Gigaframe L81 - after 2-3 seconds, the LCD screen turns off

Similar Questions

• LCD screen turns off after a few minutes

  My screen turns off after a few minutes, even if the parameters to be able to say that he should turn off after 60 minutes of no activity.  Before this date should activate the screensaver after 10 minutes of no activity.  But in my case the active screensaver ever and my right monitor fades to black.  What can I do to fix this?  Is there a registry setting that has changed I don't know?

  -penciline

  I checked power options, the first thing, and then I checked the (NVIDIA) graphics card Control Panel to see if there is a setting for it.  The figures that I had in my previous post came from my power options, but I don't know how standard power who do not have the numbers that it would affect the schedule/performance options.  I went to advanced settings.  But I also rebooted my computer which solved the problem, in my opinion.  I'll have to sit and wait to be sure, but I'll get back to you on that once I have test.

  -penciline

• LCD screen turns off without reason - Satellite M40X

  I have a problem with my laptop Satellite M40X, I work when the LCD turn off and I hear two PIF. To turn on the LCD screen I need to restart the laptop, but the problem persists after a few minutes.

  Can someone help me, please.

  Hello

  Here you can compare the version of the BIOS installed on the laptop with the one published on the page of the Toshiba driver.
  If you use the older BIOS, you can try to update. Maybe the update will sort this strange behavior.

  But there could also be a hardware malfunction if the BIOS update does not help.

• the phone screen turns off during a call... No control over the phone

  My Defy screen turns off during the reception or to make a call... Impossible to control the phone... need to take out the battery to turn off the call... Help! PS this could be a software issue or user?

  Do you have a case on your phone? It seems that the proximity sensor is processing the phone as if it were close to your face. A case or a screen protector can cause problems if it includes the proximity sensor - near the earpiece.

• After my computer blocked the secondary screen turns black.

  Former title: Second monitor fades when locking computer

  Hello

  I scoured the interwebs for a solution or even an explanation of this problem and have not found a thing. When I lock my workstation at the office, at the forefront of my second monitor turns black (however I can still see my cursor) and I see the screen of my computer locked on my primary monitor.

  It was like that, because they put me on Windows 7 and I would like to disable it if I could, if for no other reason it takes absolute ages to get the screen to respond to the keyboard entry, then takes even more time to restore my desktop computer.

  Also, I think that it a little ruin the aesthetics of the workstation and sometimes I return to my office and am still wondering if anyone has played a trick my unplug my monitor or turn it off.

  Thank you.

  Hello
   
  
  If you lock the computer, the primary monitor will display the lock screen and the secondary monitor will remain black. This behavior is by design in Windows 7. Because your computer is locked, so your data is safe on the computer.
  
  Hope this information is useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite A100 - display balack after replacing the LCD screen

  Hello

  So I'm trying to fix a LCD on a Satellite A100. The girl I am set as said she accidentally hit the screen with his hand and became black.

  When you turn on the laptop I can here windows activate, nothing is on the LCD screen. It is not the backlight, because I don't see anything on the screen at all. So I bought a replacement LCD screen and that one does not work either. Same question

  I think it is the inverter, any suggestions?

  Could be the sensor cover?

  Thank you! Kyle

  Hi Kyle,.

  Did you buy this new LCD screen to a service provider authorized? I ask this question because it would be interesting to know if it s a Toshiba valid a party or 3rd party a spare.

  Did you check the connection of the LCD cable? There may be a link to lose or the cable itself is touched.
  Theoretically, it might be the FL inverter too, but I doubt that. Otherwise, you'd see something on the screen but very dark.

• Vertical lines on the LCD screen of the Qosmio G20

  Hi all

  My Toshiba laptop shows a few vertical lines on the right side of the screen and the number of lines that appear are increasing day after day
  I have connected to an externel disply and Born no problem with that so I'm quiet sure that this is the problem with the lcd screen.

  My laptop is not so much in a guarantee period is this screnn is reapairable or not

  Please help me.

  Please see the attached images

  [http://picasaweb.google.co.in/meetabhilash/Toshiba?feat=directlink | http://picasaweb.google.co.in/meetabhilash/Toshiba?feat=directlink]

  regarding
  AERTS

  Why did you create a second thread on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=139420

  It s easier than a single thread and, therefore, you must follow your first topic!

• Black horizontal lines on the LCD screen at a specific time during the start and stop

  Hi, I am currently using a Presario CQ61 Notebook PC.  My problem, as indicated in the title, are black lines on the LCD screen, apparently when the screen is reset or enclose itself turned off during the start and stop only. From the judgment, he produced a split second her stops the hard drive, after that the screen is black. The lines and then quickly disappear. At startup, lines appear after the Windows logo has passed and the screen went from black to start loading the login screen.

  The LCD is in perfect condition, all using the PC. No line, no discoloration, etc.. Nothing extraordinary either. The problem does occur only during these two periods, specifically. I am also unable to note the lines when I'm looking directly at the screen. I have to be standing next to the PC, at an angle.

  Now, I had this PC for a considerable amount of time, however, I never paid much attention to the screen when starting upwards or stop, so this could definitely be something that the laptop has done since I bought it. I also read on similar problems, and it could be an outdated video driver or BIOS.

  I want to just make sure that it is not a major problem. Thank you all!

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  1) click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility. Under the Services tab, click to select the hide all Microsoft services check box, and then go to tap Start , click on disable all. Click apply OK restart the device.

