properties.

    Can you help me?
    Is there a driver/software/firmware for the L80 was updated to fix?

    Anyone with the same problem?

    Hello

    I found this info:

    Sub visualization allows the Gigaframe to act as a second monitor for your PC
    To activate the view Sub follow these steps:
    (1) install subview on the laptop.
    (2) in the main menu of gigaframe select settings, then press OK
    (3) select subview and press OK
    (4) select and press OK. Now the Gigaframe is in display Sub mode and is not operable.
    (5) connect the GigaFrame to your PC with the supplied USB cable
    (6) run the subview on your PC software
    (7) the display of Sub pop window, display the current screen display in the gigaframe

    By activating the function void View the willing Gigaframe of two display modes:
    Scope and the Clone mode.

    To assign the suffixe_etendu mode_ Gigaframe follow these steps:
    (1) right click on the desktop and select properties from the menu
    (2) in the display properties panel select the settings tab
    (3) under the view drop-down list, select 2. default monitor on Subview
    (4) check the option extend my Windows desktop on this monitor and the bottom of the settings tab

    Note: in extended mode screen gigaframe becomes your office extensions!

    To set the Gigaframe in _Clone mode_ follow these steps:
    -Uncheck the extent my Windows desktop on this monitor option!

    The gigafmae display the same screen as displayed on the monitor of your PC in Clone mode!

    Love let you subview job function properly, please consider to stop your acceleration DirectX function! _

    If you want to play the video on the Gigaframe, you must select it * as primary monitor! *

  • Gigaframe L80 forget automatic power switch time and brightness settings

    Hello world

    I'm on my second gigaframe l80 and it has just developed the same problem that the first seems default back to factory settings.
    Then he forgets his automatic power switch time and very annoying brightness adjustment!

    Has anyone else had this problem?

    a soon fly

    Hello oozie.

    I also own a Gigaframe L80 and it works very well.
    Have you plugged the permanentely power framework (using the AC adapter)?
    How long does it take, the framework sets the default settings?
    Have you tried "reset" of the image using the small button on the bottom of the frame?

    welcome them

  • Gigaframe L80 not to honor the exif orientation flag

    I have pictures on my SD card who put the exif orientation flag. The GigaFrame L80 does not turn to them.

    Do - Canon
    Model - Canon EOS 400 d DIGITAL
    Orientation - top-right

    This site explains the different values that may be present on the ground.

    http://www.ImpulseAdventure.com/photo/EXIF-orientation.html

    Please firmware can be fixed to include support for it.

    I ve checked the Toshiba support page and, unfortunately, I didn't find anything that can help.
    From time to time check. Maybe Toshiba will offer a firmware in the future.

    Gigaframe L80 is nice and I like it a lot. What is your experience with it? Are you satisfied with the functional point of view, except the problem of flag exif?

  • Flash.Media.Sound get his break problem standby 2.0 playbbok

    Hello friends,

    I have a problem that sounds break when lock us the screen manually and automatically sounds is a break and when unlock us it resume the sound but I need to play the sound in the context of pending cases.

    As iam using the api Flash media.sound.

    Please help me on this thanks in advance to all my friends.

    in the file of the bar - descriptor.xml, try to set:

    strangled

    Also try:

    NativeApplication.nativeApplication.systemIdleMode = SystemIdleMode.KEEP_AWAKE;

  • Gigaframe L81 does not play sound in the videos shot by Nokia phone. Q81 can do?

    Hi all.

    My parents bought Gigaframe L81 photo frame.

    My mother tried to use the photo frame to see the videos shot by her Nokia phone. And the problem was only that no sound has been replicated by the photoframe

    AFAIK, new Nokia phones shoot videos in the following format
    Video: MPEG4 Video 640 x 480
    Audio: AAC 48000 Hz mono 768 Kbps

    When I look at Gigaframe L80 & L81 features at the stop. quote
    http://www.Toshiba.EU/PhotoFrame/detailsl80.htm
    I see that it is said in support of only Audio: MP3

    At the same time Gigaframe Q80 & Q81 claim to support more audio codecs:
    http://www.Toshiba.EU/PhotoFrame/detailsq80.htm
    Audio: MP3, AAC, OGG

    So, I have the following questions:
    (1) are Q80 & Q81 models actually higher than L80 & L81? My parents thought that L80 & L81 are better models, because they have a bigger screen. They thought that L80 & L81 should have more features. But it seems that Q80 & Q81 support more audio formats...

    (2) & Q80, Q81 don't actually support AAC & AAC in MP4 video files audio streams support?

    (3) how do I know if Toshiba will add support for AAC to L80 & L81? Or maybe my parents sell their L81 and buy Q81 or something else?
    My parents are not going to use the software that comes on the CD to convert their videos, the software first because is too difficult for them, the other reason is that it takes time to convert the videos to the formats supported by the framework, and that means that all the benefits of using an image on a PC went...

    Hello yura-v,.

    I am also a user Gigaframe L81.
    I asked the Support Toshiba team, if he releases a firmware update or something.
    They said no. Toshiba is not going to add support for AAC to L80 & L81 right now.
    If Q80 & Q81 actually support AAC & AAC audio streams support MP4 video files, I cannot say for sure, because I only own a Gigaframe L81.

