Gigashot K40HE - update the firmware on the SD card does not work

Hello

IBought a Gigashot K40HE 2 years and everything was good until he stopped keep the date in mind.

I had the assistance of Toshiba phone told me to update the firmware with the following procedure:
1. prepare a formatted, empty SD card.
2. Insert an SD card to the card reader. Copy the firmware file
(file name must be "psd.bin") in the SD card. Make sure that the new firmware file is copied to the SD card.
3. Insert the SD card into the DV.
4. Insert the battery in the DV.
5. Insert the adapter in the DV. (dual power supply)
{color: #ff0000} 6. press on "Power button" to power. Then the LCD displays 'FWUPDATE YES OR NO'. Select "YES".
and press 'OK '. The DV will update automatically the FW. {color}
7. after that the FW update completed. LCD display will show "OK". And then, will auto power off.

Everything was good until 6... The DV starts as shown. It justs starts normally, asking me to set the date as every time I turn on my DV.

I tested with a SD card that usually work on other devices, so I guess that the card is not defective. It's a card SD transcend 1 GB 45 x. And I know that the card is seen by the DV, because it creates folders on it for recording photo or video.

Has anyone an idea to help me sort this out?

Best regards
Ozhades

Hello ozhades,

before you start an update of the firmware, it is very important the battery completely full.

After the battery is fully charged please do the fw update again.

Best regards

Tags: Toshiba

Similar Questions

  • I can't get my updates. the Windows Installer does not work how to fix it

    I can't get my updates. and I can not install other programs. the Windows Installer does not work. How can I fix?

    http://support.Microsoft.com/kb/2438651#reso1

    See the above article, I suggest you use not Fixit, but it's your choice.

    For manually fixit it you follow the steps in the resolution.

    fyip

  • Qosmio modem: after update the modem driver does not work

    Qosmio F10-145 with WSP2 MCE.
    Yesterday, I installed Phone Dialer Pro. Then, I realized that the microphone did not work with this program.
    The help file suggested upgrade modem driver that I then downloaded from the Toshiba site.
    It was the last time that my modem was working.
    I tried everything: from the update to restart in SafeMode as administrator, remove the driver and reinstall it from the Tools CD, use SFC and all I get is an 'access denied' message at the end of the installation process.
    System Restore doesn't work anymore as the last point of available restoration after the "Reinstall".
    I called help line of Toshiba which suggested resettlement of the entire system using the recovery CD... That would take days (programs, updates, mail files + digital certificates...).
    The last option that is somewhat like a spare wheel, as it has to install an external modem PCMCIA. This worked well but is frustrating because there is a modem already installed.
    Also, why don't I have any problem installing external modem, but cannot install one that is already there?
    Any suggestion?

    [Edited by: admin on 24 June 05 19:18]

    Hello

    As far as I know Toshiba Software modem is connected to COM 3.

  • Move to the SD card does not work in Lollipop

    Button to go to the app is not dimmed. I can click on them and they change to "move to SD" to "move to phone". In fact, the screen shows me only 20 MB is left on the device, and 2 GB are on the SD card of the application. But when I go on my SDCard folder where the OB files are supposed to be empty, and my internal memory available has not changed. Samething happened to all applications that I tried to pass. The phone tells me the apps have been moved, but they did not.

    Rickard posted something on this http://talk.sonymobile.com/t5/Software-Updates/Apps-moved-to-SD-card-still-reserve-space-in-internal...

  • Printing & working copy, but savings from the memory card does not work

    Photosmart Prem C310 printer with current driver and firmware

    Wireless connection

    PC is Windows 7

    When I try to record from memory card to the PC I get the message, «!» No set up.  You must install the software for the device. "on the touch screen of the printer.  What Miss me?