  (2) please visit the HP website and update the Bios and graphics drivers on the unit.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.

• On the Satellite A210-14 t LCD screen turns black randomly

  For several days, I have the problem, my lcd screen turns black all of a sudden, the 'photo' is just disappearing. but the backlight is still and the system is still running (which happens most of the time in battery mode)
  When I close the laptop, pc goes into stand-by mode and so I open the pc again and the screen works again
  But this isn't really a solution.
  What can I do? Fresh grafix drivers are installed.

  BTW:
  I use WinXP

  HM, how long do you want the machine. Maybe you should check the powersaver for battery operation parameters when the display is sharp because it can be a characteristic powersaver the screen turns off.

  If please check your powersaver settings and set the time when the screen turns off at maximum or turn it off, then check if the error appears again.

  Would appreciate the your part feedaback. :)

  Welcome them

• New Satellite A350 - dirt inside the LCD screen

  Someone at - experienced this kind of problem? The laptop is new (bought today). "Dirt" covers about 5 pixels (it is not regular) and looks like a gray shadow. Unfortunately, it is placed in a very bad place get my attention: /.

  I am sure that these aren't the dead/stuck pixels because I can see it even if the laptop is turned off. To be 100% sure, I did a picture of this 'anomaly' and when I Zoom I see that the pixels work correctly but there is a grey "smudge" above them. I want to download the pictures, but I left my cable somewhere elese.

  Can someone tell me if it is covered by the warranty or would I meet problems if I ask for a panel replacement for laptop / LCD monitor?

  Thanks in advance for answers!

  Post edited by: JustDidIt

  I agree with Akuma.
  If something like this happens it is certainly covered by the warranty and authorized maintainer can help you with this.
  Addresses and phone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Good luck!

• Satellite M60: grey spots on the LCD screen

  It seems that I have a problem with my Satellite M60. I noticed a few more dark spots on the LCD screen. Looks like the screen is dirty (grey size spots about 5-6 pixels), but it seems to be not in the surface of the screen, but on the inside (the surface is perfectly clean) and, certainly, is not the problem of dead pixels or subpixels.

  Is it possible that there is little dust inside of screen? Is it possible to clean it somehow? Such a strange thing is covered by the standard warranty?

  Hi Fox

  Possible it s not a BIOS issue. Of course, I read the other case, but perhaps it s not the same question.

  But do not forget that you are using the good BIOS!
  A lot of users here uses a bad BIOS or bad BIOS procedure.
  In addition, the BIOS version performed from 14/09/06. That is why it s not very old updated.

• Using the "back button" update for the LCD screen on the 60 d

  I used this method all the time, but now when I push on the development of the "back" button, it snaps as it is to take a picture, but no image is recorded on the SD card. When I look through the viewfinder and use the button "return" of discussion, it works perfectly.  I would like to know how to get back to the old method of development on the LCD screen, with the emphasis of the "back" button.  My Canon is a 60 d

  pixeltaker wrote:

  I used this method all the time, but now when I push on the development of the "back" button, it snaps as it is to take a picture, but no image is recorded on the SD card. When I look through the viewfinder and use the button "return" of discussion, it works perfectly.  I would like to know how to get back to the old method of development on the LCD screen, with the emphasis of the "back" button.  My Canon is a 60 d

  You must go to the menu and move the quick mode to Live Mode.  In fast mode, when you press on the "back" button, the mirror flips down (click) and the camera tries to focus.  He has not yet made the photo.  To take a photo, you must listen to the AF confirm beep, then press the shutter button.  Quick mode is in fact the "snail", in my opinion .  Read more about this on page 160-168 of this manual.

  

• How can I get the screensaver to stop after a few minutes, while the screen turns off.

  original title: computer sleeps

  I leave my computer on all night.  When I'm done with it for the day, after 5 minutes, the screen saver turns on.  How can I get the screensaver to stop after a few minutes, while the screen turns off.  What we call that?  Sleep is - this Mode?  Hibernate? Thank you!

  Hi miztex37,

  ·         You want to put the computer in sleep mode?

  See the following article to see if it helps.

  Microsoft Windows XP - automatically put your computer into standby mode

  See also:

  Microsoft Windows XP - manually put your computer in sleep mode

• How can I fix lines horizontal randomly and glitter for the LCD screens for HP Pavilion dv5 Vista?

  How can I correct random lines horizontal and glitter for the LCD screens for windows vista HP Pavilion dv5? Only, it happens randomly and can get all a few minutes at a time every few hours. The entire screen white and black and horizontal lines will appear during the flickering on the half top of the screen only. Nothing else changes. My sound is immutable, and none of my screens change the size or location. However, they may appear up and down during the flashing. Can someone give me an idea of what is wrong? I looked on Google for possible corrections, but most of them seem to be for refresh rate and I don't have a notch for this and can't change it according to the steps they offer.

  Read my initial response on what it takes to please.

  "See if this helps you:

  These lines indicate corruption graphics driver or lack of graphic material.

  Go to the HP Web site > Search a drivers and download article > search your laptop model number > your operating system > drivers for it: either video / graphic / Chipset (according to the wording it) > download and install the drivers.

  http://WWW8.HP.com/us/en/support-drivers.html

  If that fixed it, it seems to me be a problem of graphic material.

  Because it's a laptop; If under warranty, contact HP.

  If is not under warranty, contact a repair shop, local. »

  See you soon.