    I think the best way is, your parents must buy a Q80 or 81 and test this.
    If both this doesn´t supports AAC streams they could restore the frame within 14 days.

    If they support the AAFC, they can sell their L81 framework and celebrate the Q80 or the Q81.

    Best regards

  • Tecra A2 won't come out of standby

    My Tecra A2 laptop is not from standby mode several times.
    I had to remove the battery for a few minutes and replace new until it works again.
    Ideas and suggestions appreciated.

    Thank you.

    Already updated the BIOS?
    On multiple machines, the BIOS update has solved these problems standby.
    You should compare the BIOS installed on the laptop with the BIOS available on the page.
    I think that there should be a more recent version.

  • L80 Gigaframge driver for Windows 7

    Hello

    There is no driver for gigaframe L80 for Windows 7 working as a clone or something else?
    I also tried looking for a vista driver but I found nothing.

    Thank you

    Hello

    I think that the extra driver is not necessary
    I mean you can connect the gigframe to the laptop or computer and can select the external display output in the graphics settings of s for laptop

    Usually, you don t need all the drivers if you want to connect an external monitor (any screen that is) to the computer

  • Satellite L505D - problem with mode standby in Windows 7

    It's me again, in the last thread:

    "Hello friends,

    I have a big problem when Windows 7 updated itself. I have a laptop Toshiba Satellite L505D. When I close the lid, it will automatically 'sleep' mode. Unfortunately, the screen is black and the laptop is still in progress, I have to stop it and then turn. Is it a problem with the driver 'stack '? Please, help me :)). "

    The mode 'sleep' worked perfeclty for a few days and it's still gone... What more when I try to enter the mode "sleep" I can't do anything on the laptop, it still works on the white screen and the transformers fan works high speed. In recent days, when the "sleep mode" worked, windows has no update...

    I don't know what is happening... :) Weird problem, isn't?

    It is not easy to say why this is happening. In your last post, you wrote about some updates of windows. Who knows what's wrong there.
    If nothing is done, not even system restore and you want to use the standby mode I recommend you save all your data and install the new OS by using recovery mode.

    With the settings everything's going to be OK but then be careful with updates.

  • Satellite 1905 - problem with the touchpad after awakening from Hibernation/standby

    Greetings.

    I've known a few interesting problems with my Satellite 1905 - S301.
    Whenever he wakes up from hibernation/standby my touchpad stopped accepting "taps" as a click on the left button of the mouse. It works normally with finger motion detection, but stops at all but it is quite annoying to restart the machine whenever he returns from hibernation mode.

    I've done a small workaround and after I close the laptop lid still works but this isn't the way it should work, I would have preferred that she either Hibernate than running for 10 hours without any sense;).

    Can someone give me the solution to this problem, please?
    Thank you in advance.

    Kind regards
    Akar

    Hello

    I agree with you. It s very boring to restart the machine each time to use the touchpad.
    This problem appears on the first day?

    I think there might be a software problem and, possibly, the new installation of operating system recovery CD Toshiba could help.
    I know, the complete installation is not the best solution, but it might help.

    You should also check you the touchpad. Satellite 1905 - S301 was designed for the U.S. market and so I checked the American website for available drivers.
    It seems that 5.3.203.2 is a newer version of the Alps touchpad driver for Windows XP.

    I suggest to reinstall the touchpad driver and check if there is no improvement.

  • T60 - problems with long active standby

    Hi all

    Hopfully, can someone point me in the right direction with a problem I encounter with one of the ThinkPad T60.

    Here's the run down:

    We did 3 of the T60 (type 6369-A56) last December (online sales of web). 1 of the three displays problems when dealing with the day before. If the laptop goes into sleep mode during more than anywhere between 30 minutes to 1 hour that the laptop is not repeated mode standby when you open the lid of the laptop or use the Fn function key. When two approaches to bring the laptop leaves standby mode the Moon cresent LED stays on, the HARD Drive LED turns on for a brief second and then turns off, the power light and strong say, the screen remains blank at any time. When this happens, you can hear/feel the disk HARD turns to the top and doing something and you can also hear the CPU fan spin in the action as if it came out the day before. Does not seem to have taken power to make a difference with this problem.

    I already talked to Lenovo support RELATIVE to this subject and they believe it's a software problem. I did a few more tests to try to determine that this is what I did...

    I took a Norton Ghost image of one of the 2 working T60 HDD (Eve works perfectly on two other laptops) and used this Image for ghost in the T60 defective HARD drive, this gave me two identical laptops (hardware and software). Power for laptop mode is as follows, turn off the display @ 5 minutes, switch Mode suspend @ 15 minutes. I left computers laptops only at exactly 09:05, 5 minutes later so empty screens, @ 15 minutes later, the two went in standby mode. 45 min after sleep mode had struck I returned to two laptop computers and for laptops (at the same time), use the Fn key and the defective T60 does not return from the day before and the same symptoms as mentioned earlier it happened.