    Hi LZimmerman,

    Follow these steps to map the card reader

    1. Insert the memory card into the printer
    2. open my computer
    3. click on network drive mapping
    4 Select the letter of the drive you want and enter the folder \\192.168.1.101\memory_card

    Note: replace the 192.168.1.101 with the IP address assigned to your printer.
    5. click on finish, and the Player opens for access to the files

  • Creative cloud updated the desktop app does not work but but also quit smoking. On Mac 10.9.5.

    Downloaded update two days ago. Now the menu bar icon is grayed out. When you click on it there's only an icon of spinning. Quitting smoking is grayed out and help and Open Window do nothing. There is no way I can see to do a force quit.

    I tried access to read/write setting for libraries and tried to uninstall, but I get an error message saying that the program to run on my computer applications, so it cannot be uninstalled.

    Like I can't quit I don't know what to do.

    Thank you

    Launch the activity monitor and force them to leave Adobe all processes as Cloud Creative Core Sync, AAMupdater, Adobe Crash Demon... etc



    Use the link below and run CC uninstaller and uninstall the Adobe Creative Cloud application:

    Using creative cloud | Uninstall the creative cloud desktop application

    Follow the procedure below:

    N ° 1)

    Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

    (Applications > Utiliites)

    Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

    Step 2)

    Trash Adobe Creative cloud from Applications Eh well.

    Step 3)

    (1) right-click on the icon in the Finder, then select the option "Go-ToFolder .

    (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

    ~/Library

    (3) then navigate to Application Support > Adobe.

    Open the Adobe folder and 2 trash files named AAMUpdater and OOBE.

    Step 4)

    (1) right-click on the icon in the Finder, then select 'Go - To' folder.

    (2) you will get a text box, type in the following command and then press the 'return '.

    / Library

    (3) then navigate to Application Support > Adobe.

    Open file Adobe and trash 3 folders named AAMUpdater ,Adobe Application Manager and OOBE.

    Step 5)

    Click on the link below and download & run the cleaning of Adobe tool:

    If necessary, select the option "Adobe Application Manager for Mac OS X 10.6" and click on ""clean Selected " ."

    https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

    Step 6)

    (1) if it please click on the icon of the Apple menu and select System Preferences, then click Network.

    (2) choose the network that is currently connected to the internet can you Ethernet or Airport (Wireless).

    (3) then click on the Advanced button, then click proxies.

    (4) slot 'Select a Proxy Server to configure' uncheck all the boxes proxy, then uncheck 'use passive FTP Mode (PASV) ". "

    (5) then click on the Apply Now button.

    Step 7)

    Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

    https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

  • Since the last update, the navigation bar does not work

    Firefox opens now in 18 seconds instead of 10 minutes, but the navigation bar is 'dead '. I can type an address, but I can't go there.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

    Another possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • No sound from the computer but the sound card does not work correctly

    I have a new computer, but can't get any sound through the screen (not new).   The system tells me that I have a sound card and that it works correctly.   Any ideas?

    Hello

    ·          What version of the operating system is installed on the computer?

    ·          When the issue started?

    However, try the steps in the following article:

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  • Firefox automatically updated itself, would not add new bookmarks, then deleted all mine, will not always add new, now the back button does not work. I'm Livid.

    I think I'm on Firefox 13.0. He put itself as part of the update of my computer up to date (at least I guess that's what happened, because it has changed). I noticed yesterday that he would not favorite Web sites, but I thought it was just the website or bookmarks have been full-time or something. Today, I tried to remove a few bookmarks to make more, but they would not remove. I tried to register a new site, and it wouldn't work. I tried to close/exit firefox and re-opening of the program. While the program was closed, I installed the next set of updates on my computer. When I have opened firefox, all my favorites, and the tab menu (or what you call personal small bar on the actual tabs) were gone. I can't always favorite of new sites, so I can't even re-do all my favorites (and I got a lot, all of them arranged so it's a big loss and incredibly annoying). Then I realized that the back button does not work. And the cursor remains on the typing that I symbol, it does not change the arrow, when I click on a link.