    After this I decied to see what would happen if I changed the HARD drive between laptops (from the laptop failed drive in the laptop to work), failed hard drive of the laptop working in laptop. After the passage of the HARD drive, I ran the same tests as above. Yet once, 45 minutes after the day before had been very active, I used the Fn key to get out of sleep mode and the laptop with the failed hard drive from the laptop worked directly at the exit of the batt, but the hard drive of the laptop from work to the faulty laptop displayed the same problems as mentioned above thus excluding the software as the cause of the problem.

    My question is, knowing all this, where is the problem likely to be? Is - it's going to be RAM related or associated with Board?

    The result of likley going to be back to Lenovo for repair?

    See you soon
    Chris

    Hello

    Yes, after trying one number of other things I determinined it was the motherboard at fault. Introduced a job guaranteed with Lenovo and returned to the unit for repair. Less a week we had it back, running without problem (they replaced the sys Board).

    See you soon
    Chris

  • Problems with Windows 10 screen standby and sleep mode

    After downloading 10 Windows on my desktop all-in-one HP, I have problems with the display of standby and sleep mode.  When the computer turns off, he doesn't have the bright screen.

    After the upgrade to Windows 10, some laptops have experienced one or more of the following symptoms:

    • > Power LED remains lit after stopping
    • > Computer enters standby or hibernation.

    HP recommends that customers see these symptoms first update the graphics drivers by removing and then reinstalling the hardware in Device Manager.

    See the section updating the graphics driver from where can I find drivers Windows 10 and software for my model?

  • I'm having a problem with my power supply options, no matter what I do, it goes automatically into mode standby a few minutes running.

    I keep changing power options, even the one who always says, but this isn't help even when I restart after setting up things. It will just automatically to stand-by after a few minutes, no matter what I do, most of the time and not always. so it happened me really confused as far as what I need to do.

    Hello

    You did changes to the computer before the show?

    Method 1:

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    (http://support.microsoft.com/kb/322756/)
    How to back up and restore the registry in Windows
     
    You can check if for a network card power management is disabled.

    How to disable for a network card power management when you deploy Windows XP

    http://support.Microsoft.com/kb/837058

    Method 2:

    Log on to the computer manufacturer website and update the latest drivers for chipset, BIOS (Basic Input\Output System). Also, look for other updates to the device driver.

    Reference: How to manage devices in Windows XP

    Note: Update of the BIOS can be a complicated process, and if an error occurs, your computer could be rendered unusable. Be sure to observe the instructions of the manufacturer.

    You can see the following article for more information:

    How to solve the problems of hibernation and standby in Windows XP

    http://support.Microsoft.com/kb/907477

    Let us know if it helps!

  • the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

    the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

    Hello

    · Were there any changes made on the computer before the show?

    You can check the link: how to solve the problems of hibernation and standby in Windows XP: http://support.microsoft.com/kb/907477

  • Standby problem

    When I wake up my spare computer that lights up the tower and I have to turn off the tower and restart the computer to make it work.  If anyone can help, it will be a great help. If you think that my answers are useful please vote and mark as a possible answer. Thank you.

    I think I could have found out what's happening.  I've recently been delivered with a card reader chip USB of British Gas.  I think that if it's on when I put my computer to sleep, wake up the computer is avoid a complete wake up.  I currently trying several Standby with the player UN plugged and then perform some with hip drive and report back.  Currently, I expect the delivery to a hub if I can do these tests without crawling on the back of my office to plug and unplug the drive.

    With respect to the monitor, there is no anomaly whatsoever and all my gear is less than 12 months.  It is not the monitor that doesn't wake up, it's only partially wake the computer.  I wonder if it's an OS problem or a problem of material/mobo.  It has no listed conflicts or errors in the eventviewer Manager or device.

    If you think that my answers are useful please vote and mark as a possible answer. Thank you.

Maybe you are looking for

  • HP solutions Center not in new printing software

    I recently bought the HP Photosmart e-all-in-one 7510 device, it replaced my HP J6480 all-in-one. One of the programs with the software J6380s has been that something called "HP solutions Center." I ended up uninstalling the Solution Center and all t

  • CM100 modem does not work with BELKIN router

    Hello I just bought a CM100 used on eBay, so I can get rid of my Charter rental, but it doesn't seem to work with my BELKIN router. The model number is BELKIN F5D7230-4. I tried everything, but the 'CONNECT' led will continue to Flash. I thought it w

  • Lost my admin previlages...

    Due to a problem, I removed the users in property of c drive (where my operating system installed) and then in the Security tab (ex.system, authenticated users, admin etc all including mine also) Now the problem I put is I can't do anything. I'm not

  • JOINT error message

    someone has an idea of what the error message says when you run a command to SHOW the IP TRAFFIC on a METHOD? (Im connected like ciscoids and IDSMk9-sig 3.0 - 5 - S33) "idsm2 # show ip traff. Monitor statistics Interface: "Error: no sufficient privil

  • CUPS and OCS - InterDomain-Federation

    We test the CUPS and the OCS and later, we will test with "CUIMOC".  My question IM between the two. In CUPS, it seems, the ID of the end user @... is based on the domain setting in CUPS that can be anything, so for now I put it in the NET. INTRA and