    One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

    You can also try to repair the database of places with this extension:

  • updates installed live mail and now the spell checker does not work

    updates installed live mail and now the spell checker does not work

    You will find support for Windows Live Mail in this forum: http://windowslivehelp.com/forums.aspx?forumid=b91657c9-9031-4406-a398-7d0783119bb7

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

    Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

    Any ideas out there?
    I know the pro 2 surface is not the real model, but at least it should work fine.

    arwinq,

    You can see the system requirements, including the maps here.

    https://helpx.Adobe.com/Illustrator/system-requirements.html

    but I fear that you may be taken in this GPU issue described by butz in post #13 here:

    https://forums.Adobe.com/message/7773402#7773402

    You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

  • I need help. I updated Adobe cc and now my photoshop does not work. Here is the error message:

    ' I need help. I updated Adobe cc and now my photoshop does not work. Here is the error message:


    Problem event name: APPCRASH

    Application name: Photoshop.exe

    Application version: 16.0.0.88

    Application timestamp: 55681d 39

    The default module name: StackHash_76b2

    The default module version: 0.0.0.0

    The default module timestamp: 00000000

    Exception code: c0000005

    Exception offset: 0000000000000006

    The system version: 6.1.7601.2.1.0.768.3

    Locale identifier: 3084

    Information extra No. 1: 76 b 2

    Information extra No. 2: 76b2e5a7b24373bbe6f47563f13e47b1

    Information extra No. 3: 51ff

    Information extra No. 4: 51ff68a42cf4d2164e10e22e1f794f34


    Hi Oscar,.

    Please see the thread below:

    Photoshop CC 2015 crashing?

    You can also check: 2015 release of Photoshop CC: FAQ

    Kind regards

    Sheena

  • my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

    my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

    You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

    Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

    Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

    Step 1

    VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

    Step 2

    When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

    /Library/LaunchDaemons

    In the Finder, select

    Go ▹ go to the folder...

    from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

    A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

    There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

    Step 3

    In the LaunchDaemons folder, there may be one or more files with the name of this form:

    com Apple.something.plist

    When something is a random string, without the letters, different in each case.

    Note that the name consists of four words separated by dots. Typical examples are:

    com Apple.builins.plist

    com Apple.cereng.plist

    com Apple.nysgar.plist

    There may be one or more items with a name of the form:

    com.something.plist

    Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

    These names consist of three words separated by dots. Typical examples are:

    com.semifasciaUpd.plist

    com.ubuiling.plist

    Sometimes there are items (usually not more than one) with the name of this form:

    com.something .net - preferences.plist

    This name consists of four words (the third hyphen) separated by periods. Typical example:

    com.jangly .net - preferences.plist

    Drag all items in the basket. You may be prompted for administrator login password.

    Restart the computer and empty the trash.

    Examples of legitimate files located in the same folder:

    com.apple.FinalCutServer.fcsvr_ldsd.plist

    com Apple.Installer.osmessagetracing.plist

    com Apple.Qmaster.qmasterd.plist

    com Apple.aelwriter.plist

    com Apple.SERVERD.plist

    com Tether.plist

    The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

    Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

    If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

    If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

    Step 4

    Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

    ▹ Safari preferences... ▹ General

    and click on

    Set on the current Page

    If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

    The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

    Step 5

    The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

    Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

    Step 6

    This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

  • As I installed the latest OS 10.0.1 on my iPhone, the Pandora app does not work.

    As I installed the latest OS 10.0.1 on my iPhone, the Pandora app does not work.

    Have you installed the latest update of Pandora (version 7.6), posted on September 13, 2016?

  • How to copy and paste into the search engine does not work?

    How to copy and paste into the search engine does not work?

    It should be.

    Restart your Mac and try again.

    Other than that, make sure that OS X is updated.

    Open the App Store, and then select the updates menu.

Maybe you are looking for